Doctoral Thesis
Refine
Document Type
- Doctoral Thesis (15) (remove)
Has Fulltext
- yes (15)
Is part of the Bibliography
- no (15)
Keywords
- Plasmadiagnostik (15) (remove)
Institute
Die Forschung an mikrowelleninduzierten Atmosphärendruckplasmen am INP führte zu verschiedenen potentiellen Applikationen. Dabei besitzt die mikrobiologische Dekontamination sowohl von thermolabilen Medizinprodukten als auch von Lebensmitteln schon zum jetzigen Zeitpunkt ein hohes industrielles Anwendungspotential. Den aufgeführten Anwendungen gemeinsam ist, dass für eine erfolgreiche Weiterentwicklung der Prozesse, sowie der Plasmaquelle, ein grundlegendes Verständnis der vorliegenden dynamischen Mikrowellenplasmawechselwirkung notwendig ist. Durch den begrenzten diagnostischen Zugang der zu untersuchenden Plasmaquelle wird ein kombinierter Ansatz aus diagnostischen Methoden und Modellierung gewählt. Die Entladung wird in Argon bei reduziertem Druck (ab 10 mbar) zur Vereinfachung des Modells betrieben. Daher musste die Plasmaquelle für diesen Einsatz weiterentwickelt werden. Dieses beinhaltet die Neuauslegung der Prozesswärmeabfuhr, auf Grund der nicht oder nur teilweisen Anwendbarkeit von etablierten Verfahren im Atmosphärendruck (hohe Gasflüsse, Wasserkühlung). Die Plasmamikrowellenwechselwirkung dieser Quelle ist anschließend mit Methoden zur Charakterisierung des Plasmas und des Mikrowellenfeldes für unterschiedliche Arbeitspunkte in Druck und Leistung untersucht worden. Zur Bestimmung der Elektronendichte des Plasmas wurde ein frequenzvariables Mikrowelleninterferometer auf Basis eines Vektornetzwerkanalysators erstmalig etabliert. Dieses neue Messsystem wurde im Vorfeld detailliert untersucht, um das korrekte Zusammenspiel aller Komponenten zu überprüfen. In diesem Zusammenhang wurde ein frequenzaufgelöstes Mikrowelleninterferometer zur Messung der Elektronendichte in einer Fluoreszenzlampe aufgebaut. Durch diesen neuartigen Ansatz konnte der Einfluss der dielektrischen Umhüllung (Glasrohr der Lampe) auf die Mikrowelleninterferometrie untersucht werden. In einer weiteren Untersuchung an einem Induktiv Gekoppelten Plasma wurden die Resultate dieses Messsystems mit denen von Langmuir-Sondenmessungen. Auf Grund der konstruktiven Gegebenheiten des Reaktors ist das Plasma nur über ein Fenster für das Mikrowelleninterferometer zugänglich. Der Vergleich der ermittelten Elektronendichten ergab einen Unterschied von Faktor zwei zwischen Interferometer und Langmuir-Sonde. Die Untersuchungen an der Fluoreszenzlampe und dem Induktiv Gekoppelten Plasma zeigten zum einen die korrekte Funktion des neu etablierten frequenzvariablen Mikrowelleninterferometers mit erreichbaren Phasenauflösungen unterhalb von 0,1 mrad. Zum anderen wurde festgestellt, dass die dielektrische Umhüllung des Plasmas zu einem systematischen Fehler von bis 53 % bei der Elektronendichtebestimmung führen kann. Diese gewonnenen Erkenntnisse hatten bei der Konzipierung des Mikrowelleninterferometers zur Untersuchung der Plasmamikrowellenwechselwirkung einen entscheidenden Einfluss. Neben der Untersuchung des Plasmas ist ebenfalls eine Diagnostik des Mikrowellenfeldes nötig, um die Plasmamikrowellenwechselwirkung dieser Entladung experimentell zu charakterisieren. Auf Grundlage dieser Daten können die Resultate des Modells bewertet werden, die einen Einblick in die Plasmaquelle und ihrer dynamischen Vorgänge erlaubt, was für die Weiterentwicklung der Applikationen essentiell ist. Aus diesem Grund ist ein heterodynes Reflektometer entwickelt worden. Dieses Messsystem wurde umfangreich getestet und kann mit einer maximalen Zeitauflösung von 100 ns den komplexen Reflektionsfaktor mit einer Phasengenauigkeit von 10 mrad bestimmen. Das Reflektometer erlaubt einen experimentellen Zugang zur aktiven Zone schon in der Frühphase der Entladung. Mit Hilfe der Diagnostiken zur Untersuchung des Plasmas und des Mikrowellenfeldes wurde die Entladung von der Zündung bis zur stationären Phase charakterisiert und mit den Ergebnissen des Modells verglichen. Es zeigte sich eine gute Übereinstimmung im Millisekundenzeitbereich, sowie eine starke Dynamik im Reflektionsfaktor in der ersten Millisekunde, hervorgerufen durch die Plasmamikrowellenwechselwirkung. Durch die hohe Zeitauflösung des Reflektometers konnten diese Vorgänge im Mikrosekundenzeitbereich erstmalig experimentell aufgelöst werden, was die Interpretation mittels des Modells möglich macht. Es konnten die Vorgänge während der Zündung des Plasmas detailliert untersucht werden und damit die Richtigkeit von Annahmen, die bei der Entwicklung der Zündtechnologie getroffen wurden, überprüft werden. Dieses erworbene grundlegende Verständnis ermöglicht eine Weiterentwicklung dieser Technologie. Mit Hilfe der erzielten Ergebnisse wurde eine neue Optimierungsstrategie für die Abstimmung der Mikrowellenplasmaquelle entwickelt. Dies führte zu einer wesentlichen Verbesserung der Reproduzierbarkeit der mikrobiologischen Ergebnisse. Darüber hinaus bilden die erzielten Ergebnisse eine solide Grundlage für weitere experimentelle und theoretische Untersuchungen dieser Entladung in beispielsweise anderen Arbeitsgasen.
This thesis is devoted to experiments on three-dimensional dust clouds which are confined in low temperature plasmas. Such ensembles of highly electrically charged micrometer-sized particles reveal fascinating physics, such as self-excited density waves and vortices. At the same time, these systems are challenging for experimental approaches due to their three-dimensional character. In this thesis, new optical diagnostics for dusty plasmas have been developed and, in combination with existing techniques, have been used to study these 3D dusty plasmas on different size and time scales.
This thesis highlights the impact of surface charges and negative ions on the pre-ionization, breakdown mechanism, and lateral structure of dielectric barrier discharges operated in binary mixtures of helium with nitrogen or electronegative oxygen. Sophisticated diagnostic methods, e.g., non-invasive optical emission spectroscopy and the electro-optic Pockels effect as well as invasive laser photodetachment and laser photodesorption, were applied at one plane-parallel discharge configuration to investigate both relevant volume and surface processes. Moreover, the experimental findings were supported by numerical fluid simulations of the discharge. For the first time, the memory effect of the measured surface charge distribution was quantified and its impact on the local self-stabilization of discharge filaments was pointed out. As well, it turned out that a few additional seed electrons, either desorbed from the charged dielectric surface or detached from negative ions in the volume, significantly contribute to the pre-ionization resulting in a reduced voltage necessary for discharge breakdown. Finally, effective secondary electron emission coefficients of different dielectrics were estimated from the measured breakdown voltage using an analytical model.
The absolute density of the metastable N2(A,v=0) molecule was extensively studied in nitrogen barrier discharges at 500 mbar. For the detection of the metastables laser-induced fluorescence spectroscopy (LIF) was used, at which for the calibration of the absoute metastables density a comparison with Rayleigh scattering was performed. To get the ratio of the LIF signal to the Rayleigh signal it is shown that the LIF signal is the convolution of the Rayleigh signal with an exponential decay. Besides, the different cross sections are calculated and the ratio of the detection sensitivities at the laser and fluorescence wavelength is determined. As a first step on the way to atmospheric pressure barrier discharges, the laser-induced fluorescence spectroscopy was implemented in low pressure capacitively coupled radio-frequency discharges. The determined metastables density in the capacitively coupled radio-frequency discharge is somewhat below 10^12 cm^(-3) at 40 Pa and somewhat below 10^13 cm^(-3) at 1000 Pa. The axial density profiles show a nearly symmetric shape due to the long lifetime of the metastable state. At a pressure of 500 mbar the two discharge modes of the barrier discharge, the filamentary and the diffuse mode, were analysed. The filamentary mode was mainly investigated in an asymmetric discharge configuration. Typical densities in the detection volume are in the range of 10^13 cm^(-3), resulting in maximal densities of up to 10^15 cm^(-3) in the microdischarge channel. Such large densities are in agreement with the fast decay by the pooling reaction after the maximum of the metastables density in the afterglow of the discharge pulse. The time dependent measurements in the afterglow of single microdischarges offer a delay of the metastables production with respect to the discharge current. This delay indicates that the metastables production takes place mostly by cascades from higher triplet states, which are in turn excited by electron impact. The axial density profiles show a maximum in metastables density in front of the anode in agreement with optical emission spectroscopy, but which cannot be clearly identified because of the asymmetric discharge configuration. The measurements for the diffuse discharge mode were performed in a symmetric discharge configuration. The metastables density is in the range of 10^13 cm^(-3). It increases during the current pulse of the discharge and decays afterwards. The maximum of the metastables density is delayed with respect to the maximum of the discharge current. The depletion of metastables in the early discharge afterglow is dominated by the pooling reaction, afterwards quenching by nitrogen atoms becomes important assuming a nitrogen atom density in the order of 10^14 cm^(-3). As for the filamentary mode, the losses by diffusion are negligible for the measurement positions. The measured axial density profiles show an accumulation of metastables in front of the anode, whereas the density in front of the cathode is below the detection limit. To calculate the metastables current density to the dielectrics after the discharge pulse a simulation is developed including the dominant volume processes for the depletion of metastables and the axial diffusion. Starting point for the simulation is the axial metastables density distribution at the end of the discharge pulse. The calculated metastables current density at the dielectrics is in the range of 10^14 cm^(-2)s^(-1). With the use of recently calculated secondary electron emission coefficients a comparison of the secondary electron emission by metastables with the discharge current is done. It is figured out that the secondary electron emission current is large enough to be important during the discharge ignition. To expand the simulation to the whole voltage cycle, the excitation of metastables is assumed to be proportional to the discharge current and electron density. Using this model, the measured time dependences of the metastables density are well reproduced for the investigated parameter variations. This is not the case for the axial profiles, where a metastables loss process is missed to explain the formation of a density plateau in front of the anode during the discharge pulse. The intended calculation of the metastables current density shows that the delay of the metastables production with respect to the discharge current might be responsible for the ignition of microdischarges at the beginning of the discharge pulse.
The active screen plasma nitrocarburizing (ASPNC) technology is a state-of-the-art plasma-assisted heat treatment for improving surface hardness and wear resistance of metallic workpieces based on thermochemical diffusion. In comparison to conventional plasma nitrocarburizing, the use of an active screen (AS) improves thermal homogeinity at the workload and reduces soot formation. Further it can serve as a chemical source for the plasma processes, e.g. by use of an AS made of carbon-fibre reinforced carbon. This compilation of studies investigates the plasma-chemical composition of industrial- and laboratory-scale ASPNC plasmas, predominantly using in-situ laser absorption spectroscopy with lead-salt tuneable diode lasers, external-cavity quantum cascade lasers, and a frequency comb. In this way the temperatures and concentrations of the dominant stable molecular species HCN, NH3, CH4, C2H2, and CO, as well as of less prevelant species, were recorded as functions of e.g. the pressure, the applied plasma power, the total feed gas flow and its composition. Additionally, the diagnostics were applied to a chemically similar plasma-assisted process for diamond deposition.
Resulting from this thesis are new insights into the practical application of an AS made of CFC, the plasma-chemistry involving hydrogen, nitrogen, and carbon, and the particular role of CO as an indicator for reactor contamination. The effect of the feed gas composition on the resulting nitrogen- and carbon-expanded austenite layers was proven by combination of in-situ laser absorption spectroscopy with post-treatment surface diagnostics. Furthermore this work marks the first use of frequency comb spectroscopy with sub-nominally resolved Michelson interferometry for investigation of a low-pressure molecular discharge. This way the rotational bands of multiple species were simultaneously measured, resulting in temperature information at a precision hitherto not reached in the field of nitrocarburizing plasmas.
The thesis describes experimental results based on optical diagnostics of low- pressure discharges. The models, which are necessary for the interpretation of the experimental data, are developed and simulations are done. The contents can be categorized into the following topics: 1) the time-resolved tunable diode laser absorption spectroscopy of excited states of argon in pulsed magnetron discharge and modeling the plasma afterglow; 2) optical emission- and laser absorption spectroscopy of excited states of argon in radio-frequency (rf) discharge and calculation of the escape factor for self-absorption; 3) fast video recording of the oscillatory motion of a dust particle in rf discharge and analysis of the data.
Im ersten Teil der Arbeit wird der erfolgreiche Aufbau einer Diagnostik zur quantitativen Bestimmung von Oberflächenladungsdichten beschrieben. Das Messprinzip bedient sich des elektro-optischen Pockelseffekts eines BSO-Kristalls, der in der Entladungszelle als Dielektrikum eingesetzt ist. Diese Methode arbeitet zeitlich und lateral aufgelöst, was die Untersuchung der Dynamik von Oberflächenladungen auf drei verschiedenen Zeitskalen ermöglicht. Die erste Zeitskala liegt in der Größenordnung von einigen 100 ns. Damit kann erstmals die Deposition von elektrischer Ladung auf einer dielektrischen Oberfläche während eines Entladungsdurchbruchs beobachtet werden. Die Deposition beginnt im Zentrum eines zuvor deponierten Ladungsspots. Die Polarität der neudeponierten Ladung ist der des ursprünglichen Ladungsspots entgegengesetzt. Die Folge ist, dass die absolute Ladungsdichte im Zentrum im Verlauf einiger hundert Nanosekunden kleiner wird als in den Randbereichen. Der Umladungsprozess wird so lange fortgesetzt, bis das elektrische Feld der neu deponierten Ladungen dem äußeren Feld so stark entgegenwirkt, dass die Spannung zur Aufrechterhaltung der Entladung unterschritten wird und die Entladung erlischt. Die zweite untersuchte Zeitskala liegt in der Größenordnung der Periodendauer der externen Spannung. Im Nulldurchgang der Spannung liegen zeitlich stationäre Ladungsdichteverteilungen auf dem Dielektrikum vor. Die Geometrie eines mittleren Ladungsspots wird in Abhängigkeit der anliegenden Spannungen und des Gasdrucks untersucht. Einerseits ist der Spotradius abhängig von den Ionisationsprozessen im Volumen, weil die Dichte der Raumladungen die Stärke des Elektronenfokus in das Innere der Entladung steuert. Andererseits wird die Spotbildung durch eine laterale Drift von Ladungsträgern kurz vor der Oberfläche aufgrund des elektrischen Feldes deponierter Ladungsträger beeinflusst. Die dritte untersuchte Zeitskala liegt in einer Größenordnung von Sekunden. Im Fall einer initial homogenen Oberflächenladungsverteilung nimmt die mittlere Ladungsdichte in einer Größenordnung von Sekunden monoton ab. Dieser Prozess stellt einen Ladungsabbau dar, dessen zeitliches Verhalten durch zwei überlagerte Exponentialfunktionen beschreiben ließ. Dadurch werden zwei Ladungsträgerpopulationen im BSO angenommen, die verschieden abgebaut werden. Im Fall einer initial inhomogenen Ladungsdichteverteilung wird ein Transport elektrischer Ladung auf der BSO-Oberfläche in einer Größenordnung von Sekunden beobachtet. Es wird weiterhin erstmals die durch einen Atmosphärendruck-Plasmajet deponierten Ladungen auf BSO zeitaufgelöst gemessen. Die zeitliche Entwicklung der Oberflächenladungen kann mit der Messung des elektrischen Stroms an einer der Ringelektroden des Jets korreliert werden. Dadurch wird geschlossen, dass der Ladungsaustauch nicht direkt durch einen Bullet verursacht wird. Er erzeugt stattdessen einen elektrisch leitfähigen Kanal zwischen der Düse des Jets zur BSO-Oberfläche. Infolgedessen kann Ladung, die sich auf der Innenseite der Jetkapillare befindet, auf den BSO-Kristall transportiert werden. Im zweiten Teil der Arbeit werden Kenngrößen entwickelt, die den Ordnungszustand einer aus Einzelobjekten zusammengesetzten Entladungsstruktur quantitativ beschreiben. Die Kenngrößen werten dabei die laterale Leuchtdichteverteilung der Entladungsemisssion, u.a. auf Basis der Tripel-Korrelationsfunktion. Dabei werden zwei separate Bifurkationsspannungen zwischen einer hexagonalen und einer ungeordneten Anordnung beobachtet: Bei der Verringerung der Spannung wird zunächst der Bifurkationspunkt der azimutalen Ordnung durchlaufen und anschließend der Bifurkationspunkt der radialen Ordnung. Die Systeme gehen jeweils in einen Zustand geringerer Ordnung über. Die Ursache des Ordnungsverlusts ist das zunehmende Fehlen von Entladungsspots, was im Mittel zu einer geringeren Wechselwirkung der Spots untereinander führt und das System an Freiheitsgraden gewinnt. Im dritten Teil dieser Arbeit wird erstmals ein Ansatz verfolgt, der die Steuerung lateral strukturierter Entladungen ermöglicht. Dafür wurde ein Aufbau konstruiert, bei dem ein gekühlter Halbleiter als Dielektrikum in der Entladungszelle dient. Dessen externe Beleuchtung führt bei einer anliegenden Spannung zu einer Änderung des Spannungsteilerverhältnisses der kapazitiven Elemente und schließlich zu einer lokalen Erhöhung der Spannung über dem Entladungsraum. Die Größe und Leuchtintensität der durch die Beleuchtung gezündeten Entladung ist stark abhängig von der beleuchteten Fläche, der Leistungsdichte der Beleuchtung und der anliegenden Spannung.
In the last decade a new domain has developed in plasma physics: plasma medicine. Despite the successes that have already been achieved in this exciting new field, the interaction of plasmas with “biological materials” is not yet fully understood. Further investigations in particular with respect to the properties of the applied plasmas sources are therefore essential in order to decode this complex interaction process. Currently, a great variety of different discharge types are used in plasma medical investigation which are generally are operated in noble gases like helium and argon or with dry air. In the present work, the main focuses is on the diagnostics of reactive oxygen and nitrogen species (RONS) resulting from the plasma chemistry of an argon radio-frequency (RF) atmospheric pressure plasma jet (APPJ) and its interaction with the ambient atmosphere. To conduct this study, a commercially available plasma device, so-called kinpen is used due to its technical development maturity and its accessibility on the market. As a method of choice, diagnostic techniques are based on optical spectroscopy known to be a reliable tool to investigate plasmas. Consequently, three complementary optical laser diagnostics, namely quantum cascade laser absorption spectroscopy (QCLAS), laser induced fluorescence (LIF) and planar single shot LIF (PLIF), have been successfully applied to the plasma jet itself or its effluent. All of these diagnostics offer a high species selectivity and an excellent spatial and temporal resolution. They are used in this work for i) the characterization of the plasma chemical dynamics with respect to the generation of biological active RONS – in particular for the case of N2 and O2 admixtures. ii) the measurement of the NO density profile in the plasma effluent iii) the investigation of the flow characteristics of the neutral gas component (laminar vs. turbulent) and its influence on the plasma chemistry. Numerical analysis have been carried out in collaboration with PLASMANT (University of Antwerp) via kinetic simulations of the entire plasma chemistry. Expectingly, atomic oxygen (O) and nitric oxide (NO) turn out to be precursors of ozone (O3) and nitric dioxide (NO2). However, it was intriguing to unveil that atomic oxygen and nitrogen metastable (N2(A)) play together a key part --as intermediate species-- in the generation of more stable RONS, e.g. NO. The absolute density of NO space resolved was measured by LIF and absolutely calibrated molecular beam mass spectrometer. LIF was used to determine relative density of OH radical in the plasma plume. 2D-LIF was used to investigate the gas flow pattern with OH as a flow tracer. The results are discussed in details and show different operating mode of the jet, e.g. laminar or turbulent and that the plasma influences these regimes. The first detection and relative measurement by LIF of nitrogen metastable (N2(A)) produced by an argon APPJ is also shortly reported in this work. The outcome of this thesis will bring new insights in the field of argon APPJs chemistry and its interaction with the ambient atmosphere which can be valuable to support plasma modelling and to consider for the applications in plasma medicine.
This thesis describes how the data of the Langmuir probes in the Wendelstein 7-X (W7X) Test Divertor Unit (TDU) were evaluated, checked for consistency with other diagnostics and used to analyse plasma detachment.
Langmuir probes are an electronic diagnostic, and were among the first to be used in plasma physics to determine particle fluxes, potentials, temperatures and densities.
W7X is a large, advanced stellarator, magnetic confinement fusion experiment, operated at the Max-Planck-Institut for Plasma Physics(IPP) in Greifswald, Germany.
Its TDU is an uncooled graphite component, shaped and positioned to intercept the convective heat load of the plasma.
Detachment describes a desirable operation state of strongly reduced loads on this component.
The evaluation of Langmuir probe data relies heavily on models of the sheath, formed at the interface between plasma and a solid surface, to infer plasma parameters from the directly measured quantities.
Multiple such models are analysed, generalised, and adapted to our use case.
A detailed comparison is made to determine the most suitable model, as this choice strongly affects the predicted parameters.
Special attention is paid to uncertainties on the parameters, which are determined using a Bayesian framework.
From the inferred parameters, heat and particle fluxes are calculated.
These are also indirectly measured by two other, camera-based diagnostic systems.
Observations are compared to test the validity of assumptions and calculations in the evaluation of all three diagnostics by checking their results for consistency.
The first comparison, with the infrared emission camera system, shows good agreement with theoretical predictions and reported measurements of the sheath transmission factor, for which we derive and measure a value in W7X.
Parameter dependencies in the quality of this agreement hint at remaining issues.
The second comparison, with the Hydrogen alpha photon flux camera system, shows significant discrepancy with expectations.
These are argued to originate from systematic differences in the measurement locations, which are quantified and related to the magnetic topology.
Langmuir probe observations of individual discharges are analysed to discuss conditions under which detachment occurs, transition into that state and fluctuations observed prior to and during it.
A spatial parametrisation of the data is developed and used to facilitate this.
These observations contribute to the larger aim of understanding particle balance control and fusion plasma edge processes.
The present thesis deals with dynamic structures that form during the expansion of plasma into an environment of much lower plasma density. The electron expansion, driven by their pressure, occurs on a much faster time scale than the ion expansion, owed to their mobility. The high inertia of the ions causes the generation of an ambipolar electric field that decelerates the escaping electrons while accelerating the ions. The ambipolar boundary propagates outwards and forms a plasma density front. For a small density differences, the propagation of the front can be described with the linear ansatz for ion acoustic waves. For a large density differences, experiments have shown that the propagation velocity of such a front is still related to the ion sound velocity. However, the reported proportionality factors are scattered over a wide range of values, depending on the considered initial and boundary conditions. In this thesis, the dynamics during plasma expansion are studied with the use of experiments and a versatile particle-in-cell simulation. The experimental investigations are performed in the linear helicon device Piglet. The experiment features a fast valve, which is used to shape the neutral gas density profile. During the pulsed rf-discharges, plasma is generated in the source region and expands collisionless into the expansion chamber. The computer simulation is tailored very close to the experiment and provides a deeper insight in the particle kinetics. The experimental results show the existence of a propagating ion front. Its velocity is typically supersonic and depends on the density ratio of the two plasmas. The ion front features a strong electric field. The front can have similar properties to a double layer is not necessarily a double layer by definition. The computer simulation reveals that the propagating electric field repels the downstream ambient ions. These ions form a stream with velocities up to twice as high as the front velocity. The observed ion density peak is due to the accumulation of the repelled ions and is located at their turning point. The ion front formation depends strongly on the initial ion density profile and is part of a wave-breaking phenomenon. The observed front is followed by a plateau of little plasma density variation. This could be confirmed for the expansion experiment by a comparison with virtual diagnostics in the computer simulation. The plateau has a plasma density determined by the ratio between the high and low plasma density. It consists of streaming ions that have been accelerated in the edge of the main plasma. The presented results confirm and extend findings obtained by independent numerical models and simulations.