Refine
Document Type
- Doctoral Thesis (11)
Has Fulltext
- yes (11)
Is part of the Bibliography
- no (11)
Keywords
- Cardiolipin (2)
- BAM (1)
- Beschichtung (1)
- Biochemie (1)
- Brewster angle microscopy (1)
- CRMP2 (1)
- Coatings (1)
- Diffusion (1)
- Domänen-Wachstum (1)
- Doxorubicin (1)
Institute
Polyelektrolyt-Multischichtfilme (PEMs) werden durch schichtweise (eng. Layer by Layer, LbL)
sequentielle Ablagerung von entgegengesetzt geladenen Polyelektrolyten auf einer
geladenen Oberfläche hergestellt. Die LbL Methode kann auf verschiedene Weise zur
Herstellung von PEM eingesetzt werden, z.B. durch Tauchen, Rotation, Sprühen oder
Beschichten mit elektromagnetischen und fluidischen Methoden. In allen Artikeln dieser
Dissertation wurde die Tauchmethode verwendet. Durch zyklische Wiederholung der
Abscheidungsschritte kann die Dicke der PEM leicht gesteuert werden. Die Oberflächen und
Grenzflächen des Films können mit der LbL Technik auch durch die elektrostatische
Wechselwirkung zwischen positiv und negativ geladenen Polyelektrolyten modifiziert werden.
Auf diese Weise lassen sich einige Eigenschaften des Films optimieren, beispielsweise
Oberflächenadhäsion und Biokompatibilität, z. B. in der Gewebezüchtung oder es kann
eine Monoschicht als Barriere an der Grenzfläche des Films adsorbiert werden, um die
Diffusion von Molekülen im Film zu begrenzen z.B. bei Aufnahme oder Freisetzen von
Medikamenten.
Daher wurde die Rolle einiger Faktoren, wie die molare Masse der Polyelektrolyte und das
Vorhandensein von Salzionen in der Präparationslösung auf die interne Struktur sowie die
Oberfläche der PEMs untersucht.
Für alle Untersuchungen dieser Dissertation wurde das häufig verwendete Modell-System aus
dem positiv geladenen Polyelektrolyten Polydimethyldiallylammonium (PDADMA), und dem
negativ geladenen Polyelektrolyten Polystyrolsulfonat (PSS), verwendet. Die Dicke der Filme
wurde mit Röntgenreflektometrie, Ellipsometrie, UV-Vis-NIR-Spektrometrie bestimmt die
interne Struktur mit Neutronenreflektometrie und die Oberflächentopografie mit Rasterkraftmikroskopie
(eng. AFM) und Rasterelektronenmikroskopie (eng. SEM).
In Artikel 1 wurde mit Hilfe der Neutronenreflektometrie die Struktur des Filmes und die
Diffusion des Polyanions PSS (DPSS) senkrecht zur PEM Oberfläche untersucht. Variiert wurde
die molare Masse des Polykations PDADMA und die Salzkonzentration der
Präparationslösung. PEMs wurden aus drei verschiedenen NaCl-Konzentrationen in der
Abscheidelösung hergestellt: 10 mmol/L, 100 mmol/L und 200 mmol/L. Die Salzkonzentration
in der Polyelektrolytlösung bestimmt die Konformation der Polyelektrolyte während der
Adsorption. Die Ketten werden weniger flach adsorbiert, wenn mehr Salzionen in der
Adsorptionslösung vorhanden sind und die Filme werden dicker.
Die Diffusion nahm mit zunehmender molarer Masse von PDADMA in Filmen, die aus 10
mmol/L, 100 mmol/L und 200 mmol/L hergestellt wurden, um mindestens drei Größenordnungen
ab, denn die Zunahme der Kettenlänge, erhöht den Vernetzungsgrad im Film. Dabei zeigten Filme aus 10 mmol/L (NaCl) mit einer niedrigen molaren Masse von PDADMA
die größte Diffusion (DPSS = 4.9 × 10−20 m2/s). Der Diffusionskoeffizient DPSS als Funktion des
Polymerisationsgrades folgt zwei Potenzgesetzen mit einem Übergang bei einem
Polymerisationsgrad von 288. Bei kürzeren Ketten stimmt der Exponent des Potenzgesetzes
gut mit dem Modell der Sticky Reptation überein. Bei längeren Ketten war der Exponent viel
größer, was vermuten lässt, dass die PSS-Ketten in einem zunehmend komplexen
Polymernetzwerk gefangen sind. Wir verstehen den Übergang als Verschränkungsgrenze für
das untersuchte System.
Bei PEMs, die aus 100 mmol/L hergestellt wurden, konnte kein Potenzgesetz festgestellt
werden. DPSS nahm sprunghaft um drei Größenordnungen ab, wenn die molare Masse von
PDADMA von 45 kDa auf 72 kDa erhöht wurde.
In Artikel 2 wurden die Oberfläche von PEMs aus Polyelektrolyten unterschiedlicher molarer
Massen untersucht. Die Oberflächenrauhigkeit und die Dicke des Films wurden mit
Röntgenreflektometrie und Ellipsometrie bestimmt. Die Oberflächentopografie wurde mit AFM
und SEM aufgenommen. Alle PEMs wurden aus PE-Lösungen mit 0,1 mol/L NaCl hergestellt.
Die Oberfläche der PEM, präpariert aus langem PSS und kurzem PDADMA oder langem PSS
und langem PDADMA, war immer flach. Bei einer Filmzusammensetzung aus langen
Polykationen (Mw (PDADMAlang) = 322 kDa) und kurzen PSS Molekülen (Mw (PSSkurz) = 10,7
kDa) wurden drei Wachstumsregime identifiziert: exponentiell, parabolisch und linear. Im
exponentiellen Wachstumsregime bildet sich nach etwa sieben Beschichtungsschritten von
PDADMA/PSS (eng. bilayers, bl) eine granulare Oberflächenstruktur aus mit einer
Oberflächenrauigkeit von 1,6 nm und einer lateralen Periodizität von 70 nm. Mit zunehmender
Schichtzahl nimmt die Oberflächenrauhigkeit sowie die laterale Periodizität zu. Im
parabolischen Wachstumsbereich aggregieren die Strukturen zu Säulen, mit einer
Oberflächenrauigkeit bis zu 23 nm und einer lateralen Periodizität bis zu 210 nm. Im linearen
Wachstumsregime sind die säulenförmigen Domänen vollständig ausgebildet und die
Oberflächenstruktur ändert sich nicht mehr. Diese Strukturen wurden schon während der
Präparation, bereits vor dem Trocknen beobachtet. Dies zeigt, dass sich die Strukturen
während der Abscheidung von PDADMA/PSS bilden.
Bei Beobachtungen im Vakuum (SEM) war im linearen Bereich die Säulenstruktur bei der
PDADMA terminierten PEM ausgeprägter als bei der PSS terminierten.
Diese Strukturen bilden sich nur im Film mit anfänglichem exponentiellem Wachstum, d.h.
wenn kurzen Ketten durch den ganzen Film diffundieren können. Das legt nahe, dass es für
die Strukturbildung nicht ausreicht, dass der Polyelektrolyt kurz ist, sondern dass es auch
beweglich sein muss. Um dies näher zu untersuchen wurde in Manuskript 1 die molare Masse des PSS variiert. Es
wurden PEMs aus langem 322 kDa PDADMA und kurzem 6,5 kDa und 3,9 kDa PSS
hergestellt und mit den Messungen von PEMs aus 10,7 kDa PSS verglichen.
Die Verkürzung von PSS hat subtile Auswirkungen auf den Filmaufbau und die
Selbststrukturierung. Für PEM aus PSS mit einer molaren Masse von 6,5 kDa konnten nur
zwei Wachstumsregime ermittelt werden: ein exponentielles und ein lineares Wachstumsregime.
Der Übergang vom exponentiellen zum linearen Wachstum erfolgte bei 28
Doppelschichten. Bei PEMs, die aus 3,9 kDa PSS hergestellt wurden, wurde bis zu 29 bl nur
ein exponentielles Wachstum beobachtet. Dies zeigt, dass eine Verringerung der molaren
Masse von PSS das exponentielle Wachstum auf eine größere Anzahl von abgeschiedenen
Doppelschichten ausdehnt. Dies ist auf die zunehmende PSS-Diffusion zurückzuführen.
In allen Filmen wurden Selbststrukturierungen beobachtet. Der Abstand und die Höhe der
säulenartigen Domänen nehmen mit jeder abgeschiedenen PDADMA/PSS-Doppelschicht
deutlich zu. Der durchschnittliche Domänenabstand ändert sich weniger und korreliert mit den
vertikalen Wachstumsregimen. Der Domänenabstand schwankt zwischen 70 nm und 750 nm.
Die größten lateralen Abstände und ein längeres exponentielles Wachstumsregime wurden
mit dem kürzesten PSS (3,9 kDa) erreicht, was auf die hohe Mobilität des PSS zurückgeführt
wird. Die Domänenhöhe ist immer kleiner als der Domänenabstand. Wenn die PEM mit
PDADMA terminiert ist, sind die Oberflächenrauhigkeit und der durchschnittliche Abstand
größer als bei PSS terminierten Filme in Wasser und nach dem Trocknen.
Darüber hinaus wurden zwischen den Domänen Filamente beobachtet. Die Filamente
bestehen aus PDADMA/PSS-Komplexen. Eine mögliche Vermutung ist, dass diese Komplexe
zwischen den Domänen diffundieren und ihren Abstand anpassen.
Die Oberflächenstruktur des Films aus PSS 10,7 kDa zeigt eine symmetrische gaußförmige
Höhenverteilung in allen drei Wachstumsregimen von 5 bis 40 bl. Für die kurze PSS war eine
solche Verteilung nur bis 15 bl (6,5 kDa) bzw. 20 bl (3,9 kDa) zu beobachten. Danach wurde
für 6,5 kDa schiefe Verteilung mit Ausläufern zu größeren Höhen beobachtet. 3,9 kDa PSS
zeigte dann sogar eine bimodale Höhenverteilung.
Die lineare Ladungsdichte von PDADMA ist etwa halb so groß wie die von PSS. Folglich
adsorbiert PDADMA in einer bürstenartigen Konformation. Wenn die oberste Schicht
PDADMA ist, dann ist das PDADMA-Molekül nicht fest an die Oberfläche gebunden. Daher ist
die durch die Oberflächenspannung erzeugte Kraft für PDADMA groß genug, um zu einer
Veränderung der Oberflächenmorphologie und folglich zu einer kleineren Gesamtoberfläche
zu führen.Außerdem sind die Domänen in 1 M NaCl-Lösung stabil, schrumpfen aber in 2 M NaCl enorm,
während ihr Abstand leicht zunimmt.
Diese Untersuchungen zeigten, dass die Mobilität des Polyelektrolyten PSS die
Voraussetzung für den Aufbau einer strukturierten Oberfläche in einem PEM-System aus
PDADMA/PSS ist. Diese Ergebnisse zeigten auch, dass die Verkürzung der Kette der PSS Moleküle
die Herstellung von Filmen erleichtert, deren Dicke und Selbststrukturierung je nach
dem gewünschten Zweck angepasst werden kann. Solche Filme können in der Medizin und
Biologie als geeignetes Substrat zur Optimierung der Adsorption von Zellen und anderen
Molekülen oder als Nanofilter effektiv eingesetzt werden.
In dieser Dissertation konnte ich zeigen, wie die Verkürzung der Kette der PSS-Moleküle zur
Bildung einer lateralen selbststrukturierten Oberfläche führt und wie die zunehmende Mobilität
der PSS-Moleküle die Oberflächenmorphologie signifikant beeinflusst.
In this thesis, I was able to provide answers to transport processes in lipid monolayers, which are ultimately, all of biological relevance. In particular, I was interested in lipid oxidation and dynamic compression/expansion processes of surfactant monolayers at the air-water interface:
Lipid oxidation was shown to be a consequence of the formation of a high concentration of reactive oxygen species (ROS) during cell respiration, which finally can lead to severe cell damage. It is not yet understood clearly, which part of the lipid molecules is especially prone to a ROS attack. I was particularly interested in the role of the double bonds of the acyl chains of the lipid molecules during oxidation. Further, I wanted to know the time scales of lipid interaction with the ROS.
Compared to lipid vesicles, lipid monolayers have the advantage that many parameters of the system can be adjusted easily. In our system, I made use of this by setting the lateral pressure to low values during H2O2 treatment, which facilitated the ROS to reach the double bonds in the acyl chains.
A prime example of biological systems out of thermal equilibrium was given in the alveolus surface, which is covered with a surfactant monolayer. During breathing, these monolayers undergo such a highly dynamic compression and expansion. Arising flows from breathing could disrupt a film and consequently, it would lose its protective role. One of my goals was to understand flows and their influence on domain shape. Dependent on the strength of the flows, I expected different growth regimes, with differing prevailing transport processes. Once understanding the underlying mechanisms in domain shaping would allow me to draw conclusions on biological systems.
In order to address these questions, I established two systems, both based on the compression of lipid monolayers. I used isotherms to study the phase behavior of the lipids:9 During compression, the lipids can undergo phase transitions from the gaseous phase to the liquid expanded phase (LE-phase) and further from the LE-phase to the liquid condensed phase (LC-phase). A coexistence regime is observed in between the LE-phase and the LC-phase, characterized by a flat increase of lateral pressure with decreasing molecular area. Some lipids exhibited LC-phase domains. These were further investigated with Brewster angle microscopy (BAM). The used BAM was equipped with an integrated Scheimpflug optics, enabling an overall focused image plane. Furthermore, time-resolved observation of the growth of the domains was possible by recording videos (20 frames per seconds).
The first system enabled the investigation of lipid peroxidation, when the lipids were exposed to ROS. I chose DMPC, POPC, DOPC and PLPC, since these are phospholipids differing in the number and position of double bonds in acyl chains, but not in the head group. I used a H2O2 enriched phosphate buffered saline (PBS) solution, which served as a precursor for more reactive ROS, like hydroxyls (.OH). PBS was chosen, since it resembles the cell environment best. During defined waiting times of H2O2 treatment, the ROS diffused vertically from the subphase towards the monolayer. The lipid molecules were in the LE-phase, which facilitated the ROS molecules to reach also the double bonds of the acyl chains. The oxidized monolayers were then compressed at constant compression speed. Since the corresponding isotherms could be measured with high precision, the relative area increase δA/A between oxidized and non-oxidized monolayer along the isotherm proved to be a good measure for lipid peroxidation. The area increase δA in the molecular area of the oxidized molecules was explained by the eventually added, more hydrophilic −OOH group at the position of a carbon atom adjacent to a double bond in the unsaturated acyl chain. The −OOH group is drawn to the hydrophilic head group of the lipid. This leads to a kink in the acyl chain, which increases the molecular area A by δA. A model, which explained this peroxidation process in lipid vesicles, could be adopted to monolayers.
I compared the oxidation of phospholipids, differing in the number and position of the double bonds of their acyl chains. I found that δA/A increased with the growing number of double bonds in one acyl chain. However, a comparison of DOPC with POPC also showed the importance of the position of the acyl chain. I determined a slow reaction kinetic. It could be estimated by a √t dependence of the number density N_surface, which denominates the ROS sticking on the monolayer. The transport of ROS towards the monolayer was found to be diffusive, because it was the slowest process in the reaction. This interpretation was reinforced by a comparison of the temperature dependence of the relative area increase δA/A with the Stokes-Einstein diffusion coefficient of water molecules. The initial ROS concentration c_0 in the trough could be traced back (c_0~ 50 nM), which is indeed a realistic value found in human cells.
Concluding, our results can be understood as a feasibility study. The complexity of the monolayer can be arbitrarily increased, for example by the addition of proteins, allowing the investigation of other oxidative processes occurring in the cell membrane.
The second system allowed the investigation of growth of LC domains during fast compression processes of monolayers. I chose erucic acid monolayers, due to its low line tension and a continuous nucleation phase, enabling the formation of fractal domains. The monolayers were investigated with isotherms and BAM videos. Since v_C (compression speed of the monolayer) was continuous over the whole compression time, I had a system with well-defined hydrodynamic conditions. This allowed me a complete analysis of the system, starting with descriptive features of the observed domains to a classification of the observed growth regimes by means of hydrodynamic theory, through to the distinction and quantification of different kind of flows and supersaturations, involving Ivantsov theory:
Dependent on the compression speed v_C, I observed seaweed or dendritic domains. The LE/LC phase transition pressure pi_t was slightly increased compared to pi_inf of the equilibrium isotherm. A high compression speed v_C induced a supersaturation Δc. I introduced the excess lateral pressure Δpi=pi-pi_inf as an appropriate quantity to describe the supersaturation Δc. I showed a linear behavior of Δc on Δpi. Δc is a macroscopic quantity since it is averaged over the whole monolayer area. I characterized the domains of the seaweed and dendritic regime with respect to tip radii, branch lengths, side branch separations and fractal dimensions. I calculated the growth speed of the main branches. A roughly doubling of the growth speed of dendritic domains, compared to seaweed domains was observed. This was an evidence of adjunctive (Marangoni) flow in the subphase.
For each monolayer, I observed drifts during domain growth, which I explained by an anisotropy in the LE-phase, caused by the continuous nucleation of the domains. These kind of surface flows were superimposed to bulk flows in the subphase. Since I had a well established system, I could analyze the influence of these surface flows on domain shape, in terms of magnitude, direction and duration of the surface flows. I therefore used FFT spectra and directionality histograms. At low flows, the FFT showed six-fold symmetry. Higher drifts exhibited incisions in the FFT, eventually leading to dumbbell shaped FFTs at very high drifts. The domains grew preferentially in the direction parallel to the incision.
I used directionality histograms to analyze the angular distribution of the growing domains. They showed that the drift direction always correlated with a minimum in the histogram. In order to analyze drift duration, I split the domain in downstream and upstream side. I could show that for small drift durations, downstream growth was preferred. However, for longer drift durations, the flows got more isotropic and consequently growth was more balanced then.
I could observe only a weak correlation between drift velocity v_D and compression speed v_C. However, dendrites were formed when the compression speed v_C was high, while seaweed domains were formed when v_C was small. Domain distortion occurred in the same way, independent if seaweed or dendritic domains were considered. I further showed that hydrodynamic flows in the subphase and surface flows are superimposed and scale differently. Consequently, they have different impact on domain shape: hydrodynamic flows act on μm scale and influence the domain morphology (distance between side branches, and tip radius) and the growth speed of the main branches. Surface flows act on the mm to cm scale, cause an anisotropic flow in the LE phase surrounding the domain, and thus affect the overall domain shape.
The anisotropy in the LE-phase led to a locally different degree of supersaturation. To take this into account, I introduced a local normalized supersaturation Δ, based on the Ivantsov solution. Therefore, I calculated Péclet numbers p of measured quantities of the system. I obtained values of 0.88 ≤Δ≤0.90 for the seaweed regime (p<5) and 0.93 ≤Δ≤0.96 for the dendritic regime (p>6). Since the Ivantsov solution can only be applied for purely diffusive processes, I applied a modified Ivantsov solution Δ_mod, which calculates Δ at a distance 𝛿 ahead of the dendrite tip. I was able to determine the progression of the diffusive layer 𝛿, however a quantitative determination failed.
Applying hydrodynamic theory allowed me to classify the two growth regimes with respect to the Boussinesq number Bq. Since for both growth regimes, I achieved values of Bq<1, bulk viscous losses dominated over surface viscous losses. Further, a cross-over length 𝜉 was calculated, from which one can distinguish, whether advective transport dominates over diffusion.
I further connected the two defined supersaturations Δ and Δc via the excess lateral pressure Δpi. From this, I saw differences in the seaweed and dendritic growth regimes: The local normalized supersaturation Δ of seaweed growth seemed to be quite stable for a further increase of the lateral excess pressure Δpi, whereas it reacted quite sensitive in the dendritic regime. This was found to be an indication of a non-equilibrium regime, caused by the strong coupling of the monolayer to the subphase. It reinforces therefore the theory of Marangoni-flow.
The findings of this thesis emphasize the importance of understanding highly dynamic compression/expansion processes arising in surfactant monolayers. Using the example of the compression of the alveolus surface, it can be seen that a more realistic model of the pulmonary alveolus is not only enabled by increasing the complexity of the surfactant monolayer (e.g. by adding specific proteins or lipid mixtures to the monolayer). Equally important is the understanding in transport processes and the consequences for the monolayer structure. By the analysis of domain shapes, I presented a method, which is suitable for such a study.
The target specificity of thioredoxin family proteins is determined by electrostatic compatibility
(2021)
The thioredoxin (Trx) family of proteins comprises many key enzymes in redox signaling, that catalyzes specific reversible redox reactions, e.g. dithiol-disulfide exchange reactions, (de-)glutathionylation, trans-nitrosylation, or peroxide reduction. With the analysis of a large number of proteins, as well as a certain redox couple in [article 1] and [article 4], we demonstrated that electrostatic complementarity is the major distinguishing feature that controls the specific interactions of Trxs with their target proteins. The primary aim of this work was to determine the importance of this specific interaction and the prediction, modulation, and engineering of functional redox interactions of Trx family proteins. To understand the role of electrostatic complementarity for the mammalian Trx1-TrxR complex, we generated more than 20 hTrx1 mutants and systematically engineered the electrostatic potential within and outside the contact area with TrxR [article 1]. The effects of these specific alterations distributed all over the protein surface were analyzed by enzyme kinetics, differential scanning fluorimetry (DSF), circular dichroism (CD) spectroscopy, and MD simulations. Trx family proteins have a broad and very distinct substrate specificity, which is a prerequisite for redox switching. In [article 4], we comprehensively compared the classification of various redoxins from all kingdoms of life based on their similarity in amino acid sequence, tertiary structure, and electrostatic properties. These similarities were then correlated to the existence of common interaction partners. Our analyses confirmed that the primary and tertiary structure similarities do not correlate to the target specificity of the proteins as thiol-disulfide oxidoreductases. However, we demonstrated that the electrostatic properties of the protein from both Trx or Grx subfamilies is the major determinant for their target specificity.
Although structurally very similar, CxxC/S-type or class I Grxs act as oxidoreductases and CGFS-type or class II Grxs act as FeS cluster transferases. In [article 3], we re-investigated the structural differences between the two main classes of Grxs to solve the mystery of the missing FeS transferase activity of the CxxC/S-type and the lack of oxidoreductase activity of the CGFS-type Grxs. The presence of a distinct loop structure adjacent to the active site is the major determinant of the Grx function. We confirmed that the function of Grxs can be switched from oxidoreductase to FeS cluster transferase by construction of a CxxC/S-type Grx with a CGFS-type Grx loop and vice versa. Results of several in vitro and in vivo assays together with the detailed structural analyses indicate that not a radically different substrate specificity accounts for the lack of activity, but rather slightly different modes of GSH binding, which is an essential nucleophile required in redox and iron homeostasis.
Various processes within the cell depend on GSH, including redox reactions, reversible posttranslational modifications, and iron metabolim. GSH is not only important in the export of FeS precursors from mitochondria, but it is also an essential cofactor for cluster binding in iron sulfur Grxs. In [article 2], we discussed the role of GSH and iron sulfur Grxs in iron metabolism, the physiological role of CGFS-type Grx interactions with BolA- like proteins, and the cluster transfer between Grxs and recipient proteins. The first well characterized physiological function of a Grx-BolA hetero complex is presented with the Grx3/4-Fra2-mediated regulation of iron homeostasis in yeast.
In synopsis, the results presented and discussed in these articles and the manuscript support the concept of electrostatic properties as the main determinant in substrate specificity towards functional predictions in Trx family proteins. The mathematical model presented here showed significantly accuracy and precision in function prediction. We are aware that our findings are focused on Trx family proteins as a particular family of proteins, but by using a machine learning strategy this mathematical model is being trained with numerous different protein models for better efficacy and accuracy, that may lead to new insights also in the specific interactions of other protein families. The new concept for the substrate specificity determinant doesn’t eliminate previously described aspects for molecular recognition, instead it reveals a deeper understanding of the protein-protein interaction. The 3D structural elements of a protein play a significant role in the specificity and function. We have been able to activate an inactive protein by replacing defined structural elements. Elimination of the loop structure from CGFS-type Grx5 transformed it from an FeS transferase into an oxidoreductase and the activity was further increased by modification of the active site. We believe that the present findings may be useful to investigate proteins in great detail regarding their function based on structure and electrostatic properties. Understanding the nature of the specific interactions may enable us to specifically modify the signal transduction pathways.
This work examines the influence of monovalent and divalent cations on tetramyristoyl cardiolipin (TMCL) monolayers. A lipid monolayer can undergo an ordering transition of the lipid alkyl chains from a disordered fluid phase (liquid-expanded (LE)) to an ordered gel phase (liquid-condensed (LC)). Compression of the lipid monolayer in a Pockels-Langmuir trough was monitored with a Wilhelmy plate tensiometer, yielding the surface pressure π in dependence of the area a molecule can occupy on average A, as a π-A-isotherm. The onset of the first order LE/LC phase transition is marked by an abrupt change in the isotherm at surface pressure πc.
These associated lipid membrane changes were characterized by variation of the compression speed, kind and concentration of the monovalent and divalent salt, pH, and temperature. The CL monolayer phase transition was found to depend on the compression speed, yielding only a small variation in the compression isotherms.
For monovalent cations on the cardiolipin monolayer, the dependence on salt concentration of the lipid liquid gel phase transition surface pressure πc was determined and a non-monotonic behavior was found, with a maximum in πc for a salt concentration of 0.1 mol/l. The maximum in πc can be shifted with pH (e.g. pH = 4.2). This behavior extended to potassium, sodium and cesium cations in the subphase. No ion specific effects were observed, which pointed to the prevalence of electrostatic interactions in the system.
Different divalent salt subphases, of either magnesium, calcium, strontium, manganese, iron or zinc salts, with fixed sodium chloride concentration of 0.15 mol/l at pH of 5.8 and 25 °C were investigated. πc decreases upon addition of divalent salts to the subphase. This points to increased screening and binding effects. Strongest binding effects were observed for calcium and manganese cations.
The electrostatic interactions of the system were modeled with a mean-field theory: Grahame’s equation, and a simple law of mass action. CL is modeled at half its molecular area and half its charge, with a proton dissociation constant of the phosphate group Ka,intrinsic(PO4) = 0.1 mol/l. The agreement with the experiment was satisfactory.
A linear dependence of πc on the temperature was found for cardiolipin monolayers on all subphases. The isothermal area compressibility modulus KA is calculated from selected isotherms. It was found that the flexibility of the monolayer decreases with temperature and the area per molecule for the cardiolipin fluid phase.
The compression speed, monovalent salt concentration, pH, and selected divalent cations were investigated with the BAM. For all a sigmoidal growth of xgel with compression was observed. For high salt concentrations non-circular and dendritic domains were observed.
A simple model for the nucleation process was introduced, yielding an estimate of 20 nm for the critical domain radius, which is below the resolution of the BAM, but a common length scale in biological systems.
This work study a monolayer of branched poly(ethyleneimine (PEI) adsorbed onto oppositely charged surfaces with iron chelates or iron ions in the absorption solution. The conformation of adsorbed PEI is explored in the dependence of the composition of the adsorption solution by measuring the surface forces using atomic force microscopy (AFM) with the colloidal probe (CP) at different ionic strengths (INaCl) in surrounding aqueous solution. The surface coverage of these layers is investigated using X-ray reflectivity.
PEI solutions show different pH values with iron chelates (pH = 3), iron ions (pH = 4.67) or pure water (pH = 9.3) at room temperature. Low surface coverage of PEI at pH = 3 adjusted by monovalent ions was also observed. However, adsorbing PEI with iron ions or iron chelates and washing with pure water shifts the pH, leading to an adsorbed PEI layer with high coverage. In our observation, the influence of iron ions and iron chelates on the surface coverage of PEI film is stronger than the pH effect. PEI adsorbed from a pure water solution shows flat conformation. Surface force measurements with CP show that PEI adsorbed from solutions containing iron chelates or iron ions cause almost identical steric forces. The thickness of the brush L is determined as a function of the ionic INaCl in the measuring solution. It scales as a polyelectrolyte brush.
The maximum number density of gold nanoparticles (AuNPs) adsorbed onto the PEI brushes was identical and larger than on flatly adsorbed PEI. On the PEI layer with the larger surface coverage, the AuNPs aggregate; on the PEI layer with the lower surface coverage they do not aggregate. Taken together, these results contribute to understanding the mechanisms determining surface coverage and conformation of PEI and demonstrate the possibility of controlling surface properties, which is highly desirable for potential future applications.
In this thesis, we also investigate the top layer (PSS and PDADMA) of polyelectrolyte multilayer (PEM) films. PEM films were prepared by sequential adsorption of oppositely charged PEs on solid substrates. PEM films consist of polydiallyldimethylammonium (PDADMA) as polycation and the polystyrene sulfonate (PSS) as polyanion. PDADMA has a smaller linear charge density than PSS. For this system, two different growth regimes are known: parabolic and linear. I studied the top layer (PSS and PDADMA) conformation of PEM films and how the structure of this top layer is affected by increasing the number of PDADMA/PSS layer pairs N and the addition of salt to the surrounding solution.
The INaCl was changed during the force-distance measurements. PSS terminated films always show electrostatic forces at INaCl < 0.1 M and flat conformation. The surface charge density is always negative at INaCl < 0.1 M. The surface charge of the PSS top layer starts to turn from negative to positive at N ≥ 14. At N between 13 and 15, adsorbed PSS cannot compensate all the excess PDADMA charge. This leads to an accumulation of the positive extrinsic sites within the PSS terminated film beyond a specific N. At INaCl ≈ 0.1 M, an exponential decaying force was measured. This is an indication of unusual long-ranged hydration force (decay length λ-1 ≈ 0.2-0.5 nm), and PSS terminated film shows zwitterionic or neutral surface. At INaCl > 0.1 M, a non-electrostatic action occurs and the PSS terminated film reswells in solution.
PDADMA terminated surface consisting of few layers show a flat conformation and the electrostatic forces were measured. For N ≥ 9 and INaCl ≤ 0.1 M, steric forces were measured. The force-distance profiles are well-explained by Alexander and de Gennes theory. PDADMA chains show a maximum L that is around 40-45 % of the contour length. For INaCl ≈ 0.1 M, and N > 9, a flat, neutral or zwitterionic surface is found (λ-1 ≈ 0.3-0.9 nm). For N = 9 and INaCl > 0.1 M, a strong screening of electrostatic interaction and attractive forces are observed. For N > 9 and INaCl > 0.1 M, the ion adsorption into the PE chains leads to an increase in the monomer size and as a result, the L increases and PDADMA brushes reswell again into the solution.
These data show that by varying N and INaCl, different surface forces can be obtained: Electrostatic forces (flat chains) both positive and negative, steric forces (brush), hydration force (flat, neutral or zwitterionic surface), and effects not yet explained (reswelling brush).
The combination of the Layer-by-Layer (LbL) method, a nano-material such as carbon nanotubes (CNTs), and charged polyelectrolytes (PEs) is a reliable approach to produce highly functionalized surface coatings. These coatings are stable, controllable, ultra-thin, and most importantly, biocompatible. The ability to tune their properties by varying the preparation conditions and the terminating layer opens up a wide range of applications in the fields of biology and medicine. Here, the goal was to create electrically conductive coatings on which cells grow and proliferate. To achieve this goal, a coating with a stable conductive film structure, a suitable film surface topography, and suitable surface potential (and 𝜁-potential) must be prepared.
At the beginning of this thesis, the focus was on the fabrication of electrically conductive multilayer films, whose electrical properties should be stable and adjustable in a controlled manner (Article 1). The combination of chemically modified CNTs as polyanions, a strong linear polycation like poly(diallyldimethylammonium chloride) (PDADMA), and the LbL-method allowed us to prepare such films. Their characterization was carried out in air at ambient conditions. Since PDADMA is non-conductive, the charge transfer within the film and thus the electrical conductivity itself depends mainly on the CNTs and their arrangement. It was found that four CNT/PDADMA bilayers (BL) were always necessary to create a lateral network structure with multiple CNT crossing points to enable and support electron transport within the film. Moreover, additional CNT/PDADMA BL resulted in decreasing sheet resistance, while the conductivity remained constant at ≈ 4 kS/m regardless of the number of bilayers. Increasing the PDADMA molecular weight (Mw) from 44.4 kDa to 322 kDa did not affect film properties such as thickness or electrical conductivity.
However, increasing the CNT concentration from 0.15 mg/ml to 0.25 mg/ml in the deposition suspension resulted in thicker and less conductive films. This is attributed to a faster adsorption process of the CNTs leading to more adsorption sites for the polycation. We found an increased PDADMA monomer/CNT ratio compared to films prepared with the lower CNT concentration in the deposition suspension. The electrical conductivity decreased by a factor of four down to 1.1 kS/m, which can be attributed to fewer contact points between the CNTs. Overall, we were able to prepare stable and electrically conductive multilayer films. Additionally, by varying the preparation conditions tuning of the electrical conductivity is possible.
To fulfill requirements regarding i.e., medical implants, film properties not only have to be stable and controllable in a dry state (described in Article 1) but also in a biological aqueous environment. Therefore, in Article 2 we immersed our coated samples in three different solutions usually employed in biological research and compared their properties with their dry state, respectively. Also, hydration/swelling effects that normally occur for polyelectrolyte multilayer films (PEMs) in solutions were investigated.
For the film preparation, PDADMA (Mw = 322 kDa) and a deposition suspension of modified CNTs with two different concentrations (0.15 mg/ml and 0.25 mg/ml), which aged for two years, were used. Independent of the CNT suspension concentration, it turned out that the film thickness of the samples, prepared from the aged suspension, decreased significantly compared to the film thickness previously measured in Article 1. As a cross-check a new and fresh CNT suspension was made, which allowed us to reproduce the film thickness described in Article 1.
These results indicated that something happened with the CNT suspension over a two-year period. An analysis via X-ray photoelectron spectroscopy (XPS) showed a decrease in the percentage of functional groups in the CNTs from the aged suspension. The loss of functional groups resulted in less negatively charged CNTs and thus in fewer adsorption sites for the polycation PDADMA. Consequently, the PDADMA monomer/CNT ratio decreased, which lowered the thickness per bilayer by a factor of three, compared to films prepared with a freshly prepared CNT suspension. The lower linear charge density of the aged CNTs also enhanced their hydrophobicity, which is, in combination with the electrostatic forces, another important factor for multilayer cohesion. In contrast to PEMs made from polycations and polyanions, no swelling of the films occurred when immersed in solutions. This can be attributed to the fact that the increased hydrophobicity of the CNTs and the hydrophobic nature of the PDADMA backbone prevent the incorporation of water into the multilayer film. In solution, the films slightly shrink (by ≈ 2 nm), which makes them even more compact. Yet they remain stable. The result is an increased electrical conductivity from 9.6 kS/m, in the dry state, up to 15.3 kS/m immersed in solutions. To summarize, we showed that by tuning the interpolyelectrolyte forces the swelling and the ensuing decrease of the electrical conductivity of the films can be prevented.
Regarding the application in biology and medicine, we must consider that long-term exposure of cells to nano-materials like CNTs could lead to damage and inflammation of adjacent tissue. Therefore, it is necessary to prevent direct contact between the electrically conductive multilayer, i.e., CNT/PDADMA film, and the cells. The solution to this problem is a biocompatible top film that covers the CNT/PDADMA multilayer completely and still provides a lateral surface structure that supports cell adhesion and proliferation. Additional layers consisting solely of PEs could provide such a top film.
In Article 3 we investigated the self-patterning of PEM films as function of deposition steps. After preparation in water, the films were dried, characterized in air, and in vacuum. The films were built with high and low molecular weight PEs. PDADMA was used as polycation and poly(styrene sulfonate) sodium salt (PSS) as polyanion. The observation via Atomic Force Microscopy (AFM) showed that films prepared with high molecular weight PEs are laterally homogeneous and form no patterns, due to the chain immobility. The flat surfaces are ineligible as a substrate for cell adhesion.
In contrast, films built with a short PSS, especially at Mw, PSS = 10.7 kDa, began to self-pattern after seven deposited PDADMA/PSS bilayers. With each additionally deposited bilayer, the surface got more and more structured, from grooves over stripes to circular domains. Increasing film thickness led to an increased lateral mean distance between the surface structures. Scanning Electron Microscopy (SEM) images showed that exposure to a vacuum resulted in a decrease in the film thickness attributed to water removal, while the mean distance between the domains increased. Thus, by using this self-pattering process we are able to prepare PEMs with a highly structured surface. By adding PDADMA/PSS bilayers, not only the CNT/PDADMA film can be covered completely, but also a suitable surface morphology for cells can be created. Controlling the number of deposited bilayers allows the preparation of suitable coatings for cells.
To further improve the interaction of the cell and coated substrate not only the lateral structure but also the interacting electrostatic forces between cells and substrate are important for the nature of cell adhesion, function, and proliferation. In Article 4 we investigated PEMs, consisting of strong PEs with a low (PDADMA) and high (PSS) linear charge density. We performed asymmetric force measurements with the help of the colloidal probe technique (CP). Here, the forces between a PEM-covered surface and a colloidal probe (silica sphere) glued to a cantilever were investigated. The colloidal probe was either bare or covered with polycation poly(ethylenimine) (PEI). The surfaces were immersed in NaCl solutions with different ionic strengths (INaCl), starting with deionized water, then enriched up to 1 mol/L NaCl. The interaction force between a CP and the surface was measured. Thus, insight into the surface potential/charge was obtained.
During film preparation, two growth regimes (parabolic and linear) exist. These regimes and the terminating layer determine the surface force of the PEM. PEMs with a terminating PSS layer are predominantly flat and negatively charged when the ion concentration is low and the film is in the parabolic growth regime (between 1 and ≈ 15 BL). This indicates charge reversal on PSS adsorption. At the transition point between the parabolic and linear growth regimes, the ratio between polyanion and polycation monomers starts to switch and some cationic monomers are neutralized not by anionic monomers but by monovalent ions. Therefore, the surface charge density in diluted NaCl solutions changed from slightly positive near the transition to positive in the linear growth regime. At the lowest ionic strengths (INaCL) the range of the surface potential goes from – 40.5 mV (9 BL, parabolic) up to + 50 mV (19 BL, linear).
In contrast, polycation (PDADMA) terminated films are overall positive in diluted NaCl solutions. At the beginning of the parabolic growth regime, the layers are more compact and flat. However, with each additional layer deposited, the film becomes less compact and the chains begin to loosen. The now more loosely bound chains start to protrude into the solution and form pseudo-brushes. This could already be observed for 10.5 BL.
It intensifies in the linear growth regime (begin at ≈ 15 BL) and results in steric surface forces. Changing the surrounding INaCl affects this behavior and the pseudo-brushes scale as polyelectrolyte brushes.
By controlling the number of bilayers (thus the growth regime), the surrounding ionic strength, and the conformation of PEs at the PEM surface, it is possible to prepare a suitable range of surface properties i.e., for cell adhesion and proliferation. To prove that these multilayers can provide a suitable surface and have a positive effect on cell behavior, we coated in Article 5 titanium-covered samples with PEMs. Investigated was the cell interaction with the surface at different zeta(ζ) - potentials, a parameter for dynamic surface potential. Here the cell activity is measured by the mobilization of calcium (Ca2+) within the cell as a function of the ζ - potential of the substrate and the externally applied electrical potential. The cell activity indicates if the ζ - potential, provided by the sample surface, is suitable or not for the cells. The favorable interaction with the substrate is also reflected in the cell morphology and proliferation. The results showed that highly negative ζ - potentials between - 90 and - 3 mV led to a decreasing/reduced Ca2+ mobilization which correlates with reduced cell activity. Nearly neutral to moderate positive surfaces (ζ - potential + 1 to + 10 mV) i.e., PSS-terminated PEMs are able to promote cell adhesion and growth as demonstrated by an increased Ca2+ mobilization. The access to the intracellular Ca2+ stores, provided by the external stimulus, is now more effective and suggests a higher cell activity. Increasing the ζ - potentials up to ≈ + 50 mV (highly positive), i.e., PDADMA - terminated PEMs with pseudo-brushes, resulted in restricted cell viability and impaired Ca2+ mobilization, which led to a disturbed cell morphology and proliferation. In conclusion, only surfaces, terminated with i.e., PEI, with moderate positive charges (ζ - potential + 1 to + 10 mV) are able to improve the Ca2+ mobilization and thus the cell activity and proliferation. PEMs with a PSS termination provide negative 𝜁−potentials, onto which cells adhere, and proliferate. Therefore, they are a good alternative for surface functionalization for implant surfaces. In summary, the objective set at the beginning of the thesis is addressed within articles written as part of this thesis. It is possible to fabricate PEMs with modified CNTs to produce coatings that are electrically conductive with tunable sheet resistance, whether dry in air or immersed in an aqueous solution (Articles 1 and 2). Also, for pure PEMs, it is shown that with the right molecular weight of PEs and a certain number of bilayers, a suitable surface structure for cell adhesion can be produced (Article 3). Additional surface properties such as a suitable surface charge density can be provided by PEMs which can improve the cell activity as monitored with Ca2+ mobilization (Articles 4 and 5). The next step is to combine the knowledge gained from Articles 1 – 5 and link it to the application of external electrical fields to cells.
Survival, development, and function of cells depend on numerous signaling pathways or-
chestrating the response to external and internal stimuli. Besides the well-established signaling through reversible phosphorylation, the concept of specific, spatio-temporal redox modifi-
cations of protein cysteinyl and methionyl side chains that regulate the biological function of these proteins is supported by an overwhelming amount of data. Although the specific reduction of protein redox modifications has been studied intensively, the oxidation of protein side chains was thought to be a result of so-called ‘oxidative stress’. However, this term has been increasingly challenged, since signaling pathways depend on specific, spatio-temporal oxidation of target proteins, most likely catalyzed by specific enzymes. The discovery of MICAL (molecule interacting with CasL) proteins evinced
the first examples of specific oxidases in signal transduction in the redox regulation of cellular functions.As part of the semaphorin signaling pathway, MICAL proteins were characterized to stereospecifically oxidize methionyl residues in actin, thereby regulating actin deolymerization, a process important in neurogenesis and cell migration. This oxidation can be reversed by the specific methionine-R-sulfoxide eductase B1. Besides the regulation of actin dynamics, MICALs are involved in the regulation of cell proliferation and
apoptosis, and the production of hydrogen peroxide may qualify them as specific oxidases also for cysteinyl residues.
Es wurde eine Methode zur Herstellung ultradünner Filme aus Metall bzw. metallischen Verbindungen (Legierungen) etabliert. Die Struktur und die physikalischen Eigenschaften der Filme wurden untersucht. Die entwickelte Präparationsmethode beruht auf induzierter Filmkontraktion nach erzwungener Benetzung (iFCaFW). Die Filme bestehen aus ultradünnen vertikal heterostrukturierten Multischichten (2D-VHML), sie entstehen durch den Beschichtungsvorgang und bestehen aus jeweils einer nm-dicken metallischen Schicht (M) eingebettet zwischen zwei Metall(hydr)oxidschichten (MOxHy) im nm- bis sub-nm Bereich. Dieser vertikal heterostrukturierte Aufbau wurde bei allen untersuchten Filmmaterialien beobachtet. Alle in dieser Arbeit vorgestellten Schichtsysteme wurden unter atmosphärischem Druck hergestellt. Es konnten Substrate aus Silicium und Muskovit sowie aus Borosilikat- und Kalk-Natron-Glas (Objektträger) beschichtet werden. Jede, aus flüssigem Metall bzw. flüssiger Legierung hergestellte Schicht verfügt über eine feste (Hydr)oxidschicht an der Luftgrenzfläche. Diese feste (Hydr)oxidschicht fungiert als Substrat für die nächste darüber aufgebrachte Schicht aus flüssigem Metall bzw. flüssiger Legierung. Somit entstehen vertikal heterostrukturierte Multischichten durch identische Wiederholung des Beschichtungsvorgangs. Dies ist eine innovative und vergleichsweise umweltfreundliche Methode, um transparente, elektrisch leitfähige und lateral homogene nm-dünne ein- oder mehrschichtige Metallfilme herzustellen. Verwendet wurden Metalle mit sehr niedriger Schmelztemperatur (kleiner als 300 °C), wie Bismut, Gallium, Indium, Zinn und ihre Legierungen. Die hohe Oberflächenspannung der geschmolzenen Metalle und Legierungen sowie die Adhäsion mit der die (Hydr)oxidhaut dieser Metalle und Legierungen auf verschiedenen Substraten haftet ermöglicht die Beschichtungsmethode.
The layer-by-layer method is a robust way of surface functionalization using a wide range of materials, e.g. synthetic and natural polyelectrolytes (PEs), proteins and nanoparticles. Thus, this method yields films with applications in diverse areas including biology and medicine. Sequential adsorption of different oppositely charged macromolecules can be used to prepare tailored films with controlled molecular organization. In biomedical research, electrically conductive coatings are of interest. In manuscript 1, we investigated films sequentially assembled from the polycation poly (diallyldimethyl-ammonium) (PDADMA) and modified carbon nanotubes (CNTs), with CNTs serving as the electrically conductive material. We assume that charge transport occurs through CNT contacts. We showed that with more than four CNT/PDADMA bilayers, the electrical conductivity is constant and independent of the number of CNT/PDADMA bilayers. A conductivity up to 4∙10^3 S/m was found. It is possible to control the conductivity with the CNT concentration of the CNT deposition suspension. A higher CNT concentration resulted in thicker CNT/PDADMA bilayers, but in a lower conductivity per bilayer. We suspect that an increased CNT concentration leads to a rapid CNT adsorption without the possibility to rearrange themselves. If PDADMA then adsorbs on the disordered CNTs in the next deposition step, the average thickness of the polymer layer is thicker than on the more ordered CNT layer from the dilute solution. This leads to an increased PE monomer/CNT ratio and lower conductivity. More polycations between the CNT layers leads to less CNT contacts. Thus, the controlled composition of films can be used to fulfill specific requirements.
For many applications of polyelectrolyte multilayers (PEMs), cheap PEs with a broad distribution of molecular weights are used. It was unknown whether the distribution of molecular weights of the PE in the adsorption solution is maintained during the adsorption process and hence in the film. To investigate this, the PSS adsorption solution in article 2 consisted of a binary mixture of short and long poly (styrene sulfonate) (PSS). A good model system to study layered films in terms of composition are PDADMA/PSS multilayers. Neutron reflectivity and in-situ ellipsometry measurements were carried out to determine the PSS composition in the film and the growth regimes. At a mole fraction of long PSS of 5 % or more in solution, the exponential growth (which is characteristic of short PSS) is totally suppressed, and only long PSS is deposited in the resulting multilayer. Variation of adsorption time of PSS showed that short PSS first adsorbs to the surface but is displaced by long PSS. Between 0 and 5 % of long PSS in the adsorption solution exponential growth occurs. The fraction of short PSS in the film continuously decreases with the increase of long PSS in the adsorption solution. In the assembly of films prepared from binary PSS mixtures, the short PSS leaves the film through adsorption/desorption steps both during PSS adsorption and during PDADMA adsorption (as PDADMA/PSS complexes). Both techniques show that the composition of the film does not correspond to that of the deposition solution. The composition and thus the properties of the resulting multilayer are influenced by the choice of adsorption time. Moreover, we conclude that a multilayer grown from a polydisperse polyelectrolyte contains fewer mobile low molecular weight polymers than the deposition solution.
In manuscript 1 and article 2, the composition of multilayers was studied. In manuscript 1 adsorption kinetics were important for the arrangement of CNTs on the surface. In article 2, the adsorption kinetics, i.e. the diffusion of the polyelectrolytes to the surface, was also investigated. In article 3, we investigated the influence of the composition of the film as well as the preparation condition on the mobility of PEs in the film. The molecular weight of the polycation PDADMA and the NaCl concentration of the deposition solution were varied. The vertical PSS diffusion constant D_PSS within the PDADMA/PSS multilayers was measured using neutron reflectivity. The salt concentration of the preparation solution defines the polymer conformation during deposition. The molecular weight of the polycation determines the degree of intertwining. Together, both parameters determine the polyanion-polycation coupling and thus the PSS mobility within the network. Log−log display of D_PSS vs the molecular weight of PDADMA and fits to two power laws (D_PSS ∝ X_n(PDADMA)^(-m) ∝ M_w(PDADMA)^(-m)) reveals for films built from 10 or 200 mM NaCl a kink. Below and above the kink, the dependence of D_PSS on M_w(PDADMA) can be described by different power laws. For Χ_n(PDADMA) < X_n,kink(PDADMA) ≈ 288, the exponents are consistent with the predictions of the sticky reptation model. X_n(PDADMA) ≈ 288 is the entanglement limit. For Χ_n(PDADMA) > X_n,kink(PDADMA) ≈ 288, the decrease of D_PSS with M_w(PDADMA) is larger than below the entanglement limit, which is indicative of sticky reptation and entanglement. The PSS diffusion constant of films built from 100 mM NaCl drops three orders of magnitude when increasing the molecular weight of PDADMA from 45 kDa to 72 kDa. To figure out if an immobile PSS fraction exists in the film built from 72 kDa PDADMA (beyond the entanglement limit), the film was annealed at different conditions in article 4: both temperature and salt concentration were varied. For data analysis, the simplest model with two PSS fractions with different diffusion constants was used. These diffusion constants increase as the temperature of the surrounding solution is increased. As assumed in article 3, an immobile PSS fraction exists when annealing at room temperature. At higher annealing temperatures, at least two diffusion processes must be distinguished: the diffusion of the highly mobile PSS fraction through the entire film and a slow PSS fraction, mowing in a limited way. The choice of preparation conditions determines whether a polyelectrolyte multilayer can intermix completely. It is not clear if complete intermixing will ever occur for films built with PDADMA beyond the entanglement limit. It is possible that the diffusion is more complex. Long-term measurements will clarify this question. Calculating scattering length density profiles with subdiffusive behavior would be interesting and is a challenge for the future. Furthermore, immobile fractions are only visible with long annealing times. We hypothesize that an immobile or nearly immobile fraction is present whenever the dependence of D_PSS on the molecular weight of PDADMA cannot be described by the sticky reptation. To verify this hypothesis, further studies are necessary.
All results presented and discussed in the manuscript and articles show that by varying the preparation conditions, tailored films can be built. The composition of the film is also determined by the adsorption kinetics. In addition, the mobility of the PEs within the multilayers can be controlled by varying the conformation, mingling and entanglement of the chains within the film. The influence of the salt concentration in the preparation solution on the growth regimes during film formation is part of our future research. It is planned to investigate films built of different PDADMA molecular weights under varied annealing conditions to better understand the mobile and immobile fractions.
The goal of this thesis was to characterize the properties of tetramyristoyl cardiolipin (TMCL) and several environmental influences on it. This included investigating the pH and temperature dependency of TMCL as well as the influences of ROS on TMCL and exam-ining the lipid-protein interactions between TMCL and cytc. Furthermore, I extended the research to the analysis of binary mixtures composed of TMCL and dimyristoyl phosphati-dylcholine (DMPC). To this end, I investigated the samples with the aid of the Langmuir monolayer technique. This method allowed me to mimic interactions occurring at the membrane surface as it represents one membrane layer. The recording of π-A isotherms was also coupled with further other techniques like Brewster angle microscopy (BAM), Infrared Reflection-Absorption Spectroscopy (IRRAS), Grazing Incidence X-Ray Diffraction (GIXD) and Total Reflection X-Ray Fluorescence (TRXF) to enable a more comprehensive monolayer study. In addition, some systems were analyzed using Thin-layer Chromatography (TLC) and/or Differential Scanning Calorimetry (DSC) to be able to draw conclusions about sample composition or characteristic temperatures, respectively.