Refine
Document Type
- Doctoral Thesis (8)
Language
- English (8) (remove)
Has Fulltext
- yes (8) (remove)
Is part of the Bibliography
- no (8)
Keywords
- Atmosphärendruckplasma (8) (remove)
Institute
Microalgae are aquatic, unicellular, eukaryotic organisms, which perform photosynthesis. They have gained interest within the last decades not only for biofuel production due to their high amount of lipids, but also for pharmaceutical and for nutraceutical purposes. Interesting compounds are proteins, carbohydrates, or pigments, such as carotenoids. However, microalgae possess strong and rigid cell walls, which hinder a sufficient and yet, gentle extraction of those valuable compounds. Although standard extraction techniques are available, several shortcomings occur, e.g. high energy demand, use of environmentally harmful solvents or alteration of compounds due to heat or chemicals. Therefore, an alternative method is needed, which is able to address these disadvantages. Physical plasmas were thus studied to answer the question whether they are able to disintegrate the cell walls of microalgae effectively and yet, without degradation of the extractives.
First step of the thesis was to find a suitable plasma source that has an effect on the cell walls because plasma effects, such as electric fields, shockwaves, UV light emission, and the generation of reactive species can be tailored with the respective setup. It was found that spark discharges are most effective for the extraction of Chlorella vulgaris, which was chosen as model organism. All extraction yields were compared to reference methods, whereat microwave radiation was found to be the most effective reference method and were hence, applied for comparative studies.
For the next step, proteins were selected as targets to answer the question, which differences can be determined between plasms-treated and microwave-radiated proteins are observable although the extraction yields were equal. Furthermore, plasma effects, especially the effects of reactive species on the extracted proteins had to be studied. Findings indicate that heat sensitive proteins, such as photosystem-related proteins, or histones are better extractable with spark discharges than with microwave exposure and the effect of reactive species is only minor.
The last step was to determine, which plasma effect is responsible for the observed cell wall disintegration. Therefore, the tensile strength of Chlorella vulgaris was determined and compared to the shockwave pressure, which is generated from the spark channel. It was proven that the shockwave pressure exceeds by far the tensile strength of the microalgae an can be thus held responsible for mechanism for cell wall rupture.
In this thesis, it was found that spark discharges are a promising alternative for the extraction of valuable compounds from microalgae. The discharges are not only effective, but also gentle enough for sensitive compounds, such as proteins or pigments.
In this work the mechanisms leading to the generation of the various reactive oxygen and nitrogen species (RONS) in a cold atmospheric plasma (CAP) jet and means to control their composition were studied. The investigated CAP jet kinpen is typically operated with Ar feed gas (pure or with molecular admixtures), driven at a frequency of approximately 1 MHz and features fast ionization waves or guided streamers, traveling at velocities of several km/s. The complex reaction networks were investigated by numerical and experimental techniques. Detailed experimental, analytical and computational investigations on the mass and heat transport in the plasma plume were performed: A novel analytical approach to diffusion in jet flows, the non-dispersive path mapping approximation (NDPM) was developed. The method for the first time allows for an estimation of the ambient species density in the near-field of jets that feature a non-homogeneous flow-field. The NDPM approximation was employed for the evaluation of laser induced fluorescence measurements on OH. Through combining measurements and NDPM approximation, this approach yielded an estimation for the ambient species density at the position of the guided streamers, not only in the laminar, but also in the (standard) turbulent operating regime. Accurate measurements of the temporally averaged ambient species density and temperature in the plasma plume were obtained by quantitative Schlieren measurements. The method yields temperature values with sub-Kelvin accuracy and, through combination with computational fluid dynamics (CFD) simulations, allowed for an estimation of the calorimetric power of the jet. In order to obtain a defined environment for the jet to operate in, a shielding gas device was designed in this work, which creates a gas curtain of defined composition around the plasma plume. The plasma dynamics on the ns timescale was investigated by phase resolved optical measurements. The effect of different shielding compositions ranging from pure N2 to pure O2 on guided streamer propagation was investigated. An electrostatic focusing mechanisms was discovered, which promotes the propagation of guided streamers along the channels formed by a noble gas in the plume of plasma jets operating in electronegative gases (such as air or O2). Two zero-dimensional (volume averaged) models were developed: First, the local processes in the guided streamer were modeled using an electron impact reaction kinetic model, which is closely correlated to densities of metastable argon (Ar*) obtained by laser atom absorption measurements. This first model shows that Ar* is the species which dominantly drives the plasma chemistry in the plasma plume. This is exploited in the second plug-flow reaction kinetics model, which is employed to investigate the formation of long-living RONS and uses an Ar* source term as sole energy input. The model uses the previous experimental data on mass and heat transport and temporal dynamics as input and is in turn verified by quantitative FTIR absorption measurements on O3, NO2, N2O, HNO3 and N2O5 in the far-field of the jet, where large absorption lengths can be achieved using a multi pass cell. For the evaluation of the zero-dimensional model, the time-of-flight of RONS from their generation to reaching the multi pass cell was determined using CFD simulations. The insight gained through this combined experimental-modeling approach on the reaction networks revealed relevant control parameters and enabled adjusting the plasma chemistry towards a desired RONS output. Through choosing appropriate feed-gas admixtures and shielding gas compositions, it is possible to generate an NOx-dominated plasma chemistry, although the jet usually produces a strongly O/O3-dominated chemistry. Understanding and controlling the plasma chemistry of cold atmospheric plasma sources for medical applications is not only essential for research, but is also the key for designing future plasma sources for specific medical applications that yield an optimum efficacy and avoid potential side effects of plasma treatment.
Because of the vital role of the liquid as interface in plasma medicine, this work is focused on the elucidation of the interaction of plasmas with biologically relevant liquids. The results of this thesis are an important step in the direction of the applications to real biological liquids such as blood and wound secretion ex vivo as well as in vivo. In this thesis the following questions are investigated and answered with the special focus on the free radicals as highly reactive and, therefore, hard to detect relevant group of chemical species: What is the impact of the atmospheric-pressure argon plasma jet on biologically relevant solutions? Which species are generated due to the plasma treatment of liquids? What is an appropriate detection procedure for the qualification and quantification of the short-lived species? Does the surrounding conditions influence the formation of liquid-phase reactive species and can this influence be used to tailor a desired liquid composition? What is the influence of the plasma surroundings? What is the influence of feed gas manipulation regarding the reactive species generation? Can these impacts be used for a selected reactive species composition generation? Does the treated liquid medium affect the plasma-generated reactive species output and in what way? Which are the underlying mechanisms and origins of the plasma-caused chemical changes in the solutions? Do reactive species exist, which origin is located in the gaseous phase? What is the impact of the plasma jet radiation?
In the last decade a new domain has developed in plasma physics: plasma medicine. Despite the successes that have already been achieved in this exciting new field, the interaction of plasmas with “biological materials” is not yet fully understood. Further investigations in particular with respect to the properties of the applied plasmas sources are therefore essential in order to decode this complex interaction process. Currently, a great variety of different discharge types are used in plasma medical investigation which are generally are operated in noble gases like helium and argon or with dry air. In the present work, the main focuses is on the diagnostics of reactive oxygen and nitrogen species (RONS) resulting from the plasma chemistry of an argon radio-frequency (RF) atmospheric pressure plasma jet (APPJ) and its interaction with the ambient atmosphere. To conduct this study, a commercially available plasma device, so-called kinpen is used due to its technical development maturity and its accessibility on the market. As a method of choice, diagnostic techniques are based on optical spectroscopy known to be a reliable tool to investigate plasmas. Consequently, three complementary optical laser diagnostics, namely quantum cascade laser absorption spectroscopy (QCLAS), laser induced fluorescence (LIF) and planar single shot LIF (PLIF), have been successfully applied to the plasma jet itself or its effluent. All of these diagnostics offer a high species selectivity and an excellent spatial and temporal resolution. They are used in this work for i) the characterization of the plasma chemical dynamics with respect to the generation of biological active RONS – in particular for the case of N2 and O2 admixtures. ii) the measurement of the NO density profile in the plasma effluent iii) the investigation of the flow characteristics of the neutral gas component (laminar vs. turbulent) and its influence on the plasma chemistry. Numerical analysis have been carried out in collaboration with PLASMANT (University of Antwerp) via kinetic simulations of the entire plasma chemistry. Expectingly, atomic oxygen (O) and nitric oxide (NO) turn out to be precursors of ozone (O3) and nitric dioxide (NO2). However, it was intriguing to unveil that atomic oxygen and nitrogen metastable (N2(A)) play together a key part --as intermediate species-- in the generation of more stable RONS, e.g. NO. The absolute density of NO space resolved was measured by LIF and absolutely calibrated molecular beam mass spectrometer. LIF was used to determine relative density of OH radical in the plasma plume. 2D-LIF was used to investigate the gas flow pattern with OH as a flow tracer. The results are discussed in details and show different operating mode of the jet, e.g. laminar or turbulent and that the plasma influences these regimes. The first detection and relative measurement by LIF of nitrogen metastable (N2(A)) produced by an argon APPJ is also shortly reported in this work. The outcome of this thesis will bring new insights in the field of argon APPJs chemistry and its interaction with the ambient atmosphere which can be valuable to support plasma modelling and to consider for the applications in plasma medicine.
In the framework of the current work has been the plasma initiated and surface catalysed species conversion studied in low pressure and atmospheric plasmas. The aim of the work is to improve the understanding of the internal processes in order to increase the energy efficiency as well as the selectivity of the reaction products of future plasma devices. Beside many technical applications of plasmas, air purification shows great potential. Over the last decades, plasma based pollution control has proofed its ability to remove harmful contaminants or annoying odours from an air stream. However, the energy efficiency and the selectivity of the products are a remaining challenge.
Motivated by these issues, a multi stage packed-bed reactor has been used to remove admixed ethylene and toluene from an air stream. It has been found that the maximum toluene destruction has been 60%, whereas ethylene has been nearly completely removed. The specific energy β has been between 120 and 1600 JL-1. Fourier Transform Infrared spectroscopy, FTIR spectroscopy, has been used to identify and quantify the species H2O, CO2, CO, O3, HNO3, HCN, CH2O, CH2O2, N2O and NO2. However, none of these experiments led to the detection of NO.
The embedment of packing material into a plasma volume leads to increased surface effects. In order to study them, the inner side of a tube reactor, made of Pyrex, served as the surface under study and has been exposed to a rf plasma for 1h. The surface effects of the plasma treatment have been investigated indirectly by studying the oxidation of NO into NO2. After the plasma exposure, the reactor has been evacuated and filled with a gas mixture of 1% NO in N2 / Ar. Both species have been measured using quantum cascade laser absorption spectroscopy, QCLAS. It has been found that, using oxygen containing plasmas, the NO concentration decreased whereas the NO2 concentration increased. Therefore, oxygen containing plasmas are able to deposit oxygen on the surface. The filling with NO leads to the oxidation via the Eley-Rideal mechanism. A simplified model calculation supports these assumptions.
For a more comfortable application of the QCLAS, a compact multi channel spectrometer has been developed, TRIPLE Q. It combines the high time resolution with the possibility to measure the concentration of at least three infrared active species simultaneously. Due to the high time resolution, a huge number of spectra have to be analysed. In order to calculate absolute number densities, an algorithm has been developed which automatically treats typical phenomena like pulse jitter, rapid passage effect or variations of the intensity of the laser pulses.
The gas temperature is an important parameter in plasma physics. Using the TRIPLE Q system, the gas temperature has been determined for pulsed dc plasmas. For this case, NO has been used as a probe gas. From the spectra, the temperature has been calculated using the line ratio method. The relative intensity of the absorption structures of NO at 1900.5cm-1 and 1900.08cm-1 depend on the temperature. Therefore, the ratio has been used to calculate the gas temperature with a time resolution in the μs range.
Vibrationally excited nitrogen can be an energy reservoir that plays an important role in plasma chemistry. In N2 / N2O plasmas, vibrationally excited N2 can undergo relaxation via a resonant vibration vibration coupling between vibrationally excited N2 and N2O. Due to such an efficient energy transfer, the method allows one to study the relaxation of vibrationally excited N2. Using this method, molecules, which are not infrared active, can be monitored. This approach has extended the field of scientific and commercial applications of the QCLAS.
The biological decontamination and sterilization is a crucial processing step in producing and reprocessing of medical devices. Since polymer-based materials are increasingly used for the production of medical devices, the application of conventional sterilization processes are restricted to a certain extent. Conventional sterilization techniques on the basis of high temperatures, toxic gases, or ionizing radiation can be detrimental to the functionality and performance of polymeric materials. For this reason, alternative, gentle, and efficient decontamination processes are required. One possible approach is the use of non-thermal physical plasmas. Especially atmospheric pressure plasma is receiving great interest due to the absence of vacuum systems which is highly attractive for the practical applicability. Its mechanisms of action enable the efficient killing and inactivation of micro-organisms which are attributed to the interaction of plasma-generated reactive oxygen and nitrogen species (ROS, RNS) as well as plasma-emitted (V)UV radiation. Owing to the moderate gas temperatures (near or at room temperature) so-called cold plasmas are well-suitable for the treatment of heat-sensitive materials, such as polymers, without affecting their bulk properties. The present work focuses on the investigation of atmospheric pressure plasma processes for the biological decontamination of polymers. The objective is to help elucidate on the one hand the impact of varied plasma process parameters on the inactivation of micro-organisms and on the other hand the influence of plasma on the surface properties of the substrate. The investigations were performed by means of a high-frequency driven plasma jet (from the product line kINPen) operated with argon and argon-oxygen mixtures. Three main aspects were analyzed: 1. The effect of plasma on the viability of micro-organisms dependent on working gas, treatment time, and the sample distance (distance between the jet nozzle and the substrate). 2. The plasma-based removal of microbial biofilms. 3. The effects of the plasma treatment on the surface properties of selected polymers. Additionally to the capability of the applied plasma jet in killing microbes the efficacy of this plasma jet for the removal of complex biological systems (e.g. biofilms) is shown. To model cell constituents of bacteria different synthetic polymers were chosen to gain insight into the decomposition process responsible for biofilm degradation. By investigating the impact of atmospheric pressure plasma on physico-chemical surface properties of various synthetic aliphatic and aromatic polymers the interaction mechanisms between plasma and plasma-exposed material are discussed. These studies are accompanied by applying different optical plasma diagnostic techniques (optical emission spectroscopy and two-photon absorption laser induced fluorescence spectroscopy) to obtain information on the plasma gas phase which contributes to the elucidation of the reaction mechanisms occurring during plasma exposure. Moreover, it is presented to which extent the plasma treatment influences the surface properties of polymers during the plasma-based bio-decontamination process and further, the benefits of surface-functionalized polymers for biomedical application is discussed.
On the aqueous phase chemistry of atmospheric-pressure plasma jets for biomedical applications
(2021)
Cold atmospheric-pressure plasmas are candidate biomedical tools proposed for various applications, such as biological decontamination, cancer regression, and promotion of wound healing. Plasmas, which are in the fourth state of matter, can be generated using inert gases (e.g., argon, helium, ambient air) and different source concepts. Together with the applied parameters, the source design defines the chemical-physical characteristics of the resulting plasma, leading in turn to variable biochemical effects on biological matter. The medical effectiveness of cold plasmas has been proven in vitro and in vivo, also in clinical trials for wound healing in patients using two certified plasmas sources, the kINPen MED and the PlasmaDerm. However, molecular mechanisms leading to those effects are unclear. In the same way, it must be studied if the modulation of plasma properties could improve the specificity of biological effects. These findings are needed to define the concept of plasma dose to be optimized in targeting peculiar pathologic conditions. The present thesis consisting of five peer-reviewed publications has investigated these aspects of plasma research.
In the gaseous phase of cold plasmas, various components with biological activity are produced, such as radiation (e.g., vacuum UV, UV) and reactive species (e.g., •O, 1O2, •OH, •NO, •NO2, O3). As most gaseous species are short-lived, liquid compartments surrounding cells and molecular structures could mediate their transformation and/or the production of other aqueous species. For this reason, plasma-induced aqueous chemistry has been mainly investigated in this thesis. The reaction pathways of reactive oxygen and nitrogen species in liquid were analyzed by monitoring the oxidative modifications induced on tyrosine and cysteine, which are biological structures essential in cellular protein functioning. Liquid chromatography and mass spectrometry-based strategies have been elaborated to elucidate structural changes and characterize the oxidative pattern occurring on the tracers after treatment with plasmas.
As a first result, it could be shown that the oxidative pattern induced on tyrosine or cysteine variated qualitatively and quantitatively with the applied conditions, reflecting the action of differently produced/deposited species in liquid. Biologically relevant structures were identified and in part quantified (e.g., cystine, sulfonic acid, sulfinic acid, S-sulfonate, S-nitrosocysteine, nitrotyrosine, nitrosotyrosine). By using isotopically labeled oxygen or nitrogen in the gas plasma, or labeled oxygen in the target liquid, the incorporation of gaseous or aqueous species in the tracer’s structures was monitored via mass spectrometry. With this strategy, the reaction mechanisms involving gaseous oxygen and nitrogen species at the liquid interface were clarified, as well as the de novo production of reactive species in liquid. Short-lived gaseous oxygen species such as atomic and singlet oxygen (•O, 1O2), predominantly formed in conditions with oxygen in the plasma gas, were able to modify the cysteine structures in highly oxidized derivatives, such as cysteine sulfonic acid. Due to their half-life, however, their activity occurred mainly at the interface. Vacuum UV radiation and •O also led to the formation in liquid of hydroxyl radicals (•OH) and hydrogen peroxide (H2O2), due to water photolysis and homolysis. Water-derived species were responsible for the formation of reversible modifications, such as cysteine S-sulfonate, cystine, and cystine sulfoxides. Nitrosative modifications (e.g., S-nitrosocysteine, nitrosotyrosine, nitrotyrosine) could be observed only in conditions with both nitrogen and oxygen in the plasma gas, and further optimization occurred in presence of water molecules in the gas. In this case, the formation and action of peroxynitrite (ONOO-) in generating nitrotyrosine was proven by using a scavenger molecule for ONOO-.
Finally, the cysteine product pattern was applied as a tool to characterize and compare the overall chemistry generated in liquid by different plasma sources and applied parameters. These findings aim to support and contribute to the definition of plasma dose for plasma medicine, through the standardization, control, tuning, and optimization of plasma parameters and plasma liquid chemistry. These results may be applied in the future to improve the specificity and selectivity of the biological effects generated by the described atmospheric-pressure plasma jets.
Pharmaceutical residues are found in increasing concentrations in the environment and in potable water where they have verifiable effects on aquatic life. Conventional methods for water treatment are not able to sufficiently abate these generally stable compounds. It was found that physical plasma generated directly in water can degrade several of these recalcitrant organic pollutants. Studies on the basic plasma chemical processes for the model system of phenol showed that the degradation is primarily caused by hydroxyl radicals. This was confirmed by reaction chemistry and spin trap enhanced electron paramagnetic resonance spectroscopy (EPR). The degradation of diclofenac and its by-products were investigated in detail to perform a first risk-assessment of the new technology. Findings are not limited to the application of plasma but applicable to other advanced oxidation processes (AOP) that are based on the generation of hydroxyl radicals as well. Additionally, pulsed corona plasma and pulsed electric fields were assessed for their capacity to kill Legionella pneumophila in water. Whereas it was possible to kill L. Pneumophila with both methods, plasma treatment resulted in an enhanced bacterial killing. Therefore, advanced oxidation processes (AOP) and plasma treatment in particular are some of the few feasible approaches to decompose recalcitrant compounds in water.