Refine
Year of publication
Document Type
- Doctoral Thesis (131)
- Article (88)
Has Fulltext
- yes (219)
Is part of the Bibliography
- no (219)
Keywords
- - (47)
- Biopharmazie (17)
- Wirkstofffreisetzung (14)
- Pharmazeutische Technologie (10)
- In vitro (8)
- Gastrointestinaltrakt (7)
- Bacillus (6)
- Cytotoxizität (6)
- Magen (6)
- Feste Arzneiform (5)
Institute
- Institut für Pharmazie (219) (remove)
Publisher
- MDPI (60)
- Wiley (11)
- Frontiers Media S.A. (7)
- BioMed Central (BMC) (5)
- Springer Nature (4)
- ACS Publications (1)
Overexpression of polo-like kinase 1 (PLK1) has been found in many different types of cancers. With its essential role in cell proliferation, PLK1 has been determined to be a broad-spectrum anti-cancer target. In this study, 3D-QSAR, molecular docking, and molecular dynamics (MD) simulations were applied on a series of novel pteridinone derivatives as PLK1 inhibitors to discover anti-cancer drug candidates. In this work, three models—CoMFA (Q² = 0.67, R² = 0.992), CoMSIA/SHE (Q² = 0.69, R² = 0.974), and CoMSIA/SEAH (Q² = 0.66, R² = 0.975)—of pteridinone derivatives were established. The three models that were established gave R²(pred) = 0.683, R²(pred) = 0.758, and R²(pred) = 0.767, respectively. Thus, the predictive abilities of the three proposed models were successfully evaluated. The relations between the different champs and activities were well-demonstrated by the contour chart of the CoMFA and CoMSIA/SEAH models. The results of molecular docking indicated that residues R136, R57, Y133, L69, L82, and Y139 were the active sites of the PLK1 protein (PDB code: 2RKU), in which the more active ligands can inhibit the enzyme of PLK1. The results of the molecular dynamic MD simulation diagram were obtained to reinforce the previous molecular docking results, which showed that both inhibitors remained stable in the active sites of the PLK1 protein (PDB code: 2RKU) for 50 ns. Finally, a check of the ADME-Tox properties of the two most active molecules showed that molecular N° 28 could represent a good drug candidate for the therapy of prostate cancer diseases.
Cyanobakterien sind eine vielversprechende Quelle an strukturell diversen und biologisch hochaktiven Naturstoffen für die Entwicklung neuer Wirkstoffe. Bislang konnte die Strukturklasse der [7.7]Paracyclophane nur in fädigen Cyanobakterien der Gattungen Nostoc und Cylindrospermum nachgewiesen werden. Vorangegangene Arbeiten zeigten, dass gerade die Carbamidocyclophane chemisch und biologisch interessante Verbindungen darstellen. Im Rahmen dieser Arbeit wurden vor allem die Carbamidocyclophane produzierenden Cyanobakterien Nostoc sp. CAVN2 und Nostoc sp. CAVN10 unter besonderer Berücksichtigung der strukturellen Vielfalt an biosynthetisierten Metaboliten sowie deren antimikrobieller Aktivität umfassend charakterisiert. Um das biosynthetische Potenzial auf der metabolischen Ebene zu untersuchen, wurde im Vorfeld eine spezifische [7.7]Paracyclophan-Analytik etabliert, die skalierbare Methoden für alle Aufarbeitungsschritte beinhaltet. Die Optimierung endete in einem validierten sowie arbeits- und zeitsparenden einstufigen Extraktions- und Aufreinigungsverfahren mittels eines Zweiphasensystems und anschließender LC-UV-Analyse, um biologische Proben reproduzierbar zu analysieren und enthaltene Carbamidocyclophane zu quantifizieren. Kultivierungsstudien zum Einfluss der Temperatur an metabolisch aktiven und defizienten Nostoc-sp.-CAVN10-Kulturen ergaben einen direkten Zusammenhang zwischen der Biomassezunahme und der Temperaturerhöhung. Im Gegensatz dazu zeigten die einzelnen Carbamidocyclophan-Gehalte ein eher differenzierteres Bild über die verschiedenen Wachstumsphasen und Temperaturen hinweg. Da nur eine geringe Korrelation zwischen der spezifischen Wachstumsrate und der spezifischen Carbamidocyclophan-Produktionsrate ermittelt werden konnte, ist eine Relevanz dieser Verbindungen für den primären Zellstoffwechsel nicht ersichtlich. Bei Kultivierungsexperimenten an Nostoc sp. CAVN2 hatte der Zusatz von Chlorid- oder Bromid-Ionen eine drastische Erhöhung der Basalrate und Strukturdiversität der [7.7]Paracyclophane zur Folge. Das gleichzeitige Vorhandensein beider Halogenide im Medium zeigte kompetitive Effekte, wobei Chlorid als Substrat für den Halogenierungsprozess favorisiert wurde. Mit Hilfe eigens entwickelter Kultivierungsprozedere und Separierungsstrategien konnten insgesamt 25 Verbindungen aus Stamm CAVN2 isoliert und strukturell aufgeklärt werden. Dabei bilden die Carbamidocyclophane H–U neue chlorierte, bromierte und nicht halogenierte Naturstoffe. Zusätzlich konnten aus Stamm Cylindrospermum stagnale PCC 7417 neben den bekannten Cylindrocyclophanen A, B und D die drei neuen Cylindrofridine A–C erhalten werden. Diese stellen den Cylindrocyclophanen strukturell eng verwandte lineare Mono- und Dialkylresorcinole dar. Die vergleichende Evaluierung der Bioaktivität von 30 Reinsubstanzen ergab, dass viele Verbindungen sehr starke antimikrobielle Aktivität gegen grampositive Bakterien zeigen – besonders gegen Antibiotika-resistente Kokken mit minimalen Hemmkonzentrationen von oftmals deutlich unter 1 µM. Dabei bedingten die verschiedenen Substituenten (Carbamoyl- und Acetoxy-Reste sowie Hydroxygruppen oder Halogene) z.T. signifikante Aktivitätsunterschiede. Die Zytotoxizität der [7.7]Paracyclophane ist vor allem an das Vorhandensein des Makrozyklus gebunden, da lineare Derivate (Cylindrofridine B/C) kaum biologisch aktiv waren. Eine Ausnahme stellt dabei das nicht zytotoxische, aber antimikrobiell aktive Cylindrocyclophan-D-Monomer Cylindrofridin A dar. Die phylogenetische Analyse der 16S-rDNA-Daten bestätigte die morphologisch-taxonomische Identifizierung der Stämme CAVN2 und CAVN10 als Cyanobakterien der Gattung Nostoc und ergab weiterhin, dass alle Carbamido- und Cylindrocyclophane produzierenden Nostoc-Stämme Bestandteil einer monophyletischen Gruppe sind, die phylogenetisch distinkt zu anderen [7.7]Paracyclophan-Produzenten ist. Des Weiteren konnten keine Nukleotidunterschiede zwischen Stamm CAVN2 und CAVN10 auf den untersuchten Markergen-Sequenzen festgestellt werden, was beide auf der phylogenetischen Ebene als identisch erscheinen lässt und sie somit nur metabolisch aufgrund der strukturellen Diversität und Quantität an [7.7]Paracyclophanen differenzierbar sind. Mit Hilfe von molekulargenetischen Analyseverfahren und bioinformatorischer Auswertung konnte in Stamm CAVN2 das Carbamidocyclophan-Biosynthesegencluster mit einer Gesamtgröße von ca. 26,9 kbp identifiziert werden. Dieses beinhaltet 13 offene Leserahmen (cabA-cabM), wobei das Gen cabL für eine putative Carbamoyltransferase codiert. Ein neuer Halogenase-Typ in Verbindung mit einer Tandem-ACP-Domänen-Struktur in der Typ I Polyketidsynthase CabD könnte für die Ausbildung halogenierter Derivate verantwortlich sein. Der Nachweis eines codierenden Bereichs mit Rieske-Domäne (cabM) lässt eine direkte oxidative intermolekulare Makrozyklisierung bei der Assemblierung vermuten.
Pentathiepins are cyclic polysulfides that exert antiproliferative and cytotoxic activity in cancer cells, induce oxidative stress and apoptosis, and potently inhibit GPx1. These properties render this class of compounds promising candidates for the development of anticancer drugs. However, the biological effects and how they intertwine to promote high cytotoxicity have not been systematically assessed throughout a panel of cancer cell lines from distinct tissues of origin. In this thesis, six novel pentathiepins were analyzed and constitute the second generation of compounds with additional properties such as fluorescence or improved water solubility to facilitate cellular testing. All compounds underwent extensive biological evaluation in 14 human cancer cell lines. These studies included investigations of the inhibitory potential with regards to GPx1 and cell proliferation, examined the cytotoxicity in human cancer cell lines, as well as the induction of oxidative stress and DNA strand breaks. Furthermore, selected hallmarks of apoptosis, ferroptosis, and autophagy were studied. Experimental approaches regarding these cellular mechanisms included observing morphological changes, detecting phosphatidyl serine exposure and caspase activity, and quantifying cleaved PARP1 and levels of LC3B II. In addition, the analysis of the cell cycle aimed to identify aberrations or arrests in cell division.
Five of the six tested pentathiepins proved to be potent inhibitors of the GPx1, while all six exerted high cytotoxic and antiproliferative activity, although to different extents. There was a clear connection observed between the potential to provoke oxidative stress and damage to DNA in the form of single- and double-strand breaks both extra- and intracellularly. Furthermore, various experiments supported apoptosis but not ferroptosis as the mechanism of cell death in four different cell lines. In particular, the externalization of PS, the detection of activated caspases, and the cleavage of PARP1 corroborated this conclusion. Additionally, indications for autophagy were found, but more investigations are required to verify the current data. The findings of this dissertation are mainly in line with the postulated mechanism of action proposed for pentathiepins and a previous publication from our group that described their biological activity. However, the influence of modulators such as oxygen and GSH on the biological effects was ambiguous and dependent on the compound. The expression profile of the cell lines concerning GPx1 and CAT did not influence the cellular response toward the treatment, whereas the cell doubling time correlated with the cytotoxicity.
As the various pentathiepins give rise to different biological responses, modulation of the biological effects depends on the distinct chemical structures fused to the sulfur ring. This may allow for future optimization of the anticancer activity of pentathiepins. An analysis of the structure-activity relationships revealed that the piperazine scaffold was associated with superior biological activity compared to the pyrrolo-pyrazine backbone. Furthermore, substituents with electron-withdrawing properties or those providing a free electron pair, such as fluorine or morpholine, were advantageous. These findings should help design and synthesize the next generation of pentathiepins, thereby expanding the library of compounds, allowing for the further deduction of structure-activity relationships and an improved understanding of their mechanism of action.
For the characterization of Kv7.2/3 channel activators, several analytical methods are available that vary in effort and cost. In addition to the technically elaborate patch-clamp method, which serves as a reference method, there exist several medium to high-throughput screening methods including a rubidium efflux flame-atomic absorption spectrometry (F-AAS) assay and a commercial thallium uptake fluorescence-based assay. In this study, the general suitability of a graphite furnace atomic absorption spectrometry (GF-AAS)-based rubidium efflux assay as a screening method for Kv7.2/3 channel activators was demonstrated. With flupirtine serving as a reference compound, 16 newly synthesizedcompounds and the known Kv7.2/3 activator retigabine were first classified as either active or inactive by using the GF-AAS-based rubidium (Rb) efflux assay. Then, the results were compared with a thallium (Tl) uptake fluorescence-based fluorometric imaging plate reader (FLIPR) potassium assay. Overall, 16 of 17 compounds were classified by the GF-AAS-based assay in agreement with their channel-activating properties determined by the more expensive Tl uptake, fluorescence-based assay. Thus, the performance of the GF-AAS-based Rb assay for primary drug screening of Kv7.2/3-activating compounds was clearly demonstrated, as documented by the calculated Z’-factor of the GF-AAS-based method. Moreover, method development included optimization of the coating of the microtiter plates and the washing procedure, which extended the range of this assay to poorly adherent cells such as the HEK293 cells used in this study.
Target proteins in biotechnological applications are highly diverse. Therefore, versatile flexible expression systems for their functional overproduction are required. In order to find the right heterologous gene expression strategy, suitable host-vector systems, which combine different genetic circuits, are useful. In this study, we designed a novel Bacillus subtilis expression toolbox, which allows the overproduction and secretion of potentially toxic enzymes. This toolbox comprises a set of 60 expression vectors, which combine two promoter variants, four strong secretion signals, a translation-enhancing downstream box, and three plasmid backbones. This B. subtilis toolbox is based on a tailor-made, clean deletion mutant strain, which is protease and sporulation deficient and exhibits reduced autolysis and secondary metabolism. The appropriateness of this alternative expression platform was tested for the overproduction of two difficult-to-produce eukaryotic model proteins. These included the sulfhydryl oxidase Sox from Saccharomyces cerevisiae, which forms reactive hydrogen peroxide and undesired cross-linking of functional proteins, and the human interleukin-1β, a pro-inflammatory cytokine. For the best performing Sox and interleukin, overproducing and secreting variants of these new B. subtilis toolbox fermentation strategies were developed and tested. This study demonstrates the suitability of the prokaryotic B. subtilis host-vector system for the extracellular production of two eukaryotic proteins with biotechnological relevance.
The present study covers the synthesis, purification and evaluation of a novel aminomethacrylate-based copolymer in terms of its suitability for improving the solubility and in vitro release of poorly water-soluble drug compounds. The new copolymer was synthesized by solvent polymerization with radical initiation and by use of a chain transfer agent. Based on its composition, it can be considered as a modified type of dimethylaminoethyl methacrylate-butyl methacrylate-methyl methacrylate “EUDRAGIT® E PO” (ModE). ModE was specifically developed to provide a copolymer with processing and application properties that exceed those of commercially available (co-)polymers in solubility enhancement technologies where possible. By varying the concentration of the chain transfer agent in the radical polymerization process, the molecular weight of ModE was varied in a range of 173–305 kDa. To evaluate the solubility-enhancing properties of ModE, a series of drug-loaded extrudates were prepared by hot melt extrusion using the novel—as well as several commercially available—(co-)polymers. These extrudates were then subjected to comparative tests for amorphousness, solubility-enhancing properties, storage stability, and drug release. Celecoxib, efavirenz, and fenofibrate were used as model drugs in all experiments. Of all the (co-)polymers included in the study, ModE with a molecular weight of 173 kDa showed the best performance in terms of desired properties and was shown to be particularly suitable for preparing amorphous solid dispersions (ASDs) of the three model drugs, which in a first set of dissolution experiments showed better release behavior under pH conditions of the fasting stomach than higher molecular weight ModE types, as well as a variety of commercially available (co-)polymers. Therefore, the results demonstrate the successful synthesis of a new copolymer, which in future studies will be investigated in more detail for universal application in the field of solubility enhancement.
Abstract
Because isoenzymes of the experimentally and therapeutically extremely relevant sirtuin family show high similarity, addressing the unique selectivity pocket of sirtuin 2 is a promising strategy towards selective inhibitors. An unrelated approach towards selective inhibition of isoenzymes with varied tissue distribution is targeted drug delivery or spatiotemporal activation by photochemical activation. Azologization of two nicotinamide‐mimicking lead structures was undertaken to combine both approaches and yielded a set of 33 azobenzenes and azopyridines that have been evaluated for their photochemical behaviour and bioactivity. For some compounds, inhibitory activity reached the sub‐micromolar range in their thermodynamically favoured E form and could be decreased by photoisomerization to the metastable Z form. Besides, derivatization with long‐chain fatty acids yielded potent sirtuin 2 inhibitors, featuring another intriguing aspect of azo‐based photoswitches. In these compounds, switching to the Z isomer increased aqueous solubility and thereby enhanced biological activity by up to a factor of 21. The biological activity of two compounds was confirmed by hyperacetylation of sirtuin specific histone proteins in a cell‐based activity assay.
In recent years, the colon has become a hot topic in biopharmaceutical research as several in vitro models of the human colon have been presented. A major focus is on the characterization of the microbiota and its capabilities. The aim of the present study was to further develop the MimiCol, preserving its properties and accelerating data acquisition. Emphasis was placed on the simplicity of its design and easy scalability. To prove the viability of the concept, degradation of sulfasalazine was investigated, and the bacterial composition during the experiment was assessed by 16S rRNA sequencing. The transfer of the experimental conditions to the new model was successful. Commercially available components were implemented in the setup. The model MimiCol3 represented the colon ascendens satisfactorily in its properties regarding volume, pH value, and redox potential. 16S rRNA sequencing led to further insights into the bacterial composition in the vessels. Degradation of sulfasalazine was in good agreement with in vivo data. The new model of the colon ascendens MimiCol3 enabled us to collect more reliable data, as three experiments were conducted simultaneously under the same conditions.
Im Rahmen der vorliegenden Arbeit wurde ein auf dem Promotor Pdes basierendes Kälte-induzierbares Expressionssystem für B. subtilis konstruiert und sukzessive optimiert. Dazu wurden verschiedene Kälte-regulatorische DNA-Sequenzen aus B. subtilis an das entsprechende Zielgen fusioniert, was neben der Kälte-Induzierbarkeit in einem positiven Einfluss auf die Expressionsstärke durch eine effizientere Translation bzw. Stabilisierung der mRNA resultierte. Vorausgehend wurde in vergleichenden Versuchen die Eignung unterschiedlicher Galaktosidasen zur Verwendung als Reporterenzyme für B. subtilis untersucht. Hierbei wurde erstmals die heterologe Expression einer Kälte-angepassten β-Galaktosidase aus P. haloplanktis TAE79 in B. subtilis durchgeführt und diese durch die Integration der DB-Sequenz sowie einer stem-loop-Struktur aus der 5‘-UTR des B. subtilis cspB-Gens gesteigert. Somit konnte nachgewiesen werden dass sowohl die additiven Sequenzen der cspB-DB und der cspB-sl-UTR als auch des bkdB-Terminators zu einer deutlich erhöhten Synthese der entsprechenden Zielproteine führt. Anhand der Überexpression einer Xylanase aus B. subtilis sowie einer α-Glucosidase aus S. cerevisiae wurde abschließend die Eignung des konstruierten Systems für die sekretorische und intrazelluläre Proteinsynthese in B. subtilis demonstriert. Diese Ergebnisse bestätigen die Eignung von B. subtilis als Wirtsorganismus auch für die Überproduktion kritischer, schwer zu faltender Proteine.
Analysis and Reduction of Cellular Heterogeneity in Strain Optimization of Bacillus licheniformis
(2021)
Bacillus species invest substantial resources in inherent cellular processes for pre-adaptation to environmental changes, many of which are dispensable in the controlled environment of industrial bioprocesses. The underlying physiological mechanisms are well characterized in B. subtilis, but only little is known about these processes in the closely related B. licheniformis. Moreover, experimental conditions in previous studies differ from industrial settings in most parameters, foremost in batch cultures or plate-based analysis over fed-batch processes. In this thesis, cellular heterogeneity was analyzed in B. licheniformis in optimized, nutrient-rich media in batch and fed-batch cultivations. Systematic inactivation of genes involved in biofilm formation and synthesis of the flagellar apparatus or global regulators thereof resulted in higher protein production and provided new insights into biofilm formation and cellular heterogeneity in this strain.
Species of the genus Drosera, known for carnivorous plants, such as sundew, have been traditionally used for centuries as medicinal plants. Efficacy-determining compounds are naphthoquinones and flavonoids. Flavonoids possess a broad spectrum of bioactive properties, including biofilm inhibitory activity. Biofilms render antibiotics ineffective, contributing to the current rise in antimicrobial resistance. In this study, the biofilm inhibitory activity of two European sundew species (Drosera rotundifolia and Drosera intermedia) grown agriculturally in Germany and four commercial sundew products (declared as Drosera longifolia, Drosera sp. and Drosera planta trit.) against three multidrug-resistant Escherichia coli strains was tested. The aim of the study was to comparatively investigate the biofilm inhibitory potential of sundew species extracts grown locally in northern Germany and commercial sundew products. The minimum biofilm inhibitory concentration of the European sundew species was approx. 35 µg mL−1. In comparison, commercial sundew products ranged in concentration from 75 to 140 µg mL−1. Additionally, individual compounds isolated from European sundew were tested. Among these compounds, biofilm inhibitory activity was determined for four of the eight substances, with 2″-O-galloyl hyperoside standing out for its activity (38 µg mL−1). The whole plant extracts of Drosera rotundifolia and Drosera intermedia proved to be more effective than the commercial products and the single compounds in its biofilm inhibition activity against Escherichia coli strains. Sundew extracts may serve as a potential therapeutic approach for targeting biofilm production.
Anwendung additiver Fertigungstechniken zur Herstellung und Applikation oraler Darreichungsformen
(2021)
Der 3D-Druck hat in den vergangenen Jahren einen enormen Interessenzuwachs erzeugt. Aufgrund der einfachen Zugänglichkeit und Bedienbarkeit und aufgrund seiner enormen Möglichkeiten als additive Fertigungstechnologie ist das große Potenzial dieser Technologie auch im pharmazeutischen Bereich nicht verborgen geblieben. Daraus hat sich ein Hype ergeben, welcher 2015 sogar in der Zulassung des ersten 3D-gedruckten Fertigarzneimittels Spritam® durch die FDA resultierte. Jedoch ist dieses Präparates gleichzeitig auch ein gutes Beispiel für die Limitationen des 3D-Druckes. Die Herstellung einer 3D-gedruckten Spritam®-Tablette kostet ein Vielfaches im Vergleich zur Herstellung mit konventioneller Tablettierung. Daraus ergibt sich fast schon zwangsläufig, dass der 3D-Druck sich nicht als Technologie zu Herstellung klassischer oraler Darreichungsformen eignet. Seine Möglichkeiten liegen viel mehr im Gebiet der Individualisierung von Arzneiformen und der Entwicklung von Arzneiformen und Medizinprodukten. Hier kann das Potenzial dieser Technologie wesentlich effizienter ausgeschöpft werden. Daher war es das Ziel dieser Arbeit, den 3D-Druck zu nutzen, um innovative und individualisierbare Darreichungsformen zu entwickeln. Außerdem sollte mittels 3D-Druck eine Applikationshilfe für eine innovative Darreichungsform entwickelt werden. Auch die Herstellung von Minitabletten für die pädiatrische Anwendung wurde untersucht.
Die durchgeführten Untersuchungen zeigten, dass der 3D-Druck vielfältige Anwendung in der Pharmazie finden kann. So konnten unter Nutzung des 3D-Druckes lebensmittelechte Applikatoren hergestellt werden, die die In vivo-Testung der innovativen Darreichungsform EsoCap erst ermöglichte und so im Rahmen einer Machbarkeitsstudie die prinzipielle Funktionalität dieser Darreichungsform zeigte. Dabei bietet der 3D-Druck im Rapid Prototyping den Vorteil, dass es sich um eine vergleichsweise günstige und schnell zu realisierende Technik handelt. Weiterhin bieten die leichte Bedienbarkeit, die realisierbare Formenvielfalt, eine Vielzahl zur Verfügung stehender Filamente mit unterschiedlichsten Eigenschaften und der niederschwellige Zugang zu dieser Technologie auch Personen ohne entsprechenden Hintergrund die Möglichkeit zur Prototypenentwicklung. Dies ermöglicht eine schnelle und angepasste Entwicklung ohne weitere Beteiligung externer Institute oder Dienstleiter. Darüber hinaus kann der 3D-Druck auch Anwendung in der Modifizierung von Freisetzungstestern finden oder zur Ersatzteilproduktion dienen. Auch zur Herstellung von Darreichungsformen mit neuartigen Freisetzungsmechanismen kann der 3D-Druck genutzt werden. Dabei zeigte sich in der durchgeführten In vivo-Studie an Hunden, dass eine prinzipielle Herstellung mittels 3D-Druck möglich ist, aber auch Limitationen, speziell des FDM-basierten 3D-Druckes, aufweist. So zeigte sich eine mangelnde Reproduzierbarkeit bei der Herstellung der drucksensitiven Arzneiform, die wahrscheinlich dazu führte, dass bei der Hälfte der Applikationen bei den Versuchstieren die Kapsel nicht durch die physiologischen Kräfte zerstört wurde und so keinen Wirkstoff freisetzte. Hierbei bleibt anzumerken, dass durch Nutzung alternativer additiver Herstellungsverfahren im Rahmen weiterer Untersuchungen diese Problematik weiter erforscht werden kann. Nichtsdestotrotz ermöglicht der 3D-Druck die Herstellung von Darreichungsformen mit neuartigen Freisetzungsmechanismen, die mittels konventionellen Herstellungstechniken schwer beziehungsweise gar nicht hergestellt werden können. Im letzten Punkt dieser Arbeit wurde der 3D-Druck als alternatives Herstellungsverfahren für pädiatrische Arzneimittel untersucht. Dazu wurden Minitabletten mit unterschiedlichen Durchmessern unter Variation der Wirkstoffe und Polymere hergestellt. Dabei zeigte sich, dass der 3D-Druck sowohl die Möglichkeit bietet, über die Variation der Anzahl applizierter Minitabletten als auch über die Variation der Größe eine Dosisindividualisierung vorzunehmen. Die so hergestellten Arzneimittel entsprachen dabei auch den Vorgaben des europäischen Arzneibuches hinsichtlich der Massegleichförmigkeit. Damit konnte gezeigt werden, dass die Herstellung von Minitabletten mittels 3D-Druck eine Alternative zu der konventionellen Kapselherstellung darstellt. Dabei bleibt anzumerken, dass weitere Untersuchungen notwendig sind, um weitere, im Bereich der Pädiatrie eingesetzten Arzneistoffe auf ihre Eignung für die Schmelzextrusion und den 3D-Druck zu untersuchen.
Zusammenfassend konnte in der vorliegenden Arbeit gezeigt werden, dass die Verwendung additiver Herstellungsverfahren wie der FDM-basierte 3D-Druck in der Pharmazie auf unterschiedlichste Weise Anwendung finden kann. So können zum einen schnell, einfach und auch kostengünstig Prototypen und auch Ersatzteile hergestellt werden. Dieser Aspekt und die Tatsache, dass auch ohne umfangreiche Schulungen der 3D-Druck nutzbar ist, zeigen auf, dass der 3D-Druck ein nützliches Werkzeug im Bereich des Rapid Prototypings von Applikationshilfen, aber auch im Bereich der Entwicklung von biorelevanten Testmodellen darstellt. Auch können durch die Nutzung des 3D-Druckes neuartige, innovative Freisetzungssysteme hergestellt und getestet werden. Darüber hinaus schaffen additive Fertigungstechniken weiterhin die Möglichkeit, mögliche Alternativen im Bereich der Herstellung pädiatrischer Arzneimittel herzustellen.
In der vorliegenden Arbeit sollten zwei verschiedene Wirkstoffklassen auf ihre Fähigkeit Apoptose und Autophagozytose zu aktivieren analysiert werden. Dabei wurden 39 Sigma-Rezeptor-Liganden, die an der Universität Münster (Arbeitsgruppe von Prof. Bernhard Wünsch) synthetisiert wurden, zunächst auf ihre antiproliferativen Eigenschaften in acht humanen Krebszelllinien untersucht. Anhand der Struktur-Wirkungs-Beziehungen konnte gezeigt werden, dass sich große, raumfüllende Substituenten an beiden N-Atomen des Piperazin-Grundgerüstes positiv auf die Hemmung des Zellwachstums auswirken. Da die Multiple Myelom Zellinie RPMI 8226 eine hohe Dichte an Sigma-Rezeptoren exprimiert, wurde sie für weitere Versuche herangezogen. Als repräsentative Liganden wurde das Enantiomerenpaar (S)-11 und (R)-11 für weitere Versuche ausgewählt, da es neben einer guten Affinität zu beiden Rezeptor-Subtypen auch antiproliferierende Eigenschaften in der RPMI 8226-Zelllinie zeigte. Die Behandlung führte zur zeitabhängigen Induktion der Apoptose, die mit den typischen Charakteristika wie morphologische Membranausstülpungen, Annexin-V positive Zellen und der Chromatinkondensation einherging. Die Detektion von aktivierter Caspase-3, -8 und -9 im Durchflusszytometer deutete zunächst auf eine Beteiligung beider Signalwege der Apoptose hin. Da im Western Blot keine Caspase-9-Spaltprodukte detektiert werden konnten und auch die Vorinkubation mit den Caspase-Inhibitoren z-VAD-FMK und M50054 keinen Effekt auf die Apoptoserate bewirkte, scheinen die Caspasen im Sigma-Ligand-vermittelten Zelltod eine untergeordnete Rolle einzunehmen. Die frühe Abnahme des mitochondrialen Membranpotentials verbunden mit der zunehmenden Konzentration des Apoptose-induzierenden Faktors (AIF) im Zytosol der RPMI 8226-Zellen deuten ebenfalls auf eine Caspase-unabhängige Form der Apoptose hin, die besonders für Sigma(2)-Agonisten bereits beschrieben ist. Und auch in diesem Projekt zeigen die Sigma-Liganden zytotoxische Aktivitäten, wenn sie eine Affinität zum Sigma(2)-Rezeptor aufweisen. Neben der Apoptose konnten (S)-11 und (R)-11 auch die Autophagozytose induzieren. Dieser Prozess scheint jedoch der Apoptose nachgeschaltet zu sein und weist darauf hin, dass es sich nicht um einen Schutzmechanismus der Zelle handelt, sondern eher in einer direkten Form des programmierten Zelltodes vom Typ II begründet ist. Dieser ist bisher noch nicht für Sigma-Rezeptor-Liganden beschrieben und könnte einen Vorteil gegenüber anderen Vertretern dieser Wirkstoffklasse darstellen. Eine Gemeinsamkeit von Sigma-Ligand-induzierter Apoptose und Autophagozytose liegt in ihrer Aktivierung durch die Lipidperoxidation. Es wurde ein sehr früher Anstieg von LPO-Produkten detektiert, der sich nur durch das lipophile Antioxidans alpha-Tocopherol beeinflussen ließ. Desweiteren konnte die antiproliferierende Wirkung von (S)- 11 und (R)-11 im MTT-Assay komplett blockiert werden, und auch die Apoptoseraten wurden durch den Radikalfänger signifikant erniedrigt. Die Hemmung der LC3-II-Expression im Western Blot durch alpha-Tocopherol verdeutlicht auch hier die Beteiligung der LPO an der Autophagozytose. Als Vertreter einer weiteren Wirkstoffklasse wurde der phtoaktivierbare Pt(IV)-Komplex FM 165, der in der Arbeitsgruppe von Prof. Dr. Peter Sadler (Universität Warwick, UK) synthetisiert wurde, untersucht. Die antiproliferierenden Eigenschaften der photoaktivierbaren Pt(IV)-Verbindung können nicht mit der Apoptose als Zelltodmechanismus begründet werden. In diesem Fall ließen sich keine morphologischen Charakteristika nachweisen und auch die Annexin-V Anfärbung fiel negativ aus. Die weiteren Untersuchungen zeigten jedoch auch die Aktivierung der Autophagozytose durch Expression von LC3-II und p62 im Western Blot. Eine Hemmung lysosomaler Enzyme durch die Protease-Inhibitoren E64d und Pepstatin A führte zu erhöhten LC3-II-Konzentrationen sowie einer p62-Akkumulation. Im Gegensatz zu den Sigma-Rezeptor-Liganden deutet dies eher auf eine vollständige Verlaufsform hin. Da die Autophagozytose bereits nach 6 h-Behandlung mit FM 165 detektiert wurde, ist es nicht ausgeschlossen, dass es sich zunächst um eine zellschützende Funktion handeln könnte. Auch beim FM 165 scheinen oxidative Vorgänge eine wichtige Rolle hinsichtlich der Autophagozytose-Aktivierung zu übernehmen. Nach erfolgter Photoaktivierung der Zellen ließen sich ansteigende ROS Konzentrationen verzeichnen, die nach 2 h deutlich wurden und somit noch vor der Autophagozytose entstehen.
Application of In Vivo Imaging Techniques and Diagnostic Tools in Oral Drug Delivery Research
(2022)
Drug absorption following oral administration is determined by complex and dynamic interactions between gastrointestinal (GI) physiology, the drug, and its formulation. Since many of these interactions are not fully understood, the COST action on “Understanding Gastrointestinal Absorption-related Processes (UNGAP)” was initiated in 2017, with the aim to improve the current comprehension of intestinal drug absorption and foster future developments in this field. In this regard, in vivo techniques used for the characterization of human GI physiology and the intraluminal behavior of orally administered dosage forms in the GI tract are fundamental to gaining deeper mechanistic understanding of the interplay between human GI physiology and drug product performance. In this review, the potential applications, advantages, and limitations of the most important in vivo techniques relevant to oral biopharmaceutics are presented from the perspectives of different research fields.