Doctoral Thesis
Refine
Document Type
- Doctoral Thesis (3) (remove)
Has Fulltext
- yes (3)
Is part of the Bibliography
- no (3)
Keywords
- Hydroxyl (3) (remove)
Institute
Surface and electrode modifications allow the alteration of surface and electrode properties required for certain applications. In the first part of this thesis, a pH sensitive graphite/quinhydrone composite electrode for Flow-Injection-Analysis (FIA) systems was optimized by using polysiloxane as binder material. This allows an easier handling of the electrode. Furthermore, new applications of the FIA system in conjunction with the pH sensitive detection system were developed. The electrode used here in conjunction with a common reference electrode proved to be a very useful potentiometric detector for FIA acid-base titrations of aqueous solutions. Even acid-base titrations in buffered solutions were performed successfully with the FIA system allowing the determination of activities of enzymes, which catalyse reactions with increasing or decreasing proton concentrations. A FIA system was applied to measure calcium and magnesium ions in different water samples by measuring the hydronium ion release during the complexometric reaction between EDTA and calcium or magnesium ions. A method was established to determine sequentially the titratable acidity and the pH of different wine samples. The new FIA method fulfils the official requirements of the "Organisation Internationale de la Vigne et du Vin" with respect to reproducibility and repeatability and can be easily adjusted to the legal requirements in USA and Europe. In summary, the first part of this thesis shows that the FIA system in conjunction with the graphite/quinhydrone/polysiloxane composite electrode is very well suited for simple, rapid and automatic determinations of small sample volumes in the areas of water analysis, food analysis or even biochemical analysis, provided that hydronium ions are involved. For all applications, one and the same measuring device without changing the detection system is used. Only different carrier solutions are necessary, which can be provided by a proper stream selector. The second part of this thesis is focused on the modification of gold surfaces of medical devices by treatment with OH radicals. These investigations are based on previous studies of the impact of OH radicals on mechanically polished gold surfaces resulting in a smoothing of the surface by dissolution of highly reactive gold atoms. In this thesis, the effect of OH radicals, generated either ex vivo by Fenton solutions or in vivo by immune reactions, on gold implants was analysed using atomic force microscopy. It was found that there is an analogy between the exposure of gold to Fenton solutions and the exposure of gold to immune reactions. The pre-treatment of gold implants with OH radicals of Fenton solution prevents surface alterations of the gold implants in vivo. This indicates that the in vivo release of gold from implants can be reduced by exposing the gold implants to Fenton solution before implantation. Finally, the modification of gold surfaces by OH radicals was applied to a medical nanodetector, which is coated with a gold layer and functionalized with antibodies, for isolating circulating tumour cells (CTCs) from the blood stream of cancer patients. By treating the gold layer of the nanodetector with OH radicals generated by Fenton solution or by UV-photolysis of hydrogen peroxide, the cytotoxicity of the gold layer after gamma irradiation was reduced to almost zero. This modification of the gold surface with OH radicals allows applying the nanodetector for in vivo applications.
Pharmaceutical residues are found in increasing concentrations in the environment and in potable water where they have verifiable effects on aquatic life. Conventional methods for water treatment are not able to sufficiently abate these generally stable compounds. It was found that physical plasma generated directly in water can degrade several of these recalcitrant organic pollutants. Studies on the basic plasma chemical processes for the model system of phenol showed that the degradation is primarily caused by hydroxyl radicals. This was confirmed by reaction chemistry and spin trap enhanced electron paramagnetic resonance spectroscopy (EPR). The degradation of diclofenac and its by-products were investigated in detail to perform a first risk-assessment of the new technology. Findings are not limited to the application of plasma but applicable to other advanced oxidation processes (AOP) that are based on the generation of hydroxyl radicals as well. Additionally, pulsed corona plasma and pulsed electric fields were assessed for their capacity to kill Legionella pneumophila in water. Whereas it was possible to kill L. Pneumophila with both methods, plasma treatment resulted in an enhanced bacterial killing. Therefore, advanced oxidation processes (AOP) and plasma treatment in particular are some of the few feasible approaches to decompose recalcitrant compounds in water.
Einige Oberflächenstrukturen, die sogenannten aktiven Zentren, sind Katalysatoren für heterogene Reaktionen. Ihre Beständigkeit ist von Art und Zusammensetzung der Phasengrenze abhängig. Eine Wechselwirkung mit reaktiven Molekülen ändert die Oberfläche durch Auflösung, Adsorption oder Oberflächendiffusion. In dieser Arbeit werden die Änderungen der Oberflächenaktivität und –struktur von Gold und Platin nach der Behandlung mit den Hydroxyl-Radikalen aufgezeigt.
Die elektrochemische Aktivität von Platin gegenüber Hydrochinon, K3Fe(CN)6 und [Ru(NH3)6]Cl2 wurde durch die Behandlung mit Hydroxyl-Radikalen nicht beeinflusst. Die Oberfläche wurde allerdings, durch die Bildung einer Oxidschicht, rauer. Die Oxidschichtbildung konnte zyklovoltammetrisch und potentiometrisch nachgewiesen werden. Im Verlauf der Wechselwirkung von H2O2 mit Platin ging Platin in Lösung (ICP-AES).
Bei Gold wurden im letzten Jahrzehnt Oberflächenstrukturen mit vielfach erhöhter Aktivität nachgewiesen. Die Experimente zeigten, dass Hydroxyl-Radikale die reaktiven Goldstrukturen (aktiven Zentren) selektiv beeinflussen. Die elektrokatalytische Sauerstoffreduktionsreaktion und die defektorientierte Platinabscheidung wurden durch die vorherige Behandlung mit Hydroxyl-Radikalen inaktiver. Der Keimbildungsmechanismus blieb hingegen unverändert (instantaneous). Dies wurde mit Hilfe der Zyklovoltammetrie und der Chronoamperometrie nachgewiesen. Topographische Experimente mit dem Rasterkraftmikroskop (AFM) zeigten ein Platinwachstum auf den oberen Teilen der polykristallinen polierten Goldelektrode. Verschiedene Politurmethoden (fein und grob) wiesen zudem eine komplett unterschiedliche Aktivität und Reproduzierbarkeit auf. Mit einer groben Politur konnte eine deutlich bessere Reproduzierbarkeit erreicht werden.
Die Identifizierung chemisch aktiver Zentren ist sehr reizvoll. Mit Hilfe von AFM Experimenten konnte die Auflösung von Gold direkt verfolgt werden und damit die aktiven Zentren charakterisiert werden. Morphologische Untersuchungen mit dem Rasterkraftmikroskop belegen eine selektive Änderung der Kristallite und Korngrenzen nach der Wechselwirkung einer ausgeheilten Goldoberfläche mit Hydroxyl-Radikalen (in- und ex-situ). Es kann angenommen werden, dass die selektive Oberflächenänderung bei Gold durch die inhomogene Verteilung der Elektronendichte und verschiedene Bindungszustände der Oberflächengoldatome beeinflusst ist. Herausstehende Kristallstrukturen sind nach der Wechselwirkung mit den Hydroxyl-Radikalen kleiner und die Korngrenzen zwischen den Goldkristallen tiefer. Die nach der einmaligen elektrochemischen Zyklisierung auftretenden Oberflächenänderungen sind den Änderungen nach Behandlung mit Hydroxyl-Radikalen ähnlich. Ein mehrmaliges Zyklisieren führt hingegen zu ein er deutlich veränderten Oberflächenstruktur.