Refine
Year of publication
- 2014 (17) (remove)
Document Type
- Doctoral Thesis (13)
- Article (3)
- Conference Proceeding (1)
Language
- English (17) (remove)
Has Fulltext
- yes (17)
Is part of the Bibliography
- no (17)
Keywords
- Plasma (5)
- - (4)
- Plasmaphysik (3)
- 52.70.Ds (2)
- Cluster (2)
- Dynamik (2)
- Magnetische Rekonnexion (2)
- Plasmadiagnostik (2)
- 52.27.Lw (1)
- 52.65.-y (1)
Institute
- Institut für Physik (17) (remove)
Publisher
- IOP Publishing (4)
A novel method for time-resolved tuned diode laser absorption spectroscopy has been developed. In this paper, we describe in detail developed electronic module that controls time-resolution of laser absorption spectroscopy system. The TTL signal triggering plasma pulse is used for generation of two signals: the first one triggers the fine tuning of laser wavelength and second one controls time-defined signal sampling from absorption detector. The described method and electronic system enable us to investigate temporal evolution of sputtered particles in technological low-temperature plasma systems. The pulsed DC planar magnetron sputtering system has been used to verify this method. The 2" in diameter titanium target was sputtered in pure argon atmosphere. The working pressure was held at 2 Pa. All the experiments were carried out for pulse ON time fixed at 100 (is. When changing OFF time the discharge has operated between High Power Impulse Magnetron Sputtering regime and pulsed DC magnetron regime. The effect of duty cycle variation results in decrease of titanium atom density during ON time while length of OFF time elongates. We believe that observed effect is connected with higher degree of ionization of sputtered particles. As previously reported by Bohlmark et al., the measured optical emission spectra in HiPIMS systems were dominated by emission from titanium ions [1].
Modern cavity QED and cavity optomechanical systems realize the interaction of light with mesoscopic devices, which exhibit discrete (atom-like) energy spectra or perform micromechanical motion. In this thesis we have studied the crossover from the quantum regime to the classical limit of two prototypical models, the Dicke model and the generic optomechanical model. The physical problems considered in this approach range from a ground state phase transition, its dynamical response to general nonequilibrium dynamics including Hamiltonian and driven dissipative chaotic motion. The classical limit of these models follows from the classical limit of at least one of its subsystems. The classical equations of motion result from the respective quantum equations through the application of the semiclassical approximation, i.e., the neglect of quantum correlations. The approach of the results from quantum mechanics to the prediction of the classical equations can be obtained by subsequently decreasing the respective scaling parameter. In order to obtain exact results we have utilized advanced numerical methods, e.g., the Lanczos diagonalization method for ground state calculations, the Kernel Polynomial Method for dynamical response functions, Chebyshev recursion for time propagation, and quantum state diffusion for open system dynamics. We have studied the quantum phase transition of the Dicke model in the classical oscillator limit. Our work shows that in this limit the transition occurs already for finite spin length but with the same critical behavior as in the classical spin limit. We have derived an effective model for the oscillator degrees of freedom and have discussed the differences of both classical limits with respect to quantum fluctuations around the mean-field ground state and spin-oscillator entanglement. In this thesis we have proposed a variational ansatz for the Dicke model which extends the mean-field description through the inclusion of spin-oscillator correlations. The ansatz becomes correct in the limit of large oscillator frequency and in the limit of a large spin. For the latter it captures the leading quantum corrections to the classical limit exactly including the spin-oscillator entanglement entropy. We have studied the dynamics of spin and oscillator coherent states in the nonresonant Dicke model at weak coupling. In this regime periodic collapses and revivals of Rabi oscillations occur, which are accompanied by the buildup and decay of atom-field entanglement. The spin-oscillator wave function evolves into a superposition of multiple field coherent states that are correlated with the spin configuration. In our work we provide a description of the underlying dynamical mechanism based on perturbation theory. Our analysis shows that collapse and revival at nonresonance is distinguished from the resonant case treated within the rotating wave approximation by the appearance of two time scales instead of one. We have extended our study of the Dicke dynamics to the case of increasing spin length, as the system approaches the classical spin limit. We described the emergence of collective excitations above the ground state that converge to the coupled spin-oscillator oscillations observed in the classical limit. With increased spin length the corresponding Green functions thus reveal quantum dynamical signatures of the quantum phase transition. For the dynamics at larger coupling and energy, classical phase space drift and quantum diffusion hinders the direct comparison of quantum and classical observables. As we show in our work, signatures of classical quasiperiodic orbits can be identified in the Husimi phase-space functions of the propagated wave function and individual eigenstates with energies close to that of the quasiperiodic orbits. The analysis of the generic optomechanical system complements our study of cavity QED systems by a quantum dissipative system. In this thesis we have shown for the first time, how the route to chaos in the classical optomechanical system takes place, given as a sequence of consecutive period doubling bifurcations of self-induced cantilever oscillations. In addition to the semiclassical dynamics we have analyzed the possibility of chaotic motion in the quantum regime. Our results showed that quantum mechanics protects the optomechanical system against irregular dynamics. In sufficient distance to the semiclassical limit simple periodic orbits reappear and replace the classically chaotic motion. In this way direct observation of the dynamical properties of an optomechanical system makes it possible to pin down the crossover from quantum to classical mechanics.
Magnetic reconnection is a fundamental plasma process where a change in field line connectivity occurs in a current sheet at the boundary between regions of opposing magnetic fields. In this process, energy stored in the magnetic field is converted into kinetic and thermal energy, which provides a source of plasma heating and energetic particles. Magnetic reconnection plays a key role in many space and laboratory plasma phenomena, e.g. solar flares, Earth’s magnetopause dynamics and instabilities in tokamaks. A new linear device (VINETAII) has been designed for the study of the fundamental physical processes involved in magnetic reconnection. The plasma parameters are such that magnetic reconnection occurs in a collision-dominated regime. A plasma gun creates a localized current sheet, and magnetic reconnection is driven by modulating the plasma current and the magnetic field structure. The plasma current is shown to flow in response to a combination of an externally induced electric field and electrostatic fields in the plasma, and is highly affected by axial sheath boundary conditions. Further, the current is changed by an additional axial magnetic field (guide field), and the current sheet geometry was demonstrated to be set by a combination of magnetic mapping and cross-field plasma diffusion. With increasing distance from the plasma gun, magnetic mapping results in an increase of the current sheet length and a decrease of the width. The control parameter is the ratio of the guide field to the reconnection magnetic field strength. Cross-field plasma diffusion leads to a radial expansion of the current sheet at low guide fields. Plasma currents are also observed in the azimuthal plane and were found to originate from a combination of the field-aligned current component and the diamagnetic current generated by steep in-plane pressure gradients in combination with the guide field. The reconnection rate, defined via the inductive electric field, is shown to be directly linked to the time-derivative of the plasma current. The reconnection rate decreases with increasing ratio of the guide field to the reconnection magnetic field strength, which is attributed to the plasma current dependency on axial boundary conditions and the plasma gun discharge. The above outlined results offer insights into the complex interaction between magnetic fields, electric fields, and the localized current flows during reconnection.
The central aim of this thesis was the investigation of protein/polyanion interaction using circular dichroism (CD) spectroscopy, enzyme immune assay (EIA), isothermal titration calorimetry (ITC) and flow cytometry (FC). A further aim was to understand why an endogenous protein becomes immuno-genic when forming a complex. The focus was on the protein platelet factor (PF4), which gained wide interest in the clinical field, due to its role in the life-threatening, immune-driven, adverse drug effect heparin-induced thrombocytopenia (HIT). PF4 is a small homotetrameric chemokine with several basic amino acids on its surface, forming a positively charged ring. The antibodies that are formed during HIT recognize an epitope exposed on PF4, when it is in a complex with heparin at a certain molar ratio at which, PF4 tetramers are aligned on the heparin and forced into close approximation. The main results and conclusions of the thesis are summarized below: 5.1 Evolutionary Conservation of PF4 (Paper I – PF4/Evolution) By carrying out an amino acid sequence survey we found that the positively charged amino acids contributing to the heparin binding site on the surface of PF4 and related proteins are highly conserved in all vertebrates, including fish species. PF4 interacts with the phospholipid lipid A, the innermost part of the lipopolysaccharide (LPS) of Gram negative bacteria. We showed that the shorter the sugar chain of the O antigen, outer and inner core of the LPS were the more PF4 was binding. The interaction of PF4 with lipid A is inhibited by heparin, suggesting that the amino acids known to contribute to heparin binding are also involved in binding to lipid A. 5.2 PF4 Interaction with Polyanions (PA) of varying Length and Degree of Sulfation (Paper II – PF4/PA) CD spectroscopy was found to be a powerful technique to monitor structural changes of PF4 caused by binding to various clinically relevant polyanions. Therefore PF4 was titrated with different PA to investigate the dependencies: i. impact of the PF4:PA molar ratio, ii. degree of polymerization of the PA and iii. degree of sulfation of the PA. In all cases, exposure of HIT-relevant epitope(s) was only observed for PA that also induced changes in secondary structure of PF4. A comparison of results of an immune ¬assay with CD spectroscopic data showed that the extent of complex anti¬genicity correlates well with the magnitude of changes in PF4 secondary structure, and that the structural changes of PF4 have to exceed a certain threshold to achieve PF4/PA complex antigenicity. These findings allowed us to calculate expectation intervals for complex antigenicity solely using CD spectroscopic data. To our knowledge, this was the first demonstration that the capability of drugs to induce antigenicity of PF4 can be assessed without the necessity of in vivo studies or the use of antibodies obtained from immunized patients specific for the antigens. The antigenicity of PF4 in complex is not restricted to negative charges originating from sulfate groups, PA with phosphate groups are also capable (binding to phospholipids). We investigated inorganic polyphosphates (polyP) with a chain length of 75 Pi and showed that the induced secondary structural changes are even higher compared to the changes induced by the different heparins and that the PF4/P75 complexes are antigenic as well. 5.3 PF4 Interaction with defined oligomeric Heparins (Paper III – PF4/defined Heparins) We tested highly purified, monodisperse heparins. In contrast to the clinically relevant but relatively undefined (high polydispersity index) glycosamino glycans reported in paper II (PF4/PA). The defined heparins induced higher secondary structural changes. Here we showed for the first time that strong conformational changes during PF4/PA complex formation are necessary but not sufficient for to the expression of the anti-PF4/heparin antibody binding site. Also, the size of the complexes is not the only prerequisite for anti-PF4/heparin antibody binding (tested by atomic force microscopy). By ITC we found that antigenicity is only induced if the PF4/PA complex has a high binding enthalpy and the complex formation leads to a negative change in entropy. 5.4 PF4/Polyphosphates (polyP) Complex Antigenicity and Interaction with Escherichia coli (E. coli, Paper IV – PF4/polyP) PolyP with chain lengths of 45 Pi and 75 Pi induced remarkable secondary structural changes in the PF4 molecule, thereby exposing the epitope recognized by anti-PF4/heparin antibodies. The induced conformational changes were similar to the changes induced by the defined heparins. Again a high binding enthalpy was observed but here in connection with a positive change in entropy. Further we showed that polyP (≥45 Pi) enhance PF4 binding to the surface of Gram negative E. coli at intermediate concentration and disrupt the binding at elevated polyP concentrations. The increased amounts of PF4 on the bacterial surface also improved the binding of anti-PF4/heparin antibodies and thereby the phagocytosis of the bacteria by poly¬morpho¬nuclear leucocytes. 5.5 Nucleic acid based Aptamers induce structural Changes in the PF4 Molecule (Paper V – PF4/Aptamer) Nucleic acids are another class of molecules containing phosphate groups. Especially after cell damage their extra¬cellular concentration can be locally quite high (>2 mg/ml). We found that certain aptamers form complexes with PF4 and thereby inducing anti-PF4/aptamer antibodies which cross-react with PF4/heparin complexes. Moreover by CD spectroscopy we showed that the protein C-aptamer caused similar secondary structural changes of PF4 like heparin, but already at much lower concentration. The maximally induced changes by the protein-C aptamer were even higher and persisted over a broader concentration range. 5.6 Protamine Interaction with Heparin (Paper VI – PS/Heparin) After the intensive investigation of the complex formation between PF4 and many different classes of PA we assessed another protein for structural changes upon complex formation with heparin. Protamine (PS) a protein in routinely used in post-cardiac surgery to reverse the anticoagulant effects of heparin was found to unfold but not to refold with increasing concentration of PA in solution. 5.7 Conclusion and Outlook When starting this thesis, it was believed that repetitive structures formed by PF4 on a heparin chain mold the epitope recognized by antibodies inducing HIT. These repetitive structures might exhibit similarities with viral capsids and are therefore recognized by the immune system of some patients. We found that induced by the close approximation PF4 changes its conformation, thereby exposing a neoepitope. The conserved positively charged amino acids of the heparin binding site and the involvement of these amino acids in the binding to lipid A confirm our hypothesis of PF4 as part of an ancient immune-mediated host defense mechanism. As possible consequence of the “primitive mechanism of defense” the highly variable O-antigens of LPS might have significantly contributed to an efficient escape mechanism by hiding the structures that made the bacteria vulnerable. In turn polyP might be an adaption of the host improve pathogen recognition by PF4 and further by antibodies inducing phagocytosis of the PF4-marked objects. Although shown only for PF4 and PS, our findings might be applicable to other proteins that also express epitopes upon changes in their secondary structure. Our physicochemical methods may further be applied: i. to drug development for the prediction of antigenicity induced by polyanionic drugs, ii. to guide the development of synthetic heparins and other polyanion based drugs, e.g. aptamers, that do not lead to HIT and iii. to provide relevant aspects for other biological functions of heparins.
This work describes the recent scientific and technical achievements obtained at the high-precision Penning trap mass spectrometer SHIPTRAP. The scientific focus of the SHIPTRAP experiment are mass measurements of short-lived nuclides with proton number larger than 100. The masses of these isotopes are usually determined via extrapolations, systematic trends, predictions based on theoretical models or alpha-decay spectroscopy. In several experiments the masses of the isotopes 252-255No and 255,256Lr have been measured directly. With the obtained results the region of enhanced nuclear stability at the deformed shell closure at the neutron number 152 was investigated. Furthermore, the masses have been used to benchmark theoretical mass models. The measured masses were compared selected mass models which revealed differences between few keV/c² up to several MeV/c² depending on the investigated nuclide and model. In order to perform mass measurements on superheavy nuclei with lower production rates, the efficiency of the SHIPTRAP setup needs to be increased. Currently, the efficiency is 2% and mainly limited by the stopping- and extraction efficiency of the buffer gas cell. The stopping and extraction efficiency of the current buffer gas cell is 12%. To this end, a modified version of the buffer gas cell was developed and characterized with 223Ra ion source. Besides a larger stopping volume and a coaxial injection the new buffer gas cell is operated at a temperature of 40K. The operation at cryogenic temperatures increases the cleanliness of the buffer gas. From extraction measurements and simulations an overall efficiency of 62(3)% was determined which results in an increase by a factor of 5 in comparison to the current buffer gas cell. Aside from high-precision mass measurements of heavy radionuclides the mass differences of metastable isobars was measured to identify candidates for the neutrinoless double-electron capture. Neutrinoless double-electron capture can only occur if the neutrino is its own antiparticle and a physics beyond the standard model exists since the neutrinoless double-electron capture violates the conservation of the lepton number. Due to its expected long half-life this decay has not yet been observed. However, the decay rate is resonantly enhanced if mother and daughter nuclide are degenerate in energy. Suitable candidates for the search of the neutrinoless double-electron capture have been identified with mass difference measurements uncertainties of about 100eV/c². In this work the results of the mass difference measurements of 12 possible candidates are presented.
Energetic ions are made to collide with atmospheric molecules. Positively charged ions of argon (Ar^+), helium (He^+), hydrogen (H_2^+ ), and protons (H^+) with energies of 50 keV to 350 keV are used as the bombarding ion. The ion beam of desired energy is produced using a linear ion accelerator at the University of Greifswald. The mass and energy distribution of sputtered particles were analysed using an Electrostatic Quadrupole SIMS (EQS) analyser. The target gases used are oxygen (O_2), sulfur hexafluoride (SF_6), and nitrogen (N_2). The ionized and fragmented particles due to collisions have been investigated. We have discovered a new process for negative ion formation in energetic ion collision with O_2 and SF_6 molecules. The process is a two body reaction between the projectile and the molecule without the need for a third particle (such as an external electron). It requires a direct charge transfer from the projectile to the molecule leaving it intact as O_2^- or SF_6^- . The process is experimentally confirmed by using a proton as projectile which does not have an electron to transfer. In comparison with positive ion fractions (O_2^+ , SF_5^+ ), the negative ions fraction is smaller by 2 orders of magnitude. This shows that the two body charge exchange process is weak due to the larger energy transfer required compared to the positive ion forming mechanisms. The two body charge exchange mechanism is not observed for ion collisions with N_2 molecule. No stable negative ion exist for N_2 molecule. The collision cross section for the ion formation during energetic ion – O_2 collision has been determined within the investigated impact energy. For SF_6 molecule the partial ion fraction of the secondary ions are determined for different projectiles involved. This kind of investigation is of great importance mainly in atmospheric physics. Energetic ions are constantly emitted from mass of the energy sources in the universe (e.g. sun). They interact with planetary objects or atmosphere on their way. A deep knowledge about the interaction processes is necessary to understand the ionospheric physics and space exploration. As second part of my thesis, a GaAs(100) surface is bombarded with 150 keV Ar^+ ion beam. From etching the surface to thin film coating, ion bombardment on solid surface found great role in the fabrication process of modern electronic and optical devices. In order to increase the knowledge on sputtering materials and because of profound importance in modern electronics, we choose GaAs(100) as our target. Among the sputtered atoms and ions, small sized cluster ions having more than 6 atoms have been identified. GaAs is a heteroatomic semiconductor containing gallium and arsenic in equal ratio. A preferential phenomenon of ’abundant sputtering’ of gallium compared to little arsenic (GaAs) has been investigated from their mass intensity. The experimental ion counts are compared with theoretically predicted relative abundance. This phenomenon of preferential sputtering is known for atomic species of sputtered GaAs but not for the sputtered cluster ions. The main reasons for this abundant sputtering of one element is attributed to the difference in ion formation energies and surface compositional change taking place during the sputtering process. Another notable characteristics is the preference in charge state among the sputtered ions. For instance, among sputtered atomic ions the ion counts of Ga^+ is 3 orders larger than As^+ ion and As^- is 2 orders larger than Ga^- ion. To get a clue for this behavior, we have investigated the energy distribution of both negatively and positively charged clusters. Different ion formation mechanisms were discussed. The energy distribution of atomic ion is partially explained by using a modified theory given by M. W. Thompson.
The Atomic Force Microscope (AFM) has become an important tool for probing the mechanical properties of cells and microparticles by force-indentation experiments. In this thesis optimized AFM approaches for these experiments are developed and applied to three types of living human cells in order to answer biologically relevant questions about their mechanics. These microscopic investigations are then interpreted with respect to nanoscopic and macroscopic biologic parameters, such as the function of cell surface receptors or the size of human heart ventricles. This thesis comprises two physical/technical chapters and three medical/biological chapters. The physical/technical chapters discuss the measurement process itself, aiming for its improvement with respect to a proper data analysis and contact model (for spherical cells). The medical/biological chapters investigate the elasticity of cells by the use of optimized AFM approaches, with respect to the used data analysis.
The extraction of raw materials in mining, as for example copper, generally requires a separation of the natural resources quarried. In most cases complex ores, mixtures of different minerals and gangue have to be separated in order to enable an economic processing. In particular for the extraction of sulfides, oxides, carbonates, phosphates, but also of coal, froth flotation is mainly used for this purpose, therefore it is considered as the most important separation process in raw material industries. Several billion tons of ores are processed annually. The principle of flotation is based on the surface properties of the mixtures components and the separation efficiency, which decisively determines the required amount of water and various chemicals, if nothing else, is an important criterion in mineral exploration and it also significantly influences the environmental impact of mineral processing. The aim of, this work was to investigate the influence, of, low-temperature plasmas on the mineral surface and, based on the acquired knowledge, to develop and verify strategies that would increase the efficiency of flotation processes through plasma pre-treatment of mineral mixtures. Since these studies are unprecedented, the results presented can be classified as a contribution to application-oriented basic research. Powder of the sulfide minerals, pyrite (FeS2), chalcopyrite (CuFeS2), chalcocite (Cu2S) and molybdenum sulfide (MoS2), were treated with plasmas of a radiofrequency and a microwave discharge and the resulting surface modifications were investigated by structure analysis such as X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). During the plasma process, the argon/oxygen and argon/hydrogen process gas mixtures used were analyzed by mass spectrometry (MS), taking into account the quantity of gaseous reaction products released, in order to estimate the rate at which chemical reactions occur. Furthermore, Langmuir and thermal probes, as well as different methods of optical emission spectrometry (OES) were utilized, which enabled a characterization of the discharges used with regard to different plasma parameters. It has been shown that sulfur dioxide (SO2) in Ar/O2 plasmas and hydrogen sulfide (H2S) in Ar/H2 plasmas are the only reaction products which can be detected by MS during the mineral treatments. Thus, the resulting sulfur rate loss could be time-resolved determined by means of additional calibrations with calibrating gases. Especially at Ar/O2-MW plasma treatments two fundamental mechanisms of mineral modification could be separated by time. Pure plasma-surface interactions at the beginning and, additionally, thermally induced reactions in during the evolution of the treatments. Comparisons regarding the relative sulfur loss during plasma-surface interactions between the investigated minerals have shown a strong influence of the process parameters whereas, under identical conditions, CuFeS2 reacted up to eight and nineteen times faster reacted than FeS2 or Cu2S. This result represents the basis of the strategy to optimize the flotation of the minerals investigated: The selective generation of oxides on the surface of one component in a mixture of sulphide minerals. In particular, at the separation of CuFeS2/FeS2 mixtures by using the oxide collectors Flotinor Fs-2 in a micro flotation cell, a high selectivity could be achieved. The recovery of CuFeS2 amounted to 100 % while less than 10 % of FeS2 was recovered and no other modifying reagents were used. XPS and XRD analyses indicate the possibility that metal oxide are created upon the CuFeS2 surface, while the formation of iron sulfates upon the FeS2 surface prevented the oxide collector adsorption. An increased intensity of the plasma treatment leads to an increased sulphate formation also on CuFeS2, whereas the recovery, and thus the selectivity of the flotation, was reduced again. It could be shown that this effect can be utilized for the separation of, CuFeS2/MoS2 mixtures by using both, oxide and sulfide collectors, because sulfates are not formed on molybdenum sulfide during Ar/O2 plasmas treatments. By means of the plasma diagnostics used the energy input onto the substrate, the gas temperature and the degree of dissociation of molecular gases were estimated and correlations regarding the surface modification have been worked out. Thereby, the region investigated within the parameter space could be enlarged due to the use of different excitation frequencies, 13.56 MHz and 2.45 GHz, and additional insights have been provided. Further studies, beyond the scope of this work, are, nevertheless, required in order to generate a more comprehensive picture of plasma-mineral interactions and to enable an optimal application of the obtained results.
The laser-matter interaction is a topic of current research. In this context, the interaction of intensive laser radiation with atomic clusters is of special interest. Du to the small cluster size, the laser field can penetrate the whole cluster volume, which leads to a high absorption of energy in the cluster. As a result, plasmas with high density and high temperature are produced. In the early phase of the laser-cluster interaction, free electrons are initially created in the cluster due to tunnel ionization or photoionization. Via collisions of these electrons with the cluster atoms, the ionization is increased and thus a dense nanoplasma is produced, which is heated by the laser. If free electrons leave the cluster during the laser-cluster interaction (outer ionization), a positive charge buildup is created. The associated charge repulsion finally can lead to the fragmentation of the cluster due to Coulomb explosion. Experimentally, interesting phenomena emerging from laser-excited clusters are observed, e.g., the creation of fast electrons, the production of highly charged ions, and X-ray emission. In this dissertation, the interaction of Gaussian laser pulses in the infrared regime with argon and xenon clusters is simulated by means of a nanoplasma model. Considering laser intensities in the non-relativistic regime, the relevant processes such as ionization, heating and expansion are theoretically described in this model with a set of coupled rate equations and hydrodynamic equations. One focus of the thesis is on the heating of the nanoplasma via inverse bremsstrahlung (IB), which is due to the absorption of laser photons in electron-ion collisions. In particular, the important question is investigated whether the consideration of the ionic structure – that means, the nuclear charge and the bound electrons – modifies the electron-ion collisions and thus the IB heating rate. Starting from a quantum statistical description, effective electron-ion potentials are used which account for both the screening due to the dense plasma and the inner ionic structure. Within the quantum mechanical first Born approximation, the consideration of the ionic structure leads to a drastic increase of the IB heating rate, in particular for high nuclear charges and low ionic charge states. However, for the parameters relevant in experiments, the applicability of the first Born approximation is questionable. Therefore, quantum mechanical calculations going beyond the first-order perturbation theory are performed. In addition, the IB heating rate is investigated with different classical methods. These are based either on transport cross sections for elastic electron-ion scattering or on classical simulations of inelastic scattering processes. Also within the classical approaches, the consideration of the ionic structure leads to an increase of the heating rate. However, this increase is shown to be only moderate. In a further part, the thesis focuses on the question how the dynamics of the laser-cluster interaction is influenced by the consideration of excited states. This is explored exemplarily for argon clusters excited by single or double laser pulses. The consideration of excitation processes in the nanoplasma leads to a decrease of the electron temperature and to an increase of the density of free electrons. Moreover, it is shown that the consideration of excitation processes results in an essential acceleration of the ionization dynamics. As a consequence, the mean ionic charge state in the plasma as well as the number of highly charged ions is significantly increased. For the population of ground states and excited states within an ionic charge state Z, collisional deexcitation processes play an important role. By means of an analytical relation between excitation and deexcitation cross sections, the rates for the respective processes in the presence of the laser field are calculated. The role of deexcitation processes is studied in detail, showing that the inclusion of these processes is essential for the correct theoretical description of the photon emission from laser-excited clusters. Based on these results, the photon yield is calculated for selected radiative transitions resulting from highly charged argon ions in the UV and X-ray regime.