Refine
Document Type
- Doctoral Thesis (4)
Language
- English (4) (remove)
Has Fulltext
- yes (4)
Is part of the Bibliography
- no (4)
Keywords
- Massenspektrometrie (4) (remove)
Institute
- Institut für Physik (4) (remove)
This work describes the recent scientific and technical achievements obtained at the high-precision Penning trap mass spectrometer SHIPTRAP. The scientific focus of the SHIPTRAP experiment are mass measurements of short-lived nuclides with proton number larger than 100. The masses of these isotopes are usually determined via extrapolations, systematic trends, predictions based on theoretical models or alpha-decay spectroscopy. In several experiments the masses of the isotopes 252-255No and 255,256Lr have been measured directly. With the obtained results the region of enhanced nuclear stability at the deformed shell closure at the neutron number 152 was investigated. Furthermore, the masses have been used to benchmark theoretical mass models. The measured masses were compared selected mass models which revealed differences between few keV/c² up to several MeV/c² depending on the investigated nuclide and model. In order to perform mass measurements on superheavy nuclei with lower production rates, the efficiency of the SHIPTRAP setup needs to be increased. Currently, the efficiency is 2% and mainly limited by the stopping- and extraction efficiency of the buffer gas cell. The stopping and extraction efficiency of the current buffer gas cell is 12%. To this end, a modified version of the buffer gas cell was developed and characterized with 223Ra ion source. Besides a larger stopping volume and a coaxial injection the new buffer gas cell is operated at a temperature of 40K. The operation at cryogenic temperatures increases the cleanliness of the buffer gas. From extraction measurements and simulations an overall efficiency of 62(3)% was determined which results in an increase by a factor of 5 in comparison to the current buffer gas cell. Aside from high-precision mass measurements of heavy radionuclides the mass differences of metastable isobars was measured to identify candidates for the neutrinoless double-electron capture. Neutrinoless double-electron capture can only occur if the neutrino is its own antiparticle and a physics beyond the standard model exists since the neutrinoless double-electron capture violates the conservation of the lepton number. Due to its expected long half-life this decay has not yet been observed. However, the decay rate is resonantly enhanced if mother and daughter nuclide are degenerate in energy. Suitable candidates for the search of the neutrinoless double-electron capture have been identified with mass difference measurements uncertainties of about 100eV/c². In this work the results of the mass difference measurements of 12 possible candidates are presented.
This thesis describes the implementation and first on-line application of a multi-reflection time-of-flight (MR-ToF) mass analyzer for high-resolution mass separation at the ISOLTRAP mass spectrometer at ISOLDE/CERN. On the one hand, the major objective was to improve ISOLTRAPs mass-measurement capabilities with respect to the ratio of delivered contaminating ions to ions of interest. On the other hand, the time necessary to purify wanted from unwanted species should be reduced as much as possible to enable access to even more exotic nuclei. The device has been set up, optimized and tested at the University of Greifswald before its move to ISOLTRAP. The achieved performance comprises mass resolving powers of up to 200000 reached at observation times of 30ms and a contamination suppression of about four orders of magnitude by use of a Bradbury-Nielsen gate. With the characteristics, it outperforms clearly the so far state-of-the-art purification method of a gas-filled Penning trap. To improve the utilization of the MR-ToF mass analyzer, the in-trap lift method has been developed. It simplifies the application and optimization of the device, which is a crucial time factor in an on-line experiment. The device was the first of its kind successfully applied to radioactive ion beams for a mass analysis, for a mass separation (in combination with the Bradbury-Nielsen gate) as a preparatory step for a subsequent Penning-trap mass measurement and as a high-precision mass spectrometer of its own. The later was recently used for the first mass measurement of the neutron-rich calcium isotopes 53Ca and 54Ca. The so-far achieved mass-resolving power of 200000 belongs to the highest reported for time-of-flight mass analyzers at all. The first successful application of the MR-ToF system as the only mass separator at ISOLTRAP resulted in the mass measurement of 82Zn. The new mass value has been compared to mass extrapolations of the most recent Hartree-Fock-Bogoliubov (HFB) mass models, HFB-19 to HFB-21, of the BRUSLIB collaboration. The mass of the nuclide is of high interest for the compositions and depth profile of the outer crust of neutron stars. In the classical model of the outer crust of a cold, non-accrediting and non-rotating neutron star, the sequence of nuclides found within this parts is determined mainly by the binding energy of exotic nuclides. The crustal compositions determined with the three HFB mass models differed with respect to the appearance of a layer of 82Zn, originating from different mass extrapolations of this mass. With the new experimental data, the extrapolations could be evaluated. It was found that the HFB-21 mass value differs less from the experimental data than the ones from HFB-19 and 20. Therefore, in the classical model, 82Zn does not appear anymore in the outer crust. Due to its high resolution and very fast measurement time, the MR-ToF mass analyzer will be an important instruments for future activities at ISOLTRAP, at the ISOLDE facility in general, and at other radioactive ion-beam facilities.
Abstract Atmospheric Pressure Discharges have attracted much interest in recent years. The development of a new processes based on this discharge needs a clear understanding of plasma and discharge physics and chemistry. At the present time much attention is paid to the chemical processes in barrier discharge plasma in various gas mixtures, since the understanding of these processes is necessary for the development of industrial reactors. Besides these, hydrocarbons are being used for the formation of diamond like or amorphous carbon (DLC) films. Specially, hydrogenated amorphous carbon (a-C: H) and plasma polymerization. In this work we have used Dielectric Barrier Discharge (DBD) a plasma device used to investigate simple hydrocarbon reactions in a plasma phase. Our aim of plasma phase chemical reaction studies is to form molecular hydrogen, higher order hydrocarbons CnHm up to n ≥ 12 series and nitrogen - containing organic complexes using simple hydrocarbons. Deposition of thin organic films or DLC films were carried out using the DBD. In this study we have chosen certain combination of gases such as C2Hm/N2 (m = 2, 4, 6) and C2Hm/Ar (m = 2, 4, 6); the purpose of using N2 and Ar gases are to dilute and stabilize the hydrocarbon plasma and to investigate plasma chemical reactions with nitrogen gas. All reactions were carried out under an atmospheric pressure (300 mbar) with gas ratio 1:2; Experiments were performed by applying high voltage with a frequency 5.5 kHz. The plasma phase diagnostics have been investigated using mass spectrometry and FTIR spectroscopy. Formation of molecular hydrogen, N-containing organic complexes and higher order hydrocarbons with C ≥ 12, have been investigated with mass spectrometry. FTIR spectroscopy reveals the formation of substituted alkanes (sp3), alkenes (sp2) and alkynes (sp) and nitrogen containing functional groups from the individual gases which are used in this work. Abundant formation of acetylene occurs with C2H6 and C2H4 as precursor gases. Amorphous hydrogenated carbon nitride (a-CNx:H) films have been deposited on Si (100) and glass substrates using gas mixtures C2Hm/N2 (m = 2, 4, 6). Surface chemical compositions have been derived from Fourier Transform Infrared Reflection Absorption Spectroscopy (FT-IRRAS) and X-ray Photo electron Spectroscopy (XPS). FT-IRRAS and XPS show the presence of sp, sp2 and sp3 bonds of carbon and nitrogen for C2Hm/N2 thin films. Various functional groups such as amines, saturated and unsaturated alkyl groups have been identified. Thin films obtained from C2H2/N2 and C2H4/N2 gas mixture had a larger N/C ratio when compared to the film obtained from C2H6/N2. Thickness, refractive index and extinction co-efficient were investigated by ellipsometry. Rate of deposition have been investigated. Different surface morphology has been derived using Scanning Electron Microscopy. Amorphous hydrogenated carbon (a-C:H) films or diamond like carbon (DLC) films have been deposited on Si (100) and glass substrates using gas mixtures C2Hm/Ar (m = 2, 4, 6). Diagnostics for the deposited films have been done using different spectroscopic techniques. Surface chemical compositions have been derived from Fourier Transform Infrared Reflection Absorption Spectroscopy (FT-IRRAS) and X-ray Photo electron Spectroscopy (XPS). FT-IRRAS show the presence of sp, sp2 and sp3 bonds of carbon and hydrogen for C2Hm/Ar (m = 2, 4, 6) thin films. The characteristic peak for C1s has been observed from XPS. Thickness, refractive index and extinction co-efficient were investigated by ellipsometry. Rate of deposition have been investigated.
In the present work, mass determinations of the eleven neutron-deficient nuclides (99-109)Cd, of ten neutron-rich silver nuclides (112-114,121,123)Ag, and seven neutron-rich cadmium nuclides (114,120,122-124,126,128)Cd are reported. Due to the clean production of the neutron-deficient nuclides it was possible to reduce the experimental uncertainties down to 2 keV, whereas the measurements of neutron-rich nuclides were hampered by the presence of contaminations from more stable In and Cs nuclides. In the case of 99Cd and 123Ag the masses were determined for the first time and for the other nuclides the mass uncertainties could be reduced by up to a factor of 50 as in the case of 100Cd. In the case of a potential isomeric mixture as for (115,117,119)Ag and 123Cd, where no assignment to either the ground state or the excited state was possible, the experimental results were adjusted accordingly. Afterwards all results were included in the framework of the atomic-mass evaluation and thus linked and compared with other experimental data. In the case of the neutron-deficient Cd nuclides a conflict between the mass values obtained in the present work and those published by the JYFLTRAP group could be solved by performing an atomic-mass evaluation. These mass measurements are an important step towards an understanding of the physics of the rp process that will enable a more reliable determination of the composition of the produced material at A = 99. It has been shown that the mass of 99Cd strongly affects the A = 99 production in an X-ray burst model, and that uncertainties have been significantly reduced from more than an order of magnitude to about a factor of 3. The dominant source of uncertainty is now the mass of 100In. In principle, other uncertainties will also contribute. These include those of masses of lighter Cd isotopes, where similar rp-process branchpoints occur and which might affect feeding into the 99Cd branchpoint. In addition, nuclear reaction rate uncertainties will also play a role. However, as reaction rates affect branchings in a linear fashion, while mass differences enter exponentially, mass uncertainties will tend to dominate. Also, which reaction rates are important depends largely on nuclear masses. For example, for low Sp(100In) a (p,γ)-(γ,p) equilibrium will be established between 99Cd and 100In and the 100In(p,γ) reaction rate would affect the A = 99 production, while for larger Sp(100In) the 99Cd(p,γ) reaction rate might be more relevant. Therefore, the mass uncertainties should be addressed first. The presented results are relevant for any rp-process scenario with a reaction flow through the 99Cd region. Here, an X-ray burst model has been used to investigate in detail the impact of the present measurements on such an rp process. The νp process in core collapse supernovae might be another possible scenario for an rp process in the 99Cd region. It it is planed to also explore whether in that case mass uncertainties have a similar impact on the final composition. On the neutron-rich side of the valley of stability for the Cd and Ag chains of nuclides, the r process has not yet been reached. Further technical development on suppression of contaminants are required. This includes improvements on the ISOLDE side, e.g., by improving the selectivity of the transfer line or on the ISOLTRAP setup by implementing an electrostatic ion beam trap for a fast and efficient isobaric selection. Nevertheless the obtained results contribute to the knowledge of nuclear structure. The trends in the two-neutron separation-energy S2n and the interaction between the last neutrons and last protons ΔVpn were corrected to more smooth evolutions, as already seen in other regions of the nuclear chart. The strongest corrections have been observed for even-N nuclides, were more new experimental data are available. Thus, new measurements on odd-N nuclides are suggested. This also is underlined by the trends observed in the Garvey-Kelson relations for the neutron-rich Cd nuclides. Furthermore, it has been shown, that the prominent structure of the ΔVpn for an entire chain of nuclides including inflexion points can be reproduced by using simple relations between quantum numbers of the occupied orbits. This approach connects ten values for each nuclide with only one adjusted parameter. This has been investigated for 63 ΔVpn values of even-even nuclides in the vicinity of Z = 50 and 50 ≤ N ≤ 82. The simple model works remarkably well for the elements Cd, Sn, and Te. Small deviation have been observed for the Xe and Pd nuclides which were explained with the limitations of the model to the vicinity of the close shells, where the nuclides have only few valence protons and neutrons.