Refine
Year of publication
- 2012 (5) (remove)
Document Type
- Doctoral Thesis (5)
Has Fulltext
- yes (5)
Is part of the Bibliography
- no (5)
Keywords
- Atmosphärendruckplasma (5) (remove)
Institute
In der Arbeit werden hydrodynamische Modelle und numerische Verfahren zur theoretischen Beschreibung von anisothermen Plasmen untersucht und zur Analyse von Argonentladungen eingesetzt. Es wird ein neues Vier-Momenten-Modell sowie ein neues Drift-Diffusionsmodell zur Beschreibung der Elektronen hergeleitet. Die Beschreibung der Schwerteilchen erfolgt auf Basis eines Zwei-Momenten-Modells bzw. eines Drift-Diffusionsmodells. Zur selbstkonsistenten Bestimmung des elektrischen Feldes wird die Poisson-Gleichung gelöst. Es wird gezeigt, dass die neu entwickelten Fluid-Modelle eingesetzt werden können, um nichtlokale Transporteffekte der Elektronen zu studieren. Zur Diskretisierung der Mehr-Momenten-Modelle werden neue FCT-Verfahren auf Basis der Finiter-Differenzen- und der Finite-Elemente-Methode hergeleitet. Die Diskretisierung der Drift-Diffusionsmodelle erfolgt mittels einer modifizierten Scharfetter-Gummel-Methode. Zur Unterstützung experimenteller Untersuchungen werden neben einer Niederdruckglimmentladung, einer RF-Entladung bei Niederdruck und einer gepulsten Atmosphärendruckentladung auch eine dielektrisch behinderte Entladung bei Atmosphärendruck analysiert. Es wird gezeigt, dass die experimentell beobachteten Schichtstrukturen auf die lange Lebensdauer metastabiler Argonatome zurückzuführen sind.
Die Inaktivierung von Bakterien durch Antiseptika, z. B. auf chronischen Wunden ist unter anderem aufgrund der Bildung von Biofilmen erschwert. Ebenso stellt die Entwicklung von Resistenzen gegenüber Antibiotika ein immer größer werdendes Problem bei der Behandlung von Infektionen dar. Zudem ist die antimikrobielle Behandlung nur ein Teilaspekt, um chronisch infizierte Wunden in einen regenerativen Heilungsprozess zu überführen. Daher sind neue, alternative Behandlungsstrategien von hoher Bedeutung. Hierfür scheint physikalisches Plasma aufgrund seiner antimikrobiellen wie auch wundheilungsfördernder Wirkungsweise eine aussichtsreiche Perspektive darzustellen. Zur Erzeugung von sog. Tissue Tollerablen Plasma (TTP) stehen verschiedene Plasmaquellen zur Verfügung, die zur Anwendung gegen Mikroorganismen in Biofilmen in Frage kommen. In der vorliegenden Arbeit wurden der kinpen09 und zwei Dielektrisch-Behinderte-Oberflächen-Entladungs-Quellen, die Conplas- und die Epoxidharz-Plasmaquelle, auf ihre antimikrobielle Wirkungsweise mit Argonplasma mit und ohne Sauerstoffbeimischung und mit Luftplasma v. a. an Biofilmen mit P. aeruginosa SG81 und S. epidermidis RP62A untersucht. Mit dem kinpen09 wurde zusätzlich die antimikrobielle Effektivität von Plasma mit Helium oder Stickstoffbeimischungen getestet. Bei Einsatz des kinpen09 zeigte sich Argon als das antimikrobiell effektivste Trägergas. Bei der Epoxidharz-Plasmaquelle war Luftplasma am wirksamsten. Bei der Conplas sind Luft- und Argonplasma etwa gleich effizient gegen mikrobielle Biofilme. Die Reduktionsraten bei Argonplasma mit dem kinpen09 und Conplas lagen nach 300 s Expositionszeit bei P. aeruginosa bei ca. 5 log10 und mit dem kinpen09 bei S. epidermidis bei 3 log10. Diese Reduktionsraten übersteigen mit Ausnahme von 300 s Ar+O2-Plasma (kinpen09) die Wirksamkeit von Chlorhexidin (0,1 %), einem Standard-Antiseptikum zur Behandlung von Biofilmen, nach 10 min Behandlungsdauer von ca. 1,5 log10 signifikant (p < 0,005). In Übereinstimmung zur Literatur lässt sich aus den Ergebnissen ableiten, dass v. a. Sauerstoffradikale für die antimikrobielle Wirksamkeit verantwortlich sind. Neben der alleinigen Anwendung von TTP könnten Kombinationsbehandlungen mit Antiseptika aussichtsreiche Verfahren zur gezielten Inaktivierung von Mikroorganismen in Biofilmen und zur Modulation von Wundheilungsprozessen darstellen.
The biological decontamination and sterilization is a crucial processing step in producing and reprocessing of medical devices. Since polymer-based materials are increasingly used for the production of medical devices, the application of conventional sterilization processes are restricted to a certain extent. Conventional sterilization techniques on the basis of high temperatures, toxic gases, or ionizing radiation can be detrimental to the functionality and performance of polymeric materials. For this reason, alternative, gentle, and efficient decontamination processes are required. One possible approach is the use of non-thermal physical plasmas. Especially atmospheric pressure plasma is receiving great interest due to the absence of vacuum systems which is highly attractive for the practical applicability. Its mechanisms of action enable the efficient killing and inactivation of micro-organisms which are attributed to the interaction of plasma-generated reactive oxygen and nitrogen species (ROS, RNS) as well as plasma-emitted (V)UV radiation. Owing to the moderate gas temperatures (near or at room temperature) so-called cold plasmas are well-suitable for the treatment of heat-sensitive materials, such as polymers, without affecting their bulk properties. The present work focuses on the investigation of atmospheric pressure plasma processes for the biological decontamination of polymers. The objective is to help elucidate on the one hand the impact of varied plasma process parameters on the inactivation of micro-organisms and on the other hand the influence of plasma on the surface properties of the substrate. The investigations were performed by means of a high-frequency driven plasma jet (from the product line kINPen) operated with argon and argon-oxygen mixtures. Three main aspects were analyzed: 1. The effect of plasma on the viability of micro-organisms dependent on working gas, treatment time, and the sample distance (distance between the jet nozzle and the substrate). 2. The plasma-based removal of microbial biofilms. 3. The effects of the plasma treatment on the surface properties of selected polymers. Additionally to the capability of the applied plasma jet in killing microbes the efficacy of this plasma jet for the removal of complex biological systems (e.g. biofilms) is shown. To model cell constituents of bacteria different synthetic polymers were chosen to gain insight into the decomposition process responsible for biofilm degradation. By investigating the impact of atmospheric pressure plasma on physico-chemical surface properties of various synthetic aliphatic and aromatic polymers the interaction mechanisms between plasma and plasma-exposed material are discussed. These studies are accompanied by applying different optical plasma diagnostic techniques (optical emission spectroscopy and two-photon absorption laser induced fluorescence spectroscopy) to obtain information on the plasma gas phase which contributes to the elucidation of the reaction mechanisms occurring during plasma exposure. Moreover, it is presented to which extent the plasma treatment influences the surface properties of polymers during the plasma-based bio-decontamination process and further, the benefits of surface-functionalized polymers for biomedical application is discussed.
In the framework of the current work has been the plasma initiated and surface catalysed species conversion studied in low pressure and atmospheric plasmas. The aim of the work is to improve the understanding of the internal processes in order to increase the energy efficiency as well as the selectivity of the reaction products of future plasma devices. Beside many technical applications of plasmas, air purification shows great potential. Over the last decades, plasma based pollution control has proofed its ability to remove harmful contaminants or annoying odours from an air stream. However, the energy efficiency and the selectivity of the products are a remaining challenge.
Motivated by these issues, a multi stage packed-bed reactor has been used to remove admixed ethylene and toluene from an air stream. It has been found that the maximum toluene destruction has been 60%, whereas ethylene has been nearly completely removed. The specific energy β has been between 120 and 1600 JL-1. Fourier Transform Infrared spectroscopy, FTIR spectroscopy, has been used to identify and quantify the species H2O, CO2, CO, O3, HNO3, HCN, CH2O, CH2O2, N2O and NO2. However, none of these experiments led to the detection of NO.
The embedment of packing material into a plasma volume leads to increased surface effects. In order to study them, the inner side of a tube reactor, made of Pyrex, served as the surface under study and has been exposed to a rf plasma for 1h. The surface effects of the plasma treatment have been investigated indirectly by studying the oxidation of NO into NO2. After the plasma exposure, the reactor has been evacuated and filled with a gas mixture of 1% NO in N2 / Ar. Both species have been measured using quantum cascade laser absorption spectroscopy, QCLAS. It has been found that, using oxygen containing plasmas, the NO concentration decreased whereas the NO2 concentration increased. Therefore, oxygen containing plasmas are able to deposit oxygen on the surface. The filling with NO leads to the oxidation via the Eley-Rideal mechanism. A simplified model calculation supports these assumptions.
For a more comfortable application of the QCLAS, a compact multi channel spectrometer has been developed, TRIPLE Q. It combines the high time resolution with the possibility to measure the concentration of at least three infrared active species simultaneously. Due to the high time resolution, a huge number of spectra have to be analysed. In order to calculate absolute number densities, an algorithm has been developed which automatically treats typical phenomena like pulse jitter, rapid passage effect or variations of the intensity of the laser pulses.
The gas temperature is an important parameter in plasma physics. Using the TRIPLE Q system, the gas temperature has been determined for pulsed dc plasmas. For this case, NO has been used as a probe gas. From the spectra, the temperature has been calculated using the line ratio method. The relative intensity of the absorption structures of NO at 1900.5cm-1 and 1900.08cm-1 depend on the temperature. Therefore, the ratio has been used to calculate the gas temperature with a time resolution in the μs range.
Vibrationally excited nitrogen can be an energy reservoir that plays an important role in plasma chemistry. In N2 / N2O plasmas, vibrationally excited N2 can undergo relaxation via a resonant vibration vibration coupling between vibrationally excited N2 and N2O. Due to such an efficient energy transfer, the method allows one to study the relaxation of vibrationally excited N2. Using this method, molecules, which are not infrared active, can be monitored. This approach has extended the field of scientific and commercial applications of the QCLAS.
Der Einsatz von atmosphärischem Niedertemperaturplasma zur Behandlung chronischer Wunden stellt eine erfolgversprechende, in Entwicklung befindliche Therapieoption dar. Dabei wird von der Hypothese ausgegangen, dass chronische Wunden durch die Stimulation mittels Plasma aktiviert werden können, wodurch die über die Stufe der resorptiven Inflammation die physiologische Heilung wieder in Gang gesetzt werden kann. Daher wurde zur Identifizierung des Reiz- und Inflammationspotential des Plasmas und zur Ableitung geeigneter Behandlungsparameter Plasma im HET-CAM geprüft. Zunächst wurden mit einem Atmosphärendruck Plasma-Jet unter Verwendung von Argongas und einer Dielectric-Barrier Discharge (DBD)-Plasmaquelle die Reizwirkungen an der CAM durch mäanderförmige Plasmabehandlung und punktuelle Anwendung getestet. Dabei wurden neben mäanderförmigen und punktuellen Applikationsmustern unterschiedliche Anwendungsfrequenzen und damit unterschiedliche Plasmadosen untersucht. Die Temperatur des Plasmas nahm v. a. bei längeren Behandlungszeiten Einfluss und führte zu einer Wirkungsverstärkung bis hin zu thermischen Schädigungen. Der Gasfluss erwies sich als limitierend für das geprüfte Modell. Der gepulste Modus war bei mäanderförmiger Anwendung am verträglichsten. Die Überprüfung auf Reversibilität der Effekte ergab, dass geringe Reizungen vollständig reversibel waren, währen schwere Reizungen zu nicht reversiblen Koagulationen führten. Aufgrund der unbefriedigenden Ergebnisse mit sehr schneller Bildung von Thrombosen, geringem Arbeitsabstand und fehlender Potentialfreiheit wurde die DBD-Elektrode von der weiteren Untersuchung ausgenommen und der kINPen09 als Weiterentwicklung des Plasma-Jets mit geringerer Plasmatemperatur auf inflammatorische Wirkung bei punktueller Anwendung mit verschiedenen Expositionszeiten im kontinuierlichen Modus und im gepulsten Modus mit Argon als Trägergas, sowie im kontinuierlichen Modus unter Zusatz von 0,1 % Sauerstoff, getestet. In dieser Testreihe war ebenfalls das gepulste Plasma am verträglichsten, das mit Sauerstoff angereicherte Plasma führte zu den schwersten Inflammationen. Alle Reaktionen wurden durch die kombinierte Anwendung mit Hydrocortison deutlich abgeschwächt. Mit der Inflammationsinduktion konnten Gewebeprozesse in Form von Kontraktion, Koagulation und inflammationsassoziierter Angiogenese auf der CAM erzeugt werden, die für Aktivierung der sekundären Wundheilung relevant sein dürften. Ableitend aus den Untersuchungen kann für die Anwendung an chronischen Wunden eine Behandlungszeit von maximal 5 s pro qcm Wundfläche für den kontinuierlichen Modus empfohlen werden. Dabei sollte wegen der besseren Verträglichkeit der mäanderförmigen Behandlung gegenüber der punktuellen Anwendung der Vorzug gegeben werden. Unter Berücksichtigung der vorliegenden Untersuchung zur Reiz- und Inflammationswirkung von Plasma im HET-CAM und weiteren Prüfungen zur Wirksamkeit und Verträglichkeit in vivo und in vitro erweist sich die Plasmaapplikation mit dem kINPen09 als vielversprechende Option zur Behandlung chronischer Wunden.