Refine
Year of publication
Document Type
- Doctoral Thesis (160)
- Article (97)
- Conference Proceeding (17)
Has Fulltext
- yes (274)
Is part of the Bibliography
- no (274)
Keywords
- - (78)
- Plasma (25)
- Plasmaphysik (25)
- Plasmadiagnostik (14)
- Stellarator (13)
- Komplexes Plasma (7)
- Polyelektrolyt (7)
- Wendelstein 7-X (7)
- Cluster (6)
- Kernfusion (6)
- dusty plasma (6)
- Atmosphärendruckplasma (5)
- Hochfrequenzplasma (5)
- Ionenfalle (5)
- Massenspektrometrie (5)
- Metallcluster (5)
- barrier discharge (5)
- Adsorption (4)
- Barrierenentladung (4)
- Diffusion (4)
- Divertor (4)
- Fusion (4)
- Fusionsplasma (4)
- Magnetron (4)
- Modellierung (4)
- Niedertemperaturplasma (4)
- Penningfalle (4)
- Physik (4)
- Plasma-Wand-Wechselwirkung (4)
- Plasmachemie (4)
- Plasmadynamik (4)
- Polyanion (4)
- Simulation (4)
- Spektroskopie (4)
- Turbulenz (4)
- magnetron sputtering (4)
- plasma (4)
- stellarator (4)
- surface charge (4)
- 52.70.Ds (3)
- Absorptionsspektroskopie (3)
- Aluminium (3)
- Clusterion (3)
- Dissertation (3)
- Ellipsometrie (3)
- Emissionsspektroskopie (3)
- FT-IR-Spektroskopie (3)
- Festkörperphysik (3)
- Flugzeitspektrometrie (3)
- Gasentladung (3)
- Glimmentladung (3)
- Kernphysik (3)
- Laser (3)
- Laserinduzierte Fluoreszenz (3)
- Laserspektroskopie (3)
- Leuchtstofflampe (3)
- Penning trap (3)
- Plasma Physics (3)
- Plasmamedizin (3)
- Plasmarandschicht (3)
- Polymere (3)
- Quantenoptik (3)
- Selbstorganisation (3)
- Tokamak (3)
- laser spectroscopy (3)
- mass separation (3)
- negative ions (3)
- oxygen (3)
- plasma diagnostics (3)
- polyanion (3)
- tokamak (3)
- turbulence (3)
- 3D (2)
- Abstimmbarer Laser (2)
- Alfvén-Welle (2)
- Anion (2)
- Atmosphärendruck (2)
- Beschichten (2)
- Beschichtung (2)
- Brennfleck (2)
- Cardiolipin (2)
- Clusterphysik (2)
- Computerphysik (2)
- Driftwelle (2)
- Dynamik (2)
- Emission (2)
- FTIR spectroscopy (2)
- Festkörper (2)
- Floquet (2)
- Flugzeitmassenspektrometrie (2)
- Fragmentation (2)
- Fullerene (2)
- Fusionsreaktor (2)
- Graphen (2)
- Heißes Plasma (2)
- Helium (2)
- HiPIMS (2)
- Impurities (2)
- Infrarotspektroskopie (2)
- Instabilität (2)
- Kaltes Plasma (2)
- Kathode (2)
- Kernstruktur (2)
- Lipide (2)
- Low Temperature Plasma (2)
- MR-ToF MS (2)
- MR-ToF device (2)
- Magnetfeld (2)
- Magnetic Confinement (2)
- Magnetische Rekonnexion (2)
- Magnetohydrodynamik (2)
- Monoschicht (2)
- Monte-Carlo-Simulation (2)
- Multi-reflection time-of-flight mass spectrometry (2)
- Nanopartikel (2)
- Neutronenbeugung (2)
- Nuclear Physics (2)
- Optisches Messgerät (2)
- Optomechanik (2)
- Oxidation (2)
- Plasma physics (2)
- RNS (2)
- ROS (2)
- Rasterkraftmikroskopie (2)
- Reflektometrie (2)
- Rekonstruktion (2)
- Röntgenreflektometrie (2)
- Sauerstoff (2)
- Sekundärelektronen (2)
- Stereoskopie (2)
- Stickstoff (2)
- Theoretische Physik (2)
- W7-AS (2)
- W7-X (2)
- Weiche Materie (2)
- X-ray diffraction (2)
- Xenon (2)
- atmospheric pressure (2)
- atomic clusters (2)
- atomic force microscopy (2)
- cell mechanics (2)
- cold physical plasma (2)
- complex plasma (2)
- dusty plasmas (2)
- electrode (2)
- electron–hole plasma (2)
- erosion (2)
- gap voltage (2)
- guided streamer (2)
- inductively coupled plasma (2)
- ion mass spectrometry (2)
- ionosphere (2)
- laser photodetachment (2)
- laser-induced fluorescence (2)
- low temperature plasma (2)
- magnetic fields (2)
- mapping (2)
- memory effect (2)
- microwave interferometry (2)
- mode transition (2)
- multi-reflection time-of-flight mass spectrometry (2)
- numerical simulation (2)
- plasma chemistry (2)
- plasma medicine (2)
- polyelectrolyte multilayer (2)
- polyelectrolytes (2)
- pre-ionization (2)
- reconstruction (2)
- solar EUV (2)
- stereoscopy (2)
- surface charges (2)
- topologische Isolatoren (2)
- 4D flow MRI (1)
- 52.27.Lw (1)
- 52.50.Dg (1)
- 52.65.-y (1)
- 52.75.Hn (1)
- 52.80.Hc (1)
- 7755384-6 (1)
- 89.75.Fb (1)
- AFM (1)
- AFM-Kraft-Abstandskurven (1)
- AOM (1)
- ARPES (1)
- ASDEX (1)
- ASDEX Upgrade (1)
- Ab-initio-Rechnung (1)
- Abregung (1)
- Absorption Spectroscopy (1)
- Aktivität <Konzentration> (1)
- Alfven (1)
- Alfvén Waves (1)
- Algorithm (1)
- Algorithmen (1)
- Algorithmus (1)
- Aluminium Cluster (1)
- Aluminium cluster (1)
- Aminogruppe (1)
- Aminogruppen (1)
- Anode (1)
- Antikoagulans (1)
- Antrieb (1)
- Argon metastables (1)
- Artificial nerual networks (1)
- Astrophysik (1)
- Atmospheric pressure plasma (1)
- Atmosphärendruckentladung (1)
- Atomabsorptionsspektroskopie (1)
- Atomemissionsspektroskopie (1)
- Atomgewicht (1)
- Atomspektrum (1)
- Auftrittsgröße (1)
- BAM (1)
- Barium (1)
- Bayes'sche Datenanalyse (1)
- Bayes-Verfahren (1)
- Bayesian Data Analysis (1)
- Beam (1)
- Biasing (1)
- Binäres Gemisch (1)
- Biomechanics (1)
- Biomembran (1)
- Biomolecules (1)
- Blei (1)
- Bogenentladung (1)
- Boltzmann equation (1)
- Bootstrap current (1)
- Bose-Einstein Kondensation (1)
- Bose-Einstein condensation (1)
- Bose-Einstein-Kondensation (1)
- Brennstoffzelle (1)
- Brewster angle microscopy (1)
- Bündelbildung (1)
- Bürstenpolymere (1)
- CD Spektroskopie (1)
- Cadmium (1)
- Cavity Enhanced Absorption Spectroscopy (1)
- Cavity Ring-Down Spectroscopy (1)
- Cavity-Enhanced-Absorptionsspektroskopie (1)
- Cavity-Ring-Down-Spektroskopie (1)
- Cell biophysics (1)
- Cell cultures (1)
- Cell mechanics (1)
- Cell processes and subcellular processes (1)
- Cells (1)
- Cluster beam (1)
- Cluster charge (1)
- Cluster flow (1)
- Cluster formation (1)
- CoFeB (1)
- Coatings (1)
- Coil Optimization (1)
- Collisions (1)
- Colloidal Probe Technique (1)
- Complex plasma (1)
- Computersimulation (1)
- Connection length (1)
- Correlation Analysis (1)
- DBD (1)
- DIT (1)
- DNA (1)
- De-Excitation (1)
- Dense Plasmas (1)
- Density (1)
- Destabilisierung (1)
- Detachment (1)
- Diagnostik (1)
- Diamant (1)
- Dichte Plasmen (1)
- Dichtematrix (1)
- Dielectric Barrier Discharge (1)
- Dielektrische Entladung (1)
- Digital Ion Trap (1)
- Digital ion trap (1)
- Digitale Ionenfalle (1)
- Diodenlaser mit externem Resonator (1)
- Dirac-cone physics (1)
- Direct Force Measurement (1)
- Dispersion function (1)
- Dispersionsrelation (1)
- Dissipation (1)
- Domänen-Wachstum (1)
- Doppler cooling (1)
- Drift-Diffusions-Modell (1)
- Driftwellen (1)
- Duennschichten (1)
- Durchbruch (1)
- Dust acoustic waves (1)
- Dusty Plasma (1)
- Dusty plasma (1)
- Dämpfung (1)
- Dünne Filme (1)
- Dünne Schicht (1)
- Dünne Schichten (1)
- Dünnes Plasma (1)
- ECDL (1)
- ECRH (1)
- EEDF (1)
- EEVF (1)
- EPR (1)
- Edelgas (1)
- Effluent (1)
- Einmodenlaser (1)
- Eisen-Polypyrrol (1)
- Elastizität (1)
- Electric Propulsion (1)
- Elektrische Polarisation (1)
- Elektrischer Strom / Messung (1)
- Elektrode (1)
- Elektron (1)
- Elektronegative Plasmen / negative Ionen (1)
- Elektronenbad (1)
- Elektronendichte (1)
- Elektronenemission (1)
- Elektronenkinetik (1)
- Elektronenparamagnetische Resonanz (1)
- Elektronenstreuung (1)
- Emission Spectroscopy (1)
- Emissionsentwicklung (1)
- Emitter (1)
- Empfindlichkeit (1)
- Energiereiches Teilchen (1)
- Entropie (1)
- Erosion (1)
- Escape factor (1)
- Ethylenglykol (1)
- ExB-Drift (1)
- ExB-drift (1)
- Expansion (1)
- Exziton (1)
- FCT-Verfahren (1)
- FT-ICR-Spektroskopie (1)
- FTIR (1)
- FTIR-Spektrometrie (1)
- Far (1)
- Fast Particles (1)
- FeSe (1)
- Feldlinienverschmelzung (1)
- Femtosecond lasers (1)
- Fernerkundung (1)
- Finite Systeme (1)
- Finite-element analysis (1)
- Fluid flows (1)
- Fluid-Modellierung (1)
- Fluktuationen (1)
- Fluoreszenz (1)
- Fluorkohlenstoffhaltigen Plasmen (1)
- Fluorocarbon Plasmas (1)
- Flüssigkeiten (1)
- Fourier analysis (1)
- Fusion , Plasma , Plasmaphysik (1)
- Fusion plasma (1)
- Fusion plasmas (1)
- F‐actin (1)
- GID (1)
- GPU computing (1)
- GaAs sputtering (1)
- Gallium (1)
- Gallium-Oxide (1)
- Galliumoxid (1)
- Gas Cell (1)
- Gasaufzehrung (1)
- Gaselektronik (1)
- Gasphasenabscheidung (1)
- Gastemperatur (1)
- Gaszelle (1)
- Gaussian beam (1)
- Glass (1)
- Glimmentladungsspektroskopie (1)
- Graphene (1)
- Green-Funktion (1)
- Greenwald (1)
- Group (1)
- Guided Streamer (1)
- Gyro-kinetic Theory (1)
- Gyrokinetik (1)
- H-L back transition (1)
- Hamburg / Deutsches Elektronen-Synchrotron (1)
- Heat flux (1)
- Heat load (1)
- Heat-flux (1)
- Heparin (1)
- Heterostructures (1)
- Heterostrukturen (1)
- High-Precision Mass Spectrometry (1)
- High-Temperature (1)
- Hoch Performanz (1)
- Hochfrequenzentladung (1)
- Hochfrequenzplasma / Plasmadynamik / Interferometrie / Photodetachment / Sauerstoff Plasma (1)
- Hot plasma (1)
- Hy (1)
- Hybrid-Verfahren (1)
- Hybridisierungstheorie (1)
- Hydrogen peroxide (1)
- Hydroperoxyl (1)
- IR-TDLAS (1)
- ISOLDE/CERN (1)
- ISOLTRAP (1)
- Impulsübertragung (1)
- Informationstheorie (1)
- Infrarot (1)
- Infrarotabsorption (1)
- Innere Energie (1)
- Instrumentation for FEL (1)
- Instrumentation for radioactive beams (fragmentation devices, fragment and isotope, separators incl. ISOL, isobar separators, ion and atom traps, weak-beam diagnostics, radioactive-beam ion sources) (1)
- Intermittenz (1)
- Interpenetrierendes polymeres Netzwerk (1)
- Ion Thruster (1)
- Ion Traps (1)
- Ion thrusters (1)
- Ion traps (1)
- Ionenbeschuss (1)
- Ionendichte (1)
- Ionenfallen (1)
- Ionenimplantation (1)
- Ionenstrahlfalle (1)
- Ionentriebwerk (1)
- Ionthruster (1)
- Isothermal Titration Calorimetry (1)
- Jet (1)
- Kalorimetrie (1)
- Katalysator (1)
- Kernmassenmessungen (1)
- Kerr microscopy (1)
- Kinetic Transport Theory (1)
- Kinetic simulation (1)
- Kinetische Gastheorie (1)
- Kinetische Theorie (1)
- Kinetische Transporttheorie (1)
- Kobalt-Polypyrrol (1)
- Kondo effect (1)
- Konformation (1)
- Kontaktmodell (1)
- Kontraktion (1)
- Kontrolle (1)
- Korrespondenzprinzip (1)
- Kraftmikroskopie (1)
- Kreuzkorrelationsspektroskopie (1)
- Kupfer-Release (1)
- Kupfer-T (1)
- Kupferoxid <Kupfer(I)oxid> (1)
- Kupferoxid <Kupfer(II)-oxid> (1)
- Künstliche Intelligenz (1)
- LE/LC phase transition (1)
- Laboratory experiment (1)
- Laboratory procedures (1)
- Laborexperiment (1)
- Ladungsdichtewelle (1)
- Ladungstransfer (1)
- Lamellare Phase (1)
- Laminar flows (1)
- Langmuir Monolayers (1)
- Langmuir probe (1)
- Langmuir probe diagnostics (1)
- Langmuir-Blodgett and Schaefer techniques (1)
- Langmuir-Sonde (1)
- Laser spectroscopy (1)
- Laser-Cluster-Wechselwirkung (1)
- Laser-cluster interaction (1)
- Laser-induced fluoresence (LIF) (1)
- Laserdiod (1)
- Laserdurchstimmung (1)
- Laserheizung (1)
- Laterale Selbststrukturierung, Polyelektrolyt, Multischicht (1)
- Least-squares method (1)
- Leuchtwerbung (1)
- Lichtstreuung (1)
- Linienprofilfunktion (1)
- Lipid monolayers (1)
- Lipid-Monoschichten (1)
- Lipid-Oxidation (1)
- Lokale-Feld-Näherung (1)
- Lokale-Mittlere-Energie-Näherung (1)
- Low temperature plasma (1)
- Luftleuchten (1)
- L–H transition (1)
- MG-63 (1)
- MG-63 Zellen (1)
- MG-63 cells (1)
- MIR-Spektroskopie (1)
- Machine learning (1)
- Madden-Julian Oscillation (1)
- Magnetfelddiagnostik (1)
- Magnetic edge properties (1)
- Magnetic field diagnostics (1)
- Magnetic fields (1)
- Magnetic reconnection (1)
- Magnetische Rekonnektion (1)
- Magnetischer Einschluss (1)
- Magnetischer Sensor (1)
- Magnetismus (1)
- Magnetized (1)
- Magnetron sputtering (1)
- Marangoni flow (1)
- Mass Specrtometry (1)
- Mass spectrometers (1)
- Mass spectrometry (1)
- Massenspektroskopie (1)
- Master-Gleichung (1)
- Mathematische Modellierung (1)
- Matrix (1)
- Mechanical properties (1)
- Mechanical stress (1)
- Mechanik (1)
- Mehrfach negativ geladene (1)
- Mehrschichtsystem (1)
- Metall-Isolator-Phasenumwandlung (1)
- Metall-Polymer Verbindungen (1)
- Metalle (1)
- Microfluidic devices (1)
- Microfluidics (1)
- Microgravity (1)
- Microwave interferometry / Electron density / Laserphotodetachment (1)
- Mid-IR absorption spectroscopy (1)
- Mie-Theorie (1)
- Mikrofluidik , Mechanik , Zelle , Holographie , Hologramm , Deformation , Biomedizin , Bluttransfusion , Cytometrie , Viskoelastizität (1)
- Mikroplasma (1)
- Mikrowelleninterferometer (1)
- Mikrowellenplasma (1)
- Mineral (1)
- Model Membranes (1)
- Modell (1)
- Modellbildung (1)
- Moden (1)
- Modendynamik (1)
- Modenübergang (1)
- Molecular Kinetics (1)
- Molekulardynamik (1)
- Molekülkinetik (1)
- Multireflexionsflugzeitmassenspektrometrie (1)
- Multischicht (1)
- Multiterm (1)
- N incorporation (1)
- NBI (1)
- NEXT (1)
- NIR-Spektroskopie (1)
- Nachstellungsszenarien (1)
- Nachtluftleuchten (1)
- Nanocluster (1)
- Nanokompositschichten (1)
- Nanoparticles (1)
- Nanoplasmamodell (1)
- Negative ion (1)
- Neoclassical transport (1)
- Nerve cells (1)
- Neutral Beam Injection (1)
- Neutralisation (1)
- Neutralization (1)
- Neutrino (1)
- Neutronenreflektometrie (1)
- Neutronenschalenabschluss (1)
- Neutronenstern (1)
- Nichtgleichgewicht (1)
- Nichtisothermisches Plasma (1)
- Nichtlineare Dynamik (1)
- Niederdruckentladung (1)
- Niederdruckplasma (1)
- Niedertemperatur-Plasma (1)
- Nuclear Structure (1)
- Nuclear fusion (1)
- Nukleosynthese (1)
- OLR-based MJO Index (1)
- OMI (1)
- Oberfläche (1)
- Oberflächenkräfte (1)
- Oberflächenladung (1)
- Oberflächenladungen (1)
- Oberflächenmodifizierung (1)
- Oberflächenstöße (1)
- Operante Konditionierung (1)
- Oxidative stress (1)
- P3M (1)
- PDADMA (1)
- PECVD (1)
- PECVD-Verfahren (1)
- PEI,PDADMA,PSS,surface forces,atomic force microscopy, colloidal probe (1)
- PIC (1)
- PSS (1)
- PVD (1)
- PWV (1)
- Parallelstrom (1)
- Particle flux (1)
- Particle in Cell Simulation (1)
- Particle-in-Cell (1)
- Particle-in-cell (1)
- Particle-in-cell method (1)
- Paul-Falle (1)
- Penning Trap (1)
- Penning-Falle (1)
- Permeationsbarriere (1)
- Phase transitions (1)
- Phasenübergänge (1)
- Phaseresolved Diagnostic (1)
- Phospholipide (1)
- Phospholipids (1)
- Photoströme (1)
- Plasma , Plasmaphysik , Laser , Fluoreszenz , Interferometer , Wakefield , CERN , Kielfeld-Beschleuniger , Teilchenbeschleuniger , Laserinduzierte Fluoreszenz (1)
- Plasma , Plasmaphysik , Tokamak , Stellarator , Magnetohydrodynamik , Kinetische Theorie , Simulation , Alfvén-Welle , Energiereiches Teilchen (1)
- Plasma / Turbulenz (1)
- Plasma Chemistry (1)
- Plasma Instability (1)
- Plasma Modeling (1)
- Plasma Surface Interaction (1)
- Plasma diagnostics (1)
- Plasma diagnostics techniques and instrumentation (1)
- Plasma dynamics (1)
- Plasma medicine (1)
- Plasma surface interaction (1)
- Plasma-Flüssigkeits-Wechselwirkung (1)
- Plasma-Immersions-Implantation (1)
- Plasma-Oberflächen-Wechselwirkung (1)
- Plasma-wall interaction (1)
- Plasmainstabilität (1)
- Plasmajet (1)
- Plasmanitrieren (1)
- Plasmaschwingung (1)
- Plasmasimulation (1)
- Plasmasonde (1)
- Plasmaspektroskopie (1)
- Plasmastrom (1)
- Plasmatheorie (1)
- Plasmatransport (1)
- Plasmawelle (1)
- Plasmonik (1)
- Pockels-Effekt (1)
- Pockels-effect (1)
- Polarisation (1)
- Polaron (1)
- Polyanionen (1)
- Polyanions (1)
- Polydimethylsiloxan (1)
- Polyelektrolytbürste (1)
- Polyethylenglykole (1)
- Polyethylenimin (1)
- Polymer (1)
- Polystyrolsulfonate (1)
- Potenzialhyperfläche (1)
- Power decay (1)
- Proteine (1)
- Präzisionsmassenmessung (1)
- Python (1)
- QCLAS (1)
- Quadrupole mass filter (1)
- Quantendot (1)
- Quantenkaskadenlaser (1)
- Quantenmechanik (1)
- Quantenphasenübergang (1)
- Quantenpunkt (1)
- Quantentheorie (1)
- Quantum Cascade Laser (1)
- Quecksilber (1)
- RF Plasma (1)
- RF mass Spectrometry (1)
- RF-Entladung (1)
- ROS, cell and mitochondria mechanics (1)
- Radial axis shift (1)
- Radialverteilung (1)
- Radikal (1)
- Radioactive Ion Beams (1)
- Radioaktivität (1)
- Radiofrequenz (1)
- Radionuklide (1)
- Rasterkraftmikroskop (1)
- Reaktionsdynamik (1)
- Reaktive Sauerstoffspezies (1)
- Reaktives Sputtern (1)
- Reflektometer (1)
- Reinforcement learning (1)
- Relativistische Quantenmechanik (1)
- Relaxationskinetik (1)
- Renormalization (1)
- Robust (1)
- Rohstoffgewinnung (1)
- Rotational transform (1)
- Rydberg excitons (1)
- Röntgen-Photoelektronens (1)
- Röntgenbeugung (1)
- Röntgendiffraktion (1)
- Röntgenreflektivität (1)
- S/XB coefficient (1)
- Schadstoffabbau (1)
- Schalenabschluss (1)
- Schaumflotation (1)
- Schlieren (1)
- Schnelles Teilchen (1)
- Schnittstelle (1)
- Schutzschicht (1)
- Schwerelosigkeit (1)
- Scrape-off layer width (1)
- Scraper (1)
- Secondary Electrons (1)
- Seebeck effect (1)
- Self-absorption (1)
- Self-patterning, polyelectrolyte, multilayers (1)
- Shape dynamics (1)
- Sheath transmission coefficient (1)
- Signal-to-noise ratio (1)
- Silber (1)
- Simulationsexperiment (1)
- Spectral imaging (1)
- Spectroscopy (1)
- Spin Trap (1)
- Spin Trapping (1)
- Spintronic devices (1)
- Spintronik (1)
- Spot (1)
- Sputterdeposition (1)
- Sputtering (1)
- Sputtern (1)
- Stark gekoppelte Systeme (1)
- Startverhalten (1)
- Staub (1)
- Staubdichtewelle (1)
- Staubige Plasmen (1)
- Staubiges Plasma (1)
- Stickstoff-Sauerstoff-Gemisch (1)
- Stickstoffgruppe (1)
- Stochstic Programming (1)
- Stoffwandlung (1)
- Stoß (1)
- Streutheorie (1)
- Strikeline (1)
- Strukturbildung (1)
- Sulfide (1)
- Supervised learning (1)
- Surface Collisions (1)
- Symmetrie (1)
- TDLAS (1)
- THz (1)
- TMCL (1)
- TOF (1)
- Teflon (1)
- Temperatur (1)
- Terahertz radiation (1)
- Terahertz spectroscopy (1)
- Theoretical Physics (1)
- Thermografie (1)
- Thin films (1)
- Thrombozytopenie (1)
- Ti-Cu-N coating (1)
- Time-of-flight mass spectrometry (1)
- Titan Tholins (1)
- Titan-Tholine (1)
- Titanaluminide (1)
- Titanatom (1)
- Titandioxid (1)
- Titanlegierung (1)
- Titannitrid (1)
- Tomographie (1)
- Topologischer Isolator (1)
- Tracer particles (1)
- Tracerpartikel (1)
- Transmission electron microscopy (1)
- Transport (1)
- Transporttheorie (1)
- Turbulente Strömung (1)
- UV-VIS-Spektroskopie (1)
- VUV-Strahlung (1)
- Velocity distribution (1)
- Verdampfung (1)
- Verlustprozess (1)
- Verschränkung (1)
- Verunreinigungstransport (1)
- Vielteilchensystem (1)
- Vielteilchentheorie (1)
- Viscoelastic properties (1)
- Vorionisation (1)
- WSS (1)
- Wand-Abregung-Wahrscheinlichkeit (1)
- Waves (1)
- Wellen (1)
- Wellenmagnetfeld (1)
- Wellenwechselwirkung (1)
- Wendelstein (1)
- Wendelstein 7-x (1)
- Whistlerwelle (1)
- Widerstand <Elektrotechnik> (1)
- Wolfram (1)
- Wärmeschutz (1)
- X-ray photoelectron spectroscopy (1)
- X-ray reflectivity (1)
- Zeeman and Stark effects (1)
- Zeeman- und Stark-Effekte (1)
- Zeitaufgelöste Diagnostik (1)
- Zelle (1)
- Zellmechanik (1)
- Zitterbewegung (1)
- absorption spectroscopy (1)
- actin cytoskeleton (1)
- actin quantification (1)
- adsorption (1)
- airglow (1)
- akusto-optischer Effekt (1)
- alumina (1)
- amino polymer (1)
- aminogroups (1)
- anomal transport (1)
- anomaler Transport (1)
- anti-adhesive surface (1)
- antimatter plasma (1)
- aortic arch (1)
- appearance size (1)
- atherosclerosis (1)
- atmosphere (1)
- atmospheric pressure discharge (1)
- atmospheric pressure plasma (1)
- atomic level scheme (1)
- atomic masses of cesium isotopes (1)
- atomic spectra (1)
- barrier corona (BC) (1)
- binary mixture (1)
- bipolar pulse (1)
- borosilicate (1)
- bundle formation (1)
- calcium ion signaling (1)
- cathode (1)
- cathodes (1)
- cavity QED (1)
- cavity ring-down (1)
- cell adhesion (1)
- cell membrane (1)
- cell spreading (1)
- cell-material interaction (1)
- cell‐surface contacts (1)
- charge measurement (1)
- charge-density-wave (1)
- climate (1)
- closed neutron shell (1)
- cluster (1)
- cobalt-polypyrrole (1)
- cold atmospheric pressure plasmajet (1)
- combination therapy (1)
- complex plasmas (1)
- computer vision (1)
- conductive (1)
- consistent (1)
- contact model (1)
- continuously tuning (1)
- control (1)
- copper nitride (1)
- copper release (1)
- correlation analysis (1)
- coupled phonon-plasmon modes (1)
- cross-correlation spectroscopy (1)
- crystal structure (1)
- cylindrical wave (1)
- data-mining (1)
- density limit (1)
- deposition (1)
- diagnostics (1)
- dice lattice (1)
- dielectric barrier discharge (1)
- dielectric barrier discharge (DBD) (1)
- dielectric response (1)
- dielektrisch behinderte Entladung (1)
- diffusion within multilayers (1)
- dipole magnetic field (1)
- discharge evolution (1)
- discharge mode transition (1)
- disruption (1)
- divertor (1)
- domain growth (1)
- drift waves (1)
- dust (1)
- dust charge (1)
- dust-density waves (1)
- edelmetallfreie Katalysatoren (1)
- electric field (1)
- electric propulsion (1)
- electrochemistry (1)
- electron bath (1)
- electron cyclotron emission (1)
- electron emission (1)
- electron energy loss spectroscopy (1)
- electron kinetics (1)
- electronegativity (1)
- electronic structure (1)
- electron–positron plasma (1)
- ellipsometry (1)
- energetic ion (1)
- energy-resolved ion mass spectrometry (1)
- entanglement (1)
- entropy (1)
- evaporation (1)
- external cavity diode laser (1)
- fast optical and electrical diagnostics (1)
- fdtd (1)
- finite difference in time domain (1)
- finite systems (1)
- flow dynamics (1)
- fluctuations (1)
- fluid modelling (1)
- fluid simulation (1)
- fluorescence (1)
- fluorescent lamp (1)
- fluorescent lamps (1)
- flüssig (1)
- food quality (1)
- forcing (1)
- fractals (1)
- froth flotation (1)
- ftir spectroscopy (1)
- full-wave (1)
- fusion plasma (1)
- gas cell (1)
- gas consumption (1)
- gepulster Betrieb (1)
- glow-like discharge (1)
- glow-to-arc transition (1)
- gyrokinetic (1)
- gyrokinetics (1)
- gyrokinetisch (1)
- heavy actinides (1)
- helicon, fluorescence, accelerator (1)
- helium barrier discharge (1)
- helium–oxygen barrier discharge (1)
- high performance (1)
- high power impulse magnetron sputtering (1)
- high spatial resolution (1)
- hollow cathode discharge (1)
- hot spot (1)
- human osteoblasts (1)
- hybrid method (1)
- hydrogen peroxide (1)
- ignition behavior (1)
- in situ (1)
- in-situ Diagnostik (1)
- inflammatory/immunological response (1)
- infrared spectroscopy (1)
- inhomogeneous plasma (1)
- inhomogenes plasma (1)
- instabilities (1)
- interchange (1)
- intermittency (1)
- internal energy (1)
- intramuscularly implantation (1)
- intraseasonal variation (1)
- ion accelerator (1)
- ion composition (1)
- ion drag (1)
- ion traps (1)
- ion-beam trap (1)
- ionenwind (1)
- ionosphere modeling (1)
- ipf-fd3d (1)
- iron based superconductors (1)
- iron-polypyrrole (1)
- isotherms (1)
- jet (1)
- kinetic modelling (1)
- konsistent (1)
- lamellar phase (1)
- laser atomic absorption (1)
- laser heating (1)
- laser photodesorption (1)
- layer-by-layer (1)
- leafy greens (1)
- lebensdauerabhängige Auftrittsgrößen (1)
- leitfähig (1)
- lifetime-depentend appearance size (1)
- line profile function (1)
- lipid domain growth (1)
- lipid monolayer (1)
- lipid oxidation (1)
- liquid (1)
- local-field-approximation (1)
- local-mean-energy-approximation (1)
- loss process (1)
- low-temperature plasma (1)
- low-temperature plasma polymerization (1)
- low‐temperature plasma (1)
- magic number (1)
- magische Zahlen (1)
- magnesia (1)
- magnetic characterization methods (1)
- magnetic field (1)
- magnetic materials (1)
- magnetic microscopy (1)
- magneto-hydrodynamic equilibrium (1)
- magneto-optical effects (1)
- magneto-optics (1)
- magnetron sputtering discharge (1)
- mass spectrometer (1)
- mass spectrometry (1)
- mathematical modeling (1)
- medical gas plasma technology (1)
- melamine-formaldehyde (1)
- mercury-free (1)
- metal polymer structures (1)
- metal-insulator transition (1)
- microcontact printing (1)
- microdischarge (1)
- microfluidics, cell mechanics, cells, holography, hologram, deformation, biomedicine, transfusion medicine, cytometry, viscoelasticity (1)
- microgravity research (1)
- microinstabilities (1)
- microinstabilitäten (1)
- microplasma (1)
- microwave-driven discharge (1)
- mimic scenario (1)
- mixed-valence correlations (1)
- mode dynamics (1)
- modeling (1)
- modern experimental methods (1)
- molecular ion formation (1)
- monolayer (1)
- mouse (1)
- multilayer composition (1)
- multilayers (1)
- multiterm (1)
- multiview geometry (1)
- mutlinucleon transfer (1)
- nanoparticles (1)
- nanosecond-pulsed streamer (1)
- nanowire (1)
- negative Ionen (1)
- nematicity (1)
- neoclassic (1)
- neoklassisch (1)
- networks (1)
- neural (1)
- neuron-rich calcium isotopes (1)
- neutral recycling (1)
- neutron reflectometry (1)
- neutron-rich nuclei (1)
- nicht-Hermitizität (1)
- nichtlinear (1)
- nightglow (1)
- nitrogen metastables (1)
- nitrogen-oxygen gas mixtures (1)
- non noble metal catalysts (1)
- non-Hermitian (1)
- non-equilibrium (1)
- non-thermal processing (1)
- nonlinear dynamics (1)
- nuclear mass measurements (1)
- numerische simulation (1)
- offene Quantensysteme (1)
- oncology (1)
- open quantum systems (1)
- optical diagnostics (1)
- optical emission and absorption spectroscopy (1)
- optical emission spectroscopy (1)
- optomechanics (1)
- osteoblasts (1)
- oxidation processes (1)
- pair plasma (1)
- parallel current (1)
- paramagnetic particles (1)
- partial discharge (PD) (1)
- partial mutual information (1)
- particle (1)
- particle tracking (1)
- particle transport (1)
- particle-in-cell (1)
- patterned discharge (1)
- penning trap mass spectrometer ISOLTRAP (1)
- permeation barrier (1)
- permutation (1)
- phase resolved surface charge measurement (1)
- phase separation (1)
- phonon localization (1)
- phonon propagation (1)
- photocurrent (1)
- photodetachment spectroscopy (1)
- phototdissociation (1)
- pinch (1)
- plaque characteristics (1)
- plasma applications (1)
- plasma confinement (1)
- plasma current (1)
- plasma devices (1)
- plasma diagnostic (1)
- plasma dynamics (1)
- plasma in liquids (1)
- plasma instabilities (1)
- plasma jet (1)
- plasma material processing (1)
- plasma modeling (1)
- plasma physics (1)
- plasma science and technology (1)
- plasma sheaths (1)
- plasma simulation (1)
- plasma theory (1)
- plasma-fluorocarbon-polymer (1)
- plasma-liquid-interaction (1)
- platelet biomechanics (1)
- platelet cytoskeleton (1)
- plume (1)
- pollution control (1)
- polyelectrolyte (1)
- polymer (1)
- positive Säule (1)
- positive column (1)
- positively biased anode (1)
- positron beam (1)
- precision mass measurements (1)
- pulse length dependence (1)
- pulsed laser deposition (1)
- pulsed operation (1)
- pulsed power (1)
- pump-probe spectroscopy (1)
- quantum cascade laser (1)
- quantum corrections (1)
- quantum phase transition (1)
- quasi-two-dimensional systems (1)
- quecksilberfrei (1)
- r-Prozess (1)
- radial distribution (1)
- radiation detection (1)
- radio frequency discharge (1)
- radioactive nuclei (1)
- radionuclides (1)
- reactive mode (1)
- reactive oxygen and nitrogen species (1)
- reactive oxygen species (1)
- ready-to-eat produce (1)
- real‐time deformability cytometry (1)
- remote (1)
- resistive ballooning (1)
- resonance ionization (1)
- resonant state (1)
- resonanter Zustand (1)
- retrieval (1)
- roadmap (1)
- rule changes (1)
- scanning ion conductance microscopy (1)
- scattering processes (1)
- schnelle optische und elektrische Diagnostik (1)
- scrape-off layer (1)
- secondary electron emission (1)
- secondary electron emission coefficient (1)
- secondary electrons (1)
- seed electrons (1)
- self-assembly (1)
- semi-empirical (1)
- sensitivity (1)
- separatrix (1)
- shear flow (1)
- short-lived nuclides (1)
- similarity laws (1)
- similarity scaling (1)
- simulation (1)
- simulations (1)
- single mode (1)
- skyrmions (1)
- soft matter (1)
- solar variability (1)
- solenoid separator (1)
- solid-state physics (1)
- space charge (1)
- species conversion (1)
- spin-polarized current (1)
- spot (1)
- statistical analysis (1)
- strain fields (1)
- strong correlations (1)
- superconductivity (1)
- superoxide anion (1)
- superposed epoch analysis (1)
- supported lipid bilayers (1)
- surface charge sensing (1)
- surface double layer (1)
- surface electrons (1)
- surface forces (1)
- surface physics (1)
- symmetry (1)
- teflon-like (1)
- temperatur (1)
- temperature (1)
- terahertz ellipsometry (1)
- terahertz emission spectroscopy (1)
- terahertz spintronics (1)
- terahertz time‐domain spectroscopy (1)
- terahertz transmission spectroscopy (1)
- theoretical description and modelling (1)
- thermionische Emission (1)
- thermography (1)
- thermosphere (1)
- thin film deposition (1)
- thin films (1)
- thrusters (1)
- time-correlated single photon counting (TC-SPC) (1)
- time-resolved optical emission spectroscopy (1)
- titanium (Ti) alloys (1)
- titanium surface modification (1)
- topological insulator (1)
- topological insulators (1)
- transient spark (1)
- transport (1)
- transport coefficients (1)
- tumor immunology (1)
- tunable diode laser absorption spectroscopy (1)
- tungsten (1)
- two-photon absorption laser-induced fluorescence (1)
- ultra-thin (1)
- ultradünn (1)
- ultrafast spincaloritronics (1)
- ultrafast spintronics (1)
- valleytronics (1)
- vision (1)
- voltage stabilization (1)
- wave interaction (1)
- wave magnetic field (1)
- weather forecasting (1)
- wettability (1)
- wetted area (1)
- whistler wave (1)
- xenon (1)
- zeta potential (1)
- zylindrische Welle (1)
- Überwachtes Lernen (1)
Institute
- Institut für Physik (274) (remove)
Publisher
- IOP Publishing (63)
- MDPI (13)
- Copernicus (7)
- AIP Publishing (5)
- Frontiers Media S.A. (4)
- Wiley (4)
- American Physical Society (APS) (3)
- Springer Nature (3)
- Cambridge University Press (2)
- European Geosciences Union (2)
In this thesis we have revisited the formation of the excitonic insulator (EI), which realizes an exciton condensate. In contrast to optically created exciton condensates, the EI forms in thermal equilibrium and is solely driven by the Coulomb attraction between electrons and holes. The EI phase is anticipated to occur near the semimetal-semiconductor (SM-SC) transition at low temperatures. Depending from which side the EI is approached, it forms due to a BCS-type condensation of electron-hole pairs or a Bose-Einstein condensation (BEC) of excitons. The extended Falicov-Kimball model (EFKM) is the minimal model the EI can be described with. This model describes spinless fermions in two dispersive bands (f band and c band), that interact via a local Coulomb repulsion. The EFKM is also used to describe electronic ferroelectricity (EFE). Both phases, the EI and EFE-type ordering, are characterized by a spontaneous f-c hybridization in the EFKM. We have presented the EI phase, the EFE phase, and the orderings they compete with. Moreover, we have determined the ground-state phase diagram of the EFKM. We have focused particularly on the anticipated BCS-BEC crossover within the EI and have analyzed the formation scenarios. The exciton spectrum and the exciton density in the normal phase close to the critical temperature give information about relevant particles and therefore the nature of the transition. We have demonstrated that the whole EI is surrounded by a halo", that is, a phase composed of electrons, holes and excitons. However, on the SM side, only excitons with a finite momentum exist. These excitons appear only in a small number and barely influence the SM-EI transition. This phase transition is driven by critical electron-hole fluctuations, generated by electrons and holes at the Fermi surface. On the SC side, excitons with arbitrary momenta exist. Most notably, we have found the number of zero-momentum excitons to diverge at the SC-EI transition, signaling the BEC of these particles. Within the EI phase, there is a smooth crossover from the BCS regime to the BEC regime. One of the promising candidates to observe the EI experimentally, is the transition-metal dichalcogenide 1T-TiSe2. Strong evidences were found favoring an EI scenario of the charge-density-wave (CDW) formation in this material. However, some aspects point to a lattice instability to drive the CDW transition. We have addressed this issue by analyzing the recently discovered chiral property of the CDW in 1T-TiSe2. We have found that the EI scenario is insufficient to explain a stable, long range chiral charge ordering. Lattice degrees of freedom must be taken into account. In particular, nonlinear electron-phonon coupling and phonon-phonon interaction are crucial. By estimating appropriate model parameters for 1T-TiSe2, we have suggested a combination of excitonic and lattice instability to drive the CDW transition in this material. Experiments in 1T-TiSe2 and other materials suggest that the coupling to the lattice is non-negligible. We have extended therefore the model by an explicit exciton-phonon interaction, and have analyzed crucial effects of this interaction. While the single-particle spectrum is not modified qualitatively, the electron-hole pair spectrum changes significantly. The inclusion of the phonons lead to a massive collective mode in the ordered ground state in contrast to the case for vanishing exciton-phonon coupling, where the mode is acoustic. We have suggested that a gapless collective mode leads to off-diagonal long range order. This questions that the ground state for finite exciton-phonon coupling represents a condensate.
The region surrounding the excitonic insulator phase is a three-component plasma composed of electrons, holes, and excitons. Due to the extended nature of the excitons, their presence influences the surrounding electrons and holes. We analyze this correlation. To this end, we calculate the density of bound electrons, the density of electrons in the correlated state, the momentum-resolved exciton density, and the momentum-resolved density of electron-hole pairs that are correlated but unbound. We find qualitative differences in the electron-hole correlations between the weak-coupling and the strong-coupling regime.
In the present thesis, a systematic study of beam driven Alfvén eigenmodes in high-density and low-temperature plasmas of the W7-AS stellarator is performed. The device went out of operation in 2002 and the study is based on stored experimental data. Alfvén instabilities can roughly be divided into ideal MHD Alfvén eigenmodes and those existing due to kinetic effects. The spectrum of ideal MHD Alfvén waves in toroidal fusion devices consists of a continuum of stable waves that are strongly localized. Weakly damped, discrete eigenmodes can exist in gaps of the continuous spectrum which are formed by plasma inhomogeneities and the coupling of Alfvén continua. This allows an identification of ideal MHD Alfvén eigenmodes in terms of their frequency and mode numbers. Kinetic effects can modify this spectrum and cause additional types of eigenmodes, the kinetic Alfvén eigenmodes (KAE) and energetic particle modes (EPM). The goal of this thesis is twofold: (I) identification and description of fast particle driven Alfvén instabilities in W7-AS, and (II) study of energetic particle losses induced by Alfvén instabilities. The reconstruction of the ideal MHD plasma equilibrium for each discharge with sufficient accuracy is the very foundation of all subsequent steps. This is achieved, based on measured plasma parameter profiles that are further refined by validating them to the measurements of other, independent plasma diagnostics. The applied scheme is inspired by an approach of Integrated Data Analysis (IDA) to combine different diagnostic data and provide combined uncertainties. After mode number analysis and eigenmode identification, the theoretically expected, linear growth rate of the instability is calculated where possible, and the various contributions of the fast particle drive to the instability of the mode are identified. Alfvénic activity recorded by the Mirnov diagnostic is analyzed, which consists of a set of spatially distributed coils that measure magnetic fluctuations. On W7-AS, the probes are arranged in three poloidal arrays at different toroidal positions. The spacing between the probes is non-equidistant. In addition, the signals of one probe array are digitized with a different sample rate. These characteristics prohibit the straight-forward use of standard tools available for harmonic analysis. Instead, a new tool has been developed and thoroughly tested. It is a multi-dimensional extension of the Lomb periodogram, able to provide reliable time-resolved frequency and mode number spectra in the case of uneven datapoint spacing. Numerical studies of this periodogram show a good performance with respect to mode number resolution given the low number of available probes, and robustness against perturbations of the signal. Only two of the probe arrays can be used for the analysis of eigenmodes with frequencies >70 kHz, such that for high-frequency phenomena insufficient information about the mode numbers is available. A total of 133 different Alfvén eigenmodes is studied in discharges from different experimental campaigns. A restriction to discharges from various high-beta campaigns with neutral beam heating is required to allow for a realistic reconstruction of plasma equilibrium and velocity distribution functions of energetic particles. The discharges are characterized by high density, ne = 5 x 1019 m-3 to 2.5 x 1020 m-3 at relatively low temperatures of Te = Ti = 150 ... 600 eV. Alfvén eigenmodes often appear transiently in the startup phase of these discharges, where density and heating power are being ramped up. Occasionally, Alfvén eigenmodes are seen in the stationary, high-beta phase in the presence of considerable neutral beam heating. Most of the Alfvén eigenmodes are successfully classified as ideal MHD eigenmodes. 19 global, 47 toroidicity-induced and 8 ellipticity-induced Alfvén eigenmodes (GAEs, TAEs, and EAEs, respectively) are unambiguously identified by their mode numbers and frequencies. Excellent agreement between experimentally observed mode number spectra and theoretically calculated eigenmode structure is shown for a TAE example. Additional 13 events are found to have frequencies inside the EAE gap and could possibly be EAEs. Evidence for high-frequency Alfvén eigenmodes (mirror- and helicity-induced Alfvén eigenmodes) is seen, but can not be proven rigorously due to uncertain mode numbers and the complexity of the Alfvén continuum. The remaining 41 Alfvén eigenmodes can not be classified to be one of the above cases. Reasons are either high frequencies, mode numbers obscured by far-field effects, or mode numbers that could not be related to ideal MHD Alfvén eigenmodes. A selection of these shows indications of strong non-linear wave-particle interactions and are assumed to be EPMs. Kinetic Alfvén eigenmodes are not expected to exist in the experimental conditions that were studied. The radially resolved velocity distribution function is used to describe the parameter regimes in which the modes are observed in terms of the dimensionless parameters vb/vA (beam velocity normalized to the Alfvén velocity) and ßfast/ßth, where beta is the ratio of plasma pressure to magnetic pressure. The first parameter describes through which of the possible resonance velocities particles can interact with the eigenmode. A peculiarity of the fast particle dynamics in fusion devices is that they can resonantly interact with Alfvén eigenmodes through sideband resonances even if v < vA. The second parameter describes the energy content of the destabilizing fast particle population compared to the potentially stabilizing thermal plasma component. These parameters contain relevant information about the instability of an eigenmode and such diagrams are given for all observed modes. In addition to that, the expected linear growth rate of gap modes is calculated based on a theoretical model that extends the ideal MHD by a perturbative, drift-kinetic description of the energy exchange between waves and circulating particles, neglecting the effects of trapped particles. For the discharges under consideration the thermal electron speed is comparable to vA and the electrons provide a significant Landau damping contribution. Due to strong density gradients near the plasma boundary in most of the discharges, the thermal ions can provide a small drive via the spatial inhomogeneity which does not overcome the electron damping, however. The drive by spatial inhomogeneity of thermal ions requires a certain propagation direction of the mode and is equally stabilizing for opposite mode numbers. The fast particles also contribute to the growth rate via spatial inhomogeneity, velocity gradients and velocity anisotropy terms are negligible in W7-AS. Most of the observed GAE or EAE modes have negative mode numbers, which correspond to a propagation direction for which the spatial inhomogeneity of thermal and beam ions is predicted to be stabilizing. A fast particle drive of these modes is not confirmed, whereas the TAEs are found to be strongly destabilized by neutral beam injection. The distribution of plasma parameters for discharges showing TAEs in terms of the dimensionless stability parameters suggests an instability threshold that is qualitatively confirmed by an exploration of the parameter space with the theoretical model. Wave-induced, resonant losses of energetic ions scale linearly with the wave amplitude. To identify them, correlations between ion loss probe signals and wave amplitudes are searched, where correlation times in the order of the slowing-down time of energetic particles are expected. Significant correlations can be established only exceptionally for 3 of the identified ideal MHD Alfvén eigenmodes. Those Alfvén eigenmodes, however, which are assumed to be EPMs frequently show severe losses of energetic ions that are visible in the time traces of the plasma energy as well.
The collisionless tearing mode is investigated by means of the delta-f PIC code EUTERPE solving the gyrokinetic equation. In this thesis the first simulations of electromagnetic non-ideal MHD modes in a slab geometry with EUTERPE are presented. Linear simulations are carried out in the cases of vanishing and finite temperature gradients. Both cases are benchmarked using a shooting method showing that EUTERPE simulates the linearly unstable tearing mode to a very high accuracy. In the case of finite diamagnetic effects and values of the linear stability parameter Delta of order unity analytic predictions of the linear dispersion relation are compared with simulation results. The comparison validates the analytic results in this parameter range. Nonlinear single-mode simulations are performed in the small- to medium-Delta range measuring the dependency of the saturated island half width on the equilibrium current width. The results are compared with an analytic prediction obtained with a kinetic electromagnetic model. In this thesis the first simulation results in the regime of fast nonlinear reconnection~(medium- to high-Delta range) are presented using the standard gyrokinetic equation. In this regime a nonlinear critical threshold has been found dividing the saturated mode from the super-exponential phase for medium-Delta values. This critical threshold has been proven to occur in two slab equilibria frequently used for reconnection scenarios. Either changing the width of the equilibrium current or the wave number of the most unstable mode makes the threshold apparent. Extensive parameter studies including the variation of the domain extensions as well as the equilibrium current width are dedicated to a comprehensive overview of the critical threshold in a wide range of parameters. Additionally, a second critical threshold for high-Delta equilibria has been observed. A detailed comparison between a compressible gyrofluid code and EUTERPE is carried out. The two models are compared with each other in the linear regime by measuring growth rates over wave numbers of the most unstable mode for two setups of parameters. Analytical scaling predictions of the dispersion relation relevant to the low-Delta regime are discussed. Employing nonlinear simulations of both codes the saturated island half width and oscillation frequency of the magnetic islands are compared in the small-Delta range. Both models agree very well in the limit of marginal instability and differ slightly with decreasing wave vector. Recently, the full polarisation response in the quasi-neutrality equation was implemented in EUTERPE using the Padé approximation of the full gyrokinetic polarisation term. Linear simulation results including finite ratios of ion to electron temperature are benchmarked with the dispersion relation obtained from a hybrid model. Finite temperature effects influence the saturated island width slightly with increasing ion to electron temperature ratio which has been verified by both models.
Optomechanical (om) systems are characterized by their nonlinear light-matter interaction. This is responsible for unique dynamic properties and allows the detection of a variety of classical and quantum mechanical phenomena on a microscopic as well as on a macroscopic scale. In this work we have studied the dynamic behavior of two laser-driven om systems, the single om cell ("cavity optomechanics / membrane-in-the-middle setup") and a two-dimensional hexagonal array of these cells ("om graphene"). The first case was motivated by the possibility to detect the transition from quantum mechanics to classical mechanics directly on the basis of the dynamic behavior. For this we focus on multistability effects of the optical and mechanical degrees of freedom, that are modeled by harmonic oscillators. Our description is based on the quantum optical master equation, which takes into account the environmental interaction assuming a vanishing temperature. As a consequence of decoherence, the dynamics occur near the semiclassical limit, i.e. it is characterized by quantum fluctuations. The quantum-to-classical transition is realized formally by rescaling the equations of motion. In the classical limit, quantum fluctuations disappear and the mean field equations were evaluated by analytical and numerical methods. We found that classical multistability is characterized by stationary signatures on the route to chaos, as well as by the coexistence of single-periodic orbits for the mechanical degree of freedom. The latter point was extensively evaluated by means of a self-consistent approach. For the dynamics in the quantum regime quantum fluctuations cannot be neglected. For this purpose, the master equation was solved by means of a numerical implementation of the Quantum State Diffusion (QSD) method. Based on Wigner and autocorrelation functions, we were able to show that quantum multistability is a dynamic effect: chaotic dynamics is suppressed and there is a time-dependent distribution of the phase space volume on classical simple-periodic orbits. The results can be interpreted within a semiclassical picture, which makes use of the single QSD quantum trajectory. Accordingly, the quantum-classical transition is explained as a time-scale effect, which is determined by tunneling probabilities in an effective mean-field potential. The subject of the second part of the work is the transport of low-energy Dirac quasiparticles in om graphene, propagating as light and sound waves. For this purpose, we investigated the scattering of a plane light wave by laser-induced photon-phonon coupling planar and circular barriers. The starting point is the om Dirac equation, which results from the continuum approximation of the Hamiltonian description of the two-dimensional array near the semiclassical limit. This work was motivated by the rich and interesting relativistic transport and tunneling phenomena found for electrons in graphene, which now appear in a new way. The reason is the presence of the new spin degree of freedom, which distinguishes the optical and mechanical excitations. In this spin space, the om interaction can be understood as a potential, which in our analysis consists of a time-independent and a time-dependent sinusoidal part. For the first case of a static barrier, the transport is elastic and is characterized by stationary scattering signatures. After solving the scattering problem via continuity conditions we were able to identify different scattering regimes depending on scattering parameters. In addition to relativistic phenomena such as Klein tunneling, simple parameter variation allows to use the barrier as a resonant light-sound interconverter and angle-dependent emitter. For the oscillating barrier, the transport is inelastic and is characterized by dynamic scattering signatures. To solve the time-periodic scattering problem, we have applied the Floquet theory for an effective two-level system. As a result of the barrier oscillation, photons and phonons can get and give away energy portions in the form of integer multiples of the oscillation frequency. The interference of short (classical) and long-wave (quantum) components leads to mixing of the scattering regimes. This allows to use the barrier as a time-periodic light-sound interconverter with interesting radiation characteristics. In addition, we have argued that the oscillating barrier provides the necessary energetic conditions for detecting zitterbewegung.
In dieser Arbeit wurden Experimente an einem DC-Magnetron-Beschichtungsplasma zur (reaktiven) Abscheidung von Ti, TiNx und TiOx-Schichten durchgeführt. Das Ziel war es, durch Korrelation von Messungen des Ionen- und des Energieeinstroms auf das Substrat während des Beschichtungsvorgangs mit Analysen der abgeschiedenen Schichten Aussagen über die Zusammenhänge von Abscheidebedingungen und Schichteigenschaften zu treffen. Von besonderem Interesse waren hierbei die Unterschiede zwischen den beiden Betriebsmodi des eingesetzten Magnetrons (balanced mode und unbalanced mode), da sich über diesen Parameter der Ioneneinstrom auf das Substrat signifikant beeinflussen lässt, sowie der Einfluss hochenergetischer negativ geladener Ionen, die beim Einsatz von Sauerstoff im Gegensatz zu dem von Stickstoff als Reaktivgas auftreten. Die Maxima der mittels energieaufgelöster Massenspektrometrie gemessenen Energieverteilungen aller Ionenspezies liegen im unbalanced mode im Vergleich zum balanced mode bei um etwa 0,2...1 eV höherer Energie. Der im Wesentlichen von den einfach positiv geladenen Argonionen und bei hohem Reaktivgasfluss den molekularen Reaktivgasionen getragene Gesamtioneneinstrom auf das Substrat ist im unbalanced mode deutlich höher als im balanced mode. Der mit Hilfe einer Thermosonde gemessene Energieeinstrom auf das Substrat steigt linear mit der Entladungsleistung an. Im unbalanced mode ist er, bedingt durch den höheren Gesamtioneneinstrom auf das Substrat und die größere mittlere Energie aller Ionenspezies, um mehr als eine Größenordnung höher als im balanced mode. Eine Abhängigkeit des Energieeinstroms vom Reaktivgasfluss wurde nicht beobachtet. Die röntgenreflektometrisch gemessenen Beschichtungsraten steigen über der Entladungsleistung linear an und sind im unbalanced mode trotz geringerer Sputterraten am Target um ca. 10...20 % höher als im balanced mode. Die Begründung hierfür liefert der im unbalanced mode deutlich höhere Energieeinstrom auf das Substrat. Durch diesen erhöhten Energieeintrag in die aufwachsenden Schichten steht im unbalanced mode mehr Energie für Prozesse an der Oberfläche, wie die Oberflächendiffusion, zur Verfügung. Die somit verbesserte laterale Mobilität der Teilchen an der Oberfläche führt dazu, dass diese besser in die wachsende Kristallstruktur eingebaut werden können. Damit ergibt sich letztendlich im unbalanced mode trotz des geringeren Teilcheneinstroms in allen untersuchten Plasmen eine höhere Abscheiderate von Titan auf dem Substrat. Der Energieeinstrom auf das Substrat ist demnach durch seinen signifikanten Einfluss auf die laterale Mobilität der aufwachsenden Teilchen ein bestimmender Parameter für das Schichtwachstum. Die durch die Beimischung von Reaktivgas zum Plasma auftretende Targetnitrierung bzw. –oxidation verursacht ein deutliches Absinken der Sputterraten am Target und damit der Beschichtungsraten über dem Reaktivgasfluss. Messungen der chemischen Zusammensetzungen der Schichten mittels Röntgenphotoelektronenspektroskopie zeigen, dass die Menge des in die Schichten eingebauten Reaktivgases über dessen Konzentration im Beschichtungsplasma zu kontrollieren ist. Im Argon-Stickstoff-Plasma sind die Werte der aus den röntgenreflektometrisch erhaltenen Dichten bei den im unbalanced mode abgeschiedenen Schichten deutlich höher als bei den im balanced mode abgeschiedenen. Untersuchungen mittels Röntgendiffraktometrie zeigen für diese Schichten auch höhere makroskopische Spannungen. Offenbar führt der größere Energieeinstrom hier zu lokalen Temperaturunterschieden, aus denen aufgrund unterschiedlicher Ausdehnungskoeffizienten von Schicht und Substrat beim Abkühlen makroskopische Schichtspannungen resultieren. Insgesamt werden im Argon-Stickstoff-Plasma im unbalanced mode des Magnetrons kompaktere Schichten mit weniger Lücken abgeschieden als unter denselben Bedingungen im balanced mode. Im Argon-Sauerstoff-Plasma wird dieser positive Effekt des höheren Energieeintrags in die aufwachsenden Schichten durch den im unbalanced mode deutlich höheren Beschuss des Substrats mit hochenergetischen negativ geladenen Sauerstoffionen mehr als aufgehoben. Dadurch kommt es in diesem Betriebsmodus des Magnetrons zu einer erhöhten Lückenbildung in den aufwachsenden Schichten, die somit geringere makroskopische Spannungen und geringere mittlere Dichten aufweisen als die im balanced mode abgeschiedenen. Die Summe dieser Ergebnisse zeigt, dass die Eigenschaften der im hier untersuchten DC-Magnetronplasma abgeschiedenen Schichten maßgeblich von der Zusammensetzung des Beschichtungsplasmas und insbesondere von der Art und der Energie der auf das Substrat auftreffenden Ionen abhängen.
The stratospheric aerosol layer plays an important role in the radiative balance of Earth primarily through scattering of solar radiation. The magnitude of this effect depends critically on the size distribution of the aerosol. The aerosol layer is in large part fed by volcanic eruptions strong enough to inject gaseous sulfur species into the stratosphere. The evolution of the stratospheric aerosol size after volcanic eruptions is currently one of the biggest uncertainties in stratospheric aerosol science. We retrieved aerosol particle size information from satellite solar occultation measurements from the Stratospheric Aerosol and Gas Experiment III mounted on the International Space Station (SAGE III/ISS) using a robust spectral method. We show that, surprisingly, some volcanic eruptions can lead to a decrease in average aerosol size, like the 2018 Ambae and the 2021 La Soufrière eruptions. In 2019 an intriguing contrast is observed, where the Raikoke eruption (48∘ N, 153∘ E) in 2019 led to the more expected stratospheric aerosol size increase, while the Ulawun eruptions (5∘ S, 151∘ E), which followed shortly after, again resulted in a reduction in the values of the median radius and absolute distribution width in the lowermost stratosphere. In addition, the Raikoke and Ulawun eruptions were simulated with the aerosol climate model MAECHAM5-HAM. In these model runs, the evolution of the extinction coefficient as well as of the effective radius could be reproduced well for the first 3 months of volcanic activity. However, the long lifetime of the very small aerosol sizes of many months observed in the satellite retrieval data could not be reproduced.
This thesis describes the implementation and first on-line application of a multi-reflection time-of-flight (MR-ToF) mass analyzer for high-resolution mass separation at the ISOLTRAP mass spectrometer at ISOLDE/CERN. On the one hand, the major objective was to improve ISOLTRAPs mass-measurement capabilities with respect to the ratio of delivered contaminating ions to ions of interest. On the other hand, the time necessary to purify wanted from unwanted species should be reduced as much as possible to enable access to even more exotic nuclei. The device has been set up, optimized and tested at the University of Greifswald before its move to ISOLTRAP. The achieved performance comprises mass resolving powers of up to 200000 reached at observation times of 30ms and a contamination suppression of about four orders of magnitude by use of a Bradbury-Nielsen gate. With the characteristics, it outperforms clearly the so far state-of-the-art purification method of a gas-filled Penning trap. To improve the utilization of the MR-ToF mass analyzer, the in-trap lift method has been developed. It simplifies the application and optimization of the device, which is a crucial time factor in an on-line experiment. The device was the first of its kind successfully applied to radioactive ion beams for a mass analysis, for a mass separation (in combination with the Bradbury-Nielsen gate) as a preparatory step for a subsequent Penning-trap mass measurement and as a high-precision mass spectrometer of its own. The later was recently used for the first mass measurement of the neutron-rich calcium isotopes 53Ca and 54Ca. The so-far achieved mass-resolving power of 200000 belongs to the highest reported for time-of-flight mass analyzers at all. The first successful application of the MR-ToF system as the only mass separator at ISOLTRAP resulted in the mass measurement of 82Zn. The new mass value has been compared to mass extrapolations of the most recent Hartree-Fock-Bogoliubov (HFB) mass models, HFB-19 to HFB-21, of the BRUSLIB collaboration. The mass of the nuclide is of high interest for the compositions and depth profile of the outer crust of neutron stars. In the classical model of the outer crust of a cold, non-accrediting and non-rotating neutron star, the sequence of nuclides found within this parts is determined mainly by the binding energy of exotic nuclides. The crustal compositions determined with the three HFB mass models differed with respect to the appearance of a layer of 82Zn, originating from different mass extrapolations of this mass. With the new experimental data, the extrapolations could be evaluated. It was found that the HFB-21 mass value differs less from the experimental data than the ones from HFB-19 and 20. Therefore, in the classical model, 82Zn does not appear anymore in the outer crust. Due to its high resolution and very fast measurement time, the MR-ToF mass analyzer will be an important instruments for future activities at ISOLTRAP, at the ISOLDE facility in general, and at other radioactive ion-beam facilities.
In der vorliegenden Arbeit wurde die Katodenregion einer quecksilberfreien Helium-Xenon Niederdruckentladung im Brennfleckbetrieb experimentell untersucht. Diese Region ist von besonderem Interesse, da sich hier die Elektronenemission, die Erzeugung von Ionen und metastabilen Atomen sowie lebensdauerbegrenzende Prozesse abspielen. Um die Entladung im Brennfleckbetrieb zu realisieren, kam als Katode eine im Rahmen dieser Arbeit entwickelte neuartige planare Geflechtelektrode zum Einsatz. Mit der Methode der ortsaufgelösten Laser-Atom-Absorptionsspektroskopie (LAAS) wurden die absoluten Teilchendichten der zwei untersten angeregten Xe-Atome und die Gastemperatur in der Katodenregion bestimmt. Die Inhomogenität des Spot-Plasmas fand dabei besondere Berücksichtigung. Sowohl die Teilchendichten der zwei untersten angeregten Xe-Atome als auch die Gastemperatur sind unmittelbar vor dem Brennfleck maximal und fallen in axiale und radiale Richtung stark ab. Insbesondere die Gastemperatur beträgt in einem Abstand von 1 mm vor dem Brennfleck circa 650 K und liegt damit deutlich über Raumtemperatur. Des Weiteren ließ sich die Temperatur im Brennfleck auf der Katodenoberfläche mittels optischer Emissionsspektroskopie ermitteln. Dies geschah durch Anpassung des aufgenommenen Spektrums an die Plancksche Strahlungsgleichung. Die Brennflecktemperaturverteilung weißt ein ausgeprägtes Maximum auf, das je nach Entladungsstromstärke maximale Werte zwischen 1414 K bei 40 mA und 1524 K bei 80 mA annimmt. Von diesem Maximum aus wurde ein starker in alle Richtungen nahezu symmetrischer Temperaturabfall festgestellt. Ein technologisch wichtiger Aspekt hinsichtlich der Lebensdauer einer auf Xenon basierenden quecksilberfreien Lampe ist der negative Effekt der Xe-Gasaufzehrung. In dieser Arbeit wird gezeigt, dass die Gasaufzehrung unter Verwendung der planaren Geflechtelektrode im deutlichen Gegensatz zur industriell gefertigten Becherelektrode, wie sie vielfach in Lampen für Lichtwerbung vorkommt, vernachlässigbar klein ist. Dies wird auf die Ausbildung eines heißen Brennflecks und die damit verbundene hohe Katodentemperatur und niedrige Katodenfallspannung zurückgeführt.
Turbulenz ist allgegenwärtig in der Natur. Ein wichtiges Charakteristikum sind Fluktuationen auf einer Vielzahl von räumlichen und zeitlichen Skalen, die sowohl in neutralen Fluiden und gasförmigen Systemen, als auch in Plasmen beobachtet werden. Obwohl der elektromagnetische Charakter von Plasmen eine erhöhte Komplexität von Plasmaturbulenz bedingt, sind die grundlegenden Eigenschaften universell. In magnetisch eingeschlossenen Plasmen führen fluktuierende Plasmaparameter zu turbulentem Transport von Plasmateilchen und Energie, der die Einschlusszeit verringert und wichtige Aspekte zukünftiger Fusionskraftwerke beeinflusst. Der intermittente Charakter dieses konvektiven Teilchenflusses ist verbunden mit turbulenten Strukturen mit großen Amplituden, auch "blobs" genannt, die radial durch das Magnetfeld propagieren. Intermittente Fluktuationen im Randplasma von Experimenten mit linearer Magnetfeldgeometrie werden ebenfalls propagierenden turbulenten Strukturen zugeschrieben. Dabei ist der Mechanismus der radialen Propagation kaum verstanden. In dieser Arbeit wird die Bildung und Propagation von turbulenten Strukturen im linear magnetisierten Helikonexperiment Vineta untersucht. Durch Messungen der Fluktuationen in der azimuthalen Ebene mit multi-dimensionalen Sonden wird gezeigt, dass turbulente Strukturen in Driftwellenturbulenz im Gebiet des maximalen Dichtegradienten entstehen. Die turbulenten Strukturen propagieren hauptsächlich azimuthal in Richtung der Hintergrund ExB-Drift, aber sie besitzen auch eine starke radiale Geschwindigkeitskomponente. Die radiale Propagation wird durch das selbstkonsistente Potential der turbulenten Struktur verursacht, dass zu einem fluktuations-induzierten radialen Transport führt. Im Plasmarand werden die turbulenten Strukturen als intermittente Dichteeruptionen mit großen Amplituden beobachtet. Ein Vergleich der experimentellen Ergebnisse mit numerischen dreidimensionalen Fluid-Simulationen mit abgestimmten Geometrie- und Randbedingungen zeigt Übereinstimmung. Die Bildung der turbulenten Strukturen ist kausal mit einer quasi-kohärenten Driftmode verbunden und ihre radiale Propagation wird durch das selbstkonsistente elektrische Feld verursacht, dass aus der dreidimensionalen Dynamik resultiert. Zum Vergleich wird die Propagation von turbulenten Strukturen im Randplasma vom National Spherical Torus Experiment (NSTX) untersucht und mit theoretischen Propagationsmodellen verglichen.
Abstract
The presented experimental system is a barrier discharge system with plane parallel electrodes. The lateral surface charge distribution being deposited on the dielectric layer during each breakdown is observed optically using the well known electro-optic effect (Pockels effect). The temporal resolution of the surface charge measurement has been increased to 200 ns, and so for the first time it is possible to resolve the charge transfer to the dielectric surface in a single breakdown. In the present measurements, a patterned glow-like barrier discharge is investigated. It is found that the charge reversal in a single discharge spot (microdischarge) starts in the centre and then grows outwards. These experimental findings verify previously unconfirmed predictions from earlier numerical calculations and thereby contribute to a better understanding of the interaction between the plasma and the electrical charge on the electrodes.
Im ersten Teil der Arbeit wird der erfolgreiche Aufbau einer Diagnostik zur quantitativen Bestimmung von Oberflächenladungsdichten beschrieben. Das Messprinzip bedient sich des elektro-optischen Pockelseffekts eines BSO-Kristalls, der in der Entladungszelle als Dielektrikum eingesetzt ist. Diese Methode arbeitet zeitlich und lateral aufgelöst, was die Untersuchung der Dynamik von Oberflächenladungen auf drei verschiedenen Zeitskalen ermöglicht. Die erste Zeitskala liegt in der Größenordnung von einigen 100 ns. Damit kann erstmals die Deposition von elektrischer Ladung auf einer dielektrischen Oberfläche während eines Entladungsdurchbruchs beobachtet werden. Die Deposition beginnt im Zentrum eines zuvor deponierten Ladungsspots. Die Polarität der neudeponierten Ladung ist der des ursprünglichen Ladungsspots entgegengesetzt. Die Folge ist, dass die absolute Ladungsdichte im Zentrum im Verlauf einiger hundert Nanosekunden kleiner wird als in den Randbereichen. Der Umladungsprozess wird so lange fortgesetzt, bis das elektrische Feld der neu deponierten Ladungen dem äußeren Feld so stark entgegenwirkt, dass die Spannung zur Aufrechterhaltung der Entladung unterschritten wird und die Entladung erlischt. Die zweite untersuchte Zeitskala liegt in der Größenordnung der Periodendauer der externen Spannung. Im Nulldurchgang der Spannung liegen zeitlich stationäre Ladungsdichteverteilungen auf dem Dielektrikum vor. Die Geometrie eines mittleren Ladungsspots wird in Abhängigkeit der anliegenden Spannungen und des Gasdrucks untersucht. Einerseits ist der Spotradius abhängig von den Ionisationsprozessen im Volumen, weil die Dichte der Raumladungen die Stärke des Elektronenfokus in das Innere der Entladung steuert. Andererseits wird die Spotbildung durch eine laterale Drift von Ladungsträgern kurz vor der Oberfläche aufgrund des elektrischen Feldes deponierter Ladungsträger beeinflusst. Die dritte untersuchte Zeitskala liegt in einer Größenordnung von Sekunden. Im Fall einer initial homogenen Oberflächenladungsverteilung nimmt die mittlere Ladungsdichte in einer Größenordnung von Sekunden monoton ab. Dieser Prozess stellt einen Ladungsabbau dar, dessen zeitliches Verhalten durch zwei überlagerte Exponentialfunktionen beschreiben ließ. Dadurch werden zwei Ladungsträgerpopulationen im BSO angenommen, die verschieden abgebaut werden. Im Fall einer initial inhomogenen Ladungsdichteverteilung wird ein Transport elektrischer Ladung auf der BSO-Oberfläche in einer Größenordnung von Sekunden beobachtet. Es wird weiterhin erstmals die durch einen Atmosphärendruck-Plasmajet deponierten Ladungen auf BSO zeitaufgelöst gemessen. Die zeitliche Entwicklung der Oberflächenladungen kann mit der Messung des elektrischen Stroms an einer der Ringelektroden des Jets korreliert werden. Dadurch wird geschlossen, dass der Ladungsaustauch nicht direkt durch einen Bullet verursacht wird. Er erzeugt stattdessen einen elektrisch leitfähigen Kanal zwischen der Düse des Jets zur BSO-Oberfläche. Infolgedessen kann Ladung, die sich auf der Innenseite der Jetkapillare befindet, auf den BSO-Kristall transportiert werden. Im zweiten Teil der Arbeit werden Kenngrößen entwickelt, die den Ordnungszustand einer aus Einzelobjekten zusammengesetzten Entladungsstruktur quantitativ beschreiben. Die Kenngrößen werten dabei die laterale Leuchtdichteverteilung der Entladungsemisssion, u.a. auf Basis der Tripel-Korrelationsfunktion. Dabei werden zwei separate Bifurkationsspannungen zwischen einer hexagonalen und einer ungeordneten Anordnung beobachtet: Bei der Verringerung der Spannung wird zunächst der Bifurkationspunkt der azimutalen Ordnung durchlaufen und anschließend der Bifurkationspunkt der radialen Ordnung. Die Systeme gehen jeweils in einen Zustand geringerer Ordnung über. Die Ursache des Ordnungsverlusts ist das zunehmende Fehlen von Entladungsspots, was im Mittel zu einer geringeren Wechselwirkung der Spots untereinander führt und das System an Freiheitsgraden gewinnt. Im dritten Teil dieser Arbeit wird erstmals ein Ansatz verfolgt, der die Steuerung lateral strukturierter Entladungen ermöglicht. Dafür wurde ein Aufbau konstruiert, bei dem ein gekühlter Halbleiter als Dielektrikum in der Entladungszelle dient. Dessen externe Beleuchtung führt bei einer anliegenden Spannung zu einer Änderung des Spannungsteilerverhältnisses der kapazitiven Elemente und schließlich zu einer lokalen Erhöhung der Spannung über dem Entladungsraum. Die Größe und Leuchtintensität der durch die Beleuchtung gezündeten Entladung ist stark abhängig von der beleuchteten Fläche, der Leistungsdichte der Beleuchtung und der anliegenden Spannung.
Abstract
The surface charge distribution deposited by the effluent of a dielectric barrier discharge driven atmospheric pressure plasma jet on a dielectric surface has been studied. For the first time, the deposition of charge was observed phase resolved. It takes place in either one or two events in each half cycle of the driving voltage. The charge transfer could also be detected in the electrode current of the jet. The periodic change of surface charge polarity has been found to correspond well with the appearance of ionized channels left behind by guided streamers (bullets) that have been identified in similar experimental situations. The distribution of negative surface charge turned out to be significantly broader than for positive charge. With increasing distance of the jet nozzle from the target surface, the charge transfer decreases until finally the effluent loses contact and the charge transfer stops.
Behavior of a porous particle in a radiofrequency plasma under pulsed argon ion beam bombardment
(2010)
The behavior of a single porous particle with a diameter of 250 μm levitating in a radiofrequency (RF) plasma under pulsed argon ion beam bombardment was investigated. The motion of the particle under the action of the ion beam was observed to be an oscillatory motion. The Fourier-analyzed motion is dominated by the excitation frequency of the pulsed ion beam and odd higher harmonics, which peak near the resonance frequency. The appearance of even harmonics is explained by a variation of the particles's charge depending on its position in the plasma sheath. The Fourier analysis also allows a discussion of neutral and ion forces. The particle's charge was derived and compared with theoretical estimates based on the orbital motion-limited (OML) model using also a numerical simulation of the RF discharge. The derived particle's charge is about 7–15 times larger than predicted by the theoretical models. This difference is attributed to the porous structure of the particle.
This thesis describes mass measurements at ISOLTRAP/ISOLDE/CERN in the region of the neutron-rich calcium isotopes. For the less exotic and more abundantly produced isotopes 51Ca and 52Ca the Penning trap based ToF-ICR technique could be used to validate the available mass data and to improve their precision. For the isotopes 53Ca and 54Ca, a Multi-Reflection Time-of-Flight Mass Spectrometer (MR-ToF MS) was used to determine the mass of these exotic isotopes for the first time experimentally. This also represents the first time an MR-ToF MS was applied to derive the masses of previously unknown radioactive ions from the high precision time-of-flight data that can be gathered with the device. The mass data was then used to benchmark the strength of the N=32 neutron subshell closure and at the same time to compare to state-of-the-art shell-model calculations.
Furthermore, the capability of the MR-ToF device to deliver isobarically pure beams to a subsequent experiment was developed further and studied in detail. The new technique is based on the in-trap lift, which is normally used to in- and eject ions into and from the device. With this new selective ejection technique after separation of the ion ensemble in the MR-ToF trap, no external components are required.
Additionally, a new stabilization system for voltages supplies, based on a PI-algorithm, was developed and thoroughly tested. The stabilized voltage supply was then used to supply the most sensitive mirror voltage of the MR-ToF MS to significantly increase the short term and long-term mass resolving power of the apparatus.
Infrared laser absorption spectroscopy (IRLAS) employing both tuneable diode and quantum cascade lasers (TDLs, QCLs) has been applied with both high sensitivity and high time resolution to plasma diagnostics and trace gas measurements.
TDLAS combined with a conventional White type multiple pass cell was used to detect up to 13 constituent molecular species in low pressure Ar/H2/N2/O2 and Ar/CH4/N2/O2 microwave discharges, among them the main products such as H2O, NH3, NO and CO, HCN respectively. The hydroxyl radical has been measured in the mid infrared (MIR) spectral range in-situ in both plasmas yielding number densities of between 1011 ... 1012 cm-3. Strong indications of surface dominated formation of either NH3 or N2O and NO were found in the H2-N2-O2 system. In methane containing plasmas a transition between deposition and etching conditions and generally an incomplete oxidation of the precursor were observed.
The application of QCLs for IRLAS under low pressure conditions employing the most common tuning approaches has been investigated in detail. A new method of analysing absorption features quantitatively when the rapid passage effect is present is proposed. If power saturation is negligible, integrating the undisturbed half of the line profile yields accurate number densities without calibrating the system. By means of a time resolved analysis of individual chirped QCL pulses the main reasons for increased effective laser line widths could be identified. Apart from the well-known frequency down chirp non-linear absorption phenomena and bandwidth limitations of the detection system may significantly degrade the performance and accuracy of inter pulse spectrometers. The minimum analogue bandwidth of the entire system should normally not fall below 250 MHz.
QCLAS using pulsed lasers has been used for highly time resolved measurements in reactive plasmas for the first time enabling a time resolution down to about 100 ns to be achieved. A temperature increase of typically less than 50 K has been established for pulsed DC discharges containing Ar/N2 and traces of NO. The main NO production and depletion reactions have been identified from a comparison of model calculations and time resolved measurements in plasma pulses of up to 100 ms. Considerable NO struction is observed after 5 ... 10 ms due to the impact of N atoms.
Finally, thermoelectrically cooled pulsed and continuous wave (cw) QCLs have been employed for high finesse cavity absorption spectroscopy in the MIR. Cavity ring down spectroscopy (CRDS) has been performed with pulsed QCLs and was found to be limited by the intrinsic frequency chirp of the laser suppressing an efficient intensity build-up inside the cavity. Consequently the accuracy and advantage of an absolute internal absorption calibration is not achievable. A room temperature cw QCL was used in a complementary cavity enhanced absorption spectroscopy (CEAS) configuration which was equipped with different cavities of up to ~ 1.3 m length. This spectrometer yielded path lengths of up to 4 km and a noise equivalent absorption down to 4 x 10-8 cm-1Hz-1/2. The corresponding molecular concentration detection limit (e.g. for CH4, N2O and C2H2 at 1303 cm-1/7.66 μm) was generally below 1 x 1010 cm-3 for 1 s integration times and one order of magnitude less for 30 s integration times. The main limiting factor for achieving even higher sensitivity is the residual mode noise of the cavity. Employing a ~ 0.5 m long cavity the achieved sensitivity was good enough for the selective measurement of trace atmospheric constituents at 2.2 mbar.
(A paperback version is published by Logos under ISBN 978-3-8325-2345-9.)
Colossal magneto-resistance manganites are characterized by a complex interplay of charge, spin, orbital and lattice degrees of freedom. Formulating microscopic models for these compounds aims at meeting two conflicting objectives: sufficient simplification without excessive restrictions on the phase space. We give a detailed introduction to the electronic structure of manganites and derive a microscopic model for their low-energy physics. Focusing on short-range electron–lattice and spin–orbital correlations we supplement the modelling with numerical simulations.
Abstract
In this series of two papers we present results about the E-H transition of an inductively coupled oxygen discharge driven at radio frequency (13.56 MHz) for different total gas pressures. The mode transition from the low density E-mode to the high density H-mode is studied using comprehensive plasma diagnostics. The measured electron density can be used to distinguish between the different operation modes. This paper focuses on the determination of the negative atomic ion density and the electronegativity by two experimental methods and global rate equation calculation. As a result, the electronegativity significantly decreases over two orders of magnitude from about 25 in the E-mode to about 0.1 in the H-mode. The temporal behavior of the electronegativity in pulsed ICP shows that the negative atomic ion density reaches a steady state after 10 ms. Negative atomic ions are mainly produced by the dissociative attachment with the molecular ground state. The ion–ion recombination with the positive molecular ions and the collisional detachment with the singlet molecular metastables contribute significantly to the loss of the negative atomic ions.
Comprehensive study of the discharge mode transition in inductively coupled radio frequency plasmas
(2016)
In this contribution, the mode transition of an inductively coupled radio frequency plasma at low pressure is investigated. Therefore, a comprehensive set of plasma diagnostics were applied to determine plasma and processing parameters. Therewith, the plasma kinetics and especially the important elementary processes were studied. Hence, the reason for the mode transition was identified.
Abstract
In this series of two papers, the E-H transition in a planar inductively coupled radio frequency discharge (13.56 MHz) in pure oxygen is studied using comprehensive plasma diagnostic methods. The electron density serves as the main plasma parameter to distinguish between the operation modes. The (effective) electron temperature, which is calculated from the electron energy distribution function and the difference between the floating and plasma potential, halves during the E-H transition. Furthermore, the pressure dependency of the RF sheath extension in the E-mode implies a collisional RF sheath for the considered total gas pressures. The gas temperature increases with the electron density during the E-H transition and doubles in the H-mode compared to the E-mode, whereas the molecular ground state density halves at the given total gas pressure. Moreover, the singlet molecular metastable density reaches 2% in the E-mode and 4% in the H-mode of the molecular ground state density. These measured plasma parameters can be used as input parameters for global rate equation calculations to analyze several elementary processes. Here, the ionization rate for the molecular oxygen ions is exemplarily determined and reveals, together with the optical excitation rate patterns, a change in electronegativity during the mode transition.
Computational chemical physics can give important input to astrophysical modelling and other fields of physics, where molecular properties are of importance. Understanding of spectroscopic and reactive behaviour is crucial for many systems of astrophysical interests like stars, interstellar medium and comets. Especially stellar atmospheres are of interest, because the complex physics of stars are not yet completely understood. Stars are in an unstable balance of gravitation and radiation pressure and the atmospheric dynamics have been subject of extensive modelling. Complete and accurate spectroscopic information of the atoms and molecules in these atmospheres is necessary for this attempt. In addition, the only information we have about astrophysical systems is light which is emitted or absorbed by particles in these media. This is not only true for astrophysics. In plasma physics sometimes the usage of invasive diagnostics, like Langmuir probes, is not wanted because they disturb the system. In these cases some information of the system can be regained by passively measuring infrared spectra of the plasma or by active induction of electronic transition like the laser-induced fluorescence method. Another remote sensing application is the measurement of the atmospheric composition on earth. Here, larger particles in the atmosphere as well as greenhouse gases are of current interest. Unfortunately, the experimental spectroscopic data, which is needed for the understanding and interpretation of the measured spectra, is often incomplete. This gap can be, to some extend, filled by computational chemical physics. The aim of this work was to investigate the capabilities and limitations of ab initio based potential energy surfaces for spectroscopic and reactive studies and to apply these methods to problems of rovibrational and rovibronic spectroscopy and reaction dynamics. The choice of ab initio methods and the potential fitting methods is critical for the computational chemical physics, as all further quantities directly depend on their quality. In this work modified versions of the Braams polynomial potential energy surface were used. A high level coupled cluster ab initio method was used to build potentials for a series of small hydrocarbons. Hydrocarbons can be found almost everywhere on earth and in the universe. They exist in laboratory plasmas, stellar and planetary atmospheres and interstellar gases. In all these cases, light emitted or absorbed by the molecules is an important diagnostics of the system. The potential constructed in this work partly included a cluster expansion, which adds reactant configuration spaces to the fits. This could not be done for CH_3 and higher hydrocarbons, because of the limitations of the Coupled Cluster ab initio method, which is well suited for the potential wells, but not for the dissociation regions. The examples of methyl and methane show how the potentials can be used for rovibrational spectroscopy. Results of radiation transport simulations illustrate the importance of as complete-as-possible line lists for radiation transport calculations.\\ The rovibronic spectroscopy of diatomic molecules is another important aspect for the stellar atmospheric modelling. Metal hydrides and oxides add opacity to the atmosphere in the visible light and ultraviolet frequency regions, as well as do the hydrocarbons in the infrared one. In addition the spectra of metal hydrides/oxides can be used to gather information about metal and their isotope abundances. They are used as markers for the conditions in the atmospheres of stars. In this work a new code was developed, that efficiently calculates bound-bound transitions between electronic states and bound-continuum cross sections for diatomic molecules. It also offers an adequate treatment of quasi-bound rovibrational states. One important representative of the diatoms is magnesium hydride, MgH. Before this work, line lists and photodissociation cross section were available involving the three lowest doublet states of MgH. In this work new potential energy curves were calculated and adapted to updated experimental data. This causes changes in the relative energies between the electronic states and therefore shifts in the line lists. These are important, because accurate line positions are needed for the identification of spectral lines. In addition two further electronic states were included in the calculations. This expands the spectral range of MgH into the near ultraviolet region. Radiation transport models showed significant absorption by MgH from the newly added electronic states. A second usage of the diatomic potential energy curves are photodissociation cross sections. As interstellar environments are chemically active, such data is necessary for a complete picture of the ongoing processes. The photodissociation cross sections of MgH reveal a stronger dependence of the underlying potential than the bound-bound lines. In the case of MgH the cross sections are rather weak, besides occasional resonance lines which can be several orders of magnitude stronger. As mentioned, not only spectroscopic, but also reactive behaviour of molecules is important in astrophysics. A current problem connected with this is the abundance of CH^+ in interstellar clouds. Its measured abundances do not fit the predictions from theoretical models. In addition Gerlich and co-workers recently measured low temperature H + CH^+ -> C^+ + H_2 reaction rates, which diverge from the theoretical picture and which could not be explained. In this work a reactive potential energy surface was built for the CH_2^+ system, which was then used to perform extensive calculations with quasi-classical trajectory and quantum scattering methods. It was found out, that the potentials used in previous works are not accurate enough to allow low temperature calculations. Results from these potentials must be taken with care. Furthermore, the results from the new potential energy surface indicate significantly reduced reaction rates compared to previous numerical studies. This is in agreement with the new results of Gerlich and co-workers. Nevertheless, the large error bars in the low temperature range for experimental as well as numerical results strongly suggest refined methods to be developed for both, before a final conclusion can be made. This work demonstrated the possibility of modern computational chemical physics to supply consistent data for spectroscopy and reaction dynamics. These are necessary and important inputs for fields like astrophysics, plasma physics and chemistry.
Advancing Radiation-Detected Resonance Ionization towards Heavier Elements and More Exotic Nuclides
(2022)
RAdiation-Detected Resonance Ionization Spectroscopy (RADRIS) is a versatile method for highly sensitive laser spectroscopy studies of the heaviest actinides. Most of these nuclides need to be produced at accelerator facilities in fusion-evaporation reactions and are studied immediately after their production and separation from the primary beam due to their short half-lives and low production rates of only a few atoms per second or less. Only recently, the first laser spectroscopic investigation of nobelium (Z=102) was performed by applying the RADRIS technique in a buffer-gas-filled stopping cell at the GSI in Darmstadt, Germany. To expand this technique to other nobelium isotopes and for the search for atomic levels in the heaviest actinide element, lawrencium (Z=103), the sensitivity of the RADRIS setup needed to be further improved. Therefore, a new movable double-detector setup was developed, which enhances the overall efficiency by approximately 65% compared to the previously used single-detector setup. Further development work was performed to enable the study of longer-lived (t1/2>1 h) and shorter-lived nuclides (t1/2<1 s) with the RADRIS method. With a new rotatable multi-detector design, the long-lived isotope 254Fm (t1/2=3.2 h) becomes within reach for laser spectroscopy. Upcoming experiments will also tackle the short-lived isotope 251No (t1/2=0.8 s) by applying a newly implemented short RADRIS measurement cycle.
Diese Dissertation beschäftigt sich mit der Erzeugung von edelmetallfreien Katalysatoren für die Sauerstoffreduktion in Brennstoffzellen. Dabei wird ein neuartiger, dualer Plasmaprozess entwickelt, aufgebaut und die so-erzeugten Schichten mit verschiedenen elektrochemischen (CV, RDE und RRDE) und strukturanalytischen Methoden (SEM, EDX, IR, XPS, Leitfähigkeit, XRD, NEXAFS, EXAFS und TEM) untersucht. Auf diese Weise ist es erstmalig gelungen edelmetallfreie Katalysatoren mit einem Plasmaprozess herzustellen, ohne dass eine zusätzliche Pyrolyse benötigt wird. Die katalytische Aktivität der Schichten ist außerdem deutlich höher als die von rein chemisch hergestellten Metall–Polypyrrol-Schichten.
Multiply negatively charged aluminium clusters and fullerenes were generated in a Penning trap using the "electron-bath" technique. Aluminium monoanions were generated using a laser vaporisation source. After this, two-, three- and four-times negatively charged aluminium clusters were generated for the first time. This research marks the first observation of tetra-anionic metal clusters in the gas phase. Additionally, doubly-negatively charged fullerenes were generated. The smallest fullerene dianion observed contained 70 atoms.
Explosive volcanic eruptions emitting large amounts of sulfur can alter the temperature of the lower stratosphere and change the circulation of the middle atmosphere. The dynamical response of the stratosphere to strong volcanic eruptions has been the subject of numerous studies. The impact of volcanic eruptions on the mesosphere is less well understood because of a lack of large eruptions in the satellite era and only sparse observations before that period. Nevertheless, some measurements indicated an increase in mesospheric mid-latitude temperatures after the 1991 Pinatubo eruption. The aim of this study is to uncover potential dynamical mechanisms that may lead to such a mesospheric temperature response. We use the Upper-Atmospheric ICOsahedral Non-hydrostatic (UA-ICON) model to simulate the atmospheric response to an idealized strong volcanic injection of 20 Tg S into the stratosphere (about twice as much as the eminent 1991 Pinatubo eruption). Two experiments with differently parameterized effects of sub-grid-scale orography are compared to test the impact of different atmospheric background states. The simulations show a significant warming of the polar summer mesopause of up to 15–21 K in the first November after the eruption. We argue that this is mainly due to intrahemispheric dynamical coupling in the summer hemisphere and is potentially enhanced by interhemispheric coupling with the winter stratosphere. This study focuses on the first austral summer after the eruption because mesospheric temperature anomalies are especially relevant for the properties of noctilucent clouds, whose season peaks around January in the Southern Hemisphere.
The Mt. Pinatubo eruption in 1991 had a severe impact on the Earth system, with a well-documented warming of the tropical lower stratosphere and a general cooling of the surface. This study focuses on the impact of this event on the mesosphere by analyzing solar occultation temperature data from the Halogen Occultation Experiment (HALOE) instrument on the Upper Atmosphere Research Satellite (UARS). Previous analyses of lidar temperature data found positive temperature anomalies of up to 12.9 K in the upper mesosphere that peaked in 1993 and were attributed to the Pinatubo eruption. Fitting the HALOE data according to a previously published method indicates a maximum warming of the mesosphere region of 4.1 ± 1.4 K and does not confirm significantly higher values reported for that lidar time series. An alternative fit is proposed that assumes a more rapid response of the mesosphere to the volcanic event and approximates the signature of the Pinatubo with an exponential decay function having an e-folding time of 6 months. It suggests a maximum warming of 5.4 ± 3.0 K, if the mesospheric perturbation is assumed to reach its peak 4 months after the eruption. We conclude that the HALOE time series probably captures the decay of a Pinatubo-induced mesospheric warming at the beginning of its measurement period.
The idea of estimating stratospheric aerosol optical thickness from the twilight colours in historic paintings – particularly under conditions of volcanically enhanced stratospheric aerosol loading – is very tantalizing because it would provide information on the stratospheric aerosol loading over a period of several centuries. This idea has in fact been applied in a few studies in order to provide quantitative estimates of the aerosol optical depth after some of the major volcanic eruptions that occurred during the past 500 years. In this study we critically review this approach and come to the conclusion that the uncertainties in the estimated aerosol optical depths are so large that the values have to be considered questionable. We show that several auxiliary parameters – which are typically poorly known for historic eruptions – can have a similar effect on the red–green colour ratio as a change in optical depth typically associated with eruptions such as, for example, Tambora in 1815 or Krakatoa in 1883. Among the effects considered here, uncertainties in the aerosol particle size distribution have the largest impact on the colour ratios and hence the aerosol optical depth estimate. For solar zenith angles exceeding 80∘, uncertainties in the stratospheric ozone amount can also have a significant impact on the colour ratios. In addition, for solar zenith angles exceeding 90∘ the colour ratios exhibit a dramatic dependence on solar zenith angle, rendering the estimation of aerosol optical depth highly challenging. A quantitative determination of the aerosol optical depth may be possible for individual paintings for which all relevant parameters are sufficiently well constrained in order to reduce the related errors.
Plasmapolymerisation mit einem Atmosphärendruck-Mikroplasma-Jet zur Bildung funktioneller Schichten
(2012)
In Rahmen dieser Arbeit wurde die Plasmapolymerisation von aminogruppenhaltigen und perfluorierten Kohlenwasserstoffen mit einem Atmosphärendruck Mikroplasma Jet untersucht, mit dem Ziel einer erstmaligen erfolgreichen Abscheidung von Teflon-artigen und aminogruppenhaltigen Schichten. Hierzu wurde ein Versuchsaufbau zur Schichtabscheidung mit einem Mikroplasma-Jet bei Atmosphärendruckbedingungen konzipiert und aufgebaut. Dieser besteht im Wesentlichen aus dem Plasma-Jet und der ihn umgebenden Glaskuppel, welche die Erzeugung definierter Umgebungsatmosphären bei Normaldruck gestattet sowie vor eventuell entstehenden toxischen Reaktionsprodukten schützt. Als erste Aufgabe wurde die Deposition mit den aminogruppenhaltigen Präkursoren Cyclopropylamin (CPA) und Ethylendiamin (EDA) bearbeitet. Es zeigte sich, dass die Abscheidung im selbstorganisierten Jet-Modus möglich war. Die abgeschiedenen Schichten besitzen trotz eines kuppelförmigen Abscheidungsprofils eine homogene chemische Struktur mit einem Stickstoffgehalt von bis zu 20%, wie durch Profilometrie beziehungsweise XPS ermittelt wurde. Es wurden Werte von [NH2]/[C] zwischen 5,5 % und 3 % (EDA) sowie 4 % und 1 % (CPA) erreicht, abhängig von der Behandlungszeit der Substrate und der verwendeten Umgebungsatmosphäre. Die Schutzgasatmosphäre, bestehend aus einem Gemisch aus Stickstoff und Wasserstoff, welche dazu gedacht war die Bildung primärer Aminogruppen zu unterstützen, hatte einen negativen Effekt auf die Abscheidung. Im Vergleich zu einem Prozess an Luft wurde die Depositionsrate halbiert. Weiterhin konnte ein positiver Effekt auf den Anteil der Aminogruppen nur bei CPA festgestellt werden. Bezüglich der chemischen Zusammensetzung der Schichten wird ein erstes Modell der Plasmapolymerisationsreaktionen vorgestellt, welches auf dem wiederholten Vorgang der Abspaltung einer Aminogruppe und der nachfolgenden Reaktion der so entstandenen Radikale basiert. Bei der Bearbeitung der zweiten Aufgabe, der Deposition von fluorierten Plasmapolymer-Schichten, wurde ein spezielles Entladungsregime des Jets entdeckt. Die hierbei identifizierten Konditionen ermöglichten erstmalig die Abscheidung von C:F-Schichten mit einem Atmosphärendruck Jet. Hierbei wurden mit Octafluorcyclobutan (c-C4F8) als Präkursor, mit hohen Wachstumsraten (bis zu 43 nm/s mit N2-Atmosphäre) Schichten erzeugt. In diesen wurde mitttels XPS eine homogene chemische Struktur mit einem [F]/[C]-Verhältnis von 1,4 und einem sehr geringen Gehalt an Stickstoff und Sauerstoff nachgewiesen. Fits des hoch aufgelöst gemessenen C 1s Peaks zeigen einen Vernetzungsgrad von 44 % und ein [CF2]/[CF3]-Verhältnis von rund 1,8. Der statische Wasserkontaktwinkel bei diesen Schichten lag im Bereich von 100° – 135°. Die geforderte Hydrophobie der Schichten wurde damit erreicht. Luft als Umgebungsatmosphäre während des Beschichtungsprozesses führt nicht zu einem überwiegend ätzenden Plasmaprozess, reduziert jedoch die Depositionsrate um Faktor vier. Änderungen der chemischen Zusammensetzung der Schicht im Vergleich zur Schutzgasatmosphäre wurden nicht festgestellt. Die Verwendung von Octafluorpropan (C3F8) als Präkursor ergab nur ein minimales Schichtwachstum unter Schutzgas- und kein Wachstum unter Luft-Atmosphäre. Basierend auf den Beobachtungen anderer Autoren, wurde dies durch für die Plasmapolymerisation ungünstigere Fragmentierung des Präkursors erklärt. Das spezielle Entladungsregime, die eingeschnürte und lokalisierte bogenähnliche Entladung, wird als die Ausprägung einer --Modus Atmosphärendruck Entladung erklärt, bei der das Substrat als zweite geerdete Elektrode fungiert. Hierzu ist eine ausreichende Leitfähigkeit des Substrats notwendig. Anhand eines vereinfachten Ersatzschaltbildes werden die beobachteten Abhängigkeiten von Substratmaterial und Entladungsregime modelliert
Response of Osteoblasts to Electric Field Line Patterns Emerging from Molecule Stripe Landscapes
(2022)
Molecular surface gradients can constitute electric field landscapes and serve to control local cell adhesion and migration. Cellular responses to electric field landscapes may allow the discovery of routes to improve osseointegration of implants. Flat molecule aggregate landscapes of amine- or carboxyl-teminated dendrimers, amine-containing protein and polyelectrolytes were prepared on glass to provide lateral electric field gradients through their differing zeta potentials compared to the glass substrate. The local as well as the mesoscopic morphological responses of adhered osteoblasts (MG-63) with respect to the stripes were studied by means of Scanning Ion Conductance Microscopy (SICM) and Fluorescence Microscopy, in situ. A distinct spindle shape oriented parallel to the surface pattern as well as a preferential adhesion of the cells on the glass site have been observed at a stripe and spacing width of 20 μm. Excessive ruffling is observed at the spindle poles, where the cells extend. To explain this effect of material preference and electro-deformation, we put forward a retraction mechanism, a localized form of double-sided cathodic taxis.
Electromagnetic Drift Waves
(2010)
In the rf-plasma of the linear magnetized VINETA experiment, different types of low-frequency waves are observed. The emphasis in this work is on the interaction mechanism between drift waves on the one and kinetic Alfven waves on the other hand. In the peaked density profile of the plasma column drift waves occur as modulation of the plasma density. As gradient driven instability, they draw their energy from the radial density gradients. Alfven waves as magnetic field fluctuations are stable in the present configuration. They are launched by a magnetic excitation antenna. Parallel conduction currents in the plasma are common to both wave phenoma. A B-dot probe as standard diagnostic tool is used to detect the fluctuating magnetic fields of both wave types. The challenge are the small induced voltages due to the low wave frequency. The probe design with an integrated amplifier close to the probe head takes this into acount. The developed B-dot probe is mounted to different positioning systems to characterize both wave phenomena. For Alfven waves, the dispersion relation is recorded experimentally. It is found to be in good agreement with the prediction of the Hall-MHD theory with included resistive term, accounting for the cold collisional plasma. The fluctuating magnetic field pattern is recorded with azimuthal scans. The current density is obained by Amperes law. It is concentrated in helically twisted current filaments. For the unstable drift waves, similar investigations are done with simultaneously recorded density fluctuations. In the azimuthal plane, the locations of the parallel current filaments and the fluctuating density are found to be in phase, supporting the predicted drive of parallel currents by pressure gradients. A mutual influence of the two wave types is observed in an interaction experiment. Assuming parallel currents as coupling quantity, an interpretation of the experimental findings is given based on the linear theory of drift waves.
Abstract
The presented work highlights the role of residual weakly-bound surface electrons acting as an effective seed electron reservoir that favors the pre-ionization of diffuse barrier discharges (BDs). A glow-like BD was operated in helium at a pressure of 500 mbar in between two plane electrodes each covered with float glass at a distance of
3 mm.The change in discharge development due to laser photodesorption of surface electrons was studied by electrical measurements and optical emission spectroscopy. Moreover, a 1D numerical fluid model of the diffuse discharge allowed the simulation of the laser photodesorption experiment, the estimation of the released surface electrons, and the understanding of their impact on the reaction kinetics in the volume. The breakdown voltage is clearly reduced when the laser beam at photon energy of 2.33 eV hits the cathodic dielectric that is charged with residual electrons during the discharge pre-phase. According to the adapted simulation, the laser releases only a small amount of surface electrons in the order of
10 pC. Nevertheless, this significantly supports the pre-ionization. Using a lower photon energy of 1.17 eV, the transition from the glow mode to the Townsend mode is induced due to a much higher electron yield up to 1 nC. In this case, both experiment and simulation indicate a retarded stepwise release of surface electrons initiated by the low laser photon energy.
Abstract
Single self-stabilized discharge filaments were investigated in the plane-parallel electrode configuration. The barrier discharge was operated inside a gap of 3 mm shielded by glass plates to both electrodes, using helium-nitrogen mixtures and a square-wave feeding voltage at a frequency of 2 kHz. The combined application of electrical measurements, ICCD camera imaging, optical emission spectroscopy and surface charge diagnostics via the electro-optic Pockels effect allowed the correlation of the discharge development in the volume and on the dielectric surfaces. The formation criteria and existence regimes were found by systematic variation of the nitrogen admixture to helium, the total pressure and the feeding voltage amplitude. Single self-stabilized discharge filaments can be operated over a wide parameter range, foremost, by significant reduction of the voltage amplitude after the operation in the microdischarge regime. Here, the outstanding importance of the surface charge memory effect on the long-term stability was pointed out by the recalculated spatio-temporally resolved gap voltage. The optical emission revealed discharge characteristics that are partially reminiscent of both the glow-like barrier discharge and the microdischarge regime, such as a Townsend pre-phase, a fast cathode-directed ionization front during the breakdown and radially propagating surface discharges during the afterglow.
Surface charge measurements on different dielectrics in diffuse and filamentary barrier discharges
(2017)
Abstract
Previously, we reported on the measurement of surface charges during the operation of barrier discharges (BDs) using the electro-optic Pockels effect of a bismuth silicon oxide (BSO) crystal. With the present work, the next milestone is achieved by making this powerful method accessible to various dielectrics which are typically used in BD configurations. The dynamics and spatial distribution of positive and negative surface charges were determined on optically transparent borosilicate glass, mono-crystalline alumina and magnesia, respectively, covering the BSO crystal. By variation of the nitrogen admixture to helium and the pressure between 500 mbar and 1 bar, both the diffuse glow-like BD and the self-stabilized discharge filaments were operated inside of a gas gap of 3 mm. The characteristics of the discharge and, especially, the influence of the different dielectrics on its development were studied by surface charge diagnostics, electrical measurements and ICCD camera imaging. Regarding the glow-like BD, the breakdown voltage changes significantly by variation of the cathodic dielectric, due to the different effective secondary electron emission (SEE) coefficients. These material-specific SEE yields were estimated using Townsend’s criterion in combination with analytical calculations of the effective ionization coefficient in helium with air impurities. Moreover, the importance of the surface charge memory effect for the self-stabilization of discharge filaments was quantified by the recalculated spatio-temporal behavior of the gap voltage.
This thesis highlights the impact of surface charges and negative ions on the pre-ionization, breakdown mechanism, and lateral structure of dielectric barrier discharges operated in binary mixtures of helium with nitrogen or electronegative oxygen. Sophisticated diagnostic methods, e.g., non-invasive optical emission spectroscopy and the electro-optic Pockels effect as well as invasive laser photodetachment and laser photodesorption, were applied at one plane-parallel discharge configuration to investigate both relevant volume and surface processes. Moreover, the experimental findings were supported by numerical fluid simulations of the discharge. For the first time, the memory effect of the measured surface charge distribution was quantified and its impact on the local self-stabilization of discharge filaments was pointed out. As well, it turned out that a few additional seed electrons, either desorbed from the charged dielectric surface or detached from negative ions in the volume, significantly contribute to the pre-ionization resulting in a reduced voltage necessary for discharge breakdown. Finally, effective secondary electron emission coefficients of different dielectrics were estimated from the measured breakdown voltage using an analytical model.
The present experimental work investigates plasma turbulence in the edge region of magnetized high-temperature plasmas. A main topic is the turbulent dynamics parallel to the magnetic field, where hitherto only a small data basis existed, especially for very long scale lengths in the order of ten of meters. A second point of special interest is the coupling of the dynamics parallel and perpendicular to the magnetic field. This anisotropic turbulent dynamics is investigated by two different approaches. Firstly, spatially and temporally high-resolution measurements of fluctuating plasma parameters are investigated by means of two-point correlation analysis. Secondly, the propagation of signals externally imposed into the turbulent plasma background is studied. For both approaches, Langmuir probe arrays were utilized for diagnostic purposes. The main findings can be summarized as follows: Greatly elongated fluctuation structures exist in plasma edge turbulence. The structures are aligned along the confining magnetic field (k|| = 0). The correlation degree of fluctuations for a short connection length of 0.75m is greater than 80%. For much longer connection lengths of 23m and 66m, the correlation degree is reduced to approximately 40%. A conceptual interpretation of these observations is the coexistence of two different fluctuation components. One component has a correlation length parallel to the magnetic field below 20m and the other component a correlation length greater than 70m. Sine signals in the frequency range 1-100 kHz were injected into the turbulent plasma background. The propagation parallel and perpendicular to the magnetic field of the signals was studied. In poloidal direction, an asymmetry is observed, that can be explained by a copropagation of the signal with the background E × B-rotation of the plasma. The signal propagation parallel to the magnetic field shows no such asymmetry. As an advanced approach, spatio-temporal wave patters were injected into the edge plasma. The waves launched that way can be seen as test waves' in a turbulent background. The coupling strength of the imposed wave patterns to the background turbulence relies on the match of the imposed waves to the dynamics of turbulent structures. If the propagation direction of the imposed waves is parallel to the propagation direction of the background plasma, improved coupling is observed. This finding underlines the importance of the background plasma rotation for future attempts of controlling the plasma edge turbulence. Further optimization of frequency and wave vector of the imposed waves is probably a promising approach for achieving a significant and systematic influence of turbulence. Taking into account the present experimental state-of-the-art, for a deeper insight into the mechanism of the plasma edge turbulence of magnetized high-temperature plasmas a joint effort of numerical modeling and experimental results is a valuable approach. Such a cooperation should cover the explanation of the correlation observations as well as the experiments on signal injection into background turbulence. A quantitative comparison between the results presented in this work and a dedicated numerical drift wave simulation would be a significant step forward to a better understanding of plasma edge turbulence.
Abstract
We propose a setup enabling electron energy loss spectroscopy to determine the density of the electrons accumulated by an electropositive dielectric in contact with a plasma. It is based on a two-layer structure inserted into a recess of the wall. Consisting of a plasma-facing film made out of the dielectric of interest and a substrate layer, the structure is designed to confine the plasma-induced surplus electrons to the region of the film. The charge fluctuations they give rise to can then be read out from the backside of the substrate by near specular electron reflection. To obtain in this scattering geometry a strong charge-sensitive reflection maximum due to the surplus electrons, the film has to be most probably pre-n-doped and sufficiently thin with the mechanical stability maintained by the substrate. Taking electronegative CaO as a substrate layer we demonstrate the feasibility of the proposal by calculating the loss spectra for Al2O3, SiO2, and ZnO films. In all three cases we find a reflection maximum strongly shifting with the density of the surplus electrons and suggest to use it for charge diagnostics.
Motiviert durch den Vorschlag einer direkten, optischen Ladungsmessung an Staubteilchen wird die Lichtstreuung an den dielektrischen Kern-Schale-Teilchen tiefgehend untersucht.
Das Streuregime wird durch Analyse des Nah- und Fernfeldes unter Verwendung von Methoden, die für homogene Teilchen entwickelt wurden, eingehend charakterisiert und eine Verallgemeinerung der dazu verwendeten Funktionen auf ein k-fach beschichtetes Teilchen angegeben. Dabei werden die sich im Teilcheninneren manifestierenden Effekte der Hybridisierung der beiden Oberflächenphononen des Kern-Schale-Teilchens herausgearbeitet und visualisiert.
Die vorliegende Untersuchung der unterschiedlichen Kenngrößen ermöglicht ein detailliertes und umfangreiches Verständnis der Lichtstreuung an dielektrischen Kern-Schale-Teilchen und der Art und Weise, wie sich die Hybridisierung der Oberflächenphononen auf diese auswirkt.
Die dabei analysierte Interferenzstruktur des elektromagnetischen Feldes in der Teilchenschale, berechnet mittels der vollen Mie-Rechnung, passt zur Interpretation der optischen Antwort des Kern-Schale-Teilchens mithilfe der Hybridisierungstheorie.
Dieses Hybridisierungsbild und somit die Subsysteme und ihre Wechselwirkung werden in dieser Arbeit aus den analytisch exakten Mie-Koeffizienten heraus präpariert, um die neue Sichtweise mit der alten Mie-Theorie zusammenzubringen.
Die Idee einer spektroskopische Ladungsmessung wird im Hinblick auf die Bestimmung der Wandladung aufgegriffen. Die bisherigen Methoden zur Ladungsmessung sind zwar vielfältig, bieten jedoch nur Zugang zur absoluten Wandladung und liefern keine Informationen über ihre Verteilung senkrecht zur Oberfläche oder über die Dynamik der Aufladung.
Beides wäre jedoch für ein mikroskopisches Verständnis der Plasma-Wand-Wechselwirkung notwendig, sodass die Elektronenenergieverlustspektroskopie zur Ladungsbestimmung vorgeschlagen wird. Die Methode wird zunächst anhand einer lokalen Antworttheorie für verschiedene in die Wand eingesetzte Schichtstrukturen ausgelotet und aufgrund vielversprechender Resultate anschließend mittels der im betrachteten Parameterbereich notwendigen nichtlokalen Antworttheorie eingehend untersucht. Diese Theorie erfasst die Anregung von Resonanzen höherer Moden, die sich als besonders sensitiv auf die zusätzlichen Ladungsträger erweisen. Insgesamt wird ein experimenteller Aufbau mit einer geeigneten, in die Plasmakammerwand einsetzbaren Schichtstruktur vorgeschlagen, mit dem die Wandladung durch Elektronenenergieverlustspektroskopie bestimmt werden könnte.
Collisional absorption of dense fully ionized plasmas in strong high-frequency laser fields is investigated in the non-relativistic case. Quantum statistical methods are used as well as molecular dynamics simulations. In the quantum statistical expressions for the electrical current density and the electron-ion collision frequency–valid for arbitrary field strength–strong correlations are taken into account. In addition, molecular dynamic simulations were performed to calculate the heating of dense plasmas in laser fields. Comparisons with the analytic results for different plasma parameters are given. Isothermal plasmas as well as two-temperature plasmas are considered.
We present a Green's function based treatment of the effects of electron-phonon coupling on transport through a molecular quantum dot in the quantum limit. Thereby we combine an incomplete variational Lang-Firsov approach with a perturbative calculation of the electron-phonon self energy in the framework of generalised Matsubara Green functions and a Landauer-type transport description. Calculating the ground-state energy, the dot single-particle spectral function and the linear conductance at finite carrier density, we study the low-temperature transport properties of the vibrating quantum dot sandwiched between metallic leads in the whole electron-phonon coupling strength regime. We discuss corrections to the concept of an anti-adiabatic dot polaron and show how a deformable quantum dot can act as a molecular switch.
The thesis describes experimental results based on optical diagnostics of low- pressure discharges. The models, which are necessary for the interpretation of the experimental data, are developed and simulations are done. The contents can be categorized into the following topics: 1) the time-resolved tunable diode laser absorption spectroscopy of excited states of argon in pulsed magnetron discharge and modeling the plasma afterglow; 2) optical emission- and laser absorption spectroscopy of excited states of argon in radio-frequency (rf) discharge and calculation of the escape factor for self-absorption; 3) fast video recording of the oscillatory motion of a dust particle in rf discharge and analysis of the data.
The goal of this thesis was to characterize the properties of tetramyristoyl cardiolipin (TMCL) and several environmental influences on it. This included investigating the pH and temperature dependency of TMCL as well as the influences of ROS on TMCL and exam-ining the lipid-protein interactions between TMCL and cytc. Furthermore, I extended the research to the analysis of binary mixtures composed of TMCL and dimyristoyl phosphati-dylcholine (DMPC). To this end, I investigated the samples with the aid of the Langmuir monolayer technique. This method allowed me to mimic interactions occurring at the membrane surface as it represents one membrane layer. The recording of π-A isotherms was also coupled with further other techniques like Brewster angle microscopy (BAM), Infrared Reflection-Absorption Spectroscopy (IRRAS), Grazing Incidence X-Ray Diffraction (GIXD) and Total Reflection X-Ray Fluorescence (TRXF) to enable a more comprehensive monolayer study. In addition, some systems were analyzed using Thin-layer Chromatography (TLC) and/or Differential Scanning Calorimetry (DSC) to be able to draw conclusions about sample composition or characteristic temperatures, respectively.
We examine the turbulence driven by the ion and electron temperature gradients in selected magnetic configurations of the Wendelstein 7-X (W7-X) stellarator. The inherent flexibility in the configuration space of W7-X enables us to find candidate configurations manifesting low turbulent transport. We follow insights gained by stellarator optimization techniques, in order to identify key geometric features, which are directly related to the ion and electron heat fluxes produced by plasma turbulence. One such a feature is the flux expansion at locations where the curvature is particularly unfavourable. Starting from a configuration routinely used in the W7-X experiment, we end up with an optimized configuration. Based on this equilibrium, we select a configuration from W7-X configuration database with a similar feature as the optimized one. With the help of nonlinear gyrokinetic simulations, we show that the heat flux in this configuration is less stiff than in the initial configuration, both for ion temperature gradient and electron temperature gradient turbulence.
AbstractWe propose a new scattering mechanism of Rydberg excitons, i.e., those with high principal quantum numbers, namely scattering by coupled LO phonon-plasmon modes, which becomes possible due to small differences in energies of the states due to different quantum defects. Already in very low-density electron–hole plasmas these provide a substantial contribution to the excitonic linewidth. This effect should allow determining plasma densities by a simple line shape analysis. Whenever one expects that low-density electron–hole plasma is present the plasmon induced broadening is of high significance and must be taken into account in the interpretation.
Abstract
We present experiments on the luminescence of excitons confined in a potential trap at milli-Kelvin bath temperatures under continuous-wave (cw) excitation. They reveal several distinct features like a kink in the dependence of the total integrated luminescence intensity on excitation laser power and a bimodal distribution of the spatially resolved luminescence. Furthermore, we discuss the present state of the theoretical description of Bose–Einstein condensation of excitons with respect to signatures of a condensate in the luminescence. The comparison of the experimental data with theoretical results with respect to the spatially resolved as well as the integrated luminescence intensity shows the necessity of taking into account a Bose–Einstein condensed excitonic phase in order to understand the behaviour of the trapped excitons.
We investigate local THz field generation using spintronic THz emitters to enhance the resolution for micrometer-sized imaging. Far-field imaging with wavelengths above 100 µm limits the resolution to this order of magnitude. By using optical laser pulses as a pump, THz field generation can be confined to the area of laser beam focusing. The divergence of the generated THz beam due to laser beam focusing requires the imaged object to be close to the generation spot at a distance below the THz field wavelength. We generate THz-radiation by fs-laser pulses in CoFeB/Pt heterostructures, based on spin currents, and detect them by commercial low-temperature grown-GaAs (LT-GaAs) Auston switches. The spatial resolution of THz radiation is determined by applying a 2D scanning technique with motorized stages allowing step sizes in the sub-micrometer range. Within the near-field limit, we achieve spatial resolution in the dimensions of the laser spot size on the micrometer scale. For this purpose, a gold test pattern is evaporated on the spintronic emitter separated by a 300 nm SiO2 spacer layer. Moving these structures with respect to the femtosecond laser spot, which generates THz radiation, allows for resolution determination. The knife-edge method yields a full-width half-maximum beam diameter of 4.9 +- 0.4 µm at 1 THz. The possibility to deposit spintronic emitter heterostructures on simple glass substrates makes them attractive candidates for near-field imaging in many imaging applications.
In our study, we determine the alignment of magnetic domains in a CoFeB layer using THz radiation. We generate THz pulses by fs laser pulses in magnetized CoFeB/Pt heterostructures based on spin currents. An LT-GaAs Auston switch detects the radiation phase sensitively and allows us to determine the magnetization alignment. Our scanning technique with motorized stages, with step sizes in the sub-micrometer range, allows us to image two dimensional magnetic structures. Theoretically, the resolution is restricted to half of the wavelength if focusing optics in the far-field limit are used. By applying near-field imaging, the spatial resolution is enhanced to the single digit micrometer range. For this purpose, spintronic emitters in diverse geometric shapes, e.g., circles, triangles, squares, and sizes are prepared to observe the formation of magnetization patterns. The alignment of the emitted THz radiation can be influenced by applying unidirectional external magnetic fields. We demonstrate how magnetic domains with opposite alignment and different shapes divided by domain walls are created by demagnetizing the patterns using minor loops and imaged using phase sensitive THz radiation detection. For analysis, the data are compared to Kerr microscope images. The possibility of combining this method with THz range spectroscopic information of magnetic texture or antiferromagnets in direct vicinity to the spintronic emitter makes this detection method interesting for a much wider range of applications probing THz excitation in spin systems with high resolution beyond the Abbe diffraction limit, limited solely by the laser excitation area.
In this work, 2-dimensional measurements in the THz frequency range with self-made spintronic THz emitters were presented. The STE were used to optimize the spatial resolution and determine the magnetization in geometric shapes. At the beginning, various combinations of FM and NM layers were produced and measured to achieve an optimal composition of the STE. The layer thickness of the ferromagnetic CoFeB layer and the nonmagnetic PT layer was also varied. The investigations have shown that a layer combination of 2 nm thick CoFeB and 2 nm thick Pt, applied to a fused silica glass substrate and covered with a 300 nm thick SiO2 layer, emits the highest THz amplitude. Based on these, a structured sample, consisting of an STE and an additional layer system of 5 nm Cr and 100 nm Au, was produced. Further, three wedge-shaped structures were removed from the gold layer by an etching process so that the THz radiation generated by the STE can pass through these areas. This enables the optimization of the resolution of the system. For this purpose, the sample was moved perpendicular to the laser beam by two stepping motors with a step size of 5 μm and imaged 2-dimensionally. By reducing the step size to 0.2 μm, the beam diameter could be measured at the edge of the structure using the knife-edge method. Based on this measurement, the resolution of the system could be determined as 5.1 ± 0.5 μm at 0.5 THz, 4.9 ± 0.4 μm at 1 THz, and 5.0 ± 0.5 μm at 1.5 THz. These results are confirmed by simulations considering the propagation of THz wave packets through the SiO2. The expansion of the FWHM of the waves, passing through the 300 nm thick layer, is about 1%. Only a SiO2 layer with a thickness in the μm range occurs an expansion of around 10%. This shows that it is possible to perform 2-dimensional THz spectroscopy with a resolution in the dimension of the exciting laser beam by using near-field optics. Afterward, the achieved spatial resolution was used to investigate the influence of external magnetic fields on the STE and the emitted THz radiation. By implementing a pair of coils above the sample, an external magnetic field could be applied parallel to the pattern. The used sample was designed in such a way that only certain geometric areas on the fused silica glass substrate were coated with an STE so that THz radiation is emitted only in those areas. The 2-dimensional images show the geometric structures for f = 1.0 THz and f = 1.5 THz clearly. By applying a permanent, positive magnetic field (+M), a positive course of the THz amplitude can be seen. A rotation of the magnetic field by 180° (-M) leads to a reversal of the orientation of the emitted THz radiation, whereby the magnetic field does not influence the corresponding frequency spectrum. By using minor loops, the sample was demagnetized by the constant reduction of the magnetic field strength with alternating magnetic field direction. The 2-dimensional representation of the pattern with a step size of 10 μm shows that the sample was demagnetized since both, positively and negatively magnetized structures, could be imaged. In addition, in the 2nd row from the top, a completely demagnetized circle and a rectangle with a division into two domains can be seen. These structures have both positive and negative magnetized areas, which are separated by a domain wall. To investigate this in more detail a 2-dimensional measurement of the divided regions was made with a step size of 2.5 μm. These images confirm the division of the structures into positive and negative domains, separated by a domain wall, which was verified by Kerr-microscope measurements. Both data show a similar course of the domains and the domain wall. However, to be able to examine the domain wall more precisely using 2-dimensional THz spectroscopy, the resolution of the system must be improved to a range of a few nm, because the expected domain wall width is between 𝑙𝑊 = 12.56 nm and 𝑙𝑊 = 125.6 nm. The improved resolution would make it possible to image foreign objects, such as microplastics in biological cells or tissue. For this purpose, different plastics, such as polypropylene, polyethylene, and polystyrene, were investigated in the THz frequency range up to 4 THz. While no specific absorption could be determined for PP, characteristic absorption peaks were found for PE and PS. The energy of the photons with a frequency of about 2.2 THz excites lattice vibrations in the PE. Therefore, this frequency is specifically absorbed, and the intensity in the transmission spectrum is lower than for other frequencies. PS absorbs especially THz radiation with a frequency of 3.2 THz. In addition, all of the investigated plastics are mostly transparent for THz radiation, which makes imaging of these materials feasible. Based on these basic properties, it will be possible to image and identify these types of plastic.
Tunable Diode Laser Absorption Spectroscopy in the mid InfraRed spectral range (IR-TDLAS) has been applied to investigate the behaviour of CF, CF2 and C2F4 species produced in pulsed CF4/H2 capacitively coupled radio frequency plasmas (13.56 MHz CCP). This experimental technique was shown to be suitable for temporally resolved measurements of the absolute number density of the target molecules in the studied fluorocarbon discharges. The temporal resolution of about 20…40 ms typically achieved in the standard data acquisition mode (“stream mode”) was sufficient for the real-time measurements of CF2 and C2F4, but not of CF whose kinetics was observed to be much faster. Therefore, a more sophisticated approach (“burst mode”) providing a temporal resolution of 0.94 ms was established and successfully applied to CF density measurements. In order to enable the TDLAS measurements of the target species, preliminary investigations on their spectroscopic data had been carried out. In particular, pure C2F4 has been produced in laboratory by means of vacuum thermal decomposition (pyrolysis) of polytetrafluoroethylene and used as a reference gas. Therefore, an absorption structure consisting of several overlapping C2F4 lines around 1337.11 cm-1 was selected and carefully calibrated, which provided the first absolute measurements of the species by means of the applied experimental technique. The absolute number density traces measured for CF, CF2 and C2F4 in the studied pulsed plasmas were then analysed, in which two differential balance equations were proposed for each of the species to describe their behaviour during both “plasma on” and “plasma off” phases. Analytical solutions of the balance equations were used to fit the experimental data and hence to deduce important information on the kinetics of the studied molecules. In particular, during the “plasma off” phase, the self-recombination of CF2 (CF2 + CF2 (+M) → C2F4 (+M)) was found to be dominant in the kinetics of the radical, but of minor importance for C2F4 production. A rapid consumption of CF observed within 7…25 ms after switching off the plasma was explained mainly by volume reaction with other species (most likely with CF3), whereas diffusion of the radical towards the reactor walls followed by sticking on the surfaces was found to contribute only at relatively low pressures (<10 Pa). Under certain discharge conditions, measured CF density traces exhibited significant overshoots in 50…150 ms after the plasma ignition, which had not been known from literature before. The electron impact fragmentation of C2F4 was shown to be essential for CF production at the beginning of the “plasma on” phase and therefore for formation of the observed CF density overshoots. Finally, the broad band FTIR spectroscopy was applied in order to better characterize the gas phase composition of the studied plasmas. Thus, absorption bands of CF4, C2F4, C2F6, C3F8, CHF3 and HF stable molecules were detected in the FTIR spectra recorded between 400 and 4000 cm-1. The spectra were then successfully deconvolved and the absolute concentration of the detected species was estimated. In particular, the absolute number density of C2F4 obtained from the FTIR measurements was in a good agreement with that achieved by means of the IR-TDLAS technique. The work was supported by the German Research Foundation (DFG) within the framework of the Collaborative Research Centre Transregio 24 “Fundamentals of Complex Plasmas” (SFB/TRR24, project section B5).
Magnetic reconnection is a ubiquitous phenomenon observed in a wide range of magnetized plasmas from magnetic confinement fusion devices to space plasmas in the magnetotail. The process enables the release of accumulated magnetic energy by rapid changes in magnetic topology, heating the plasma in the vicinity of the reconnection site, generating fast particles and allowing a wealth of instabilities to grow. This thesis reports on the results from a newly constructed linear, cylindrical and modular guide field reconnection experiment with highly reproducible events, VINETA.II. A detailed analysis of the reconnecting current sheet properties on a macroscopic and microscopic scale in time and space is presented. In the experiment, four parallel axial wires create a figure-eight in-plane magnetic field with an X-line along the central axis, as well as an axial inductive field that drives magnetic reconnection. Particle-in-cell simulations show that the axial current is limited by sheaths at the boundaries and that electrostatic fields along the device axis always set up in response to the induced electric field. Current sheet formation requires an additional electron current source, realized as a plasma gun, which discharges into a homogeneous background plasma created by a rf antenna. The evolution of the plasma current is found to be dominantly set by its electrical circuit. The current response to the applied electric field is mainly inductive, which in turn strongly influences the reconnection rate. The three-dimensional distribution of the current sheet is determined by the magnetic mapping of the plasma gun along the sheared magnetic field lines, as well as by radial cross-field expansion. This expansion is due to a lack of equilibrium in the in-plane force balance. Resistive diffusion of the magnetic field by E=η j is found to be by far insufficient to account for the high reconnection rate E=-dΨ/dt at the X-line, indicating the presence of large electrostatic fields which do not contribute to dissipative reconnection. High-frequency magnetic fluctuations are observed throughout the current sheet which are compared to qualitatively similar observations in the Magnetic Reconnection Experiment (MRX, Princeton). The turbulent fluctuation spectra in both experiments display a spectral kink near the lower hybrid frequency, indicating the presence of lower hybrid type instabilities. In contrast to the expected perpendicular propagation of mainly electrostatic waves, an electromagnetic wave is found in VINETA.II that propagates along the guide field and matches the whistler wave dispersion. Good correlation is observed between the local axial current density and the fluctuation amplitude across the azimuthal plane. Instabilities driven by parallel drifts can be excluded due to the large required drift velocities or low resulting phase velocities that are not observed. It is instead suggested that a perpendicular, electrostatic lower hybrid mode indeed exists that resonantly excites a parallel, electromagnetic whistler wave through linear mode conversion. The resulting fluctuations are found to be intrinsic to the localized current sheet and are independent of the slower reconnection dynamics. Their amplitude is small compared to the in-plane fields, and have a negligible contribution to anomalous resistivity through momentum transport in the present parameter regime.
In magnetisierten Plasmen kommt dem Verständnis von magnetischen Fluktuationen eine tragende Rolle hinsichtlich der Plasmadynamik zu. Diese Fluktuationen treten in Form linearer und nichtlinearer Wellenphänomene oder auch als Änderung der magnetischen Topologie auf. Im Rahmen der vorliegenden Dissertation wurde der Einfluß von niederfrequenten elektromagnetischen Wellen und der von topologischen Magnetfeldänderungen durch magnetische Rekonnektion auf die Dynamik der Ionen experimentell untersucht. In dem linearen magnetisierten Laborexperiment VINETA wurden kinetische Alfvénwellen angeregt und durch detaillierte Messung der Dispersion mittels magnetischer Fluktuationsdiagnostiken eindeutig identifiziert. Für das Verständnis des Dispersionsverhaltens müssen die Berandung der Wellen und der Einfluß von Stößen einbezogen werden. Mittels laserinduzierter Fluoreszenz (LIF) wurde die Ionenenergieverteilungsfunktion (IEVF) gemessen. Dabei wurde das Schema dahingehend erweitert, daß bei periodischen Störungen des Plasmas phasenaufgelöste Messungen der IEVF durchgeführt werden können. Die elektrischen Felder der durch vergleichsweise kleine magnetische Störungen angeregten linearen Alfvénwellen sind jedoch in der Regel zu klein, um einen signifikanten Einfluß auf die Ionendynamik zu nehmen. Anders verhält es sich jedoch bei einem stark nicht-linearem Anregungssschema: Die Welle-Teilchen Wechselwirkung konnte für nichtlineare Anregung Alfvénischer Wellen durch amplitudenmodulierte Helikoneigenmoden mittels LIF nachgewiesen werden. In dem toroidalen Experiment VTF kann magnetische Rekonnektion periodisch und unter reproduzierbaren Bedingungen angetrieben werden. Diese Voraussetzungen ermöglichen systematische Untersuchungen der Rückwirkung magnetischer Rekonnektion auf die Ionendynamik mittels LIF. Dabei ist es zum ersten Mal gelungen, eine Ionenheizung als Folge von Rekonnektion direkt nachzuweisen. Ferner konnte gezeigt werden, daß diese Heizung stark lokalisiert ist und nur am magnetischen X-Punkt, dem Ort der Rekonnektion, auftritt. Mittels zeitaufgelöster Messungen konnte ein kausaler Zusammenhang zwischen der Rekonnektionsrate und der Ionenheizung gezeigt werden. Desweiteren wurden starke nicht-thermische Komponenten der IEVF diagnostiziert, die mit der beobachteten Ionenheizung korrelieren. Numerische Simulationen, basierend auf einem kinetischen Einteilchenbild, zeigen einen Transfer von magnetischer Energie zu kinetischer Energie der Ionen, der konsistent mit dem experimentell beobachteten Anstieg der Ionentemperatur ist.