52.70.Ds Electric and magnetic measurements
Refine
Document Type
- Doctoral Thesis (3)
Language
- English (3)
Has Fulltext
- yes (3)
Is part of the Bibliography
- no (3)
Keywords
- Plasma (2)
- Alfvén-Welle (1)
- Atmosphärendruckentladung (1)
- Driftwelle (1)
- Dynamik (1)
- Expansion (1)
- Gasentladung (1)
- Magnetischer Sensor (1)
- Parallelstrom (1)
- Plasmadiagnostik (1)
Institute
This thesis investigated dielectric barrier discharges (DBDs) in N2-O2 gas mixtures at atmospheric pressure, with a focus on the gas discharge physics. The main goal was to evaluate whether possible control mechanisms exist that can manipulate the breakdown and the development of DBDs, especially for pulsed operation. To examine the pre-breakdown phase, the actual breakdown and the main DBD development, DBDs in a double-sided, single filament arrangement with a 1 mm discharge gap were investigated by means of electrical and optical diagnostics with high resolutions. Spectrally- and temporally-resolved iCCD pictures (2D in space), spectrally- and spatio-temporally-resolved streak camera and CCS images (1D in space) were simultaneously recorded accompanied by a full electrical characterisation with fast voltage and current probes. Sinusoidal- and pulsed-driven DBDs were found to have a qualitatively similar spatio-temporal development, i.e. a cathode-directed ionisation front (v ~ 10^6 m/s, positive streamer mechanism), followed by a transient glow-like phase in the gap. For sinusoidal operation, the slope of the applied voltage is flat (dU/dt ~ 1 V/ns) compared to pulsed operation (dU/dt ~ 100 V/ns). Thus, during the longer pre-phase of the sine-driven DBD, many more charge carriers were generated, in contrast to the pulsed-driven DBDs, where the pre-phase is limited by the short voltage rise time. Consequently, just before the breakdown occurs, the charge carrier density is higher for sine-driven DBDs, i.e. the positive streamer starts in a highly pre-ionised environment, which leads to a lower propagation velocity. In addition to limiting the pre-phase (lower pre-ionisation), the steep voltage slope of the pulsed DBD amplifies the streamer breakdown because the applied voltage rises significantly during its propagation. Therefore, the transferred electrical charge and the electrical power of a single DBD can be controlled by the applied voltage amplitude, but only in pulsed operation. In addition to the effects of different voltage slope steepness, the pulse width is an excellent parameter in the pulsed operation to set the pre-ionisation, by shifting the DBDs into the after-glow of the previous discharge using asymmetrical HV pulse waveforms. The subsequent DBDs ignite in different pre-ionised conditions, defined by the residual charge carrier densities in the gap that originated from the previous DBD. The breakdown characteristics of these DBDs could be controlled down to the fundamental level. This thesis has described for the first time four different breakdown regimes in single filament DBDs for 0.1 vol% N2 in O2 and connected them to the processes during their pre-phases. The “classic” DBD development (a cathode-directed streamer followed by a transient glow discharge) could be controlled in a certain range, followed by a transition first to a breakdown regime featuring a simultaneous propagation of a cathode- and an anode-directed streamer, and finally to a reignition of the previous DBDs without any propagation, just by reducing the pulse width (time between two subsequent DBDs), i.e. increasing the pre-ionisation level. All differences between the DBDs at rising and falling slopes could be explained by the different pre-conditions in the gap. The O2 concentration in the N2-O2 gas mixtures offers another way of controlling the pre-ionisation. Due to the electron attachment as a consequence of the electronegativity of oxygen, the electron density decreases for higher O2 admixtures. Furthermore, the differences in the first Townsend ionisation coefficient and in the photo-ionisation between N2 and O2 influence the DBD behaviour as well. To some extent, some of the reported effects achieved by varying the pulse width at a fixed O2/N2 ratio were also observed for a fixed pulse width and changing O2 concentration. Hence, the response of the DBD properties to changing pre-ionisation levels seems to be a general principle of DBD control. Additional effects of the O2/N2 ratio, such as an increasing DBD inception jitter or higher streamer velocities, were also reported. Finally, a reverse of the effects induced by the O2 admixture such as DBD emission duration or DBD inception delay, was observed for O2 concentrations below 0.01 vol%, and were especially pronounced at a pressure of 0.5 bar. For 0.1 vol% O2 in N2, a minimal electron recombination rate was found, which can be explained by the different decay and recombination rates of positive nitrogen and oxygen ions. These different rates effect the charge carrier dynamics and consequently, the pre-ionisation in the gap. In conclusion, this investigation has highlighted the importance of volume memory processes on the breakdown and development of single filament DBDs at elevated pressures.
The present thesis deals with dynamic structures that form during the expansion of plasma into an environment of much lower plasma density. The electron expansion, driven by their pressure, occurs on a much faster time scale than the ion expansion, owed to their mobility. The high inertia of the ions causes the generation of an ambipolar electric field that decelerates the escaping electrons while accelerating the ions. The ambipolar boundary propagates outwards and forms a plasma density front. For a small density differences, the propagation of the front can be described with the linear ansatz for ion acoustic waves. For a large density differences, experiments have shown that the propagation velocity of such a front is still related to the ion sound velocity. However, the reported proportionality factors are scattered over a wide range of values, depending on the considered initial and boundary conditions. In this thesis, the dynamics during plasma expansion are studied with the use of experiments and a versatile particle-in-cell simulation. The experimental investigations are performed in the linear helicon device Piglet. The experiment features a fast valve, which is used to shape the neutral gas density profile. During the pulsed rf-discharges, plasma is generated in the source region and expands collisionless into the expansion chamber. The computer simulation is tailored very close to the experiment and provides a deeper insight in the particle kinetics. The experimental results show the existence of a propagating ion front. Its velocity is typically supersonic and depends on the density ratio of the two plasmas. The ion front features a strong electric field. The front can have similar properties to a double layer is not necessarily a double layer by definition. The computer simulation reveals that the propagating electric field repels the downstream ambient ions. These ions form a stream with velocities up to twice as high as the front velocity. The observed ion density peak is due to the accumulation of the repelled ions and is located at their turning point. The ion front formation depends strongly on the initial ion density profile and is part of a wave-breaking phenomenon. The observed front is followed by a plateau of little plasma density variation. This could be confirmed for the expansion experiment by a comparison with virtual diagnostics in the computer simulation. The plateau has a plasma density determined by the ratio between the high and low plasma density. It consists of streaming ions that have been accelerated in the edge of the main plasma. The presented results confirm and extend findings obtained by independent numerical models and simulations.
Electromagnetic Drift Waves
(2010)
In the rf-plasma of the linear magnetized VINETA experiment, different types of low-frequency waves are observed. The emphasis in this work is on the interaction mechanism between drift waves on the one and kinetic Alfven waves on the other hand. In the peaked density profile of the plasma column drift waves occur as modulation of the plasma density. As gradient driven instability, they draw their energy from the radial density gradients. Alfven waves as magnetic field fluctuations are stable in the present configuration. They are launched by a magnetic excitation antenna. Parallel conduction currents in the plasma are common to both wave phenoma. A B-dot probe as standard diagnostic tool is used to detect the fluctuating magnetic fields of both wave types. The challenge are the small induced voltages due to the low wave frequency. The probe design with an integrated amplifier close to the probe head takes this into acount. The developed B-dot probe is mounted to different positioning systems to characterize both wave phenomena. For Alfven waves, the dispersion relation is recorded experimentally. It is found to be in good agreement with the prediction of the Hall-MHD theory with included resistive term, accounting for the cold collisional plasma. The fluctuating magnetic field pattern is recorded with azimuthal scans. The current density is obained by Amperes law. It is concentrated in helically twisted current filaments. For the unstable drift waves, similar investigations are done with simultaneously recorded density fluctuations. In the azimuthal plane, the locations of the parallel current filaments and the fluctuating density are found to be in phase, supporting the predicted drive of parallel currents by pressure gradients. A mutual influence of the two wave types is observed in an interaction experiment. Assuming parallel currents as coupling quantity, an interpretation of the experimental findings is given based on the linear theory of drift waves.