Refine
Year of publication
Document Type
- Doctoral Thesis (160)
- Article (97)
- Conference Proceeding (17)
Has Fulltext
- yes (274)
Is part of the Bibliography
- no (274)
Keywords
- - (78)
- Plasma (25)
- Plasmaphysik (25)
- Plasmadiagnostik (14)
- Stellarator (13)
- Komplexes Plasma (7)
- Polyelektrolyt (7)
- Wendelstein 7-X (7)
- Cluster (6)
- Kernfusion (6)
- dusty plasma (6)
- Atmosphärendruckplasma (5)
- Hochfrequenzplasma (5)
- Ionenfalle (5)
- Massenspektrometrie (5)
- Metallcluster (5)
- barrier discharge (5)
- Adsorption (4)
- Barrierenentladung (4)
- Diffusion (4)
- Divertor (4)
- Fusion (4)
- Fusionsplasma (4)
- Magnetron (4)
- Modellierung (4)
- Niedertemperaturplasma (4)
- Penningfalle (4)
- Physik (4)
- Plasma-Wand-Wechselwirkung (4)
- Plasmachemie (4)
- Plasmadynamik (4)
- Polyanion (4)
- Simulation (4)
- Spektroskopie (4)
- Turbulenz (4)
- magnetron sputtering (4)
- plasma (4)
- stellarator (4)
- surface charge (4)
- 52.70.Ds (3)
- Absorptionsspektroskopie (3)
- Aluminium (3)
- Clusterion (3)
- Dissertation (3)
- Ellipsometrie (3)
- Emissionsspektroskopie (3)
- FT-IR-Spektroskopie (3)
- Festkörperphysik (3)
- Flugzeitspektrometrie (3)
- Gasentladung (3)
- Glimmentladung (3)
- Kernphysik (3)
- Laser (3)
- Laserinduzierte Fluoreszenz (3)
- Laserspektroskopie (3)
- Leuchtstofflampe (3)
- Penning trap (3)
- Plasma Physics (3)
- Plasmamedizin (3)
- Plasmarandschicht (3)
- Polymere (3)
- Quantenoptik (3)
- Selbstorganisation (3)
- Tokamak (3)
- laser spectroscopy (3)
- mass separation (3)
- negative ions (3)
- oxygen (3)
- plasma diagnostics (3)
- polyanion (3)
- tokamak (3)
- turbulence (3)
- 3D (2)
- Abstimmbarer Laser (2)
- Alfvén-Welle (2)
- Anion (2)
- Atmosphärendruck (2)
- Beschichten (2)
- Beschichtung (2)
- Brennfleck (2)
- Cardiolipin (2)
- Clusterphysik (2)
- Computerphysik (2)
- Driftwelle (2)
- Dynamik (2)
- Emission (2)
- FTIR spectroscopy (2)
- Festkörper (2)
- Floquet (2)
- Flugzeitmassenspektrometrie (2)
- Fragmentation (2)
- Fullerene (2)
- Fusionsreaktor (2)
- Graphen (2)
- Heißes Plasma (2)
- Helium (2)
- HiPIMS (2)
- Impurities (2)
- Infrarotspektroskopie (2)
- Instabilität (2)
- Kaltes Plasma (2)
- Kathode (2)
- Kernstruktur (2)
- Lipide (2)
- Low Temperature Plasma (2)
- MR-ToF MS (2)
- MR-ToF device (2)
- Magnetfeld (2)
- Magnetic Confinement (2)
- Magnetische Rekonnexion (2)
- Magnetohydrodynamik (2)
- Monoschicht (2)
- Monte-Carlo-Simulation (2)
- Multi-reflection time-of-flight mass spectrometry (2)
- Nanopartikel (2)
- Neutronenbeugung (2)
- Nuclear Physics (2)
- Optisches Messgerät (2)
- Optomechanik (2)
- Oxidation (2)
- Plasma physics (2)
- RNS (2)
- ROS (2)
- Rasterkraftmikroskopie (2)
- Reflektometrie (2)
- Rekonstruktion (2)
- Röntgenreflektometrie (2)
- Sauerstoff (2)
- Sekundärelektronen (2)
- Stereoskopie (2)
- Stickstoff (2)
- Theoretische Physik (2)
- W7-AS (2)
- W7-X (2)
- Weiche Materie (2)
- X-ray diffraction (2)
- Xenon (2)
- atmospheric pressure (2)
- atomic clusters (2)
- atomic force microscopy (2)
- cell mechanics (2)
- cold physical plasma (2)
- complex plasma (2)
- dusty plasmas (2)
- electrode (2)
- electron–hole plasma (2)
- erosion (2)
- gap voltage (2)
- guided streamer (2)
- inductively coupled plasma (2)
- ion mass spectrometry (2)
- ionosphere (2)
- laser photodetachment (2)
- laser-induced fluorescence (2)
- low temperature plasma (2)
- magnetic fields (2)
- mapping (2)
- memory effect (2)
- microwave interferometry (2)
- mode transition (2)
- multi-reflection time-of-flight mass spectrometry (2)
- numerical simulation (2)
- plasma chemistry (2)
- plasma medicine (2)
- polyelectrolyte multilayer (2)
- polyelectrolytes (2)
- pre-ionization (2)
- reconstruction (2)
- solar EUV (2)
- stereoscopy (2)
- surface charges (2)
- topologische Isolatoren (2)
- 4D flow MRI (1)
- 52.27.Lw (1)
- 52.50.Dg (1)
- 52.65.-y (1)
- 52.75.Hn (1)
- 52.80.Hc (1)
- 7755384-6 (1)
- 89.75.Fb (1)
- AFM (1)
- AFM-Kraft-Abstandskurven (1)
- AOM (1)
- ARPES (1)
- ASDEX (1)
- ASDEX Upgrade (1)
- Ab-initio-Rechnung (1)
- Abregung (1)
- Absorption Spectroscopy (1)
- Aktivität <Konzentration> (1)
- Alfven (1)
- Alfvén Waves (1)
- Algorithm (1)
- Algorithmen (1)
- Algorithmus (1)
- Aluminium Cluster (1)
- Aluminium cluster (1)
- Aminogruppe (1)
- Aminogruppen (1)
- Anode (1)
- Antikoagulans (1)
- Antrieb (1)
- Argon metastables (1)
- Artificial nerual networks (1)
- Astrophysik (1)
- Atmospheric pressure plasma (1)
- Atmosphärendruckentladung (1)
- Atomabsorptionsspektroskopie (1)
- Atomemissionsspektroskopie (1)
- Atomgewicht (1)
- Atomspektrum (1)
- Auftrittsgröße (1)
- BAM (1)
- Barium (1)
- Bayes'sche Datenanalyse (1)
- Bayes-Verfahren (1)
- Bayesian Data Analysis (1)
- Beam (1)
- Biasing (1)
- Binäres Gemisch (1)
- Biomechanics (1)
- Biomembran (1)
- Biomolecules (1)
- Blei (1)
- Bogenentladung (1)
- Boltzmann equation (1)
- Bootstrap current (1)
- Bose-Einstein Kondensation (1)
- Bose-Einstein condensation (1)
- Bose-Einstein-Kondensation (1)
- Brennstoffzelle (1)
- Brewster angle microscopy (1)
- Bündelbildung (1)
- Bürstenpolymere (1)
- CD Spektroskopie (1)
- Cadmium (1)
- Cavity Enhanced Absorption Spectroscopy (1)
- Cavity Ring-Down Spectroscopy (1)
- Cavity-Enhanced-Absorptionsspektroskopie (1)
- Cavity-Ring-Down-Spektroskopie (1)
- Cell biophysics (1)
- Cell cultures (1)
- Cell mechanics (1)
- Cell processes and subcellular processes (1)
- Cells (1)
- Cluster beam (1)
- Cluster charge (1)
- Cluster flow (1)
- Cluster formation (1)
- CoFeB (1)
- Coatings (1)
- Coil Optimization (1)
- Collisions (1)
- Colloidal Probe Technique (1)
- Complex plasma (1)
- Computersimulation (1)
- Connection length (1)
- Correlation Analysis (1)
- DBD (1)
- DIT (1)
- DNA (1)
- De-Excitation (1)
- Dense Plasmas (1)
- Density (1)
- Destabilisierung (1)
- Detachment (1)
- Diagnostik (1)
- Diamant (1)
- Dichte Plasmen (1)
- Dichtematrix (1)
- Dielectric Barrier Discharge (1)
- Dielektrische Entladung (1)
- Digital Ion Trap (1)
- Digital ion trap (1)
- Digitale Ionenfalle (1)
- Diodenlaser mit externem Resonator (1)
- Dirac-cone physics (1)
- Direct Force Measurement (1)
- Dispersion function (1)
- Dispersionsrelation (1)
- Dissipation (1)
- Domänen-Wachstum (1)
- Doppler cooling (1)
- Drift-Diffusions-Modell (1)
- Driftwellen (1)
- Duennschichten (1)
- Durchbruch (1)
- Dust acoustic waves (1)
- Dusty Plasma (1)
- Dusty plasma (1)
- Dämpfung (1)
- Dünne Filme (1)
- Dünne Schicht (1)
- Dünne Schichten (1)
- Dünnes Plasma (1)
- ECDL (1)
- ECRH (1)
- EEDF (1)
- EEVF (1)
- EPR (1)
- Edelgas (1)
- Effluent (1)
- Einmodenlaser (1)
- Eisen-Polypyrrol (1)
- Elastizität (1)
- Electric Propulsion (1)
- Elektrische Polarisation (1)
- Elektrischer Strom / Messung (1)
- Elektrode (1)
- Elektron (1)
- Elektronegative Plasmen / negative Ionen (1)
- Elektronenbad (1)
- Elektronendichte (1)
- Elektronenemission (1)
- Elektronenkinetik (1)
- Elektronenparamagnetische Resonanz (1)
- Elektronenstreuung (1)
- Emission Spectroscopy (1)
- Emissionsentwicklung (1)
- Emitter (1)
- Empfindlichkeit (1)
- Energiereiches Teilchen (1)
- Entropie (1)
- Erosion (1)
- Escape factor (1)
- Ethylenglykol (1)
- ExB-Drift (1)
- ExB-drift (1)
- Expansion (1)
- Exziton (1)
- FCT-Verfahren (1)
- FT-ICR-Spektroskopie (1)
- FTIR (1)
- FTIR-Spektrometrie (1)
- Far (1)
- Fast Particles (1)
- FeSe (1)
- Feldlinienverschmelzung (1)
- Femtosecond lasers (1)
- Fernerkundung (1)
- Finite Systeme (1)
- Finite-element analysis (1)
- Fluid flows (1)
- Fluid-Modellierung (1)
- Fluktuationen (1)
- Fluoreszenz (1)
- Fluorkohlenstoffhaltigen Plasmen (1)
- Fluorocarbon Plasmas (1)
- Flüssigkeiten (1)
- Fourier analysis (1)
- Fusion , Plasma , Plasmaphysik (1)
- Fusion plasma (1)
- Fusion plasmas (1)
- F‐actin (1)
- GID (1)
- GPU computing (1)
- GaAs sputtering (1)
- Gallium (1)
- Gallium-Oxide (1)
- Galliumoxid (1)
- Gas Cell (1)
- Gasaufzehrung (1)
- Gaselektronik (1)
- Gasphasenabscheidung (1)
- Gastemperatur (1)
- Gaszelle (1)
- Gaussian beam (1)
- Glass (1)
- Glimmentladungsspektroskopie (1)
- Graphene (1)
- Green-Funktion (1)
- Greenwald (1)
- Group (1)
- Guided Streamer (1)
- Gyro-kinetic Theory (1)
- Gyrokinetik (1)
- H-L back transition (1)
- Hamburg / Deutsches Elektronen-Synchrotron (1)
- Heat flux (1)
- Heat load (1)
- Heat-flux (1)
- Heparin (1)
- Heterostructures (1)
- Heterostrukturen (1)
- High-Precision Mass Spectrometry (1)
- High-Temperature (1)
- Hoch Performanz (1)
- Hochfrequenzentladung (1)
- Hochfrequenzplasma / Plasmadynamik / Interferometrie / Photodetachment / Sauerstoff Plasma (1)
- Hot plasma (1)
- Hy (1)
- Hybrid-Verfahren (1)
- Hybridisierungstheorie (1)
- Hydrogen peroxide (1)
- Hydroperoxyl (1)
- IR-TDLAS (1)
- ISOLDE/CERN (1)
- ISOLTRAP (1)
- Impulsübertragung (1)
- Informationstheorie (1)
- Infrarot (1)
- Infrarotabsorption (1)
- Innere Energie (1)
- Instrumentation for FEL (1)
- Instrumentation for radioactive beams (fragmentation devices, fragment and isotope, separators incl. ISOL, isobar separators, ion and atom traps, weak-beam diagnostics, radioactive-beam ion sources) (1)
- Intermittenz (1)
- Interpenetrierendes polymeres Netzwerk (1)
- Ion Thruster (1)
- Ion Traps (1)
- Ion thrusters (1)
- Ion traps (1)
- Ionenbeschuss (1)
- Ionendichte (1)
- Ionenfallen (1)
- Ionenimplantation (1)
- Ionenstrahlfalle (1)
- Ionentriebwerk (1)
- Ionthruster (1)
- Isothermal Titration Calorimetry (1)
- Jet (1)
- Kalorimetrie (1)
- Katalysator (1)
- Kernmassenmessungen (1)
- Kerr microscopy (1)
- Kinetic Transport Theory (1)
- Kinetic simulation (1)
- Kinetische Gastheorie (1)
- Kinetische Theorie (1)
- Kinetische Transporttheorie (1)
- Kobalt-Polypyrrol (1)
- Kondo effect (1)
- Konformation (1)
- Kontaktmodell (1)
- Kontraktion (1)
- Kontrolle (1)
- Korrespondenzprinzip (1)
- Kraftmikroskopie (1)
- Kreuzkorrelationsspektroskopie (1)
- Kupfer-Release (1)
- Kupfer-T (1)
- Kupferoxid <Kupfer(I)oxid> (1)
- Kupferoxid <Kupfer(II)-oxid> (1)
- Künstliche Intelligenz (1)
- LE/LC phase transition (1)
- Laboratory experiment (1)
- Laboratory procedures (1)
- Laborexperiment (1)
- Ladungsdichtewelle (1)
- Ladungstransfer (1)
- Lamellare Phase (1)
- Laminar flows (1)
- Langmuir Monolayers (1)
- Langmuir probe (1)
- Langmuir probe diagnostics (1)
- Langmuir-Blodgett and Schaefer techniques (1)
- Langmuir-Sonde (1)
- Laser spectroscopy (1)
- Laser-Cluster-Wechselwirkung (1)
- Laser-cluster interaction (1)
- Laser-induced fluoresence (LIF) (1)
- Laserdiod (1)
- Laserdurchstimmung (1)
- Laserheizung (1)
- Laterale Selbststrukturierung, Polyelektrolyt, Multischicht (1)
- Least-squares method (1)
- Leuchtwerbung (1)
- Lichtstreuung (1)
- Linienprofilfunktion (1)
- Lipid monolayers (1)
- Lipid-Monoschichten (1)
- Lipid-Oxidation (1)
- Lokale-Feld-Näherung (1)
- Lokale-Mittlere-Energie-Näherung (1)
- Low temperature plasma (1)
- Luftleuchten (1)
- L–H transition (1)
- MG-63 (1)
- MG-63 Zellen (1)
- MG-63 cells (1)
- MIR-Spektroskopie (1)
- Machine learning (1)
- Madden-Julian Oscillation (1)
- Magnetfelddiagnostik (1)
- Magnetic edge properties (1)
- Magnetic field diagnostics (1)
- Magnetic fields (1)
- Magnetic reconnection (1)
- Magnetische Rekonnektion (1)
- Magnetischer Einschluss (1)
- Magnetischer Sensor (1)
- Magnetismus (1)
- Magnetized (1)
- Magnetron sputtering (1)
- Marangoni flow (1)
- Mass Specrtometry (1)
- Mass spectrometers (1)
- Mass spectrometry (1)
- Massenspektroskopie (1)
- Master-Gleichung (1)
- Mathematische Modellierung (1)
- Matrix (1)
- Mechanical properties (1)
- Mechanical stress (1)
- Mechanik (1)
- Mehrfach negativ geladene (1)
- Mehrschichtsystem (1)
- Metall-Isolator-Phasenumwandlung (1)
- Metall-Polymer Verbindungen (1)
- Metalle (1)
- Microfluidic devices (1)
- Microfluidics (1)
- Microgravity (1)
- Microwave interferometry / Electron density / Laserphotodetachment (1)
- Mid-IR absorption spectroscopy (1)
- Mie-Theorie (1)
- Mikrofluidik , Mechanik , Zelle , Holographie , Hologramm , Deformation , Biomedizin , Bluttransfusion , Cytometrie , Viskoelastizität (1)
- Mikroplasma (1)
- Mikrowelleninterferometer (1)
- Mikrowellenplasma (1)
- Mineral (1)
- Model Membranes (1)
- Modell (1)
- Modellbildung (1)
- Moden (1)
- Modendynamik (1)
- Modenübergang (1)
- Molecular Kinetics (1)
- Molekulardynamik (1)
- Molekülkinetik (1)
- Multireflexionsflugzeitmassenspektrometrie (1)
- Multischicht (1)
- Multiterm (1)
- N incorporation (1)
- NBI (1)
- NEXT (1)
- NIR-Spektroskopie (1)
- Nachstellungsszenarien (1)
- Nachtluftleuchten (1)
- Nanocluster (1)
- Nanokompositschichten (1)
- Nanoparticles (1)
- Nanoplasmamodell (1)
- Negative ion (1)
- Neoclassical transport (1)
- Nerve cells (1)
- Neutral Beam Injection (1)
- Neutralisation (1)
- Neutralization (1)
- Neutrino (1)
- Neutronenreflektometrie (1)
- Neutronenschalenabschluss (1)
- Neutronenstern (1)
- Nichtgleichgewicht (1)
- Nichtisothermisches Plasma (1)
- Nichtlineare Dynamik (1)
- Niederdruckentladung (1)
- Niederdruckplasma (1)
- Niedertemperatur-Plasma (1)
- Nuclear Structure (1)
- Nuclear fusion (1)
- Nukleosynthese (1)
- OLR-based MJO Index (1)
- OMI (1)
- Oberfläche (1)
- Oberflächenkräfte (1)
- Oberflächenladung (1)
- Oberflächenladungen (1)
- Oberflächenmodifizierung (1)
- Oberflächenstöße (1)
- Operante Konditionierung (1)
- Oxidative stress (1)
- P3M (1)
- PDADMA (1)
- PECVD (1)
- PECVD-Verfahren (1)
- PEI,PDADMA,PSS,surface forces,atomic force microscopy, colloidal probe (1)
- PIC (1)
- PSS (1)
- PVD (1)
- PWV (1)
- Parallelstrom (1)
- Particle flux (1)
- Particle in Cell Simulation (1)
- Particle-in-Cell (1)
- Particle-in-cell (1)
- Particle-in-cell method (1)
- Paul-Falle (1)
- Penning Trap (1)
- Penning-Falle (1)
- Permeationsbarriere (1)
- Phase transitions (1)
- Phasenübergänge (1)
- Phaseresolved Diagnostic (1)
- Phospholipide (1)
- Phospholipids (1)
- Photoströme (1)
- Plasma , Plasmaphysik , Laser , Fluoreszenz , Interferometer , Wakefield , CERN , Kielfeld-Beschleuniger , Teilchenbeschleuniger , Laserinduzierte Fluoreszenz (1)
- Plasma , Plasmaphysik , Tokamak , Stellarator , Magnetohydrodynamik , Kinetische Theorie , Simulation , Alfvén-Welle , Energiereiches Teilchen (1)
- Plasma / Turbulenz (1)
- Plasma Chemistry (1)
- Plasma Instability (1)
- Plasma Modeling (1)
- Plasma Surface Interaction (1)
- Plasma diagnostics (1)
- Plasma diagnostics techniques and instrumentation (1)
- Plasma dynamics (1)
- Plasma medicine (1)
- Plasma surface interaction (1)
- Plasma-Flüssigkeits-Wechselwirkung (1)
- Plasma-Immersions-Implantation (1)
- Plasma-Oberflächen-Wechselwirkung (1)
- Plasma-wall interaction (1)
- Plasmainstabilität (1)
- Plasmajet (1)
- Plasmanitrieren (1)
- Plasmaschwingung (1)
- Plasmasimulation (1)
- Plasmasonde (1)
- Plasmaspektroskopie (1)
- Plasmastrom (1)
- Plasmatheorie (1)
- Plasmatransport (1)
- Plasmawelle (1)
- Plasmonik (1)
- Pockels-Effekt (1)
- Pockels-effect (1)
- Polarisation (1)
- Polaron (1)
- Polyanionen (1)
- Polyanions (1)
- Polydimethylsiloxan (1)
- Polyelektrolytbürste (1)
- Polyethylenglykole (1)
- Polyethylenimin (1)
- Polymer (1)
- Polystyrolsulfonate (1)
- Potenzialhyperfläche (1)
- Power decay (1)
- Proteine (1)
- Präzisionsmassenmessung (1)
- Python (1)
- QCLAS (1)
- Quadrupole mass filter (1)
- Quantendot (1)
- Quantenkaskadenlaser (1)
- Quantenmechanik (1)
- Quantenphasenübergang (1)
- Quantenpunkt (1)
- Quantentheorie (1)
- Quantum Cascade Laser (1)
- Quecksilber (1)
- RF Plasma (1)
- RF mass Spectrometry (1)
- RF-Entladung (1)
- ROS, cell and mitochondria mechanics (1)
- Radial axis shift (1)
- Radialverteilung (1)
- Radikal (1)
- Radioactive Ion Beams (1)
- Radioaktivität (1)
- Radiofrequenz (1)
- Radionuklide (1)
- Rasterkraftmikroskop (1)
- Reaktionsdynamik (1)
- Reaktive Sauerstoffspezies (1)
- Reaktives Sputtern (1)
- Reflektometer (1)
- Reinforcement learning (1)
- Relativistische Quantenmechanik (1)
- Relaxationskinetik (1)
- Renormalization (1)
- Robust (1)
- Rohstoffgewinnung (1)
- Rotational transform (1)
- Rydberg excitons (1)
- Röntgen-Photoelektronens (1)
- Röntgenbeugung (1)
- Röntgendiffraktion (1)
- Röntgenreflektivität (1)
- S/XB coefficient (1)
- Schadstoffabbau (1)
- Schalenabschluss (1)
- Schaumflotation (1)
- Schlieren (1)
- Schnelles Teilchen (1)
- Schnittstelle (1)
- Schutzschicht (1)
- Schwerelosigkeit (1)
- Scrape-off layer width (1)
- Scraper (1)
- Secondary Electrons (1)
- Seebeck effect (1)
- Self-absorption (1)
- Self-patterning, polyelectrolyte, multilayers (1)
- Shape dynamics (1)
- Sheath transmission coefficient (1)
- Signal-to-noise ratio (1)
- Silber (1)
- Simulationsexperiment (1)
- Spectral imaging (1)
- Spectroscopy (1)
- Spin Trap (1)
- Spin Trapping (1)
- Spintronic devices (1)
- Spintronik (1)
- Spot (1)
- Sputterdeposition (1)
- Sputtering (1)
- Sputtern (1)
- Stark gekoppelte Systeme (1)
- Startverhalten (1)
- Staub (1)
- Staubdichtewelle (1)
- Staubige Plasmen (1)
- Staubiges Plasma (1)
- Stickstoff-Sauerstoff-Gemisch (1)
- Stickstoffgruppe (1)
- Stochstic Programming (1)
- Stoffwandlung (1)
- Stoß (1)
- Streutheorie (1)
- Strikeline (1)
- Strukturbildung (1)
- Sulfide (1)
- Supervised learning (1)
- Surface Collisions (1)
- Symmetrie (1)
- TDLAS (1)
- THz (1)
- TMCL (1)
- TOF (1)
- Teflon (1)
- Temperatur (1)
- Terahertz radiation (1)
- Terahertz spectroscopy (1)
- Theoretical Physics (1)
- Thermografie (1)
- Thin films (1)
- Thrombozytopenie (1)
- Ti-Cu-N coating (1)
- Time-of-flight mass spectrometry (1)
- Titan Tholins (1)
- Titan-Tholine (1)
- Titanaluminide (1)
- Titanatom (1)
- Titandioxid (1)
- Titanlegierung (1)
- Titannitrid (1)
- Tomographie (1)
- Topologischer Isolator (1)
- Tracer particles (1)
- Tracerpartikel (1)
- Transmission electron microscopy (1)
- Transport (1)
- Transporttheorie (1)
- Turbulente Strömung (1)
- UV-VIS-Spektroskopie (1)
- VUV-Strahlung (1)
- Velocity distribution (1)
- Verdampfung (1)
- Verlustprozess (1)
- Verschränkung (1)
- Verunreinigungstransport (1)
- Vielteilchensystem (1)
- Vielteilchentheorie (1)
- Viscoelastic properties (1)
- Vorionisation (1)
- WSS (1)
- Wand-Abregung-Wahrscheinlichkeit (1)
- Waves (1)
- Wellen (1)
- Wellenmagnetfeld (1)
- Wellenwechselwirkung (1)
- Wendelstein (1)
- Wendelstein 7-x (1)
- Whistlerwelle (1)
- Widerstand <Elektrotechnik> (1)
- Wolfram (1)
- Wärmeschutz (1)
- X-ray photoelectron spectroscopy (1)
- X-ray reflectivity (1)
- Zeeman and Stark effects (1)
- Zeeman- und Stark-Effekte (1)
- Zeitaufgelöste Diagnostik (1)
- Zelle (1)
- Zellmechanik (1)
- Zitterbewegung (1)
- absorption spectroscopy (1)
- actin cytoskeleton (1)
- actin quantification (1)
- adsorption (1)
- airglow (1)
- akusto-optischer Effekt (1)
- alumina (1)
- amino polymer (1)
- aminogroups (1)
- anomal transport (1)
- anomaler Transport (1)
- anti-adhesive surface (1)
- antimatter plasma (1)
- aortic arch (1)
- appearance size (1)
- atherosclerosis (1)
- atmosphere (1)
- atmospheric pressure discharge (1)
- atmospheric pressure plasma (1)
- atomic level scheme (1)
- atomic masses of cesium isotopes (1)
- atomic spectra (1)
- barrier corona (BC) (1)
- binary mixture (1)
- bipolar pulse (1)
- borosilicate (1)
- bundle formation (1)
- calcium ion signaling (1)
- cathode (1)
- cathodes (1)
- cavity QED (1)
- cavity ring-down (1)
- cell adhesion (1)
- cell membrane (1)
- cell spreading (1)
- cell-material interaction (1)
- cell‐surface contacts (1)
- charge measurement (1)
- charge-density-wave (1)
- climate (1)
- closed neutron shell (1)
- cluster (1)
- cobalt-polypyrrole (1)
- cold atmospheric pressure plasmajet (1)
- combination therapy (1)
- complex plasmas (1)
- computer vision (1)
- conductive (1)
- consistent (1)
- contact model (1)
- continuously tuning (1)
- control (1)
- copper nitride (1)
- copper release (1)
- correlation analysis (1)
- coupled phonon-plasmon modes (1)
- cross-correlation spectroscopy (1)
- crystal structure (1)
- cylindrical wave (1)
- data-mining (1)
- density limit (1)
- deposition (1)
- diagnostics (1)
- dice lattice (1)
- dielectric barrier discharge (1)
- dielectric barrier discharge (DBD) (1)
- dielectric response (1)
- dielektrisch behinderte Entladung (1)
- diffusion within multilayers (1)
- dipole magnetic field (1)
- discharge evolution (1)
- discharge mode transition (1)
- disruption (1)
- divertor (1)
- domain growth (1)
- drift waves (1)
- dust (1)
- dust charge (1)
- dust-density waves (1)
- edelmetallfreie Katalysatoren (1)
- electric field (1)
- electric propulsion (1)
- electrochemistry (1)
- electron bath (1)
- electron cyclotron emission (1)
- electron emission (1)
- electron energy loss spectroscopy (1)
- electron kinetics (1)
- electronegativity (1)
- electronic structure (1)
- electron–positron plasma (1)
- ellipsometry (1)
- energetic ion (1)
- energy-resolved ion mass spectrometry (1)
- entanglement (1)
- entropy (1)
- evaporation (1)
- external cavity diode laser (1)
- fast optical and electrical diagnostics (1)
- fdtd (1)
- finite difference in time domain (1)
- finite systems (1)
- flow dynamics (1)
- fluctuations (1)
- fluid modelling (1)
- fluid simulation (1)
- fluorescence (1)
- fluorescent lamp (1)
- fluorescent lamps (1)
- flüssig (1)
- food quality (1)
- forcing (1)
- fractals (1)
- froth flotation (1)
- ftir spectroscopy (1)
- full-wave (1)
- fusion plasma (1)
- gas cell (1)
- gas consumption (1)
- gepulster Betrieb (1)
- glow-like discharge (1)
- glow-to-arc transition (1)
- gyrokinetic (1)
- gyrokinetics (1)
- gyrokinetisch (1)
- heavy actinides (1)
- helicon, fluorescence, accelerator (1)
- helium barrier discharge (1)
- helium–oxygen barrier discharge (1)
- high performance (1)
- high power impulse magnetron sputtering (1)
- high spatial resolution (1)
- hollow cathode discharge (1)
- hot spot (1)
- human osteoblasts (1)
- hybrid method (1)
- hydrogen peroxide (1)
- ignition behavior (1)
- in situ (1)
- in-situ Diagnostik (1)
- inflammatory/immunological response (1)
- infrared spectroscopy (1)
- inhomogeneous plasma (1)
- inhomogenes plasma (1)
- instabilities (1)
- interchange (1)
- intermittency (1)
- internal energy (1)
- intramuscularly implantation (1)
- intraseasonal variation (1)
- ion accelerator (1)
- ion composition (1)
- ion drag (1)
- ion traps (1)
- ion-beam trap (1)
- ionenwind (1)
- ionosphere modeling (1)
- ipf-fd3d (1)
- iron based superconductors (1)
- iron-polypyrrole (1)
- isotherms (1)
- jet (1)
- kinetic modelling (1)
- konsistent (1)
- lamellar phase (1)
- laser atomic absorption (1)
- laser heating (1)
- laser photodesorption (1)
- layer-by-layer (1)
- leafy greens (1)
- lebensdauerabhängige Auftrittsgrößen (1)
- leitfähig (1)
- lifetime-depentend appearance size (1)
- line profile function (1)
- lipid domain growth (1)
- lipid monolayer (1)
- lipid oxidation (1)
- liquid (1)
- local-field-approximation (1)
- local-mean-energy-approximation (1)
- loss process (1)
- low-temperature plasma (1)
- low-temperature plasma polymerization (1)
- low‐temperature plasma (1)
- magic number (1)
- magische Zahlen (1)
- magnesia (1)
- magnetic characterization methods (1)
- magnetic field (1)
- magnetic materials (1)
- magnetic microscopy (1)
- magneto-hydrodynamic equilibrium (1)
- magneto-optical effects (1)
- magneto-optics (1)
- magnetron sputtering discharge (1)
- mass spectrometer (1)
- mass spectrometry (1)
- mathematical modeling (1)
- medical gas plasma technology (1)
- melamine-formaldehyde (1)
- mercury-free (1)
- metal polymer structures (1)
- metal-insulator transition (1)
- microcontact printing (1)
- microdischarge (1)
- microfluidics, cell mechanics, cells, holography, hologram, deformation, biomedicine, transfusion medicine, cytometry, viscoelasticity (1)
- microgravity research (1)
- microinstabilities (1)
- microinstabilitäten (1)
- microplasma (1)
- microwave-driven discharge (1)
- mimic scenario (1)
- mixed-valence correlations (1)
- mode dynamics (1)
- modeling (1)
- modern experimental methods (1)
- molecular ion formation (1)
- monolayer (1)
- mouse (1)
- multilayer composition (1)
- multilayers (1)
- multiterm (1)
- multiview geometry (1)
- mutlinucleon transfer (1)
- nanoparticles (1)
- nanosecond-pulsed streamer (1)
- nanowire (1)
- negative Ionen (1)
- nematicity (1)
- neoclassic (1)
- neoklassisch (1)
- networks (1)
- neural (1)
- neuron-rich calcium isotopes (1)
- neutral recycling (1)
- neutron reflectometry (1)
- neutron-rich nuclei (1)
- nicht-Hermitizität (1)
- nichtlinear (1)
- nightglow (1)
- nitrogen metastables (1)
- nitrogen-oxygen gas mixtures (1)
- non noble metal catalysts (1)
- non-Hermitian (1)
- non-equilibrium (1)
- non-thermal processing (1)
- nonlinear dynamics (1)
- nuclear mass measurements (1)
- numerische simulation (1)
- offene Quantensysteme (1)
- oncology (1)
- open quantum systems (1)
- optical diagnostics (1)
- optical emission and absorption spectroscopy (1)
- optical emission spectroscopy (1)
- optomechanics (1)
- osteoblasts (1)
- oxidation processes (1)
- pair plasma (1)
- parallel current (1)
- paramagnetic particles (1)
- partial discharge (PD) (1)
- partial mutual information (1)
- particle (1)
- particle tracking (1)
- particle transport (1)
- particle-in-cell (1)
- patterned discharge (1)
- penning trap mass spectrometer ISOLTRAP (1)
- permeation barrier (1)
- permutation (1)
- phase resolved surface charge measurement (1)
- phase separation (1)
- phonon localization (1)
- phonon propagation (1)
- photocurrent (1)
- photodetachment spectroscopy (1)
- phototdissociation (1)
- pinch (1)
- plaque characteristics (1)
- plasma applications (1)
- plasma confinement (1)
- plasma current (1)
- plasma devices (1)
- plasma diagnostic (1)
- plasma dynamics (1)
- plasma in liquids (1)
- plasma instabilities (1)
- plasma jet (1)
- plasma material processing (1)
- plasma modeling (1)
- plasma physics (1)
- plasma science and technology (1)
- plasma sheaths (1)
- plasma simulation (1)
- plasma theory (1)
- plasma-fluorocarbon-polymer (1)
- plasma-liquid-interaction (1)
- platelet biomechanics (1)
- platelet cytoskeleton (1)
- plume (1)
- pollution control (1)
- polyelectrolyte (1)
- polymer (1)
- positive Säule (1)
- positive column (1)
- positively biased anode (1)
- positron beam (1)
- precision mass measurements (1)
- pulse length dependence (1)
- pulsed laser deposition (1)
- pulsed operation (1)
- pulsed power (1)
- pump-probe spectroscopy (1)
- quantum cascade laser (1)
- quantum corrections (1)
- quantum phase transition (1)
- quasi-two-dimensional systems (1)
- quecksilberfrei (1)
- r-Prozess (1)
- radial distribution (1)
- radiation detection (1)
- radio frequency discharge (1)
- radioactive nuclei (1)
- radionuclides (1)
- reactive mode (1)
- reactive oxygen and nitrogen species (1)
- reactive oxygen species (1)
- ready-to-eat produce (1)
- real‐time deformability cytometry (1)
- remote (1)
- resistive ballooning (1)
- resonance ionization (1)
- resonant state (1)
- resonanter Zustand (1)
- retrieval (1)
- roadmap (1)
- rule changes (1)
- scanning ion conductance microscopy (1)
- scattering processes (1)
- schnelle optische und elektrische Diagnostik (1)
- scrape-off layer (1)
- secondary electron emission (1)
- secondary electron emission coefficient (1)
- secondary electrons (1)
- seed electrons (1)
- self-assembly (1)
- semi-empirical (1)
- sensitivity (1)
- separatrix (1)
- shear flow (1)
- short-lived nuclides (1)
- similarity laws (1)
- similarity scaling (1)
- simulation (1)
- simulations (1)
- single mode (1)
- skyrmions (1)
- soft matter (1)
- solar variability (1)
- solenoid separator (1)
- solid-state physics (1)
- space charge (1)
- species conversion (1)
- spin-polarized current (1)
- spot (1)
- statistical analysis (1)
- strain fields (1)
- strong correlations (1)
- superconductivity (1)
- superoxide anion (1)
- superposed epoch analysis (1)
- supported lipid bilayers (1)
- surface charge sensing (1)
- surface double layer (1)
- surface electrons (1)
- surface forces (1)
- surface physics (1)
- symmetry (1)
- teflon-like (1)
- temperatur (1)
- temperature (1)
- terahertz ellipsometry (1)
- terahertz emission spectroscopy (1)
- terahertz spintronics (1)
- terahertz time‐domain spectroscopy (1)
- terahertz transmission spectroscopy (1)
- theoretical description and modelling (1)
- thermionische Emission (1)
- thermography (1)
- thermosphere (1)
- thin film deposition (1)
- thin films (1)
- thrusters (1)
- time-correlated single photon counting (TC-SPC) (1)
- time-resolved optical emission spectroscopy (1)
- titanium (Ti) alloys (1)
- titanium surface modification (1)
- topological insulator (1)
- topological insulators (1)
- transient spark (1)
- transport (1)
- transport coefficients (1)
- tumor immunology (1)
- tunable diode laser absorption spectroscopy (1)
- tungsten (1)
- two-photon absorption laser-induced fluorescence (1)
- ultra-thin (1)
- ultradünn (1)
- ultrafast spincaloritronics (1)
- ultrafast spintronics (1)
- valleytronics (1)
- vision (1)
- voltage stabilization (1)
- wave interaction (1)
- wave magnetic field (1)
- weather forecasting (1)
- wettability (1)
- wetted area (1)
- whistler wave (1)
- xenon (1)
- zeta potential (1)
- zylindrische Welle (1)
- Überwachtes Lernen (1)
Institute
- Institut für Physik (274) (remove)
Publisher
- IOP Publishing (63)
- MDPI (13)
- Copernicus (7)
- AIP Publishing (5)
- Frontiers Media S.A. (4)
- Wiley (4)
- American Physical Society (APS) (3)
- Springer Nature (3)
- Cambridge University Press (2)
- European Geosciences Union (2)
In course of the recent results from Wendelstein 7-X, stellarators are on the brink for assessing their maturity as a fusion reactor. To this end, stellarator specific transport regimes need detailed exploration both with appropriate systematic experimental investigations and models. A way to enhance the efficiency of this process is seen in an systematic evaluation of existing experimental data. We propose appropriate tools developed in information theory for examining large datasets. Information entropy calculations, that have proven to assist the systematic assessment of datasets in many other scientific fields, are used for novelty detection.
Potentially, as a first use-case of this holistic process, this thesis attempts to link and to develop approaches to examine the stellarator specific core-electron-root-confinement (CERC) regime. The specific interest for CERC emerges from the behavior of the radial electric field. While ion-root conditions exhibit negative radial electric fields, CERC’s positive field in the very core of fusion grade plasmas adds an outward thermodynamic force to high-Z impurities and could add to potential actuators to control impurity influx as to be examined for full-metal wall operation in large stellarators. Recently, this feature received revived intent for reactor scale stellarators.
Also, in this work, parameter regions close to the transition from ion-root to CERC are
examined. At lower rotational transform (a characteristic feature of the magnetic field confining fusion grade plasmas), transitions were detected when the plasma current evolved. As in smaller stellarators, it is concluded that low-order rationals and magnetic islands are related to the transitions. This is widely supported by extensive MHD simulations which finally provide indications for the role of zonal flow oscillations. As one of the outcomes, gyrokinetic instabilities are seen interacting for the first time with the neoclassical mechanisms in experiments.
In order to cope with the vast number of highly sampled spatio-temporal plasma data, new
techniques for novelty detection are required. Fundamental prerequisites for the detailed
physics investigations were the feasibility study of entropy-based data analysis techniques, and their adaptation to detect previously unrevealed transition mechanisms. These tools were applied to multivariate bulk plasma emissivity data, which allowed the exploration of large parameter spaces and provided insights in the spatio-temporal dynamics of CERC transitions.
In this manner, this research highlights the feasibility of information flow measure analysis in fusion studies. Applications of different entropy-based complexity measures are explored and this work sheds light on the capabilities, added value and limitations of these techniques. This investigation presents the integration of information flow measures to gain deeper understanding of plasma transport phenomena, by providing an approach to fast systematic data mining suited for real-time analysis. This work paves the way for further development and implementation of information-theoretic methods for plasma data analysis.
In summary, this research highlights the gained insight on CERC transitions, while showcasing the feasibility, added values and limitations of information flow measure analysis for fusion studies, to induce theory based analysis revealing new insights in fundamental, stellarator-specific transport mechanisms.
The combination of the Layer-by-Layer (LbL) method, a nano-material such as carbon nanotubes (CNTs), and charged polyelectrolytes (PEs) is a reliable approach to produce highly functionalized surface coatings. These coatings are stable, controllable, ultra-thin, and most importantly, biocompatible. The ability to tune their properties by varying the preparation conditions and the terminating layer opens up a wide range of applications in the fields of biology and medicine. Here, the goal was to create electrically conductive coatings on which cells grow and proliferate. To achieve this goal, a coating with a stable conductive film structure, a suitable film surface topography, and suitable surface potential (and 𝜁-potential) must be prepared.
At the beginning of this thesis, the focus was on the fabrication of electrically conductive multilayer films, whose electrical properties should be stable and adjustable in a controlled manner (Article 1). The combination of chemically modified CNTs as polyanions, a strong linear polycation like poly(diallyldimethylammonium chloride) (PDADMA), and the LbL-method allowed us to prepare such films. Their characterization was carried out in air at ambient conditions. Since PDADMA is non-conductive, the charge transfer within the film and thus the electrical conductivity itself depends mainly on the CNTs and their arrangement. It was found that four CNT/PDADMA bilayers (BL) were always necessary to create a lateral network structure with multiple CNT crossing points to enable and support electron transport within the film. Moreover, additional CNT/PDADMA BL resulted in decreasing sheet resistance, while the conductivity remained constant at ≈ 4 kS/m regardless of the number of bilayers. Increasing the PDADMA molecular weight (Mw) from 44.4 kDa to 322 kDa did not affect film properties such as thickness or electrical conductivity.
However, increasing the CNT concentration from 0.15 mg/ml to 0.25 mg/ml in the deposition suspension resulted in thicker and less conductive films. This is attributed to a faster adsorption process of the CNTs leading to more adsorption sites for the polycation. We found an increased PDADMA monomer/CNT ratio compared to films prepared with the lower CNT concentration in the deposition suspension. The electrical conductivity decreased by a factor of four down to 1.1 kS/m, which can be attributed to fewer contact points between the CNTs. Overall, we were able to prepare stable and electrically conductive multilayer films. Additionally, by varying the preparation conditions tuning of the electrical conductivity is possible.
To fulfill requirements regarding i.e., medical implants, film properties not only have to be stable and controllable in a dry state (described in Article 1) but also in a biological aqueous environment. Therefore, in Article 2 we immersed our coated samples in three different solutions usually employed in biological research and compared their properties with their dry state, respectively. Also, hydration/swelling effects that normally occur for polyelectrolyte multilayer films (PEMs) in solutions were investigated.
For the film preparation, PDADMA (Mw = 322 kDa) and a deposition suspension of modified CNTs with two different concentrations (0.15 mg/ml and 0.25 mg/ml), which aged for two years, were used. Independent of the CNT suspension concentration, it turned out that the film thickness of the samples, prepared from the aged suspension, decreased significantly compared to the film thickness previously measured in Article 1. As a cross-check a new and fresh CNT suspension was made, which allowed us to reproduce the film thickness described in Article 1.
These results indicated that something happened with the CNT suspension over a two-year period. An analysis via X-ray photoelectron spectroscopy (XPS) showed a decrease in the percentage of functional groups in the CNTs from the aged suspension. The loss of functional groups resulted in less negatively charged CNTs and thus in fewer adsorption sites for the polycation PDADMA. Consequently, the PDADMA monomer/CNT ratio decreased, which lowered the thickness per bilayer by a factor of three, compared to films prepared with a freshly prepared CNT suspension. The lower linear charge density of the aged CNTs also enhanced their hydrophobicity, which is, in combination with the electrostatic forces, another important factor for multilayer cohesion. In contrast to PEMs made from polycations and polyanions, no swelling of the films occurred when immersed in solutions. This can be attributed to the fact that the increased hydrophobicity of the CNTs and the hydrophobic nature of the PDADMA backbone prevent the incorporation of water into the multilayer film. In solution, the films slightly shrink (by ≈ 2 nm), which makes them even more compact. Yet they remain stable. The result is an increased electrical conductivity from 9.6 kS/m, in the dry state, up to 15.3 kS/m immersed in solutions. To summarize, we showed that by tuning the interpolyelectrolyte forces the swelling and the ensuing decrease of the electrical conductivity of the films can be prevented.
Regarding the application in biology and medicine, we must consider that long-term exposure of cells to nano-materials like CNTs could lead to damage and inflammation of adjacent tissue. Therefore, it is necessary to prevent direct contact between the electrically conductive multilayer, i.e., CNT/PDADMA film, and the cells. The solution to this problem is a biocompatible top film that covers the CNT/PDADMA multilayer completely and still provides a lateral surface structure that supports cell adhesion and proliferation. Additional layers consisting solely of PEs could provide such a top film.
In Article 3 we investigated the self-patterning of PEM films as function of deposition steps. After preparation in water, the films were dried, characterized in air, and in vacuum. The films were built with high and low molecular weight PEs. PDADMA was used as polycation and poly(styrene sulfonate) sodium salt (PSS) as polyanion. The observation via Atomic Force Microscopy (AFM) showed that films prepared with high molecular weight PEs are laterally homogeneous and form no patterns, due to the chain immobility. The flat surfaces are ineligible as a substrate for cell adhesion.
In contrast, films built with a short PSS, especially at Mw, PSS = 10.7 kDa, began to self-pattern after seven deposited PDADMA/PSS bilayers. With each additionally deposited bilayer, the surface got more and more structured, from grooves over stripes to circular domains. Increasing film thickness led to an increased lateral mean distance between the surface structures. Scanning Electron Microscopy (SEM) images showed that exposure to a vacuum resulted in a decrease in the film thickness attributed to water removal, while the mean distance between the domains increased. Thus, by using this self-pattering process we are able to prepare PEMs with a highly structured surface. By adding PDADMA/PSS bilayers, not only the CNT/PDADMA film can be covered completely, but also a suitable surface morphology for cells can be created. Controlling the number of deposited bilayers allows the preparation of suitable coatings for cells.
To further improve the interaction of the cell and coated substrate not only the lateral structure but also the interacting electrostatic forces between cells and substrate are important for the nature of cell adhesion, function, and proliferation. In Article 4 we investigated PEMs, consisting of strong PEs with a low (PDADMA) and high (PSS) linear charge density. We performed asymmetric force measurements with the help of the colloidal probe technique (CP). Here, the forces between a PEM-covered surface and a colloidal probe (silica sphere) glued to a cantilever were investigated. The colloidal probe was either bare or covered with polycation poly(ethylenimine) (PEI). The surfaces were immersed in NaCl solutions with different ionic strengths (INaCl), starting with deionized water, then enriched up to 1 mol/L NaCl. The interaction force between a CP and the surface was measured. Thus, insight into the surface potential/charge was obtained.
During film preparation, two growth regimes (parabolic and linear) exist. These regimes and the terminating layer determine the surface force of the PEM. PEMs with a terminating PSS layer are predominantly flat and negatively charged when the ion concentration is low and the film is in the parabolic growth regime (between 1 and ≈ 15 BL). This indicates charge reversal on PSS adsorption. At the transition point between the parabolic and linear growth regimes, the ratio between polyanion and polycation monomers starts to switch and some cationic monomers are neutralized not by anionic monomers but by monovalent ions. Therefore, the surface charge density in diluted NaCl solutions changed from slightly positive near the transition to positive in the linear growth regime. At the lowest ionic strengths (INaCL) the range of the surface potential goes from – 40.5 mV (9 BL, parabolic) up to + 50 mV (19 BL, linear).
In contrast, polycation (PDADMA) terminated films are overall positive in diluted NaCl solutions. At the beginning of the parabolic growth regime, the layers are more compact and flat. However, with each additional layer deposited, the film becomes less compact and the chains begin to loosen. The now more loosely bound chains start to protrude into the solution and form pseudo-brushes. This could already be observed for 10.5 BL.
It intensifies in the linear growth regime (begin at ≈ 15 BL) and results in steric surface forces. Changing the surrounding INaCl affects this behavior and the pseudo-brushes scale as polyelectrolyte brushes.
By controlling the number of bilayers (thus the growth regime), the surrounding ionic strength, and the conformation of PEs at the PEM surface, it is possible to prepare a suitable range of surface properties i.e., for cell adhesion and proliferation. To prove that these multilayers can provide a suitable surface and have a positive effect on cell behavior, we coated in Article 5 titanium-covered samples with PEMs. Investigated was the cell interaction with the surface at different zeta(ζ) - potentials, a parameter for dynamic surface potential. Here the cell activity is measured by the mobilization of calcium (Ca2+) within the cell as a function of the ζ - potential of the substrate and the externally applied electrical potential. The cell activity indicates if the ζ - potential, provided by the sample surface, is suitable or not for the cells. The favorable interaction with the substrate is also reflected in the cell morphology and proliferation. The results showed that highly negative ζ - potentials between - 90 and - 3 mV led to a decreasing/reduced Ca2+ mobilization which correlates with reduced cell activity. Nearly neutral to moderate positive surfaces (ζ - potential + 1 to + 10 mV) i.e., PSS-terminated PEMs are able to promote cell adhesion and growth as demonstrated by an increased Ca2+ mobilization. The access to the intracellular Ca2+ stores, provided by the external stimulus, is now more effective and suggests a higher cell activity. Increasing the ζ - potentials up to ≈ + 50 mV (highly positive), i.e., PDADMA - terminated PEMs with pseudo-brushes, resulted in restricted cell viability and impaired Ca2+ mobilization, which led to a disturbed cell morphology and proliferation. In conclusion, only surfaces, terminated with i.e., PEI, with moderate positive charges (ζ - potential + 1 to + 10 mV) are able to improve the Ca2+ mobilization and thus the cell activity and proliferation. PEMs with a PSS termination provide negative 𝜁−potentials, onto which cells adhere, and proliferate. Therefore, they are a good alternative for surface functionalization for implant surfaces. In summary, the objective set at the beginning of the thesis is addressed within articles written as part of this thesis. It is possible to fabricate PEMs with modified CNTs to produce coatings that are electrically conductive with tunable sheet resistance, whether dry in air or immersed in an aqueous solution (Articles 1 and 2). Also, for pure PEMs, it is shown that with the right molecular weight of PEs and a certain number of bilayers, a suitable surface structure for cell adhesion can be produced (Article 3). Additional surface properties such as a suitable surface charge density can be provided by PEMs which can improve the cell activity as monitored with Ca2+ mobilization (Articles 4 and 5). The next step is to combine the knowledge gained from Articles 1 – 5 and link it to the application of external electrical fields to cells.
In this work, 2-dimensional measurements in the THz frequency range with self-made spintronic THz emitters were presented. The STE were used to optimize the spatial resolution and determine the magnetization in geometric shapes. At the beginning, various combinations of FM and NM layers were produced and measured to achieve an optimal composition of the STE. The layer thickness of the ferromagnetic CoFeB layer and the nonmagnetic PT layer was also varied. The investigations have shown that a layer combination of 2 nm thick CoFeB and 2 nm thick Pt, applied to a fused silica glass substrate and covered with a 300 nm thick SiO2 layer, emits the highest THz amplitude. Based on these, a structured sample, consisting of an STE and an additional layer system of 5 nm Cr and 100 nm Au, was produced. Further, three wedge-shaped structures were removed from the gold layer by an etching process so that the THz radiation generated by the STE can pass through these areas. This enables the optimization of the resolution of the system. For this purpose, the sample was moved perpendicular to the laser beam by two stepping motors with a step size of 5 μm and imaged 2-dimensionally. By reducing the step size to 0.2 μm, the beam diameter could be measured at the edge of the structure using the knife-edge method. Based on this measurement, the resolution of the system could be determined as 5.1 ± 0.5 μm at 0.5 THz, 4.9 ± 0.4 μm at 1 THz, and 5.0 ± 0.5 μm at 1.5 THz. These results are confirmed by simulations considering the propagation of THz wave packets through the SiO2. The expansion of the FWHM of the waves, passing through the 300 nm thick layer, is about 1%. Only a SiO2 layer with a thickness in the μm range occurs an expansion of around 10%. This shows that it is possible to perform 2-dimensional THz spectroscopy with a resolution in the dimension of the exciting laser beam by using near-field optics. Afterward, the achieved spatial resolution was used to investigate the influence of external magnetic fields on the STE and the emitted THz radiation. By implementing a pair of coils above the sample, an external magnetic field could be applied parallel to the pattern. The used sample was designed in such a way that only certain geometric areas on the fused silica glass substrate were coated with an STE so that THz radiation is emitted only in those areas. The 2-dimensional images show the geometric structures for f = 1.0 THz and f = 1.5 THz clearly. By applying a permanent, positive magnetic field (+M), a positive course of the THz amplitude can be seen. A rotation of the magnetic field by 180° (-M) leads to a reversal of the orientation of the emitted THz radiation, whereby the magnetic field does not influence the corresponding frequency spectrum. By using minor loops, the sample was demagnetized by the constant reduction of the magnetic field strength with alternating magnetic field direction. The 2-dimensional representation of the pattern with a step size of 10 μm shows that the sample was demagnetized since both, positively and negatively magnetized structures, could be imaged. In addition, in the 2nd row from the top, a completely demagnetized circle and a rectangle with a division into two domains can be seen. These structures have both positive and negative magnetized areas, which are separated by a domain wall. To investigate this in more detail a 2-dimensional measurement of the divided regions was made with a step size of 2.5 μm. These images confirm the division of the structures into positive and negative domains, separated by a domain wall, which was verified by Kerr-microscope measurements. Both data show a similar course of the domains and the domain wall. However, to be able to examine the domain wall more precisely using 2-dimensional THz spectroscopy, the resolution of the system must be improved to a range of a few nm, because the expected domain wall width is between 𝑙𝑊 = 12.56 nm and 𝑙𝑊 = 125.6 nm. The improved resolution would make it possible to image foreign objects, such as microplastics in biological cells or tissue. For this purpose, different plastics, such as polypropylene, polyethylene, and polystyrene, were investigated in the THz frequency range up to 4 THz. While no specific absorption could be determined for PP, characteristic absorption peaks were found for PE and PS. The energy of the photons with a frequency of about 2.2 THz excites lattice vibrations in the PE. Therefore, this frequency is specifically absorbed, and the intensity in the transmission spectrum is lower than for other frequencies. PS absorbs especially THz radiation with a frequency of 3.2 THz. In addition, all of the investigated plastics are mostly transparent for THz radiation, which makes imaging of these materials feasible. Based on these basic properties, it will be possible to image and identify these types of plastic.
Interplay of reactive oxygen species with the mechanical properties of cells and mitochondria
(2023)
Cell mechanical properties are a popular label-free method for understanding basic cellular processes. In this thesis, I used Real-time deformability cytometry (RT-DC), a high-throughput microfluidic technology, to investigate the mechanical properties of cells and mitochondria under various conditions such as increased reactive oxygen species (ROS) levels and the application of different ligand coated gold nano-particles (Au-Nps) effect on cells. Initially, we showed the possibility to measure organelles, cells, and tissue-like structures (spheroids) in a single system by constructing a virtual fluidic channel. We investigated a potential application using cytochalasin D (cyto D) treatment, which revealed increased deformation and decreased stiffness in both the normal and virtual channels. Using mechanics as a marker, I investigated the effect of excessive ROS on the mechanical properties of human myeloid precursor cells (HL60). My findings suggest that the mechanical response of HL60 cells to increased ROS levels is mediated by re-localization of microtubules toward the cell center and F-actin to the cell periphery. Interestingly, I also observed intracellular acidification, which is a largely unexplored mechanism that may have contributed to our findings. I then extended our ROS and mechanics assay to investigate cell-AuNP interactions, demonstrating that cell properties vary depending on the cell culture media and ligand coating. The results showed that dextran coated gold nano-particels (Au-Nps) had low cytotoxicity, lower ROS release, and no change in cell mechanics, indicating a potential application for dextran Au NPs. Finally, I expanded our assays to include high-throughput microfluidic characterization of isolated mitochondria. Using both exogenously and endogenously induced ROS, we found an increase in mitochondrial deformation and a decrease in their size, which could have implications on mitochondrial function, i.e., fission and fusion. We believe that advanced applications of RT-DC technology will improve the comparability of results across different sample sizes while also promoting it as a disease detection technique.
Polyelektrolyt-Multischichtfilme (PEMs) werden durch schichtweise (eng. Layer by Layer, LbL)
sequentielle Ablagerung von entgegengesetzt geladenen Polyelektrolyten auf einer
geladenen Oberfläche hergestellt. Die LbL Methode kann auf verschiedene Weise zur
Herstellung von PEM eingesetzt werden, z.B. durch Tauchen, Rotation, Sprühen oder
Beschichten mit elektromagnetischen und fluidischen Methoden. In allen Artikeln dieser
Dissertation wurde die Tauchmethode verwendet. Durch zyklische Wiederholung der
Abscheidungsschritte kann die Dicke der PEM leicht gesteuert werden. Die Oberflächen und
Grenzflächen des Films können mit der LbL Technik auch durch die elektrostatische
Wechselwirkung zwischen positiv und negativ geladenen Polyelektrolyten modifiziert werden.
Auf diese Weise lassen sich einige Eigenschaften des Films optimieren, beispielsweise
Oberflächenadhäsion und Biokompatibilität, z. B. in der Gewebezüchtung oder es kann
eine Monoschicht als Barriere an der Grenzfläche des Films adsorbiert werden, um die
Diffusion von Molekülen im Film zu begrenzen z.B. bei Aufnahme oder Freisetzen von
Medikamenten.
Daher wurde die Rolle einiger Faktoren, wie die molare Masse der Polyelektrolyte und das
Vorhandensein von Salzionen in der Präparationslösung auf die interne Struktur sowie die
Oberfläche der PEMs untersucht.
Für alle Untersuchungen dieser Dissertation wurde das häufig verwendete Modell-System aus
dem positiv geladenen Polyelektrolyten Polydimethyldiallylammonium (PDADMA), und dem
negativ geladenen Polyelektrolyten Polystyrolsulfonat (PSS), verwendet. Die Dicke der Filme
wurde mit Röntgenreflektometrie, Ellipsometrie, UV-Vis-NIR-Spektrometrie bestimmt die
interne Struktur mit Neutronenreflektometrie und die Oberflächentopografie mit Rasterkraftmikroskopie
(eng. AFM) und Rasterelektronenmikroskopie (eng. SEM).
In Artikel 1 wurde mit Hilfe der Neutronenreflektometrie die Struktur des Filmes und die
Diffusion des Polyanions PSS (DPSS) senkrecht zur PEM Oberfläche untersucht. Variiert wurde
die molare Masse des Polykations PDADMA und die Salzkonzentration der
Präparationslösung. PEMs wurden aus drei verschiedenen NaCl-Konzentrationen in der
Abscheidelösung hergestellt: 10 mmol/L, 100 mmol/L und 200 mmol/L. Die Salzkonzentration
in der Polyelektrolytlösung bestimmt die Konformation der Polyelektrolyte während der
Adsorption. Die Ketten werden weniger flach adsorbiert, wenn mehr Salzionen in der
Adsorptionslösung vorhanden sind und die Filme werden dicker.
Die Diffusion nahm mit zunehmender molarer Masse von PDADMA in Filmen, die aus 10
mmol/L, 100 mmol/L und 200 mmol/L hergestellt wurden, um mindestens drei Größenordnungen
ab, denn die Zunahme der Kettenlänge, erhöht den Vernetzungsgrad im Film. Dabei zeigten Filme aus 10 mmol/L (NaCl) mit einer niedrigen molaren Masse von PDADMA
die größte Diffusion (DPSS = 4.9 × 10−20 m2/s). Der Diffusionskoeffizient DPSS als Funktion des
Polymerisationsgrades folgt zwei Potenzgesetzen mit einem Übergang bei einem
Polymerisationsgrad von 288. Bei kürzeren Ketten stimmt der Exponent des Potenzgesetzes
gut mit dem Modell der Sticky Reptation überein. Bei längeren Ketten war der Exponent viel
größer, was vermuten lässt, dass die PSS-Ketten in einem zunehmend komplexen
Polymernetzwerk gefangen sind. Wir verstehen den Übergang als Verschränkungsgrenze für
das untersuchte System.
Bei PEMs, die aus 100 mmol/L hergestellt wurden, konnte kein Potenzgesetz festgestellt
werden. DPSS nahm sprunghaft um drei Größenordnungen ab, wenn die molare Masse von
PDADMA von 45 kDa auf 72 kDa erhöht wurde.
In Artikel 2 wurden die Oberfläche von PEMs aus Polyelektrolyten unterschiedlicher molarer
Massen untersucht. Die Oberflächenrauhigkeit und die Dicke des Films wurden mit
Röntgenreflektometrie und Ellipsometrie bestimmt. Die Oberflächentopografie wurde mit AFM
und SEM aufgenommen. Alle PEMs wurden aus PE-Lösungen mit 0,1 mol/L NaCl hergestellt.
Die Oberfläche der PEM, präpariert aus langem PSS und kurzem PDADMA oder langem PSS
und langem PDADMA, war immer flach. Bei einer Filmzusammensetzung aus langen
Polykationen (Mw (PDADMAlang) = 322 kDa) und kurzen PSS Molekülen (Mw (PSSkurz) = 10,7
kDa) wurden drei Wachstumsregime identifiziert: exponentiell, parabolisch und linear. Im
exponentiellen Wachstumsregime bildet sich nach etwa sieben Beschichtungsschritten von
PDADMA/PSS (eng. bilayers, bl) eine granulare Oberflächenstruktur aus mit einer
Oberflächenrauigkeit von 1,6 nm und einer lateralen Periodizität von 70 nm. Mit zunehmender
Schichtzahl nimmt die Oberflächenrauhigkeit sowie die laterale Periodizität zu. Im
parabolischen Wachstumsbereich aggregieren die Strukturen zu Säulen, mit einer
Oberflächenrauigkeit bis zu 23 nm und einer lateralen Periodizität bis zu 210 nm. Im linearen
Wachstumsregime sind die säulenförmigen Domänen vollständig ausgebildet und die
Oberflächenstruktur ändert sich nicht mehr. Diese Strukturen wurden schon während der
Präparation, bereits vor dem Trocknen beobachtet. Dies zeigt, dass sich die Strukturen
während der Abscheidung von PDADMA/PSS bilden.
Bei Beobachtungen im Vakuum (SEM) war im linearen Bereich die Säulenstruktur bei der
PDADMA terminierten PEM ausgeprägter als bei der PSS terminierten.
Diese Strukturen bilden sich nur im Film mit anfänglichem exponentiellem Wachstum, d.h.
wenn kurzen Ketten durch den ganzen Film diffundieren können. Das legt nahe, dass es für
die Strukturbildung nicht ausreicht, dass der Polyelektrolyt kurz ist, sondern dass es auch
beweglich sein muss. Um dies näher zu untersuchen wurde in Manuskript 1 die molare Masse des PSS variiert. Es
wurden PEMs aus langem 322 kDa PDADMA und kurzem 6,5 kDa und 3,9 kDa PSS
hergestellt und mit den Messungen von PEMs aus 10,7 kDa PSS verglichen.
Die Verkürzung von PSS hat subtile Auswirkungen auf den Filmaufbau und die
Selbststrukturierung. Für PEM aus PSS mit einer molaren Masse von 6,5 kDa konnten nur
zwei Wachstumsregime ermittelt werden: ein exponentielles und ein lineares Wachstumsregime.
Der Übergang vom exponentiellen zum linearen Wachstum erfolgte bei 28
Doppelschichten. Bei PEMs, die aus 3,9 kDa PSS hergestellt wurden, wurde bis zu 29 bl nur
ein exponentielles Wachstum beobachtet. Dies zeigt, dass eine Verringerung der molaren
Masse von PSS das exponentielle Wachstum auf eine größere Anzahl von abgeschiedenen
Doppelschichten ausdehnt. Dies ist auf die zunehmende PSS-Diffusion zurückzuführen.
In allen Filmen wurden Selbststrukturierungen beobachtet. Der Abstand und die Höhe der
säulenartigen Domänen nehmen mit jeder abgeschiedenen PDADMA/PSS-Doppelschicht
deutlich zu. Der durchschnittliche Domänenabstand ändert sich weniger und korreliert mit den
vertikalen Wachstumsregimen. Der Domänenabstand schwankt zwischen 70 nm und 750 nm.
Die größten lateralen Abstände und ein längeres exponentielles Wachstumsregime wurden
mit dem kürzesten PSS (3,9 kDa) erreicht, was auf die hohe Mobilität des PSS zurückgeführt
wird. Die Domänenhöhe ist immer kleiner als der Domänenabstand. Wenn die PEM mit
PDADMA terminiert ist, sind die Oberflächenrauhigkeit und der durchschnittliche Abstand
größer als bei PSS terminierten Filme in Wasser und nach dem Trocknen.
Darüber hinaus wurden zwischen den Domänen Filamente beobachtet. Die Filamente
bestehen aus PDADMA/PSS-Komplexen. Eine mögliche Vermutung ist, dass diese Komplexe
zwischen den Domänen diffundieren und ihren Abstand anpassen.
Die Oberflächenstruktur des Films aus PSS 10,7 kDa zeigt eine symmetrische gaußförmige
Höhenverteilung in allen drei Wachstumsregimen von 5 bis 40 bl. Für die kurze PSS war eine
solche Verteilung nur bis 15 bl (6,5 kDa) bzw. 20 bl (3,9 kDa) zu beobachten. Danach wurde
für 6,5 kDa schiefe Verteilung mit Ausläufern zu größeren Höhen beobachtet. 3,9 kDa PSS
zeigte dann sogar eine bimodale Höhenverteilung.
Die lineare Ladungsdichte von PDADMA ist etwa halb so groß wie die von PSS. Folglich
adsorbiert PDADMA in einer bürstenartigen Konformation. Wenn die oberste Schicht
PDADMA ist, dann ist das PDADMA-Molekül nicht fest an die Oberfläche gebunden. Daher ist
die durch die Oberflächenspannung erzeugte Kraft für PDADMA groß genug, um zu einer
Veränderung der Oberflächenmorphologie und folglich zu einer kleineren Gesamtoberfläche
zu führen.Außerdem sind die Domänen in 1 M NaCl-Lösung stabil, schrumpfen aber in 2 M NaCl enorm,
während ihr Abstand leicht zunimmt.
Diese Untersuchungen zeigten, dass die Mobilität des Polyelektrolyten PSS die
Voraussetzung für den Aufbau einer strukturierten Oberfläche in einem PEM-System aus
PDADMA/PSS ist. Diese Ergebnisse zeigten auch, dass die Verkürzung der Kette der PSS Moleküle
die Herstellung von Filmen erleichtert, deren Dicke und Selbststrukturierung je nach
dem gewünschten Zweck angepasst werden kann. Solche Filme können in der Medizin und
Biologie als geeignetes Substrat zur Optimierung der Adsorption von Zellen und anderen
Molekülen oder als Nanofilter effektiv eingesetzt werden.
In dieser Dissertation konnte ich zeigen, wie die Verkürzung der Kette der PSS-Moleküle zur
Bildung einer lateralen selbststrukturierten Oberfläche führt und wie die zunehmende Mobilität
der PSS-Moleküle die Oberflächenmorphologie signifikant beeinflusst.
Ion traps such as Paul traps and MR-ToF (multi-reflection time-of-flight) devices are indispensable tools at radioactive ion beam facilities for the preparation of high-quality radioactive ion beams for subsequent experiments or for precise measurements of the properties of radioactive ions, such as nuclear binding energies or nuclear charge radii.
Within the work of this thesis, Doppler- and sympathetic cooling is implemented in a linear Paul-trap cooler-buncher enabling a reduction of the longitudinal emittance of radioactive ion beams resulting in a significant improvement of the ion beam quality. Moreover, a next-generation MR-ToF device is conceptualized in order to achieve isobaric pure beams with a higher ion intensity than state-of-the-art MR-ToF devices can provide. Once fully constructed and commissioned, it will operate at an unprecedented ion beam energy of 30 keV. Both of these advances are expected to become important for a wide range of experimental programs pursued at low-energy branches of RIB facilities ranging from fundamental symmetry studies, nuclear structure, rare isotope studies with antimatter, searches of physics beyond the standard model to material science and the production of medical isotopes.
The next-generation MR-ToF mass separator is based on MIRACLS’ 30-keV MR-ToF device for highly sensitive and high-resolution collinear laser spectroscopy. By storing the ions in the Multi Ion Reflection Apparatus for Collinear Laser Spectroscopy (MIRACLS), the same ion bunch is probed by a spectroscopic laser for thousands of times compared to a single passage in traditional collinear laser spectroscopy (CLS). Dedicated simulation studies show that the accuracy and resolution will be close to traditional single-passage CLS while the sensitivity is significantly enhanced. Hence, measurements of nuclear properties via fluorescence-based CLS of very rare radionuclides as well as highly sensitive and high-precision measurements of electron affinities via laser-photodetachment-threshold spectroscopy of negatively-charged (radioactive) ions will become possible.
First measurement campaigns employing MIRACLS’ 1.5-keV MR-ToF device confirm the outstanding boost in signal sensitivity and provide confidence in the application of the MIRACLS technique for the measurement of scarcely produced radioactive ions that have been so far beyond the reach of conventional techniques. Furthermore, the electron affinity of 35Cl was measured, which is in perfect agreement with the literature value. These measurements will serve as important benchmarks for modern atomic and nuclear theory, especially in its description of nuclear charge radii.
In summary, the implementation of Doppler and sympathetic cooling at RIB facilities, the conceptualization of a 30-keV MR-ToF apparatus for highly selective and high-flux mass separation as well as for highly sensitive and high-resolution fluorescence-based laser spectroscopy and the expansion of the MIRACLS technique for the study of negatively-charged ions will enable unprecedented new measurement opportunities at RIB facilities.
Graphene is a strictly two-dimensional honeycomb lattice of carbon atoms whose low-energy charge-carrier dynamics obey the massless pseudospin-1/2 Dirac-Weyl equation (or chiral Weyl equation) where the chiral centers (or valleys) are the corners K and K‘ of the Brillouin zone. The linear spectrum near the Dirac nodal points lends graphene its exotic and ultra-relativistic properties.
However, condensed matter systems can possess fermionic excitations with linear dispersions that have no analog in high-energy physics since the crystal space group - instead of the Poincare group - constrains the energy dispersions. Perhaps the first example in this regard is the T_3 lattice (Dice Gitter), a honeycomb-like lattice with an extra atom placed at the center of each hexagon and coupled to only one of the sublattices. The spectrum features a strictly flat band that crosses the two conical intersections of the Dirac cones at K and K' inherited from graphene. The enlarged pseudospin-1 Dirac-Weyl equation describes the low-energy dynamics. By rescaling the transfer amplitude of the additional atoms in the T_3 lattice with a parameter 0<α<1, the resulting α-T_3 lattice continously interpolates between graphene and the T_3 lattice.
In this work, we explore the behavior of generalized Dirac-Weyl quasiparticles in external magnetic and valley-dependent pseudoelectromagnetic fields induced by out-of-plane strain. First, we studied Dirac-Weyl quasiparticles in external fields confined to circular quantum dots by generalizing the infinite-mass boundary condition to the α-T_3 lattices. We verified the analytically derived valley-anisotropic eigenstates of the quantum dot by numerically solving the tight-binding lattice-model in closed (isolated) and open (contacted) systems.
Second, we considered strain fields in the α-T_3 lattices to modify the low-energy transport properties by an effective pseudo-gauge field with opposite signs at the K and K‘ valley. In particular, we showed that the inhomogeneous pseudomagnetic field generated by Gaussian out-of-plane strain at the center of a four-terminal Hall bar setup acts as a valley filter. Most interestingly, the valley polarization is most dominant when incoming electrons are excited to pseudo-Landau level subbands. These bands are linked to different iso-field orbits encircling the lobes of the pseudomagnetic field. Addittionaly, any intermediate α breaks the inversion symmetry of the α-T_3 lattice and thus splits the pseudo-Landau levels into sublattice-polarized bands.
Third, we equipped the out-of-plane strain with a time-periodic drive to induce a valley-dependent pseudoelectric field perpendicular to the pseudomagnetic field. We assessed the steady-state transport properties and found – besides the static regime for small energies – two α-dependent valley-filtering regimes due to the periodic drive. Firstly, we found an additional valley-polarization plateau at the Floquet-zone boundary between the central and first Floquet copy that also displayed a “flower”-like pattern in the local density of states. Secondly, we detected a series of transmission gaps at the center of every Floquet sideband 2mΩ related to the Floquet coupling of the flat band with the central Floquet copy. Under certain strain parameters, a novel valley-filtering regime appears near the transmission gaps where the incoming K electrons are focused through the bump by the pseudoelectric field, instead of encircling the lobes of the pseudomagnetic field. A stability analysis demonstrated that the polarization regimes are tunable by the driving frequency.
Lastly, we demonstrated that the flat band in the Haldane-dice lattice modified by a uniaxial strain along the zigzag orientation remains singular at all band crossings where the model undergoes a topological phase transition between C=+-2 and C=0. To show this, we computed the compact localized eigenstates and the quantum distance of the Bloch wave function around the band-touching points. We derived the resulting non-contractible loop states and an extended state whose components are tunabe by the system parameters.
This thesis presents the production of polyanionic clusters within two ion storage devices:
Considering a Penning trap, the accessible range of polyanionic aluminium clusters has been expanded up to the 10th charge state. In particular, abundance curves for clusters with 5 to 9 excess electrons have been measured for the first time and analysed with respect to their lifetime-dependent appearance sizes. These sizes reveal a nearly quadratic dependency on the charge state for experimentally accessible lifetimes.
Additionally, the production of polyanionic clusters has been enabled in a radiofrequency ion trap. Therefore, the transition from a harmonic to a digital 2- and 3-state guiding signal has been investigated with respect to the ion storage. The passing of electrons through the trap during field-free periods of the guiding signal led to the first production of polyanionic clusters within a radiofrequency ion trap.
Research into nuclear physics has enjoyed a long and rich history since the earliest experiments began investigating atomic constituents. The discovery of the atomic nucleus in the early 20th century started a complex field of research that has undergone many transformations with the advancements of modern technology. Today, atomic nuclei are not only studied to advance our understanding of the strong force but also to gain more information on the synthesis of elements in the universe, to exploit nuclear decay to investigate the weak interaction, and to search for physics beyond the standard model.
In this work, we will study the strong force in atomic nuclei, i.e. the way nucleons (protons and neutrons) arrange themselves in a many-body system governed by the repulsive Coulomb interaction and the attractive strong interaction. In particular, we will focus on nuclear structure near nuclei with a "magic number" of Z protons and N neutrons, so-called doubly-magic nuclei, exhibiting a particularly stable configuration with respect to neighboring nuclei.
Within the nuclear shell model, similar to the atomic shells, the magic numbers indicate shell closures accompanied by energy gaps. Nuclei at double-shell closures and their direct vicinity provide an important playground to benchmark nuclear theories and models that aim to predict the intricate interplay of the nucleons that lead to enhanced nuclear binding energies, significant changes in charge radii and transition strengths, etc.
Of particular interest are nuclear isomers, long-lived excited states, in which the nucleon configuration with respect to its ground state is altered, resulting in a modification of their properties despite having the same number of protons and neutrons.
The main part of this work consists of three publications, which report on nuclear structure investigations through mass measurements and laser spectroscopy near the doubly magic nuclei nickel-78, tin-100, and lead-208.
The nuclides investigated in this work include neutron-deficient indium isotopes, neutron-rich zinc isotopes, and neutron-rich mercury isotopes.
In this thesis, I was able to provide answers to transport processes in lipid monolayers, which are ultimately, all of biological relevance. In particular, I was interested in lipid oxidation and dynamic compression/expansion processes of surfactant monolayers at the air-water interface:
Lipid oxidation was shown to be a consequence of the formation of a high concentration of reactive oxygen species (ROS) during cell respiration, which finally can lead to severe cell damage. It is not yet understood clearly, which part of the lipid molecules is especially prone to a ROS attack. I was particularly interested in the role of the double bonds of the acyl chains of the lipid molecules during oxidation. Further, I wanted to know the time scales of lipid interaction with the ROS.
Compared to lipid vesicles, lipid monolayers have the advantage that many parameters of the system can be adjusted easily. In our system, I made use of this by setting the lateral pressure to low values during H2O2 treatment, which facilitated the ROS to reach the double bonds in the acyl chains.
A prime example of biological systems out of thermal equilibrium was given in the alveolus surface, which is covered with a surfactant monolayer. During breathing, these monolayers undergo such a highly dynamic compression and expansion. Arising flows from breathing could disrupt a film and consequently, it would lose its protective role. One of my goals was to understand flows and their influence on domain shape. Dependent on the strength of the flows, I expected different growth regimes, with differing prevailing transport processes. Once understanding the underlying mechanisms in domain shaping would allow me to draw conclusions on biological systems.
In order to address these questions, I established two systems, both based on the compression of lipid monolayers. I used isotherms to study the phase behavior of the lipids:9 During compression, the lipids can undergo phase transitions from the gaseous phase to the liquid expanded phase (LE-phase) and further from the LE-phase to the liquid condensed phase (LC-phase). A coexistence regime is observed in between the LE-phase and the LC-phase, characterized by a flat increase of lateral pressure with decreasing molecular area. Some lipids exhibited LC-phase domains. These were further investigated with Brewster angle microscopy (BAM). The used BAM was equipped with an integrated Scheimpflug optics, enabling an overall focused image plane. Furthermore, time-resolved observation of the growth of the domains was possible by recording videos (20 frames per seconds).
The first system enabled the investigation of lipid peroxidation, when the lipids were exposed to ROS. I chose DMPC, POPC, DOPC and PLPC, since these are phospholipids differing in the number and position of double bonds in acyl chains, but not in the head group. I used a H2O2 enriched phosphate buffered saline (PBS) solution, which served as a precursor for more reactive ROS, like hydroxyls (.OH). PBS was chosen, since it resembles the cell environment best. During defined waiting times of H2O2 treatment, the ROS diffused vertically from the subphase towards the monolayer. The lipid molecules were in the LE-phase, which facilitated the ROS molecules to reach also the double bonds of the acyl chains. The oxidized monolayers were then compressed at constant compression speed. Since the corresponding isotherms could be measured with high precision, the relative area increase δA/A between oxidized and non-oxidized monolayer along the isotherm proved to be a good measure for lipid peroxidation. The area increase δA in the molecular area of the oxidized molecules was explained by the eventually added, more hydrophilic −OOH group at the position of a carbon atom adjacent to a double bond in the unsaturated acyl chain. The −OOH group is drawn to the hydrophilic head group of the lipid. This leads to a kink in the acyl chain, which increases the molecular area A by δA. A model, which explained this peroxidation process in lipid vesicles, could be adopted to monolayers.
I compared the oxidation of phospholipids, differing in the number and position of the double bonds of their acyl chains. I found that δA/A increased with the growing number of double bonds in one acyl chain. However, a comparison of DOPC with POPC also showed the importance of the position of the acyl chain. I determined a slow reaction kinetic. It could be estimated by a √t dependence of the number density N_surface, which denominates the ROS sticking on the monolayer. The transport of ROS towards the monolayer was found to be diffusive, because it was the slowest process in the reaction. This interpretation was reinforced by a comparison of the temperature dependence of the relative area increase δA/A with the Stokes-Einstein diffusion coefficient of water molecules. The initial ROS concentration c_0 in the trough could be traced back (c_0~ 50 nM), which is indeed a realistic value found in human cells.
Concluding, our results can be understood as a feasibility study. The complexity of the monolayer can be arbitrarily increased, for example by the addition of proteins, allowing the investigation of other oxidative processes occurring in the cell membrane.
The second system allowed the investigation of growth of LC domains during fast compression processes of monolayers. I chose erucic acid monolayers, due to its low line tension and a continuous nucleation phase, enabling the formation of fractal domains. The monolayers were investigated with isotherms and BAM videos. Since v_C (compression speed of the monolayer) was continuous over the whole compression time, I had a system with well-defined hydrodynamic conditions. This allowed me a complete analysis of the system, starting with descriptive features of the observed domains to a classification of the observed growth regimes by means of hydrodynamic theory, through to the distinction and quantification of different kind of flows and supersaturations, involving Ivantsov theory:
Dependent on the compression speed v_C, I observed seaweed or dendritic domains. The LE/LC phase transition pressure pi_t was slightly increased compared to pi_inf of the equilibrium isotherm. A high compression speed v_C induced a supersaturation Δc. I introduced the excess lateral pressure Δpi=pi-pi_inf as an appropriate quantity to describe the supersaturation Δc. I showed a linear behavior of Δc on Δpi. Δc is a macroscopic quantity since it is averaged over the whole monolayer area. I characterized the domains of the seaweed and dendritic regime with respect to tip radii, branch lengths, side branch separations and fractal dimensions. I calculated the growth speed of the main branches. A roughly doubling of the growth speed of dendritic domains, compared to seaweed domains was observed. This was an evidence of adjunctive (Marangoni) flow in the subphase.
For each monolayer, I observed drifts during domain growth, which I explained by an anisotropy in the LE-phase, caused by the continuous nucleation of the domains. These kind of surface flows were superimposed to bulk flows in the subphase. Since I had a well established system, I could analyze the influence of these surface flows on domain shape, in terms of magnitude, direction and duration of the surface flows. I therefore used FFT spectra and directionality histograms. At low flows, the FFT showed six-fold symmetry. Higher drifts exhibited incisions in the FFT, eventually leading to dumbbell shaped FFTs at very high drifts. The domains grew preferentially in the direction parallel to the incision.
I used directionality histograms to analyze the angular distribution of the growing domains. They showed that the drift direction always correlated with a minimum in the histogram. In order to analyze drift duration, I split the domain in downstream and upstream side. I could show that for small drift durations, downstream growth was preferred. However, for longer drift durations, the flows got more isotropic and consequently growth was more balanced then.
I could observe only a weak correlation between drift velocity v_D and compression speed v_C. However, dendrites were formed when the compression speed v_C was high, while seaweed domains were formed when v_C was small. Domain distortion occurred in the same way, independent if seaweed or dendritic domains were considered. I further showed that hydrodynamic flows in the subphase and surface flows are superimposed and scale differently. Consequently, they have different impact on domain shape: hydrodynamic flows act on μm scale and influence the domain morphology (distance between side branches, and tip radius) and the growth speed of the main branches. Surface flows act on the mm to cm scale, cause an anisotropic flow in the LE phase surrounding the domain, and thus affect the overall domain shape.
The anisotropy in the LE-phase led to a locally different degree of supersaturation. To take this into account, I introduced a local normalized supersaturation Δ, based on the Ivantsov solution. Therefore, I calculated Péclet numbers p of measured quantities of the system. I obtained values of 0.88 ≤Δ≤0.90 for the seaweed regime (p<5) and 0.93 ≤Δ≤0.96 for the dendritic regime (p>6). Since the Ivantsov solution can only be applied for purely diffusive processes, I applied a modified Ivantsov solution Δ_mod, which calculates Δ at a distance 𝛿 ahead of the dendrite tip. I was able to determine the progression of the diffusive layer 𝛿, however a quantitative determination failed.
Applying hydrodynamic theory allowed me to classify the two growth regimes with respect to the Boussinesq number Bq. Since for both growth regimes, I achieved values of Bq<1, bulk viscous losses dominated over surface viscous losses. Further, a cross-over length 𝜉 was calculated, from which one can distinguish, whether advective transport dominates over diffusion.
I further connected the two defined supersaturations Δ and Δc via the excess lateral pressure Δpi. From this, I saw differences in the seaweed and dendritic growth regimes: The local normalized supersaturation Δ of seaweed growth seemed to be quite stable for a further increase of the lateral excess pressure Δpi, whereas it reacted quite sensitive in the dendritic regime. This was found to be an indication of a non-equilibrium regime, caused by the strong coupling of the monolayer to the subphase. It reinforces therefore the theory of Marangoni-flow.
The findings of this thesis emphasize the importance of understanding highly dynamic compression/expansion processes arising in surfactant monolayers. Using the example of the compression of the alveolus surface, it can be seen that a more realistic model of the pulmonary alveolus is not only enabled by increasing the complexity of the surfactant monolayer (e.g. by adding specific proteins or lipid mixtures to the monolayer). Equally important is the understanding in transport processes and the consequences for the monolayer structure. By the analysis of domain shapes, I presented a method, which is suitable for such a study.
In future fusion reactors disruptions must be avoided at all costs. Disruptions due to the density limit (DL) are typically described by the power-independent Greenwald scaling. Recently, a power dependence of the disruptive DL was predicted by several authors (Zanca et al 2019 Nucl. Fusion 59 126011; Giacomin et al 2022 Phys. Rev. Lett. 128 185003; Singh and Diamond 2022 Plasma Phys. Control. Fusion 64 084004; Stroth et al 2022 Nucl. Fusion 62 076008; Brown and Goldston 2021 Nucl. Mater. Energy 27 101002). It is investigated whether this increases the operational range of the tokamak. Increasing the heating power in the L-mode can induce an L-H transition, and therefore a power-dependent DL and the L-H transition cannot be considered independently. The different models are tested on a data base for separatrix parameters at the separatrix of ASDEX Upgrade and compared with the concept (SepOS) presented in Eich and Manz (2021 Nucl. Fusion 61 086017). The disruptive separatrix density scales with the power ne ∝ P0.38±0.08 in good agreement to all models. Also the back transition from high to low (H-L) confinement shows an approximately Greenwald scaling with an additional power dependence ne ∝ P0.4 according to the SepOS concept. For future devices operating at much higher heating power such a power scaling may allow operation at much higher separatrix densities than are common in H-mode operation. Preconditions to extrapolation for future devices are discussed.
The controlled formation and adjustment of size and density of magnetic skyrmions in Ta/CoFeB/MgO trilayers with low Dzyaloshinskii–Moriya interaction is demonstrated. Close to the out-of-plane to in-plane magnetic spin reorientation transition, we find that small energy contributions enable skyrmion formation in a narrow window of 20 pm in CoFeB thickness. Zero-field stable skyrmions are established with proper magnetic field initialization within a 10 pm CoFeB thickness range. Using magneto-optical imaging with quantitative image processing, variations in skyrmion distribution and diameter are analyzed quantitatively, the latter for sizes well below the optical resolution limit. We demonstrate the controlled merging of individual skyrmions. The overall demonstrated degree of comprehension of skyrmion control aids to the development of envisioned skyrmion based magnetic memory devices.
Properties of self-excited dust acoustic waves under the influence of active compression of the dust particle system were experimentally studied in the laboratory and under microgravity conditions (parabolic flight). Ground based laboratory experiments clearly show that wave properties can be manipulated by changing the discharge volume, its aspect ratio, and thus the dust particle density. Complementary experiments under microgravity conditions, performed to exclude the effects of gravity inflicted sedimentation and anisotropic behavior, were less conclusive due to residual fluctuations in the planes acceleration indicating the need for a better microgravity environment. A theoretical model, using plasma parameters obtained from particle-in-cell simulations as input, supports the experimental findings. It shows that the waves can be described as a new observation of the dust acoustic mode, which demonstrates their generic character.
The pulse length dependence of a reactive high power impulse magnetron sputtering (HiPIMS) discharge with a tungsten cathode in an argon+oxygen gas mixture gas was investigated. The HiPIMS discharge is operated with a variable pulse length of 20–500 µs. Discharge current measurements, optical emission spectroscopy of neutral Ar, O, and W lines, and energy-resolved ion mass spectrometry are employed. A pronounced dependence of the discharge current on pulse length is noted while the initial discharge voltage is maintained constant. Energy-resolved mass spectrometry shows that the oxygen-to-tungsten (O+/W+) and the tungsten oxide-to-tungsten (WO+/W+) ion ratio decreases with pulse length due to target cleaning. Simulation results employing the SDTrimSP program show the formation of a non-stoichiometric sub-surface compound layer of oxygen which depends on the impinging ion composition and thus on the pulse length.
Recent experimental campaigns in the Wendelstein 7-X stellarator, a
plasma-confining device designed to investigate the Magnetic Confinement Fusion
(MCF) approach to generating electrical power, have shown that the injection of
fuelling pellets had an unexpected and considerable impact on the performance of
the plasma. Rather than simply refuelling the device and `diluting' the plasma
energy, pellet injection is followed by a significant increase in the ratio of
the ion temperature to the electron temperature. It has been suggested that this
is not merely due to the improved confinement following the reduction of
turbulent transport after the pellet material has homogenised with the bulk
plasma, but also due to a direct transfer of energy from electrons to ions. The
proposed mechanism for this energy transfer is the ambipolar expansion of the
pellet plasmoid, the localised plasma structure produced by the
ionisation of ablated pellet material, along magnetic field lines.
Early work on pellet plasmoid expansion predicted that half the heating power
deposited in plasmoid electrons by collisions with hot ambient electrons is
transferred to plasmoid ions in the form of flow velocity as the plasmoid
expands. The complicated nature of the system of the pellet plasmoid embedded in
the ambient plasma, particularly the behaviour of electrons, which experience
many collisional and collisionless phenomena on multiple disparate timescales,
means that early models of the expansion were not wholly self-consistent, but
rather made use of strong approximations that apply in some regions of the
plasmoid but not in others. For example, only electrons and ions associated with
the plasmoid were rigorously treated, meaning that the framework was one of
`expansion into vacuum'. Combined with the assumption of Maxwellian electrons,
this led to an electric potential that was unbounded at infinity. Naturally, the
validity of the conclusions of such a model are called into question because the
approximations lose their validity far from the plasmoid and as time advances,
yet predictions about the final state of the plasma are desired. A deeper
investigation is required: careful consideration of the phenomena in question
and the timescales (and lengthscales) on which they act must be made in order to
rigorously construct a model that is valid throughout the entire expansion.
The first two papers presented in this thesis iterate on the model established
in the paper that first predicted the electron-to-ion energy transfer; their aim
was to find out how the character of the expansion changes with a more
sophisticated and accurate description of various phenomena, while remaining
within the existing framework of expansion into vacuum. Ultimately, we find that
the qualitative character is unchanged, and that approximately half the heating
power deposited in plasmoid electrons is transferred to ions.
Two other papers in this thesis address the limitations of the original model.
This is achieved by properly considering the electron kinetic problem in a
plasmoid. One paper considers the electron kinetic problem when electrons are
highly isotropised. In this case the kinetic equation can be integrated to
remove all but two independent variables, which is the maximum possible
reduction considering it is a time-dependent problem. The full nonlinear
integro-differential Landau self-collision operator is integrated exactly and
few approximations are made, leading to a rather general kinetic equation.
However, for fuelling pellets some anisotropy in the electron distribution is
expected. Another paper considers the electron kinetic problem (and the entire
plasmoid expansion) allowing for electron anisotropy. Careful consideration of
the ordering of timescales of electron phenomena in a pellet plasmoid leads to a
steady-state kinetic problem that we call collisional quasi-equilibrium (QE). QE
appears in many ways similar to the collisional steady-state characterising a
true thermal equilibrium. It was found that the time-dependent kinetic problem
of the earlier paper, with isotropic electrons, produces the QE distribution
function, corroborating the existence of the QE state. We then take moments of
the electron kinetic equation that is valid on the expansion timescale, assuming
that the electron distribution is that given as the solution to the QE kinetic
problem. This is completely analogous to what is done to obtain the Braginskii
equations or any Chapman-Enskog theory. The result is a set of equations for the
long-term evolution of the macroscopic quantities that describe the distribution
function existing in a quasi-steady-state at each point in time. It is from this
point that one may feasibly describe the plasmoid expansion with an accurate
picture of the electron kinetics and finally obtain the electron-to-ion energy
transfer so desired in a rigorous model of the expansion.
From a broader point of view, the two frameworks provided by these rigorous
investigations of the electron kinetic problem serve as a basis for the future
study of plasmoids. Such a `first-principles' approach to plasmoid dynamics is
novel and interesting in its own right, but it will be demonstrated that such an
approach is essential for pellet plasmoids owing to the fact that they are
poorly described by the `standard tools' of plasma physics.
Using the QE framework it was found that, once more, about half the heating
power experienced by plasmoid electrons is transferred to plasmoid ions. The
incredible robustness of the prediction of such an energy transfer is, in the
author's opinion, the result of the self-similar nature of the expansion found
as a solution to the original model. As a rule, the profiles of self-similar
solutions tend to be attractors for the `real', more complicated, system, and
the qualitative predictions involving no parameters, of which the
electron-to-ion energy transfer is one, tend to be very sturdy.
Aside from fuelling pellets, composed of hydrogen or deuterium, one paper in
this thesis investigates the physics of high-Z pellets that are designed to
terminate the plasma safely in the event of a `disruption', where much of the
magnetic field energy is channelled into a runaway electron beam with
potentially disastrous consequences if the beam encounters a plasma-facing
component. The paper draws on the work carried out in the paper concerning the
kinetic problem of isotropised electrons in a plasmoid.
This thesis is `cumulative'; the vast majority of the work carried out is
described within a set of Papers, labelled A-E, placed at the back of the text.
There is a preceding `wrapper text' (given in numbered Sections) tasked with
introducing the reader to the topic, guiding the reader through the papers, and
expounding some of their main results. Some amount of material not present in
the papers is also provided in the wrapper text. Naturally, the wrapper text
mainly focusses on the results of the papers which are under my first
authorship. In the course of publishing papers over an extended period of time
the nomenclature is bound to vary. Although it is mostly consistent between the
papers, a few difference do arise, and the section `Common symbols and
subscripts' is provided in the frontmatter to alleviate confusion. Particular
care should be taken with the symbols x and z; both can refer to the
coordinate parallel to the magnetic field line, but in papers where z is used
for this purpose x tends to have another definition. In the wrapper text the
choice of symbols is generally chosen to reflect those in the corresponding
paper.
The stratospheric aerosol layer plays an important role in the radiative balance of Earth primarily through scattering of solar radiation. The magnitude of this effect depends critically on the size distribution of the aerosol. The aerosol layer is in large part fed by volcanic eruptions strong enough to inject gaseous sulfur species into the stratosphere. The evolution of the stratospheric aerosol size after volcanic eruptions is currently one of the biggest uncertainties in stratospheric aerosol science. We retrieved aerosol particle size information from satellite solar occultation measurements from the Stratospheric Aerosol and Gas Experiment III mounted on the International Space Station (SAGE III/ISS) using a robust spectral method. We show that, surprisingly, some volcanic eruptions can lead to a decrease in average aerosol size, like the 2018 Ambae and the 2021 La Soufrière eruptions. In 2019 an intriguing contrast is observed, where the Raikoke eruption (48∘ N, 153∘ E) in 2019 led to the more expected stratospheric aerosol size increase, while the Ulawun eruptions (5∘ S, 151∘ E), which followed shortly after, again resulted in a reduction in the values of the median radius and absolute distribution width in the lowermost stratosphere. In addition, the Raikoke and Ulawun eruptions were simulated with the aerosol climate model MAECHAM5-HAM. In these model runs, the evolution of the extinction coefficient as well as of the effective radius could be reproduced well for the first 3 months of volcanic activity. However, the long lifetime of the very small aerosol sizes of many months observed in the satellite retrieval data could not be reproduced.
Explosive volcanic eruptions emitting large amounts of sulfur can alter the temperature of the lower stratosphere and change the circulation of the middle atmosphere. The dynamical response of the stratosphere to strong volcanic eruptions has been the subject of numerous studies. The impact of volcanic eruptions on the mesosphere is less well understood because of a lack of large eruptions in the satellite era and only sparse observations before that period. Nevertheless, some measurements indicated an increase in mesospheric mid-latitude temperatures after the 1991 Pinatubo eruption. The aim of this study is to uncover potential dynamical mechanisms that may lead to such a mesospheric temperature response. We use the Upper-Atmospheric ICOsahedral Non-hydrostatic (UA-ICON) model to simulate the atmospheric response to an idealized strong volcanic injection of 20 Tg S into the stratosphere (about twice as much as the eminent 1991 Pinatubo eruption). Two experiments with differently parameterized effects of sub-grid-scale orography are compared to test the impact of different atmospheric background states. The simulations show a significant warming of the polar summer mesopause of up to 15–21 K in the first November after the eruption. We argue that this is mainly due to intrahemispheric dynamical coupling in the summer hemisphere and is potentially enhanced by interhemispheric coupling with the winter stratosphere. This study focuses on the first austral summer after the eruption because mesospheric temperature anomalies are especially relevant for the properties of noctilucent clouds, whose season peaks around January in the Southern Hemisphere.
The influence of the Madden–Julian oscillation (MJO) on the middle atmosphere (MA) and particularly on MA temperature is of interest for both the understanding of MJO-induced teleconnections and research on the variability of the MA. We analyze statistically the connection of the MJO and the MA zonal mean temperature based on observations by the Microwave Limb Sounder (MLS) satellite instrument. We consider all eight MJO phases, different seasons and the state of the quasi-biennial oscillation (QBO). We show that MA temperature anomalies are significantly related to the MJO and its temporal development. The MJO signal in the zonal mean MA temperature is characterized by a particular spatial pattern in the MA, which we link to the interhemispheric coupling (IHC) mechanism, as a major outcome of this study. The signal with the largest magnitude is found in the polar MA during boreal winter with temperature deviations on the order of ±10 K when the QBO at 50 hPa is in its easterly phase. Other atmospheric conditions and locations also exhibit temperature signals, which are, however, weaker or noisier. We also analyze the change in the temperature signal while the MJO progresses from one phase to the next. We find a gradual altitude shift in parts of the IHC pattern, which can be seen more or less clearly depending on the atmospheric conditions.
The statistical link between the MJO and the MA temperature highlights illustratively the far-reaching connections across different atmospheric layers and geographical regions in the atmosphere. Additionally, it highlights close linkages of known dynamical features of the atmosphere, particularly the MJO, the IHC, the QBO and sudden stratospheric warmings (SSWs). Because of the wide coverage of atmospheric regions and included dynamical features, the results might help to further constrain the underlying dynamical mechanisms and could be used as a benchmark for the representation of atmospheric couplings on the intraseasonal timescale in atmospheric models.
The multi-cell Penning–Malmberg trap concept has been proposed as a way to accumulate and confine unprecedented numbers of antiparticles, an attractive but challenging goal. We report on the commissioning and first results (using electron plasmas) of the World's second prototype of such a trap, which builds and improves on the findings of its predecessor. Reliable alignment of both ‘master’ and ‘storage’ cells with the axial magnetic field has enabled confinement of plasmas, without use of the ‘rotating wall’ (RW) compression technique, for over an hour in the master cell and tens of seconds in the storage cells. In the master cell, attachment to background neutrals is found to be the main source of charge loss, with an overall charge-confinement time of 8.6 h. Transfer to on-axis and off-axis storage cells has been demonstrated, with an off-axis transfer rate of 50% of the initial particles, and confinement times in the storage cells in the tens of seconds (again, without RW compression). This, in turn, has enabled the first simultaneous plasma confinement in two off-axis cells, a milestone for the multi-cell trap concept.
The combination of a linear quadrupole ion-filter and linear Paul trap operated with a rectangular guiding field for the filtering and accumulation of ions within the Mass Spectrometry for Single Particle Imaging of Dipole Oriented protein Complexes (MS SPIDOC) prototype [T. Kierspel et al., Anal. Bioanal. Chem., published online] is characterized. Using cationic caesium-iodide clusters, the ion-separation performance, ion accumulation, cooling, and ejection via in-trap pin electrodes is evaluated. Furthermore, proof-of-principle measurements are performed with 64 kDa multiply-charged non-covalent protein complexes of human hemoglobin and 804 kDa non-covalent complex of GroEL, to demonstrate that the module meets the criteria to handle high-mass ions which are the main objective of the MS SPIDOC project. The setup's performance is found to be in line with previous results from ion-trajectory simulations [F. Simke et al., Int. J. Mass Spectrom.473 (2022) 116779].
Cationic and anionic clusters of the group-14 elements carbon, silicon, germanium, tin, and lead are produced by high-vacuum laser ablation and studied with a multi-reflection time-of-flight mass spectrometer. In-trap photodissociation is performed for cluster species in the size range n=2–10. The clusters’ production rates as well as their dissociation pathways are used to probe the nonmetal–metal transition throughout the group. Carbon clusters show neutral-trimer break-off, while those of the other elements evaporate neutral monomers and, in some cases, form specific charged fragment sizes.
This work investigates turbulence in the core plasma of the optimised stellarator
Wendelstein 7-X. It focuses on experimental characterisation and
evaluation of the electrostatic micro-instabilities, which drive turbulent fluctuations,
and the saturation of turbulence by zonal flows. Expectations for
Wendelstein 7-X are formulated by reviewing theoretical work and with
the help of gyrokinetic simulations. The experimental analysis centres on
line-integrated density fluctuation measurements with the phase contrast
imagining diagnostic in electron cyclotron heated hydrogen discharges. An
absolute amplitude calibration was implemented, and a method for reliable
determination of dominant phase velocities in wavenumber-frequency
spectra of density fluctuations has been developed. Line-averaged density
fluctuation levels are observed to vary between magnetic configurations.
The wavenumber spectra exhibit a dual cascade structure, indicating fully
developed turbulence. The dominant instability driving turbulent density
fluctuations on transport relevant scales is identified as ion-temperaturegradient-
driven modes, which are mainly localised in the edge region of the
confined plasma. Despite the line-integrated nature of the measurement, the
localisation of density fluctuations is shown by comparing their dominant
phase velocity with the radial profile of the E × B rotation velocity due to
the ambipolar neoclassical electric field. Nonlinear gyrokinetic simulations
and a simplified plasma rotation model within a synthetic diagnostic confirm
the localisation. Oscillations of the dominant phase velocity indicate
the existence of zonal flows as a saturation mechanism of ion-temperaturegradient-
driven turbulence. A direct effect on turbulent density fluctuation
amplitudes and radial transport is observed.
The layer-by-layer method is a robust way of surface functionalization using a wide range of materials, e.g. synthetic and natural polyelectrolytes (PEs), proteins and nanoparticles. Thus, this method yields films with applications in diverse areas including biology and medicine. Sequential adsorption of different oppositely charged macromolecules can be used to prepare tailored films with controlled molecular organization. In biomedical research, electrically conductive coatings are of interest. In manuscript 1, we investigated films sequentially assembled from the polycation poly (diallyldimethyl-ammonium) (PDADMA) and modified carbon nanotubes (CNTs), with CNTs serving as the electrically conductive material. We assume that charge transport occurs through CNT contacts. We showed that with more than four CNT/PDADMA bilayers, the electrical conductivity is constant and independent of the number of CNT/PDADMA bilayers. A conductivity up to 4∙10^3 S/m was found. It is possible to control the conductivity with the CNT concentration of the CNT deposition suspension. A higher CNT concentration resulted in thicker CNT/PDADMA bilayers, but in a lower conductivity per bilayer. We suspect that an increased CNT concentration leads to a rapid CNT adsorption without the possibility to rearrange themselves. If PDADMA then adsorbs on the disordered CNTs in the next deposition step, the average thickness of the polymer layer is thicker than on the more ordered CNT layer from the dilute solution. This leads to an increased PE monomer/CNT ratio and lower conductivity. More polycations between the CNT layers leads to less CNT contacts. Thus, the controlled composition of films can be used to fulfill specific requirements.
For many applications of polyelectrolyte multilayers (PEMs), cheap PEs with a broad distribution of molecular weights are used. It was unknown whether the distribution of molecular weights of the PE in the adsorption solution is maintained during the adsorption process and hence in the film. To investigate this, the PSS adsorption solution in article 2 consisted of a binary mixture of short and long poly (styrene sulfonate) (PSS). A good model system to study layered films in terms of composition are PDADMA/PSS multilayers. Neutron reflectivity and in-situ ellipsometry measurements were carried out to determine the PSS composition in the film and the growth regimes. At a mole fraction of long PSS of 5 % or more in solution, the exponential growth (which is characteristic of short PSS) is totally suppressed, and only long PSS is deposited in the resulting multilayer. Variation of adsorption time of PSS showed that short PSS first adsorbs to the surface but is displaced by long PSS. Between 0 and 5 % of long PSS in the adsorption solution exponential growth occurs. The fraction of short PSS in the film continuously decreases with the increase of long PSS in the adsorption solution. In the assembly of films prepared from binary PSS mixtures, the short PSS leaves the film through adsorption/desorption steps both during PSS adsorption and during PDADMA adsorption (as PDADMA/PSS complexes). Both techniques show that the composition of the film does not correspond to that of the deposition solution. The composition and thus the properties of the resulting multilayer are influenced by the choice of adsorption time. Moreover, we conclude that a multilayer grown from a polydisperse polyelectrolyte contains fewer mobile low molecular weight polymers than the deposition solution.
In manuscript 1 and article 2, the composition of multilayers was studied. In manuscript 1 adsorption kinetics were important for the arrangement of CNTs on the surface. In article 2, the adsorption kinetics, i.e. the diffusion of the polyelectrolytes to the surface, was also investigated. In article 3, we investigated the influence of the composition of the film as well as the preparation condition on the mobility of PEs in the film. The molecular weight of the polycation PDADMA and the NaCl concentration of the deposition solution were varied. The vertical PSS diffusion constant D_PSS within the PDADMA/PSS multilayers was measured using neutron reflectivity. The salt concentration of the preparation solution defines the polymer conformation during deposition. The molecular weight of the polycation determines the degree of intertwining. Together, both parameters determine the polyanion-polycation coupling and thus the PSS mobility within the network. Log−log display of D_PSS vs the molecular weight of PDADMA and fits to two power laws (D_PSS ∝ X_n(PDADMA)^(-m) ∝ M_w(PDADMA)^(-m)) reveals for films built from 10 or 200 mM NaCl a kink. Below and above the kink, the dependence of D_PSS on M_w(PDADMA) can be described by different power laws. For Χ_n(PDADMA) < X_n,kink(PDADMA) ≈ 288, the exponents are consistent with the predictions of the sticky reptation model. X_n(PDADMA) ≈ 288 is the entanglement limit. For Χ_n(PDADMA) > X_n,kink(PDADMA) ≈ 288, the decrease of D_PSS with M_w(PDADMA) is larger than below the entanglement limit, which is indicative of sticky reptation and entanglement. The PSS diffusion constant of films built from 100 mM NaCl drops three orders of magnitude when increasing the molecular weight of PDADMA from 45 kDa to 72 kDa. To figure out if an immobile PSS fraction exists in the film built from 72 kDa PDADMA (beyond the entanglement limit), the film was annealed at different conditions in article 4: both temperature and salt concentration were varied. For data analysis, the simplest model with two PSS fractions with different diffusion constants was used. These diffusion constants increase as the temperature of the surrounding solution is increased. As assumed in article 3, an immobile PSS fraction exists when annealing at room temperature. At higher annealing temperatures, at least two diffusion processes must be distinguished: the diffusion of the highly mobile PSS fraction through the entire film and a slow PSS fraction, mowing in a limited way. The choice of preparation conditions determines whether a polyelectrolyte multilayer can intermix completely. It is not clear if complete intermixing will ever occur for films built with PDADMA beyond the entanglement limit. It is possible that the diffusion is more complex. Long-term measurements will clarify this question. Calculating scattering length density profiles with subdiffusive behavior would be interesting and is a challenge for the future. Furthermore, immobile fractions are only visible with long annealing times. We hypothesize that an immobile or nearly immobile fraction is present whenever the dependence of D_PSS on the molecular weight of PDADMA cannot be described by the sticky reptation. To verify this hypothesis, further studies are necessary.
All results presented and discussed in the manuscript and articles show that by varying the preparation conditions, tailored films can be built. The composition of the film is also determined by the adsorption kinetics. In addition, the mobility of the PEs within the multilayers can be controlled by varying the conformation, mingling and entanglement of the chains within the film. The influence of the salt concentration in the preparation solution on the growth regimes during film formation is part of our future research. It is planned to investigate films built of different PDADMA molecular weights under varied annealing conditions to better understand the mobile and immobile fractions.
Kinetic modeling and infrared spectroscopy of charge carriers across the plasma-wall interface
(2022)
In this thesis, charge transport at the plasma-wall interface is investigated theoretically, on a semiclassical, microscopic level. Based on the Boltzmann and Poisson equations a set of equations is derived and numerically solved to model charge carriers both within a semiconducting wall and a gaseous plasma in front of it. While the plasma is considered collision-free, within the solid, phonon collisions, as well as recombination processes between conduction band electrons and valence band holes are considered. This results, for the first time, in a self-consistent modeling of both the gaseous electron-ion plasma and the electron-hole plasma in the solid on the same footing. Utilizing specific approximations for different physical scenarios, numerical solutions are presented both for the floating and the electronically contacted (biased) interface. In the latter case, the current voltage characteristic is calculated and shown to heavily depend on the charge kinetics within the wall.
Furthermore, we present optical methods to measure the wall charge noninvasively. These utilize the influence of the deposited surplus charges on the optical reflection coefficient of the surface. By calculating the optical response of these charges, we show that the magnitude of the surface charge can be inferred from the change in the reflectivity of the surface caused by the presence of the plasma. While nonlocal effects are considered, it is shown analytically and numerically that these can be neglected at the scales of the considered physical systems.
The biomechanical (Young's modulus, adhesion force, deformability) properties of platelets depend on the cytoskeleton and have an undisputed influence on physiological and pathological processes such as hemostasis and thrombosis. The alterations of these biomechanical properties can be used as label-free diagnostic markers in initiation or progressive diseases such as MYH9-inherited disease. Therefore, the focus of my thesis was to investigate the relationship between the changes in platelet cytoskeleton proteins and the resulting biomechanical properties using biophysical methods.
In the first chapter of my thesis I focused on my review of the biophysical methods that are most commonly used to assess and quantify the biomechanical properties of platelets. In this review, I provide an in-depth insight into the governing principles and instrumentation setup and discuss relevant examples applied to platelet mechanics. In addition, my review also summarizes the limitations of these biophysical methods and highlight latest improvements. The review covers the following techniques: micropipette aspiration, atomic force microscopy (AFM), scanning ion conductance microscopy (SICM), tensile force microscopy on hydrogel substrates, microcolumns, and deformable 3D substrates, and real-time deformability cytometry (RT-DC). This review is directed toward clinician scientists who are interested in exploring applications of single-cell based biophysical approaches in unraveling the role of platelet biomechanics in hemostasis and thrombosis research.
In the second chapter of my thesis, I present my research paper on the influence of commonly used ex vivo anticoagulants on the intrinsic biomechanical properties and functional parameters (e.g. activation profils) of human platelets. To comprehensively assess this, platelets obtained in different ex vivo anticoagulants such as ACD-A, Na-Citrate, K2-EDTA, Li-Heparin, and r-Hirudin were used, and their biomechanical properties were determined by real-time fluorescence and deformability cytometry (RT-FDC). Flow cytometry, and confocal laser scanning fluorescence microscopy were used to determine platelet function properties. K2-EDTA and Li-Heparin were found to affect platelet biomechanics by increasing actin polymerization of non-stimulated human platelets. This increased actin polymerization results in decreased platelet deformation. It is recommended that an ex vivo anticoagulant such as ACD-A, Na-Citrate, or r-Hirudin be chosen for the study of the cytoskeleton of human platelets and, if possible, that it not be exchanged, because comparability of results is not assured. Furthermore, I demonstrate the significance of choosing correct ex vivo anticoagulants in RT-FDC by showing that platelets from a healthy donor and a MYH9 patient with the E1841K point mutation differ in their deformation. This paper is the first comprehensive investigation at the single platelet level to establish the relevance of preanalytical standardization in platelet sample preparation for biomechanical studies.
The third chapter of my thesis is focused on the biomechanical analyses of platelets and thrombi from MYH9-related disease. Here I studied three Myh9 mouse lines with a point mutation in the Myh9 gene at positions 702, 1424, or 1841. Furthermore, two MYH9 patients (MYH9 p.D1424N, MYH9 p.E1841K) were examined. MYH9-related disease (MYH9-RD) presents with macrothrombocytopenia with a moderate bleeding tendency. It is caused by mutations in the MYH9 gene that lead to alteration of non-muscle myosin heavy chains type IIA (NMMHC IIA), resulting in disruption of the platelet cytoskeleton. Western blot analysis, flow cytometry, in vitro aggregometry, and transmission electron microscopy demonstrated that Myh9 point mutant mice have comparable primary function compared to the control group. The heterozygous point mutations in the Myh9 gene resulted in decreased platelet deformation (RT-FDC), decreased platelet adhesion to collagen (single platelet force spectroscopy-SPFS), and decreased platelet-platelet interaction forces (SPFS). Decreased platelet force (Micropost Arrays) results in softer thrombi (colloidal probe Spectroscopy), impaired clot retraction, and thus prolonged bleeding time. The R702C, D1424N, and E1841K mutations have a similar effect on platelet biomechanical functions, although the E1841K mutation had less impact on thrombus formation and stiffness. MYH9-RD patients have an increased risk of bleeding, and the antifibrinolytic drug tranexamic acid (TXA) is one way to control bleeding complications in these patients. It was shown that TXA treatment significantly reduced bleeding time in the three Myh9 mouse models, confirming that the enhanced bleeding phenotype due to decreased platelet forces in Myh9 mutant mice can be compensated by the addition of TXA.
With the biophysical methods and research results presented in my thesis, it is clear that it is essential to study the altered response of the platelet cytoskeleton by cytoskeletal mutations, biochemical, physical stimuli, or by pharmacological aspects. This will provide us with an opportunity to better understand the underlying mechanisms and thus contribute to better clinical treatment.
Cell mechanical properties reveal substantial information on cell state and function. Utilizing mechanics as a label-free biomarker allows for investigation of fundamental cellular processes as well as biomedical applications, e.g., disease diagnosis. High-throughput methods for accessing the elastic properties of cells in suspension from hydrodynamic deformation in a microfluidic constriction are available with real-time analysis rates of up to 1000 cells per second. However, accessing elastic as well as viscous properties of cells and multicellular systems in suspension as well as adhered to surfaces at high throughput has not been possible so far. In this thesis, I approached this question and developed as well as applied microfluidic and holographic technologies to analyze the viscoelastic properties of single cells and multicellular aggregates, respectively.
First, I demonstrated that real-time deformability cytometry (RT-DC) can be applied in transfusion medicine, where the highest quality standards have to be maintained while blood product release is time-critical. We showed for platelet and red blood cell concentrates as well as for hematopoietic stem cells that their mechanical properties can be used for label-free quality assessment. The results have been published in Lab on a Chip (Aurich et al. 2020).
For RT-DC and many other methods based on hydrodynamic deformation, the constriction size has to be adapted to the objects of interest to allow for a shear-induced deformation. We introduced virtual fluidic channels, which are established by two co-flowing aqueous polymer solutions. Virtual fluidic channels can be precisely adjusted in their cross section, allowing for mechanical phenotyping of single cells as well as cell clusters or tissue spheroids in one microfluidic system. Importantly, measurements can also be performed in standard microfluidic geometries beyond soft lithography, e.g., in the cuvette of a flow cytometer. For cell spheroids as a model system for multicellular aggregates, we show a 10-fold lower Young's modulus of the tissue compared to single-cell mechanics, suggesting cell-cell and cell-matrix interactions being potential contributors to the mechanics of multicellular aggregates. Our work on virtual fluidic channels has been published in Nature Communications (Panhwar et al. 2020).
Within this thesis, I expanded the high-throughput elastic phenotyping performed by RT-DC towards viscoelastic cell properties by developing dynamic real-time deformability cytometry (dRT-DC). Dynamic tracking of cells while passing the microfluidic constriction allows to access steady-state (elasticity) and time-dependent (viscosity) material properties for a complete viscoelastic characterization of cells in suspension at high throughput. I introduced a shape mode decomposition based on a Fourier transformation, which allows to disentangle the superimposed stress responses to an extensional stress at the channel inlet and a constant shear stress in the channel. These hydrodynamic stress distributions are present in almost every microfluidic channel geometry. From the separated stress responses, viscoelastic material properties can be determined independent of cell shape.
We demonstrated experimentally the sensitivity of dRT-DC to cytoskeletal alterations and confirmed the validity of the method by reference measurements on calibrated hydrogel beads. In our work, we also presented a viscoelastic fingerprint of the major subpopulations of peripheral blood: erythrocytes, granulocytes, and peripheral blood mononuclear cells (PBMCs) (e.g., lymphocytes and monocytes), all characterized by the same method. The technique and the results have been published in Nature Communications (Fregin et al. 2019).
In cell mechanical methods based on hydrodynamic deformation, cell shape is usually monitored while a stress is applied. For extraction of material properties as well as for studying shape dynamics, it is essential to describe cell shape yielding highest strain differences for a given microfluidic system and experimental setting. Using dRT-DC, I compared nine different shape descriptors to analyze cell deformation in an extensional as well as shear flow. A relaxation time analysis was performed on different levels of data aggregation from single cells to an ensemble scale. I demonstrated that the steady-state deformation can be predicted from stress response curves without them reaching the steady-state. This is important for cell mechanical measurements in microfluidic systems as the characteristic times are unknown in general and as the channel length is fixed. In addition, by introducing a cut-off criterion for how much of the response trace needs to be captured within the channel, the analysis time per cell can be reduced while material properties can still be extracted. Performing simulations, I compared the accuracy of relaxation times extracted from ensemble and single-cell studies under experimental conditions. Introducing a scoring system to evaluate which combinations of shape descriptors and analysis strategies provide biggest effect size, we concluded that single-cell analyses in an extensional flow are most sensitive to cytoskeletal modifications independent of shape parametrization. The manuscript was submitted to the Biophysical Journal.
Finally, I translated the fast non-contact cell mechanical probing from suspension to adherent cells. No such technology has been available and with the majority of cells being adherent, a robust label-free method for mechanophenotyping at high-throughput is required. Within this thesis, I have introduced and realized a new concept: holographic vibration spectroscopy (HVS), where adherent cells are mechanically excited on a vibrating surface while their height oscillations are measured optically. Analysis is done in an interferometric heterodyne setup by using frequency multiplexing and time-averaged holography in off-axis configuration. Based on interference images captured by a high-speed complementary metal-oxide-semiconductor (CMOS) camera, I established a mathematical model to reconstruct the vibration amplitude of adherent cells as well as their retardation phase compared to the exciting vibration. From the amplitude and phase response, viscoelastic parameters can be derived, which have to be investigated in subsequent studies.
In summary, I introduced in my work two high-throughput methods for the viscoelastic characterization of suspended as well as adherent cells while highlighting applications in tissue mechanics and transfusion medicine that are relevant not only in basic but also in translational research.
In this work, spatial distributions for reactive stable and transient species that are involved
in the reaction cycle of H2O2, a key species for biomedical applications, were
determined directly in the effluent of a kINPen-sci plasma jet. The small diameter
of cold atmospheric pressure plasma jets and their operation at atmospheric pressure
that causes strong quenching reactions make diagnostics challenging. Here, various diagnostic
techniques have been employed and adapted for the use in the effluent of a
cold atmospheric pressure plasma jet, which were laser atomic absorption spectroscopy
(LAAS) at 811.5 nm for the detection of Ar(3P2), picosecond two-photon absorption
laser-induced fluorescence spectroscopy (ps-TALIF) at 225 nm and 205 nm for the
detection of O and H atoms, respectively, and continuous wave cavity ring-down spectroscopy
(cw-CRDS) at 1.506 µm for the detection of HO2, and cw-CRDS at 8000 µm
for the detection of H2O2. All these methods provide absolute number densities. In
this work, spatial distributions within the small diameter of the effluent of a CAPJ
were obtained, which have not been reported so far literature. In order to overcome the
line-of-sight limitations of CRDS, radial scans were performed and transformed into a
spatial distribution by using Abel inversion.
Based on the determined spatial density distributions for H atoms, O atoms, HO2
radicals, and H2O2 molecules, together with the investigated impact of humidity in the
feed gas on the excitation dynamics and the production of Ar(3P2), and finally on a
comparison of the experimental results to a plasma chemical and reacting flow model,
three different zones with varying reaction kinetics were identified. The densities close
to the nozzle of the kINPen-sci plasma jet were dominated by reactions within the
plasma zone including the dissociation of H2O added to the Ar feed gas and O2 that
was presumably transferred into the plasma zone by counter-propagating ionisation
waves. Notably, also the larger molecules, such as HO2 and H2O2 were mainly formed
within the plasma zone of the plasma jet. Between 1.5 mm and 5 mm below the nozzle,
the atomic species and molecular radicals generated in the plasma zone were consumed
by chemical reactions with the surrounding gas, whose composition was controlled by
applying a gas curtain. At further distances from the nozzle, where typically biological
samples are positioned, only H2O2 and HO2 were observed.
With this work, it is successfully demonstrated that even for the small diameters of
cold atmospheric pressure plasma jets the determination of spatial profiles for reactive
transient and stable species is possible within the effluent. By combining the experimental
results, important insights into the formation and consumption of H2O2 and its
precursors were gained, which are essential for the understanding of use of plasmas in
biomedical applications.
Detecting changes in plasmas is compulsory for control and the detection of novelties.
Moreover, automated novelty detection allows one to investigate large data sets to substantially
enhance the efficiency of data mining approaches. To this end we introduce permutation entropy
(PE) for the detection of changes in plasmas. PE is an information-theoretic complexity measure
based in fluctuation analysis that quantifies the degree of randomness (resp. disorder,
unpredictability) of the ordering of time series data. This method is computationally fast and
robust against noise, which allows the evaluation of large data sets in an automated procedure.
PE is applied on electron cyclotron emission and soft x-ray measurements in different
Wendelstein 7-X low-iota configuration plasmas. A spontaneous transition to high core-electron
temperature (Te) was detected, as well as a localized low-coherent intermittent oscillation which
ceased when Te increased in the transition. The results are validated with spectrogram analysis
and provide evidence that a complexity measure such as PE is a method to support in-situ
monitoring of plasma parameters and for novelty detection in plasma data. Moreover, the
acceleration in processing time offers implementations of plasma-state-detection that provides
results fast enough to induce control actions even during the experiment.
Insight into the Impact of Oxidative Stress on the Barrier Properties of Lipid Bilayer Models
(2022)
As a new field of oxidative stress-based therapy, cold physical plasma is a promising tool for several biomedical applications due to its potential to create a broad diversity of reactive oxygen and nitrogen species (RONS). Although proposed, the impact of plasma-derived RONS on the cell membrane lipids and properties is not fully understood. For this purpose, the changes in the lipid bilayer functionality under oxidative stress generated by an argon plasma jet (kINPen) were investigated by electrochemical techniques. In addition, liquid chromatography-tandem mass spectrometry was employed to analyze the plasma-induced modifications on the model lipids. Various asymmetric bilayers mimicking the structure and properties of the erythrocyte cell membrane were transferred onto a gold electrode surface by Langmuir-Blodgett/Langmuir-Schaefer deposition techniques. A strong impact of cholesterol on membrane permeabilization by plasma-derived species was revealed. Moreover, the maintenance of the barrier properties is influenced by the chemical composition of the head group. Mainly the head group size and its hydrogen bonding capacities are relevant, and phosphatidylcholines are significantly more susceptible than phosphatidylserines and other lipid classes, underlining the high relevance of this lipid class in membrane dynamics and cell physiology.
Particle-in-Cell (PIC) simulations are used to model the MS4 test thruster of Thales Deutschland. Given as input the geometric shape, material components, magnetic field and the operating parameters of the experiment, the model is able to reproduce the experimentally observed emission pattern in the plume. This is determined by the magnetic field line structure and the resulting plasma dynamics in the near-field region close to the exit.
The heaviest actinide elements are only accessible in accelerator-based experiments on a one-atom-at-a-time level. Usually, fusion–evaporation reactions are applied to reach these elements. However, access to the neutron-rich isotopes is limited. An alternative reaction mechanism to fusion–evaporation is multinucleon transfer, which features higher cross-sections. The main drawback of this technique is the wide angular distribution of the transfer products, which makes it challenging to catch and prepare them for precision measurements. To overcome this obstacle, we are building the NEXT experiment: a solenoid magnet is used to separate the different transfer products and to focus those of interest into a gas-catcher, where they are slowed down. From the gas-catcher, the ions are transferred and bunched by a stacked-ring ion guide into a multi-reflection time-of-flight mass spectrometer (MR-ToF MS). The MR-ToF MS provides isobaric separation and allows for precision mass measurements. In this article, we will give an overview of the NEXT experiment and its perspectives for future actinide research.
Response of Osteoblasts to Electric Field Line Patterns Emerging from Molecule Stripe Landscapes
(2022)
Molecular surface gradients can constitute electric field landscapes and serve to control local cell adhesion and migration. Cellular responses to electric field landscapes may allow the discovery of routes to improve osseointegration of implants. Flat molecule aggregate landscapes of amine- or carboxyl-teminated dendrimers, amine-containing protein and polyelectrolytes were prepared on glass to provide lateral electric field gradients through their differing zeta potentials compared to the glass substrate. The local as well as the mesoscopic morphological responses of adhered osteoblasts (MG-63) with respect to the stripes were studied by means of Scanning Ion Conductance Microscopy (SICM) and Fluorescence Microscopy, in situ. A distinct spindle shape oriented parallel to the surface pattern as well as a preferential adhesion of the cells on the glass site have been observed at a stripe and spacing width of 20 μm. Excessive ruffling is observed at the spindle poles, where the cells extend. To explain this effect of material preference and electro-deformation, we put forward a retraction mechanism, a localized form of double-sided cathodic taxis.
Advancing Radiation-Detected Resonance Ionization towards Heavier Elements and More Exotic Nuclides
(2022)
RAdiation-Detected Resonance Ionization Spectroscopy (RADRIS) is a versatile method for highly sensitive laser spectroscopy studies of the heaviest actinides. Most of these nuclides need to be produced at accelerator facilities in fusion-evaporation reactions and are studied immediately after their production and separation from the primary beam due to their short half-lives and low production rates of only a few atoms per second or less. Only recently, the first laser spectroscopic investigation of nobelium (Z=102) was performed by applying the RADRIS technique in a buffer-gas-filled stopping cell at the GSI in Darmstadt, Germany. To expand this technique to other nobelium isotopes and for the search for atomic levels in the heaviest actinide element, lawrencium (Z=103), the sensitivity of the RADRIS setup needed to be further improved. Therefore, a new movable double-detector setup was developed, which enhances the overall efficiency by approximately 65% compared to the previously used single-detector setup. Further development work was performed to enable the study of longer-lived (t1/2>1 h) and shorter-lived nuclides (t1/2<1 s) with the RADRIS method. With a new rotatable multi-detector design, the long-lived isotope 254Fm (t1/2=3.2 h) becomes within reach for laser spectroscopy. Upcoming experiments will also tackle the short-lived isotope 251No (t1/2=0.8 s) by applying a newly implemented short RADRIS measurement cycle.
AbstractPulsed streamer discharges submerged in water have demonstrated potential in a number of applications. Especially the generation of discharges by short high-voltage pulses in the nanosecond range has been found to offer advantages with respect to efficacies and efficiencies. The exploited plasma chemistry generally relies on the initial production of short-lived species, e.g. hydroxyl radicals. Since the diagnostic of these transient species is not readily possible, a quantification of hydrogen peroxide provides an adequate assessment of underlying reactions. These conceivably depend on the characteristics of the high-voltage pulses, such as pulse duration, pulse amplitude, as well as pulse steepness.A novel electrochemical flow-injection system was used to relate these parameters to hydrogen peroxide concentrations. Accordingly, the accumulated hydrogen peroxide production for streamer discharges ignited in deionized water was investigated for pulse durations of 100 ns and 300 ns, pulse amplitudes between 54 kV and 64 kV, and pulse rise times from 16 ns to 31 ns. An independent control of the individual pulse parameters was enabled by providing the high-voltage pulses with a Blumlein line. Applied voltage, discharge current, optical light emission and time-integrated images were recorded for each individual discharge to determine dissipated energy, inception statistic, discharge expansion and the lifetime of a discharge.Pulse steepness did not affect the hydrogen peroxide production rate, but an increase in amplitude of 10 kV for 100 ns pulses nearly doubled the rate to (0.19 ± 0.01) mol l−1 s−1, which was overall the highest determined rate. The energy efficiency did not change with pulse amplitude, but was sensitive to pulse duration. Notably, production rate and efficiency doubled when the pulse duration decreased from 300 ns to 100 ns, resulting in the best peroxide production efficiency of (9.2 ± 0.9) g kWh−1. The detailed analysis revealed that the hydrogen peroxide production rate could be described by the energy dissipation in a representative single streamer. The production efficiency was affected by the corresponding discharge volume, which was comprised by the collective volume of all filaments. Hence, dissipating more energy in a filament resulted in an increased production rate, while increasing the relative volume of the discharge compared to its propagation time increased the energy efficiency.
Carbon-cluster ions are produced by laser irradiation of glassy carbon in high vacuum. In the case of positively charged species, a bimodal cluster distribution including fullerenes with cluster-size-to-charge ratios of up to a few hundred is observed. Resolving isotopologues by use of a multireflection time-of-flight mass spectrometer allows the detection and abundance determination of multiply charged clusters. It is found that mono-, di-, and tricationic fullerenes are produced, have similar size-over-charge-state ranges, and follow log-normal distributions known to be characteristic of an underlying coalescent growth. A statistical simulation is shown to reproduce the results.
The lateral movement in lipid membranes depends on their diffusion constant within the membrane. However, when the flux of the subphase is high, the convective flow beneath the membrane also influences lipid movement. Lipid monolayers of an unsaturated fatty acid at the water–air interface serve as model membranes. The formation of domains in the liquid/condensed coexistence region is investigated. The dimension of the domains is fractal, and they grow with a constant growth velocity. Increasing the compression speed of the monolayer induces a transition from seaweed growth to dendritic growth. Seaweed domains have broad tips and wide and variable side branch spacing. In contrast, dendritic domains have a higher fractal dimension, narrower tips, and small, well-defined side branch spacing. Additionally, the growth velocity is markedly larger for dendritic than seaweed growth. The domains’ growth velocity increases and the tip radius decreases with increasing supersaturation in the liquid/condensed coexistence region. Implications for membranes are discussed.
AbstractMagneto-optical (MO) effects, viz. magnetically induced changes in light intensity or polarization upon reflection from or transmission through a magnetic sample, were discovered over a century and a half ago. Initially they played a crucially relevant role in unveiling the fundamentals of electromagnetism and quantum mechanics. A more broad-based relevance and wide-spread use of MO methods, however, remained quite limited until the 1960s due to a lack of suitable, reliable and easy-to-operate light sources. The advent of Laser technology and the availability of other novel light sources led to an enormous expansion of MO measurement techniques and applications that continues to this day (see section 1). The here-assembled roadmap article is intended to provide a meaningful survey over many of the most relevant recent developments, advances, and emerging research directions in a rather condensed form, so that readers can easily access a significant overview about this very dynamic research field. While light source technology and other experimental developments were crucial in the establishment of today’s magneto-optics, progress also relies on an ever-increasing theoretical understanding of MO effects from a quantum mechanical perspective (see section 2), as well as using electromagnetic theory and modelling approaches (see section 3) to enable quantitatively reliable predictions for ever more complex materials, metamaterials, and device geometries. The latest advances in established MO methodologies and especially the utilization of the MO Kerr effect (MOKE) are presented in sections 4 (MOKE spectroscopy), 5 (higher order MOKE effects), 6 (MOKE microscopy), 8 (high sensitivity MOKE), 9 (generalized MO ellipsometry), and 20 (Cotton–Mouton effect in two-dimensional materials). In addition, MO effects are now being investigated and utilized in spectral ranges, to which they originally seemed completely foreign, as those of synchrotron radiation x-rays (see section 14 on three-dimensional magnetic characterization and section 16 on light beams carrying orbital angular momentum) and, very recently, the terahertz (THz) regime (see section 18 on THz MOKE and section 19 on THz ellipsometry for electron paramagnetic resonance detection). Magneto-optics also demonstrates its strength in a unique way when combined with femtosecond laser pulses (see section 10 on ultrafast MOKE and section 15 on magneto-optics using x-ray free electron lasers), facilitating the very active field of time-resolved MO spectroscopy that enables investigations of phenomena like spin relaxation of non-equilibrium photoexcited carriers, transient modifications of ferromagnetic order, and photo-induced dynamic phase transitions, to name a few. Recent progress in nanoscience and nanotechnology, which is intimately linked to the achieved impressive ability to reliably fabricate materials and functional structures at the nanoscale, now enables the exploitation of strongly enhanced MO effects induced by light–matter interaction at the nanoscale (see section 12 on magnetoplasmonics and section 13 on MO metasurfaces). MO effects are also at the very heart of powerful magnetic characterization techniques like Brillouin light scattering and time-resolved pump-probe measurements for the study of spin waves (see section 7), their interactions with acoustic waves (see section 11), and ultra-sensitive magnetic field sensing applications based on nitrogen-vacancy centres in diamond (see section 17). Despite our best attempt to represent the field of magneto-optics accurately and do justice to all its novel developments and its diversity, the research area is so extensive and active that there remains great latitude in deciding what to include in an article of this sort, which in turn means that some areas might not be adequately represented here. However, we feel that the 20 sections that form this 2022 magneto-optics roadmap article, each written by experts in the field and addressing a specific subject on only two pages, provide an accurate snapshot of where this research field stands today. Correspondingly, it should act as a valuable reference point and guideline for emerging research directions in modern magneto-optics, as well as illustrate the directions this research field might take in the foreseeable future.
AbstractThe 2022 Roadmap is the next update in the series of Plasma Roadmaps published by Journal of Physics D with the intent to identify important outstanding challenges in the field of low-temperature plasma (LTP) physics and technology. The format of the Roadmap is the same as the previous Roadmaps representing the visions of 41 leading experts representing 21 countries and five continents in the various sub-fields of LTP science and technology. In recognition of the evolution in the field, several new topics have been introduced or given more prominence. These new topics and emphasis highlight increased interests in plasma-enabled additive manufacturing, soft materials, electrification of chemical conversions, plasma propulsion, extreme plasma regimes, plasmas in hypersonics, data-driven plasma science and technology and the contribution of LTP to combat COVID-19. In the last few decades, LTP science and technology has made a tremendously positive impact on our society. It is our hope that this roadmap will help continue this excellent track record over the next 5–10 years.
AbstractGas puff modulation experiments are performed at ASDEX Upgrade in L-mode plasmas. We model the discharge with the ASTRA transport code in order to determine transport coefficients outside of a normalized radius of ρ
pol = 0.95. The experimental data is consistent with a range of particle diffusivities and pinch velocities of the order of D = (0.20 ± 0.13) m2 s−1 and v = (−1 ± 2) m s−1, respectively. The electron temperature response caused by the gas modulation permits to estimate also that heat diffusivity χ
e increases almost linearly when collisionality rises due to fuelling. The fuelling particle flux is amplified by recycling, overcompensating losses.
The nature and origin of electronic nematicity remains a significant challenge in our
understanding of the iron-based superconductors. This is particularly evident in the
iron chalcogenide, FeSe, where it is currently unclear how the experimentally
determined Fermi surface near the M point evolves from having two electron pockets
in the tetragonal state, to exhibiting just a single electron pocket in the nematic state. This
has posed a major theoretical challenge, which has become known as the missing electron
pocket problem of FeSe, and is of central importance if we wish to uncover the secrets
behind nematicity and superconductivity in the wider iron-based superconductors. Here,
we review the recent experimental work uncovering this nematic Fermi surface of FeSe
from both ARPES and STM measurements, as well as current theoretical attempts to
explain this missing electron pocket of FeSe, with a particular focus on the emerging
importance of incorporating the dxy orbital into theoretical descriptions of the nematic
state. Furthermore, we will discuss the consequence this missing electron pocket has on
the theoretical understanding of superconductivity in this system and present several
remaining open questions and avenues for future research.
Comparison of mesospheric sodium profile retrievals from OSIRIS and SCIAMACHY nightglow measurements
(2022)
Sodium airglow is generated when excited sodium atoms emit electromagnetic radiation while they are relaxing from an excited state into a lower energetic state. This electromagnetic radiation, the two sodium D lines at 589.0 and 589.6 nm, can usually be detected from space or from ground. Sodium nightglow occurs at times when the sun is not present and excitation of sodium atoms is a result of chemical reaction with ozone. The detection of sodium nightglow can be a means to determine the amount of sodium in the earth's mesosphere and lower thermosphere (MLT). In this study, we present time series of monthly mean sodium concentration profiles, by utilizing the large spatial and temporal coverage of satellite sodium D-line nightglow measurements. We use the OSIRIS/Odin mesospheric limb measurements to derive sodium concentration profiles and vertical column densities and compare those to measurements from SCIAMACHY/Envisat and GOMOS/Envisat. Here we show that the Na D-line limb emission rate (LER) and volume emission rate (VER) profiles calculated from the OSIRIS and SCIAMACHY measurements, although the OSIRIS LER and VER profiles are around 25 % lower, agree very well in shape and overall seasonal variation. The sodium concentration profiles also agree in shape and magnitude, although those do not show the clear semi-annual cycle which is present in the LER and VER profiles. The comparison to the GOMOS sodium vertical column densities (VCDs) shows that the OSIRIS VCDs are of the same order of magnitude although again the semi-annual cycle is not as clear. We attribute the differences in the LER, VER and sodium profiles to the differences in spatial coverage between the OSIRIS and SCIAMACHY measurements, the lower signal-to-noise ratio (SNR) of the SCIAMACHY measurements and differences in local time between the measurements of the two satellites.
The capability to parameterize shapes is of essential importance in biomechanics to identify cells, to track their motion, and to quantify deformation. While various shape descriptors have already been investigated to study the morphology and migration of adherent cells, little is known of how the mathematical definition of a contour impacts the outcome of rheological experiments on cells in suspension. In microfluidic systems, hydrodynamic stress distributions induce time-dependent cell deformation that needs to be quantified to determine viscoelastic properties. Here, we compared nine different shape descriptors to characterize the deformation of suspended cells in an extensional as well as shear flow using dynamic real-time deformability cytometry. While stress relaxation depends on the amplitude and duration of stress, our results demonstrate that steady-state deformation can be predicted from single cell traces even for translocation times shorter than their characteristic time. Implementing an analytical simulation, performing experiments, and testing various data analysis strategies, we compared single cell and ensemble studies to address the question of computational costs vs experimental accuracy. Results indicate that high-throughput viscoelastic measurements of cells in suspension can be performed on an ensemble scale as long as the characteristic time matches the dimensions of the microfluidic system. Finally, we introduced a score to evaluate the shape descriptor-dependent effect size for cell deformation after cytoskeletal modifications. We provide evidence that single cell analysis in an extensional flow provides the highest sensitivity independent of shape parametrization, while inverse Haralick's circularity is mostly applicable to study cells in shear flow.
We investigate local THz field generation using spintronic THz emitters to enhance the resolution for micrometer-sized imaging. Far-field imaging with wavelengths above 100 µm limits the resolution to this order of magnitude. By using optical laser pulses as a pump, THz field generation can be confined to the area of laser beam focusing. The divergence of the generated THz beam due to laser beam focusing requires the imaged object to be close to the generation spot at a distance below the THz field wavelength. We generate THz-radiation by fs-laser pulses in CoFeB/Pt heterostructures, based on spin currents, and detect them by commercial low-temperature grown-GaAs (LT-GaAs) Auston switches. The spatial resolution of THz radiation is determined by applying a 2D scanning technique with motorized stages allowing step sizes in the sub-micrometer range. Within the near-field limit, we achieve spatial resolution in the dimensions of the laser spot size on the micrometer scale. For this purpose, a gold test pattern is evaporated on the spintronic emitter separated by a 300 nm SiO2 spacer layer. Moving these structures with respect to the femtosecond laser spot, which generates THz radiation, allows for resolution determination. The knife-edge method yields a full-width half-maximum beam diameter of 4.9 +- 0.4 µm at 1 THz. The possibility to deposit spintronic emitter heterostructures on simple glass substrates makes them attractive candidates for near-field imaging in many imaging applications.
We use time-evolution techniques for (infinite) matrix product states to calculate, directly in the thermodynamic limit, the time-dependent photoemission spectra and dynamic structure factors of the half-filled Hubbard chain after pulse irradiation. These quantities exhibit clear signatures of the photoinduced phase transition from insulator to metal that occurs because of the formation of so-called η pairs. In addition, the spin dynamic structure factor loses spectral weight in the whole momentum space, reflecting the suppression of antiferromagnetic correlations due to the buildup of η-pairing states. The numerical method demonstrated in this work can be readily applied to other one-dimensional models driven out of equilibrium by optical pumping.
Complex plasma is a state of soft matter where micrometer-sized particles are immersed in a weakly ionized gas. The particles acquire negative charges of the order of several thousand elementary charges in the plasma, and they can form gaseous, liquid and crystalline states. Direct optical observation of individual particles allows to study their dynamics on the kinetic level even in large many-particle systems. Gravity is the dominant force in ground-based experiments, restricting the research to vertically compressed, inhomogeneous clouds, or two-dimensional systems, and masking dynamical processes mediated by weaker forces. An environment with reduced gravity, such as provided on the International Space Station (ISS), is therefore essential to overcome this limitations. We will present the research goals for the next generation complex plasma facility COMPACT to be operated onboard the ISS. COMPACT is envisaged as an international multi-purpose and multi-user facility that gives access to the full three-dimensional kinetic properties of the particles.
A hollow cathode discharge with a Ti cathode and a positively biased ring anode was operated in Ar + N2 or Ar + O2 gas mixtures. The energy distribution of plasma ions is investigated with the help of energy-resolved mass spectrometry. Singly and doubly charged Ar+ and Ar2+ ions and molecular N+2 or O+2 ions are the most abundant ionic species. The kinetic energy of all plasma ions is enhanced by a positive anode voltage.
Magnetooptical properties of one-dimensional aperiodic structures formed by stacking together magnetic and nonmagnetic layers according to the Kolakoski self-generation scheme are studied theoretically using the 4x4 transfer matrix method. The effect of the generation stage of the sequence, and the helicity and direction of light propagation through the magneto-photonic crystals on the transmission/reflection spectra as well as Faraday and ellipticity rotations, have been investigated. Our results reveal that this kind of aperiodic magneto-photonic crystals can be used for the fabrication of multifrequency laser cavities, and optical filters/sensors.
The idea of estimating stratospheric aerosol optical thickness from the twilight colours in historic paintings – particularly under conditions of volcanically enhanced stratospheric aerosol loading – is very tantalizing because it would provide information on the stratospheric aerosol loading over a period of several centuries. This idea has in fact been applied in a few studies in order to provide quantitative estimates of the aerosol optical depth after some of the major volcanic eruptions that occurred during the past 500 years. In this study we critically review this approach and come to the conclusion that the uncertainties in the estimated aerosol optical depths are so large that the values have to be considered questionable. We show that several auxiliary parameters – which are typically poorly known for historic eruptions – can have a similar effect on the red–green colour ratio as a change in optical depth typically associated with eruptions such as, for example, Tambora in 1815 or Krakatoa in 1883. Among the effects considered here, uncertainties in the aerosol particle size distribution have the largest impact on the colour ratios and hence the aerosol optical depth estimate. For solar zenith angles exceeding 80∘, uncertainties in the stratospheric ozone amount can also have a significant impact on the colour ratios. In addition, for solar zenith angles exceeding 90∘ the colour ratios exhibit a dramatic dependence on solar zenith angle, rendering the estimation of aerosol optical depth highly challenging. A quantitative determination of the aerosol optical depth may be possible for individual paintings for which all relevant parameters are sufficiently well constrained in order to reduce the related errors.
The Mt. Pinatubo eruption in 1991 had a severe impact on the Earth system, with a well-documented warming of the tropical lower stratosphere and a general cooling of the surface. This study focuses on the impact of this event on the mesosphere by analyzing solar occultation temperature data from the Halogen Occultation Experiment (HALOE) instrument on the Upper Atmosphere Research Satellite (UARS). Previous analyses of lidar temperature data found positive temperature anomalies of up to 12.9 K in the upper mesosphere that peaked in 1993 and were attributed to the Pinatubo eruption. Fitting the HALOE data according to a previously published method indicates a maximum warming of the mesosphere region of 4.1 ± 1.4 K and does not confirm significantly higher values reported for that lidar time series. An alternative fit is proposed that assumes a more rapid response of the mesosphere to the volcanic event and approximates the signature of the Pinatubo with an exponential decay function having an e-folding time of 6 months. It suggests a maximum warming of 5.4 ± 3.0 K, if the mesospheric perturbation is assumed to reach its peak 4 months after the eruption. We conclude that the HALOE time series probably captures the decay of a Pinatubo-induced mesospheric warming at the beginning of its measurement period.
The high-latitude phenomenon of noctilucent clouds (NLCs) is characterised by a silvery-blue or pale blue colour. In this study, we employ the radiative transfer model SCIATRAN to simulate spectra of solar radiation scattered by NLCs for a ground-based observer and assuming spherical NLC particles. To determine the resulting colours of NLCs in an objective way, the CIE (International Commission on Illumination) colour-matching functions and chromaticity values are used. Different processes and parameters potentially affecting the colour of NLCs are investigated, i.e. the size of the NLC particles, the abundance of middle atmospheric O3 and the importance of multiply scattered solar radiation. We affirm previous research indicating that solar radiation absorption in the O3 Chappuis bands can have a significant effect on the colour of the NLCs. A new result of this study is that for sufficiently large NLC optical depths and for specific viewing geometries, O3 plays only a minor role for the blueish colour of NLCs. The simulations also show that the size of the NLC particles affects the colour of the clouds. Cloud particles of unrealistically large sizes can lead to a reddish colour. Furthermore, the simulations show that the contribution of multiple scattering to the total scattering is only of minor importance, providing additional justification for the earlier studies on this topic, which were all based on the single-scattering approximation.