Refine
Document Type
- Doctoral Thesis (3)
Language
- English (3)
Has Fulltext
- yes (3) (remove)
Is part of the Bibliography
- no (3) (remove)
Keywords
- Atmosphärendruckplasma (3) (remove)
Institute
- Institut für Pharmazie (3) (remove)
Microalgae are aquatic, unicellular, eukaryotic organisms, which perform photosynthesis. They have gained interest within the last decades not only for biofuel production due to their high amount of lipids, but also for pharmaceutical and for nutraceutical purposes. Interesting compounds are proteins, carbohydrates, or pigments, such as carotenoids. However, microalgae possess strong and rigid cell walls, which hinder a sufficient and yet, gentle extraction of those valuable compounds. Although standard extraction techniques are available, several shortcomings occur, e.g. high energy demand, use of environmentally harmful solvents or alteration of compounds due to heat or chemicals. Therefore, an alternative method is needed, which is able to address these disadvantages. Physical plasmas were thus studied to answer the question whether they are able to disintegrate the cell walls of microalgae effectively and yet, without degradation of the extractives.
First step of the thesis was to find a suitable plasma source that has an effect on the cell walls because plasma effects, such as electric fields, shockwaves, UV light emission, and the generation of reactive species can be tailored with the respective setup. It was found that spark discharges are most effective for the extraction of Chlorella vulgaris, which was chosen as model organism. All extraction yields were compared to reference methods, whereat microwave radiation was found to be the most effective reference method and were hence, applied for comparative studies.
For the next step, proteins were selected as targets to answer the question, which differences can be determined between plasms-treated and microwave-radiated proteins are observable although the extraction yields were equal. Furthermore, plasma effects, especially the effects of reactive species on the extracted proteins had to be studied. Findings indicate that heat sensitive proteins, such as photosystem-related proteins, or histones are better extractable with spark discharges than with microwave exposure and the effect of reactive species is only minor.
The last step was to determine, which plasma effect is responsible for the observed cell wall disintegration. Therefore, the tensile strength of Chlorella vulgaris was determined and compared to the shockwave pressure, which is generated from the spark channel. It was proven that the shockwave pressure exceeds by far the tensile strength of the microalgae an can be thus held responsible for mechanism for cell wall rupture.
In this thesis, it was found that spark discharges are a promising alternative for the extraction of valuable compounds from microalgae. The discharges are not only effective, but also gentle enough for sensitive compounds, such as proteins or pigments.
Pharmaceutical residues are found in increasing concentrations in the environment and in potable water where they have verifiable effects on aquatic life. Conventional methods for water treatment are not able to sufficiently abate these generally stable compounds. It was found that physical plasma generated directly in water can degrade several of these recalcitrant organic pollutants. Studies on the basic plasma chemical processes for the model system of phenol showed that the degradation is primarily caused by hydroxyl radicals. This was confirmed by reaction chemistry and spin trap enhanced electron paramagnetic resonance spectroscopy (EPR). The degradation of diclofenac and its by-products were investigated in detail to perform a first risk-assessment of the new technology. Findings are not limited to the application of plasma but applicable to other advanced oxidation processes (AOP) that are based on the generation of hydroxyl radicals as well. Additionally, pulsed corona plasma and pulsed electric fields were assessed for their capacity to kill Legionella pneumophila in water. Whereas it was possible to kill L. Pneumophila with both methods, plasma treatment resulted in an enhanced bacterial killing. Therefore, advanced oxidation processes (AOP) and plasma treatment in particular are some of the few feasible approaches to decompose recalcitrant compounds in water.
The biological decontamination and sterilization is a crucial processing step in producing and reprocessing of medical devices. Since polymer-based materials are increasingly used for the production of medical devices, the application of conventional sterilization processes are restricted to a certain extent. Conventional sterilization techniques on the basis of high temperatures, toxic gases, or ionizing radiation can be detrimental to the functionality and performance of polymeric materials. For this reason, alternative, gentle, and efficient decontamination processes are required. One possible approach is the use of non-thermal physical plasmas. Especially atmospheric pressure plasma is receiving great interest due to the absence of vacuum systems which is highly attractive for the practical applicability. Its mechanisms of action enable the efficient killing and inactivation of micro-organisms which are attributed to the interaction of plasma-generated reactive oxygen and nitrogen species (ROS, RNS) as well as plasma-emitted (V)UV radiation. Owing to the moderate gas temperatures (near or at room temperature) so-called cold plasmas are well-suitable for the treatment of heat-sensitive materials, such as polymers, without affecting their bulk properties. The present work focuses on the investigation of atmospheric pressure plasma processes for the biological decontamination of polymers. The objective is to help elucidate on the one hand the impact of varied plasma process parameters on the inactivation of micro-organisms and on the other hand the influence of plasma on the surface properties of the substrate. The investigations were performed by means of a high-frequency driven plasma jet (from the product line kINPen) operated with argon and argon-oxygen mixtures. Three main aspects were analyzed: 1. The effect of plasma on the viability of micro-organisms dependent on working gas, treatment time, and the sample distance (distance between the jet nozzle and the substrate). 2. The plasma-based removal of microbial biofilms. 3. The effects of the plasma treatment on the surface properties of selected polymers. Additionally to the capability of the applied plasma jet in killing microbes the efficacy of this plasma jet for the removal of complex biological systems (e.g. biofilms) is shown. To model cell constituents of bacteria different synthetic polymers were chosen to gain insight into the decomposition process responsible for biofilm degradation. By investigating the impact of atmospheric pressure plasma on physico-chemical surface properties of various synthetic aliphatic and aromatic polymers the interaction mechanisms between plasma and plasma-exposed material are discussed. These studies are accompanied by applying different optical plasma diagnostic techniques (optical emission spectroscopy and two-photon absorption laser induced fluorescence spectroscopy) to obtain information on the plasma gas phase which contributes to the elucidation of the reaction mechanisms occurring during plasma exposure. Moreover, it is presented to which extent the plasma treatment influences the surface properties of polymers during the plasma-based bio-decontamination process and further, the benefits of surface-functionalized polymers for biomedical application is discussed.