Refine
Year of publication
- 2014 (4) (remove)
Document Type
- Doctoral Thesis (4)
Has Fulltext
- yes (4)
Is part of the Bibliography
- no (4)
Keywords
- Plasmaphysik (4) (remove)
Institute
Die vorliegende Arbeit liefert Beiträge zur optischen und elektrischen Charakterisierung des dynamischen Verhaltens von Plasmaspezies in Atmosphärendruck-Plasmen insbesondere mit Hinsicht auf den Einsatz in der Plasmamedizin. Dabei wurde ein breites Spektrum verschiedener Diagnostiken angewandt, um die Zugänglichkeit zur Bestimmung weiterer Plasmaparameter an Atmosphärendruck zu prüfen. Diese Arbeit stellt eine neue Methode zur Bestimmung der Ionendichte bei Atmosphärendruck- Bedingungen vor, bei der elektrische Oszillationen ausgewertet werden, deren Ursprung ionenakustische Wellen im Plasma sind. Weiterhin wurden neben relativen optischen Messungen wie der phasenaufgelösten optischen Fotografie (PROI) und der Kreuz- Korrelations-Spektroskopie (CCS) auch absolute optische Messungen mit der interferometrischen Hakenmethode und dem Pockels-Effekt durchgeführt. Anhand von elektrischen Messungen wurde ferner gezeigt, dass mit einer Strom- und Spannungs-Charakteristik der Einfluss von Aufbauparametern, wie der Kapillarposition oder dem Gasfluss, auf das Plasma untersucht werden kann. Gegenstand der Untersuchungen waren verschiedene Plasmaquellen, die für eine Nutzung in der Plasmamedizin entwickelt wurden. Sowohl die elektrischen Messungen des Parametereinflusses als auch die Bestimmung der Ionendichte erfolgten an der selbstpulsenden transienten Funkenentladung in Argon an offener Atmosphäre. Der geringe Filamentdurchmesser und der dennoch hohe Entladungsstrom ermöglichen die Detektion der ionenakustischen Instabilität. Darüber hinaus wurde diese erratisch zündende Entladung räumlich und zeitlich aufgelöst mit der CCS spektroskopisch untersucht. Dabei wird insbesondere die Selbst-Triggerung der CCS ausgenutzt, um einen Zeitbezug trotz des großen Entladungsjitter zu erhalten. Für die PROI wurden die räumlich und zeitlich stabilen Entladungsanordnungen der Nadel-Platte-Geometrie und des Kapillarjets in Helium gewählt. Die Anordnungen wurden mit einer periodischen Sinusspannung betrieben und wiesen Entladungsspalte von d = 5 - 15 mm auf. Eine besondere Anforderung der Messung mit dem Pockels-Effekt ist zu der räumlichen und zeitlichen Stabilität eine dielektrische Gegenelektrode, welche bei der Anordnung des Kapillarjets möglich war. Bei der Anwendung der interferometrischen Hakenmethode kam neben einem Erdgas-Sauerstoff-Mischgasbrenner sowohl eine Mikrowellen-Entladung (Plexc) als auch ein MHz-Plasmajet (kINPen) zur Anwendung. Die Bedeutung der elektrischen Messungen, besonders der Strom- und Spannungscharakteristik einer Entladung, wurde an dem Parametereinfluss der Kapillarposition einer erratisch zündenden transienten Funkenentladung vorgestellt. Es konnte gezeigt werden, dass der Zeitunterschied zwischen dem Stromsignal eines Vorstreamers und der Hauptentladung durch das Einbringen einer Kapillare in den Entladungsspalt deutlich verringert wird. Insbesondere der Beitrag der lokalen elektrischen Feldstärkeerhöhung an der Kapillarkante und der Diffusionsanteil der Umgebungsluft wurden als Ursachen, durch Vergleich einer Feldsimulation mit der Beobachtung der Vorphase an der Kapillarkante in den CCS-Messungen, diskutiert. Anschließend konnte gezeigt werden, dass der Leistungseintrag in die Vorphase durch die Platzierung der Kapillare deutlich reduziert werden kann. Ein wesentliches Ergebnis dieser Arbeit ist die Beobachtung von ionenakustischen Wellen als Oszillationen im Abklingen des Stromsignals einer erratisch zündenden transienten Funkenentladung. Hierzu war es nötig, elektrische Störungen zu erkennen und zu eliminieren. Es konnte ein Erdschleifen-freier Aufbau realisiert werden. In diesem Aufbau zeigt sich, dass die Signale der ionenakustischen Welle ausschließlich in einem bestimmten Gasflussbereich beobachtet werden. Die gemessene Frequenz der Oszillationen wurde als Ionenplasmafrequenz f_{pl ,i} identifiziert und enthält daher Angaben zu den Ionendichten im Bereich von n_{Ar_2^+} = 3•10^{14} cm^{-3} bis 1•10^{12} cm^{-3}. Nach einer Abschätzung der zu erwartenden Elektronendichte, die der gemessenen Ionendichte sehr nahe kommt, wurde die Dispersionsrelation für die vorhandenen Entladungsbedingungen aufgestellt und gelöst. Dabei zeigt sich eine starke zeitliche Dämpfung über die Ionen-Neutralteilchenstöße sowie eine räumliche Verstärkung für die Ionenplasmafrequenz. Aus der Dämpfung der Oszillationsamplituden konnte die Ionen- Neutralteilchen-Stoßfrequenz nu_i = 3•10^7 Hz ermittelt werden. Weiterhin ergibt sich aus der Lösung der Dispersionsrelation ein Existenzbereich für die ionenakustischen Wellen in Abhängigkeit von der Ionendichte und der elektrischen Feldstärke.
Magnetic reconnection is a ubiquitous phenomenon observed in a wide range of magnetized plasmas from magnetic confinement fusion devices to space plasmas in the magnetotail. The process enables the release of accumulated magnetic energy by rapid changes in magnetic topology, heating the plasma in the vicinity of the reconnection site, generating fast particles and allowing a wealth of instabilities to grow. This thesis reports on the results from a newly constructed linear, cylindrical and modular guide field reconnection experiment with highly reproducible events, VINETA.II. A detailed analysis of the reconnecting current sheet properties on a macroscopic and microscopic scale in time and space is presented. In the experiment, four parallel axial wires create a figure-eight in-plane magnetic field with an X-line along the central axis, as well as an axial inductive field that drives magnetic reconnection. Particle-in-cell simulations show that the axial current is limited by sheaths at the boundaries and that electrostatic fields along the device axis always set up in response to the induced electric field. Current sheet formation requires an additional electron current source, realized as a plasma gun, which discharges into a homogeneous background plasma created by a rf antenna. The evolution of the plasma current is found to be dominantly set by its electrical circuit. The current response to the applied electric field is mainly inductive, which in turn strongly influences the reconnection rate. The three-dimensional distribution of the current sheet is determined by the magnetic mapping of the plasma gun along the sheared magnetic field lines, as well as by radial cross-field expansion. This expansion is due to a lack of equilibrium in the in-plane force balance. Resistive diffusion of the magnetic field by E=η j is found to be by far insufficient to account for the high reconnection rate E=-dΨ/dt at the X-line, indicating the presence of large electrostatic fields which do not contribute to dissipative reconnection. High-frequency magnetic fluctuations are observed throughout the current sheet which are compared to qualitatively similar observations in the Magnetic Reconnection Experiment (MRX, Princeton). The turbulent fluctuation spectra in both experiments display a spectral kink near the lower hybrid frequency, indicating the presence of lower hybrid type instabilities. In contrast to the expected perpendicular propagation of mainly electrostatic waves, an electromagnetic wave is found in VINETA.II that propagates along the guide field and matches the whistler wave dispersion. Good correlation is observed between the local axial current density and the fluctuation amplitude across the azimuthal plane. Instabilities driven by parallel drifts can be excluded due to the large required drift velocities or low resulting phase velocities that are not observed. It is instead suggested that a perpendicular, electrostatic lower hybrid mode indeed exists that resonantly excites a parallel, electromagnetic whistler wave through linear mode conversion. The resulting fluctuations are found to be intrinsic to the localized current sheet and are independent of the slower reconnection dynamics. Their amplitude is small compared to the in-plane fields, and have a negligible contribution to anomalous resistivity through momentum transport in the present parameter regime.
The present thesis deals with dynamic structures that form during the expansion of plasma into an environment of much lower plasma density. The electron expansion, driven by their pressure, occurs on a much faster time scale than the ion expansion, owed to their mobility. The high inertia of the ions causes the generation of an ambipolar electric field that decelerates the escaping electrons while accelerating the ions. The ambipolar boundary propagates outwards and forms a plasma density front. For a small density differences, the propagation of the front can be described with the linear ansatz for ion acoustic waves. For a large density differences, experiments have shown that the propagation velocity of such a front is still related to the ion sound velocity. However, the reported proportionality factors are scattered over a wide range of values, depending on the considered initial and boundary conditions. In this thesis, the dynamics during plasma expansion are studied with the use of experiments and a versatile particle-in-cell simulation. The experimental investigations are performed in the linear helicon device Piglet. The experiment features a fast valve, which is used to shape the neutral gas density profile. During the pulsed rf-discharges, plasma is generated in the source region and expands collisionless into the expansion chamber. The computer simulation is tailored very close to the experiment and provides a deeper insight in the particle kinetics. The experimental results show the existence of a propagating ion front. Its velocity is typically supersonic and depends on the density ratio of the two plasmas. The ion front features a strong electric field. The front can have similar properties to a double layer is not necessarily a double layer by definition. The computer simulation reveals that the propagating electric field repels the downstream ambient ions. These ions form a stream with velocities up to twice as high as the front velocity. The observed ion density peak is due to the accumulation of the repelled ions and is located at their turning point. The ion front formation depends strongly on the initial ion density profile and is part of a wave-breaking phenomenon. The observed front is followed by a plateau of little plasma density variation. This could be confirmed for the expansion experiment by a comparison with virtual diagnostics in the computer simulation. The plateau has a plasma density determined by the ratio between the high and low plasma density. It consists of streaming ions that have been accelerated in the edge of the main plasma. The presented results confirm and extend findings obtained by independent numerical models and simulations.
Magnetic reconnection is a fundamental plasma process where a change in field line connectivity occurs in a current sheet at the boundary between regions of opposing magnetic fields. In this process, energy stored in the magnetic field is converted into kinetic and thermal energy, which provides a source of plasma heating and energetic particles. Magnetic reconnection plays a key role in many space and laboratory plasma phenomena, e.g. solar flares, Earth’s magnetopause dynamics and instabilities in tokamaks. A new linear device (VINETAII) has been designed for the study of the fundamental physical processes involved in magnetic reconnection. The plasma parameters are such that magnetic reconnection occurs in a collision-dominated regime. A plasma gun creates a localized current sheet, and magnetic reconnection is driven by modulating the plasma current and the magnetic field structure. The plasma current is shown to flow in response to a combination of an externally induced electric field and electrostatic fields in the plasma, and is highly affected by axial sheath boundary conditions. Further, the current is changed by an additional axial magnetic field (guide field), and the current sheet geometry was demonstrated to be set by a combination of magnetic mapping and cross-field plasma diffusion. With increasing distance from the plasma gun, magnetic mapping results in an increase of the current sheet length and a decrease of the width. The control parameter is the ratio of the guide field to the reconnection magnetic field strength. Cross-field plasma diffusion leads to a radial expansion of the current sheet at low guide fields. Plasma currents are also observed in the azimuthal plane and were found to originate from a combination of the field-aligned current component and the diamagnetic current generated by steep in-plane pressure gradients in combination with the guide field. The reconnection rate, defined via the inductive electric field, is shown to be directly linked to the time-derivative of the plasma current. The reconnection rate decreases with increasing ratio of the guide field to the reconnection magnetic field strength, which is attributed to the plasma current dependency on axial boundary conditions and the plasma gun discharge. The above outlined results offer insights into the complex interaction between magnetic fields, electric fields, and the localized current flows during reconnection.