Doctoral Thesis
Refine
Year of publication
Document Type
- Doctoral Thesis (26) (remove)
Has Fulltext
- yes (26)
Is part of the Bibliography
- no (26)
Keywords
- Plasmaphysik (26) (remove)
Institute
Diese Dissertation beschäftigt sich mit der Erzeugung von edelmetallfreien Katalysatoren für die Sauerstoffreduktion in Brennstoffzellen. Dabei wird ein neuartiger, dualer Plasmaprozess entwickelt, aufgebaut und die so-erzeugten Schichten mit verschiedenen elektrochemischen (CV, RDE und RRDE) und strukturanalytischen Methoden (SEM, EDX, IR, XPS, Leitfähigkeit, XRD, NEXAFS, EXAFS und TEM) untersucht. Auf diese Weise ist es erstmalig gelungen edelmetallfreie Katalysatoren mit einem Plasmaprozess herzustellen, ohne dass eine zusätzliche Pyrolyse benötigt wird. Die katalytische Aktivität der Schichten ist außerdem deutlich höher als die von rein chemisch hergestellten Metall–Polypyrrol-Schichten.
Particle and heat transport in fusion devices often exceed the neoclassical prediction. This anomalous transport is thought to be produced by turbulence caused by microinstabilities such as ion and electron-temperature-gradient (ITG/ETG) and trapped-electron-mode (TEM) instabilities, the latter ones known for being strongly influenced by collisions. Additionally, in stellarators, the neoclassical transport can be important in the core, and therefore investigation of the effects of collisions is an important field of study. Prior to this thesis, however, no gyrokinetic simulations retaining collisions had been performed in stellarator geometry. In this work, collisional effects were added to EUTERPE, a previously collisionless gyrokinetic code which utilizes the δ f method. To simulate the collisions, a pitch-angle scattering operator was employed, and its implementation was carried out following the methods proposed in [Takizuka & Abe 1977, Vernay Master's thesis 2008]. To test this implementation, the evolution of the distribution function in a homogeneous plasma was first simulated, where Legendre polynomials constitute eigenfunctions of the collision operator. Also, the solution of the Spitzer problem was reproduced for a cylinder and a tokamak. Both these tests showed that collisions were correctly implemented and that the code is suited for more complex simulations. As a next step, the code was used to calculate the neoclassical radial particle flux by neglecting any turbulent fluctuations in the distribution function and the electric field. Particle fluxes in the neoclassical analytical regimes were simulated for tokamak and stellarator (LHD) configurations. In addition to the comparison with analytical fluxes, a successful benchmark with the DKES code was presented for the tokamak case, which further validates the code for neoclassical simulations. In the final part of the work, the effects of collisions were investigated for slab and toroidal ITGs and TEMs in a tokamak configuration. The results show that collisions reduce the growth rate of slab ITGs in cylinder geometry, whereas they do not affect ITGs in a tokamak, which are mainly curvature-driven. However it is important to note that the pitch-angle scattering operator does not conserve momentum, which is most critical in the parallel direction. Therefore, the damping found in a cylinder could be the consequence of this missing feature and not a physical result [Dimits & Cohen 1994]. Nonetheless, the results are useful to determine whether the instability is mainly being driven by a slab or toroidal ITG mode. EUTERPE also has the feature of including kinetic electrons, which made simulations of TEMs with collisions possible. The combination of collisions and kinetic electrons made the numerical calculations extremely time-consuming, since the time step had to be small enough to resolve the fast electron motion. In contrast to the ITG results, it was observed that collisions are extremely important for TEMs in a tokamak, and in some special cases, depending on whether they were mainly driven by density or temperature gradients, collisions could even suppress the mode (in agreement with [Angioni et al. 2005, Connor et al. 2006]). In the case of stellarators it was found that ITGs are highly dependent on the device configuration. For LHD it was shown that collisions slightly reduce the growth rate of the instability, but for Wendelstein 7-X they do not affect it and the growth rate showed a similar trend with collisionality to that of the tokamak case. Collisions also tend to make the ballooning structure of the modes less pronounced.
Impurity ions pose a potentially serious threat to fusion plasma performance by affecting the confinement in various, usually deleterious, ways. Due to the creation of helium ash during fusion reactions and the interaction of the plasma with the wall components, which makes it possible for heavy ions to penetrate into the core plasma, impurities can intrinsically not be avoided. Therefore, it is essential to study their behaviour in the fusion plasma in detail. Within the framework of this thesis, different problems arising in connection with impurities have been investigated. 1. Collisional damping of zonal flows in tokamkas: The effect of impurities on the collisional damping of zonal flows is investigated. Since the Coulomb collision frequency increases with increasing ion charge, heavy, highly charged impurities play an important role in this process. The effect of such impurities on the linear response of the plasma to an external potential perturbation, as caused by zonal flows, is calculated with analytical methods and compared with numerical simulations, resulting in good agreement. 2. Impurity transport driven by microturbulence in tokamaks: Fine scale turbulence driven by microinstabilities is a source of particle and heat transport in a fusion reactor. A semi-analytical model is presented describing the resulting impurity fluxes and the stability boundary of the underlying mode. The results are compared with numerical simulations. Both the impurity flux and the stability boundary are found to depend strongly on the plasma parameters such as the impurity density and the temperature gradient. 3. Pfirsch-Schlüter transport in stellarators: Due to geometry effects, collisional transport plays a much more prominent role in stellarators than in tokamaks. Analytical expressions for the particle and heat fluxes in an impure, collisional plasma are derived from first principles. Contrary to the tokamak case, where collisional transport is exclusively caused directly by friction, in stellarators an additional source of transport exists, namely pressure anisotropy. Since this term is, contrary to the contribution from friction, non-ambipolar, it plays an important role regarding the ambipolar electric field. Furthermore, the behaviour of heavy impurities in the presence of strong radial temperature and density gradients is studied, which lead to a redistribution of the impurities on the flux surfaces. As a consequence, the radial impurity flux is decreased considerably compared with a plasma in which the impurities are evenly distributed on the flux surfaces.
Turbulence is a state of a physical system characterized by a high degree of spatiotemporal disorder. Turbulent processes are driven by instabilities exhibiting complex nonlinear dynamics, which span over several spatial as well as temporal scales. Apart from fluids and gases, turbulence is observed in plasmas. While turbulent mixing of a system is sometimes a desired effect, often turbulence is an undesired state. In hot, magnetically confined plasmas, envisaged for energy generation by thermonuclear fusion, plasma turbulence is clearly a problem, since the magnetic confinement time is drastically deteriorated by turbulent transport. Hence, a control mechanism to influence and to suppress turbulence is of significance for future fusion power devices. An important area of plasma turbulence is drift wave turbulence. Drift waves are characterized by currents parallel to the ambient magnetic field, that are tightly coupled to a coherent mode structure rotating in the perpendicular plane. In the present work, the control of drift waves and drift wave turbulence is experimentally investigated in the linear magnetized helicon experiment VINETA. Two different open-loop control systems - electrostatic and electromagnetic - are used to drive dynamically parallel currents. It is observed that the dynamics of the drift waves can be significantly influenced by both control schemes. If the imposed mode number as well as the rotation direction match those of the drift waves, classical synchronization effects like, e.g., frequency locking, frequency pulling, and Arnold tongues are observed. These confirm the nonlinear interaction between the control signal and the drift wave dynamics. Finally, the broadband drift wave turbulence, and thereby turbulent transport, is considerably reduced if the applied control signal is sufficiently large in amplitude.
The main objective of this work is to contribute to the understanding of the grafting of nitrogen and amino surface functional groups on polymers by means of plasmas containing nitrogen and hydrogen. For this purpose, many aspects of plasma surface modification were studied. In the frame of this work, a new, UHV-sealed plasma reactor system was put into operation. The system is special for its clean reaction environment and the possibility to perform quasi in situ XPS measurements. A comparison of the UHV system to a fine vacuum reactor showed that a clean reaction environment is mandatory for reproducible plasma processing and efficient nitrogen and amino functionalisation. A key motivation for the present work was the observation that the non-coating plasma processes reported in literature fail to graft primary amino groups on polymer surfaces with densities that significantly exceed 3 - 4% NH2/C. In order to investigate this phenomenon in detail, this work followed two experimental tracks: On the one hand, a broad systematic study of plasma processing parameters was performed. On the other, the surface diagnostics methods used for the quantification of amino groups were critically reviewed. For this, a numerical algorithm was developed to reconstruct the element depth profile from angle-resolved XPS data. In the scope of the process parameter study, cw and pulsed microwave (MW) plasma excitation was compared to radio-frequency (RF) excitation. The home-built MW source was studied and optimised with respect to ignition behaviour and power efficiency. The performance of the MW and RF plasmas in polymer surface modifications was studied in various gas mixtures containing NH3 and H,, or N2 and H,. Also the differences of glow and afterglow processing of polymers were investigated. Large variations of the nitrogen and primary amino grafting efficiencies were obtained. They triggered a number of new ideas for the underlying reaction mechanisms. Special attendance was devoted to the selectivity of the functionalisation processes for primary amino groups. Nitrogen-containing discharges that were rich in hydrogen achieved selectivities up to 100%. The upper limit of 3 - 4% amino groups on the surface, however, was not passed. Angle-resolved XPS measurements revealed a systematic problem for the definition of a surface density, which is capable of explaining the upper limit for amino groups. It is either due to a limited labelling depth of amino groups by the applied TFBA derivatisation reaction, or to a limited functionalisation depth of the plasma process. One very efficient nitrogen-grafting plasma process that was developed on polystyrene was applied to seven other unfluorinated polymers. The similarity of the resulting functionalisation demonstrated a good transfer-ability of plasma surface functionalisation processes. Plasma treatments of polymer surfaces, especially in hydrogen-containing gases, are known to be generally followed by uncontrollable oxidation phenomena. The properties of plasma-functionalised polymer surfaces were therefore studied in conjunction with ageing effects. Quasi in situ XPS analysis allowed to distinguish the influence of oxygen contamination during the plasma process from post-process oxidation due to contact of plasma-treated samples to atmospheric oxygen. The surface modification experiments were accompanied by several gas phase diagnostic techniques. In the scope of this work, the UHV reactor system was equipped with optical emission spectroscopy (OES), two-photon absorption laser-induced fluorescence (TALIF), and tunable diode laser absorption spectroscopy (TDLAS). A separate plasma source was setup to perform an absolute quantification of the vacuum-ultra-violet (VUV) emission intensity of hydrogen-containing MW-excited plasmas. The techniques were evaluated with respect to their contribution to an understanding of the plasma processing of polymers. The rich experimental data allowed to suggest new reaction mechanisms for the grafting of nitrogen- and amino functional groups. Surface passivation experiments in H, plasmas of nitrogen-functionalised surfaces initiated a re-evaluation and an extension of the mechanism of selective etching [1]. Together with two other new reaction mechanisms, a hypothetical reaction scheme was suggested. It was studied by the help of two numerical models for heterogenous reactions of radicals with the surface. In order to avoid the complexity of the fragmentation process of NH,, the models were restricted to discharges in N, and H9. Despite the sparse information on the composition of the gas phase, the data of two experimental series showed a very particular phenomenology that allowed a first test of the model. The test supports the newly-suggested reaction mechanisms. Especially the role of NH2 attachment to open reaction sites for the grafting of amino groups was emphasised. A more stringent test of the model is left to future experiments with extended gas phase diagnostic means.
Within the scope of this work, a versatile large linear magnetised plasma experiment was designed, constructed, and subsequently put into operation. The magnetised plasma was used to investigate the dispersion of whistler waves (circular polarised electromagnetic waves) with regard to the influence of the plasma boundaries. After a brief review over electromagnetic plasma waves and the three discharge modes of a helicon source, the experimental device and the diagnostic tools are explained in detail. Great attention is devoted to the identification of a reliable, calibrated magnetic fluctuation probe design. To the understanding of dynamical phenomena in ionospheric plasmas, whistler wave measurements in laboratory experiments may contribute significantly because of the ability to vary plasma parameters and to do measurements with high spatial and temporal resolution. However, the boundaries of laboratory experiments change the dispersion behaviour of whistler waves significantly if compared to the unbounded ionospheric situation. The influence of the plasma boundary is studied in the present work on three different levels of increasing complexity. First, a high density, small wavelength regime is established to make the effect of the boundary negligible. Measurements are in full agreement with whistler wave theory for unbounded plasma geometry. Measurements below the ion cyclotron frequency reveal the strong influence of the ion dynamics on whistler wave propagation, but are not straightforward to interpret in terms of dispersion theory. Second, the other limit case is examined: bounded plasma helicon modes. These waves are, mathematically speaking, eigenfunctions of the plasma-boundary system and are of great practical importance for high density plasma discharges, the helicon source. Careful measurements of the equilibrium plasma parameters as well as the magnetic fluctuation profiles of the helicon source are done in all three modes of operation, the capacitive, inductive, and helicon wave sustained mode. The first two modes are fairly well understood and the measurements are consistent with existing models. The high density helicon mode, however, is still a scientific case. The measurements partially confirm existing assumptions. It is demonstrated that the plasma production is detached from the antenna edge region. Moreover, it is shown that the plasma parameters are self-consistently determined by the antenna geometry and the discharge parameters according to basic helicon wave theory. Finally, it is ruled out that the plasma density is the control parameter determining the transition point into the high density helicon mode. The measurements rather suggest that the rf power density is the important value. As a third aspect, whistler waves in an intermediate wavelength regime are studied and the transition from unbounded to bounded plasma wave dispersion is systematically investigated. It is shown both experimentally and numerically that the wave dispersion in a plasma filled metal waveguide cannot be determined solely from wave vector measurements parallel to the magnetic field. For a correct description, the perpendicular mode profile has to be correctly taken into account. In contrast to simple helicon wave theory, it is demonstrated that the perpendicular mode profile is not only determined by the conducting vessel boundaries alone but the entire plasma-boundary system has to be considered as a unity. To summarise, this work has contributed to a better understanding of the physics of the propagation of whistler waves, where the particular role of metal boundaries acting as wave guides was highlighted. This basic science approach to the waves' dynamics is believed to be of significance in the course of the scientific debate on the physics principles of helicon discharges.