Refine
Document Type
- Doctoral Thesis (5)
- Article (3)
Language
- English (8)
Has Fulltext
- yes (8)
Is part of the Bibliography
- no (8)
Keywords
- - (3)
- Black Sea (2)
- subterranean estuary (2)
- Armenia (1)
- Baltic Sea (1)
- Benthic solute reservoirs (1)
- Biogeochemistry (1)
- Dansgaard-Oeschger Zyklen (1)
- Dansgaard-Oeschger cycles (1)
- Diagenesis (1)
Institute
- Institut für Geologische Wissenschaften (8) (remove)
Publisher
The thesis contains 6 chapter and mentions about the influences of sea level change, climate, tectonic into the sedimentary process. The results show that late Pleistocene facies mostly are weathered facies which content gibbsite-kaolinite, limonite. In transgression, facies assemblage includes lagoon, tidal and estuary. The composition are in-situ reworked minerals like illite, gypsum. In regression, facies are shallow marine, prodelta, delta front, distributary lobe, swamp, tidal and beach, channel infill, flood plain, lake. Abundant minerals are named like smectite, illite, chlorite, quartz, feldspar, rock fragments, gypsum.Gypsum is the evaporited mineral easily to be formed in coastal environment of Red River Delta. It is a good indicative mineral for distinguishing the deposits formed in dry season of monsoon regions. Smectite is good indicative mineral for sea environment which mostly related with the transference and low accumulation and new formed in climate with wet and dry periods. Kaolinite-gibbsite is an indicator of strong chemical weathering with high precipitation. The stratigraphy can be divide into trangressive systems tract (10-8.5 cal. kyr BP) and highstand systems tract with aggradational-progradational parasequence set (8.5-6.5 cal. kyr BP) and progradational parasequence set (6.5 cal. kyr BP-today, with subsets 6.5-4.0; 4.0-1.5; and 1.5-0.0 cal. kyr BP). The subsidence process which reflex in accumulation rate regarded to not only sea level change, tectonics but also human impact - dyke build plays the main role to increased sedimentary thickness. The influence of source variation and climate change are recorded on mineral composition. In late Pleistocene, materials are chemical weathering authigenic components during warm/wet climate. In transgression, dominated materials are reworked terrigenous and chemical weathering components during warm/dry and cool/wet climate. In regression, materials are low maturity, suffered by physical weathering transported from surrounding mountains during 3 warm/dry or wet - cool/dry or wet big climate cycles.
The Black Sea experienced fundamental environmental changes during the last glacial-interglacial transitions. During the last 670,000 years, the Black Sea was at least twelve times connected to Mediterranean Sea, received saltwater via the Bosporus strait, and evolved to a brackish anoxic water body. A lowered global sea level during glacials caused isolation of the basin from the open ocean, and the Black Sea became limnic and well-oxygenated. The last glacial-interglacial history of the Black Sea is relatively well understood and demonstrates the high sensitivity of this basin to global climate and environmental changes. Previous studies particularly focussed on the evolution during the last glacial with meltwater pulses, warming during the glacial-interglacial transition, and the development from a ventilated lake to the present euxinic/brackish water body. Apart from the interglacial warming, the Black Sea sediments clearly recorded short-term abrupt temperature changes associated with cooling during Heinrich events and the Younger Dryas as well the Bølling-Allerød warming, which occurred over the northern hemisphere. However, our knowledge about the Black Sea history before 40,000 BP is comparatively poor even though crucial for understanding hemisphere-wide atmospheric teleconnection patterns and climate mechanisms during older glacials and interglacials. A multiproxy approach has been applied on three gravity cores and surface sediment from the southeastern Black Sea comprising ostracod geochemistry (Mg/Ca, Sr/Ca, U/Ca, 87Sr/86Sr), major and trace elements (Al, Ca, Fe, K, Ti, Mo, Re, Sr, W, Zr) and organic biomarkers (n-alkanes, alkenones, UK’37-palaeotemperatures, glycerol dialkyl glycerol tetraethers, TEX86-palaeotemperatures, BIT-index). The cores cover the last 134,000 a and provide new findings concerning the last and penultimate glacial-interglacial transitions (12,000- 0 a BP; 134,000-120,000 a BP) as well as the abrupt climate changes during the last glacial period (64,000-20,000 a BP). The major topics of this work are i) the penultimate glacial-interglacial transition (Saalian-Eemian), ii) the environmental conditions in the Black Sea “Lake” during abrupt climate oscillations of the last glacial period, iii) and the comparison of the redox evolution during Eemian and Holocene sapropel formation. Two meltwater pulses caused a pronounced freshening of the Black Sea “Lake” during the ending penultimate glacial, which originated from the melting Fennoscandian Ice Sheet. Due to unusually high radiogenic Sr-isotope signatures of benthic ostracods, a potential Himalayan source communicated via the Caspian Sea is also likely. During the glacial-interglacial transition the temperatures in the Black Sea increased from 9°C to 17°C and the associated global sea-level rise allowed the reconnection between the Mediterranean and Black Seas around 128,000 a BP. Eemian sapropel formation started shortly after the intrusion of saltwater and the water body became gradually euxinic. In comparison with the Holocene sapropel, the Eemian proxy records imply warmer and stronger euxinic conditions and distinctly higher enrichments of redox-sensitive trace elements like e.g. Mo, Re, and W. Because the seawater forms the ultimate source for several trace metals, these enrichments were most likely favoured by the higher salinity due to a ca. 10 m higher sea level and enhanced Mediterranean Sea - Black Sea water exchange. Based on biomarker analyses, lake surface temperatures could be calculated for the first time for the period between 64,000 and 20,000 a BP, which includes the Marine Isotope Stage (MIS) 3. Abrupt stadial/interstadial temperature changes with amplitudes of up to 4°C in the Black Sea “Lake” clearly resemble the Greenland Dansgaard-Oeschger pattern. However, an exceptional cooling during the so-called Heinrich events is not evident from our cores. This finding agrees with modelling results proposing a deeper penetration of regular Dansgaard-Oeschger cycles into the Eurasian continent when compared with the Heinrich events. During the warm and more humid interstadials, the Black Sea “Lake” became fresher and more productive and the water level probably increased. During the colder and more arid stadials the freshwater supply was decreased and productivity was low. Aridity and stronger westerly winds favoured the input of aeolian transported detritus. The long-term pattern from 64,000 to 20,000 a BP demonstrates a strong influence of orbital-driven changes in the Eurasian ice volume and associated atmospheric circulation patterns over the Black Sea region. The present multi-proxy study demonstrates that the sediments from the SE Black Sea clearly record not only orbital- but also millennial-scale climate and environmental changes and thus represent an important continental archive for climate change bridging the North Atlantic-Eurasian corridor.
The aims of this study were to quantify the key mineralization processes and the resulting nutrient release potentials of different sediment types, their ranges of extent and dependency on varying environmental conditions such as seasonal variations or shifts in oxygen availability. Benthic phosphate fluxes and flux potentials were of particular interest as P is an essential nutrient for algal growth in marine systems and phosphate is often limiting primary production, hence strongly promotes the production of new biomass. A major P source in marine environments are mineralization products of early diagenetic processes.
To gain insight into the pathways of organic matter mineralization and subsequent secondary reactions, key reactants in the solid and the dissolved phase were considered in typical sediments of the Baltic Sea and the Black Sea. Seven study sites in the German Baltic Sea region, representative of the major depositional environments, including coarse and fine grained sediments, both rich or poor in organic carbon, were intensively studied. The investigations were conducted on a seasonal basis during ten ship-based expeditions between July 2013 and March 2016, covering spring- and autumn algal blooms, stagnation periods with bottom water hypoxia and winter dormancy. Hypoxic conditions frequently developed in the bottom waters of the Bay of Mecklenburg, Stoltera and the Arkona Basin sites, shallower stations like the Tromper Wiek, the Oder Bank and the Darss Sill were usually not affected by hypoxia. Increased nutrient concentrations in the bottom waters coincided with oxygen depletion. High salinity dynamics were observed in the bottom waters above the studied sediments, which were due to frequent salt water inflows from the North Sea. Bottom water temperature variability was seasonally conditioned.
The studied sands showed 2-3 orders of magnitude higher permeability values and about one order of magnitude lower organic matter contents compared to the studied muds. Occasionally, strongly increased organic matter contents were observed in the sands, likely induced by downward mixing of plankton bloom derived particles. The organic matter was found to be essentially supplied by marine phytoplankton, indicated by its elemental composition and isotopic signature.
Additionally, an adapted approach of the Keeling plot method was made to characterize the source material of organic matter mineralization. In marine environments, dissolved inorganic carbon concentrations often increase with depth together with an isotopic carbon signature shift to lighter values due to organic matter mineralization. The Keeling plot method was commonly used to determine the isotopic signature of carbon sources for ecosystem respiration. Conventionally, the influence of respiratory depletion of 13CO2 on the isotopic composition of the atmosphere was studied in terrestrial and limnic biogeochemistry. The same approach was applied on organic matter mineralization in sediments and the water column during this study. Mixing of bottom water derived background DIC and DIC released into the environment during organic carbon decomposition was assumed. In a modification of previous approaches, where changes in concentration and δ13C of DIC were followed over time, vertical profiles were analyzed in this study, which represent time-dependent variations superimposed by transport processes . DI13C gradients in the water column of the Black Sea and pore water profiles in the Black Sea and the Baltic Sea were used to estimate the 13C signature of the mineralized organic carbon via Keeling plot analysis. The Black Sea water column revealed a δ13C signature of the organic matter source close to the signature of typical particulate organic matter in the ocean and previously reported values for the Black Sea euphotic zone. In the pore waters of Black Sea sediments (from short and long sediment cores), Keeling plot analysis clearly demonstrates that the released DIC at depth can be derived from different sources. An isotopically very light carbon source (< –60 ‰) was associated with anaerobic oxidation of methane in the Black Sea. Marine organic matter was the principal source for DIC in the deeps of Baltic Sea basins, while the calculated carbon source isotopic signature in sediments of sand flats and bays was shifted to heavier δ13C signatures compared to marine organic matter. These shifts were attributed to potential dissolution of sedimentary carbonates or organic inputs of terrestrial C4 vascular plants like maize and other agricultural plants. The carbon source isotopic composition calculated via Keeling plot analysis correlated well with directly measured δ13C signatures of surface sediments POM.
Organic matter mineralization activity in the southern Baltic Sea sediments was studied via gross sulfate reduction rate analysis and total oxygen uptake measurements in sands and muds. Oxygen penetration depths were less than 4 mm in both, muddy and sandy sediments. Oxygen uptake rates were similar in muds (10.2 mmol m–2 d–1) and sands (10.7 mmol m–2 d–1), while significantly higher rates were measured in the coastal near sites of the Bay of Mecklenburg (about 12 mmol m–2 d–1) than in the deeper Arkona Basin (about 9 mmol m–2 d–1). Substantial sulfate reduction was measured in the muddy (about 4 mmol m–2 d–1) and the sandy (about 1 mmol m–2 d–1) study sites. Highest sulfate reduction rates (4.4 – 5 mmol m–2 d–1) were detected in the muds of the Bay of Mecklenburg during summer, about twice as high as in the Arkona Basin muds. Increased mineralization activity of the coastal near muds of the Bay of Mecklenburg is attributed to enhanced input of fresh organic matter during algal blooms.
About twofold higher oxygen consumption and sulfate reduction rates were measured in summer compared to winter in sandy and muddy sediments.
The studied sites were usually characterized by a typical biogeochemical zonation with oxic, suboxic and sulfidic zones. The concentration profiles in the muds reflected sulfate reduction and secondary redox-reactions, liberating dissolved carbon, nitrogen, phosphorus and hydrogen sulfide into the interstitial waters. Orders of magnitude lower concentrations were detected in the sands, while their top centimeters were mostly irrigated and mineralization products only accumulated below.
A several centimeter thick suboxic zone was sustained by active downward transport of oxidized material in the southern Baltic Sea coastal sediments, presumably mainly through bioturbation. Especially sulfur and iron species were involved in the secondary reactions between the metabolites of early diagenetic processes occurring in the suboxic zone. Partly high temporal variability was observed in the form of vertical migration of the sulfidic zone and a corresponding expansion and shrinking of the suboxic zone. The Arkona Basin site showed the most stable geochemical zonation over time, while the Luebeck Bight site and especially the Mecklenburg Bight site showed striking dynamics. The consequent redox-regime shifts within the surface sediments might promote mineralization of organic matter as higher sulfate reduction rates and higher total oxygen uptake were measured in these more dynamic muds. The vertical shifts of the redox-gradients can largely be explained by temporal and spatial variability of bioturbation activity, but also anthropogenic activities may play a role. Bottom trawling, may be the dominant mixing process at the Mecklenburg Bight site.
In the sands, less reactive iron and manganese contents were available compared to the studied muds, which may be due to frequent irrigation of the top centimeters leading to a loss of pore water reservoirs like dissolved Fe and Mn.
Another mixing process, storm induced sediment resuspension, was suggested to be important for the sediments in the study area. A severe sediment resuspension event at the silty Tromper Wiek site was indicated by steep gradients in pore water concentration and particulate mater content profiles in the top ∼ 5 cm sediments. Carrying out non steady state modeling (Bo Liu, IOW), the successive re-development of the pore water profiles towards a steady-state was simulated and the time span necessary to establish measured pore water profiles after the sediment disturbance event was approximated. In the predicted time span, daily average wind speeds reached an annual high of the category ‘gale’ which was probably sufficient to resuspend and irrigate the surface silt-type sediments.
This study showed that sediment mixing processes have a strong influence on early diagenetic reactions, solute release potentials and actual fluxes from the sediments. Also the sediment mixing via bottom trawl fishing can be regarded as an event-like disturbance. The newly developed approach of non-steady-state modeling of pore water sets (Bo Liu; IOW) can help to answer the question, how long it takes to reach a steady-state after a sediment disturbance event.
The concentration profiles in interstitial waters were used to calculate net transformation rates via the transport-reaction models REC and PROFILE. The calculations revealed net release of H4SiO4 and PO4 within the top 20 cm of the studied muds, while net DIC and NH+4 consumption and sulfate production was clearly evident within the top ∼ 5 cm. Intensive reoxidation of sulfide that was produced via sulfate reduction was also indicated by large deviations between the modeled net sulfate transformation rates and experimentally derived gross sulfate reduction rates. These surface near transformations were probably associated with microbial chemosynthesis.
The studied sands of the southern Baltic Sea were usually characterized by very low pore water gradients, probably due to their frequent irrigation. Accordingly, calculated transformation rates were one to two orders of magnitude lower in the studied sands compared to the muds of the southern Baltic Sea. However, during a situation with a stratified water column, substantial pore water reservoirs with the typical concentration trends were present in the sandy Darss Sill sediments. Integrated production rates of PO4, Mn2+ and H4SiO4 derived from these concentration profiles were in the same order of magnitude as in the muddy Arkona Basin.
Intensive pore water irrigation is also capable to transport fresh organic matter into the sediment as was occasionally indicated by strongly increased surface near TOC in the sands. Considerable gross sulfate reduction rates and total oxygen uptake rates were measured in the sandy Oder Bank sediments, where pore water concentration profiles rather suggested absence of diagenetic processes. The studied sands were, hence, not unreactive substrates but usually rather unable to preserve the mineralization products.
This reflects the often limited significance of pore water evaluations in irrigated sandy sites but also the high mineralization potentials of coastal sands. Early diagenetic processes and the impact of intense benthic-pelagic exchange in such shallow marine environments is still poorly understood, as they were rarely investigated in the past and are methodologically more difficult to investigate.
The Baltic Sea deeps Gotland Deep and Landsort Deep were mainly controlled by sulfate reduction and shallow anaerobic oxidation of methane. Calculated rates of net sulfate reduction and net sulfide production were equivalent, indicating a lack of sulfide re-oxidation reactions. Phosphate liberation rates were low in the surface sediments, but strong linear concentration gradients indicated liberation at depth.
The euxinic Black Sea sediments were purely controlled by sulfate reduction via anaerobic oxidation of methane at the sulfate-methane transition zone in sediment depths of up to several meters. Subsequent diffusive concentration gradients clearly dominated pore water profiles in the surface sediments.
Benthic solute reservoirs of the top 10 cm pore waters were generally higher in the muds than in the sands of the southern Baltic Sea. The smaller reservoirs in the sands were cause by intensive exchange between pore water and bottom water in these permeable sediments. The three studied muddy sites of the southern Baltic Sea showed great dissimilarities with respect to their pore water compositions. Large observed pools of dissolved Fe2+ and PO4 clearly point to reduction of reactive Fe and release of adsorbed P pools. Multi-dimensional scaling analysis showed that seasonal variability played only a minor role for the observed variability of the benthic solute reservoirs. Principal component analysis revealed that the studied sediments can be characterized by essentially two factors based on their pore water reservoirs of the top 10 cm: 1) their mineralization and accumulation efficiency and 2) their secondary reactions in the suboxic zone, reflecting fundamental differences in their sedimentation conditions and mixing processes. While the sands were similar to each other due to their overall low reservoirs, sands, silts and muds mainly differed in their mineralization and accumulation efficiency. Large variability was also observed within the studied muds regarding their predominating redox metabolites. Highest dissimilarities were evident between the neighboring sites Mecklenburg Bight (mostly suboxic) and Luebeck Bight (mostly sulfidic). Therefore, the biogeochemical state in the studied sediments were shown to be mainly controlled by their sediment type and the transport of reactive iron into the sediments. The supply of organic matter to the sea floor controlled the overall mineralization activity, while the sediment permeability determined the accumulation efficiency of the sediment. Mixing of surface sediments together with the complex relation of oxygen, sulfur, iron and phosphorus in the solid and aqueous phase is controlling benthic nutrient fixation/liberation reactions. Salinity variability showed no noticeable effects on early diagenetic processes. During four sampling occasions in the Arkona Basin, bottom water salinity showed strong variability which was also effecting pore water concentration profiles in more than 15 cm depth. However, concentration profiles of typical organic matter mineralization products remained remarkably stable. Also gross sulfate reduction rates seemed to be unaffected by the variable pore water sulfate concentrations.
Nutrient fluxes across the sediment-water interface were obtained by the interpretation of vertical pore water concentration profiles via different models (diffusive fluxes) and via incubation of intact sediment cores (total fluxes). Benthic diffusive fluxes represent potential release of solutes into the water column. They were often strongly associated with the benthic reservoirs, thus fluxes were highest in the muds, considerably lower in the organic-poorer silts, and generally close to zero in the sands. The dissimilarities between diffusive fluxes in the different sediments were mainly controlled by the sediment type. Highest variability was observed within the muds, controlled by their different diagenetic pathways due to different sediment mixing intensities.
In the muddy sediments, diffusive PO4 fluxes were much higher than mineralization of organic matter with the common element ratios of marine organic matter can provide, indicating active recycling of phosphorus within the muds due to recurring adsorption and re-release on reactive iron oxyhydroxide phases. Especially in the strongly mixed Mecklenburg Bight sediments, pore water dissolved PO4 was primarily controlled by the release of adsorbed P. Actual PO4 release into the bottom waters (determined via core incubation experiments) was only measured under extended bottom water oxygen deficiency conditions. The same applied to the redox-sensitive solutes Fe2+, Mn2+ and sulfide.
For the less redox-sensitive solutes, diffusion usually accounted only for a fraction of the total interfacial flux. The proportion of advective to diffusive transport was estimated with different methods. Bioturbation induced sediment mixing was quantified by comparing the diffusive H4SiO4 fluxes derived from pore water modeling with the total fluxes derived from the core incubations. The studied muds showed infauna induced advection proportions of about 35 – 100 %. Only when infauna was absent, diffusion became the dominant transport process across the sediment-water interface. In the studied sands, advection was the dominating transport process, since their generally low surface near reservoirs lead to diffusive fluxes close to zero. However, it remains unclear whether bioturbation or hydrodynamic irrigation are responsible for that. An attempt was made to estimate the effect of hydrodynamic irrigation for a range of reasonable bottom water velocities from the sediment bedform geometry after Neumann et al. (2017). However, resulting potential hydrodynamic irrigation was found to be rather low compared to reported values from the literature and may significantly underestimate actual irrigation of the sandy sediments.
In a new non steady-state multi-element diagenetic modeling approach (Bo Liu, IOW), vertical δ13C pore water profiles were used to estimate the significance of advective transport processes. Mixing processes at the sediment-water interface were expressed as multiple of pure diffusion (ε). By adjusting this mixing coefficient as boundary condition for best fits of predicted to measured pore water profiles, the degree of these mixing processes was estimated. In the Arkona Basin surface sediments, this approach revealed best fits assuming a mixing depth of 3.5 cm with a tenfold higher total mixing degree based on diffusional transport. The calculated mixing depths and intensities were similar to bioturbation depths and rates obtained via traditional methods (Morys, 2016). The novel modeling approach is a promising method to evaluate surface sediment mixing processes.
Increased mineralization activity during productive seasons lead to increased oxygen consumption and therefore frequent bottom water hypoxia. The effects of hypoxic bottom water conditions on the early diagenetic processes in the sediments were studied via prolonged core incubation experiments. Shifts to bottom water oxygen deficiency had various consequences for benthic reservoirs and fluxes. The oxygen consumption decreased during hypoxic incubation phases. Decreased bioturbation activity diminished advective transport so that total fluxes of redox-insensitive solutes (e.g. H4SiO4) were decreased. Reactive iron and manganese oxides act as barrier (“iron curtain”) in the suboxic zone, preventing redox-sensitive solutes from their release into the water column. After a shift to bottom water hypoxia, these reactive oxides are re-dissolved and liberated into the water column. Prolonged incubation experiments suggested that the Mn-oxide reservoirs were depleted first before the Fe-oxides with the adsorptively bound phosphate were liberated.
The release of nutrients (especially phosphorus), dissolved inorganic carbon, and redox- sensitive compounds (e.g. hydrogen sulfide) strongly varied in the different studied environments, covering coastal-near oxic, temporary hypoxic and euxinic conditions.
In environments, where advection through hydrodynamic irrigation or bioturbation do not occur, like in anoxic or euxinic systems, surface-near pore water gradients reflect total solute interfacial fluxes. They depend on the supply of organic matter to the sea floor, the mineralization rates in the sediments and the composition of the overlying bottom water. In the Black Sea, much of the organic matter mineralization was performed already in the water column and not in the sediments, leading to a decreasing export of organic matter to the sediment and increasing concentrations of mineralization products in the bottom water with increasing water depth. Accordingly, benthic fluxes across the sediment-water interface of the deep Black Sea sites were the lowest of the entire study, essentially reflecting the low mineralization rates of AOM in deeper layers. Highest fluxes in the Black Sea were observed at the continental slope at intermediate water depths, but were still lower than in the Baltic Sea deeps.
In contrast, highest DIC fluxes were detected in the oxygen depleted Baltic Sea deeps Gotland Deep and Landsort Deep. These basins are shallow enough that reactive organic matter reaches the sea floor, where it is mineralized via sulfate reduction close to the sediment surface. Strong concentration gradients and therefore high diffusive interfacial fluxes across the sediment-water interface were evident. As bioturbation was absent, these diffusive fluxes were representative for total interfacial fluxes unlike in sediments with additional advective flux components.
In more complex environments, like coastal oxic sediments, inhabited by macrofauna, overflowed by currents and affected by resuspension events, the sediment surface represents an interface between turbulent and calm conditions, high and low concentrations and/or different redox-states. Such gradients are the basis for intensive exchange processes. The surface sediments in the coastal sites of the southern Baltic Sea were characterized by active organic matter mineralization via sulfate reduction and mixing induced secondary reactions taking place in the suboxic zone. This included the removal of dissolved sulfide due to iron oxide reduction with simultaneous liberation of PO4 into the interstitial waters. High surface near P reservoirs existed due to internal P cycling within the sediments, which was in turn driven by continuous re-oxidation of the reduced iron by downwards transported oxygen. These reservoirs were only actually released into the water column during bottom water oxygen deficiency situations, when the iron re-oxidation was inhibited.
This also applies for sediments of the Gulf of Finland and the deeper Baltic Sea basins Bornholm Basin and Gdanks basin, where temporary hypoxic conditions are responsible for recurrent benthic phosphate release.
The widespread occurring phosphate adsorption on sedimentary solid iron phases is a much debated ecosystem service of marine sediments. As discussed in this work, the sedimentary P liberation rates and pools of readily bio-available dissolved phosphate can be substantial in Baltic Sea muddy sediments. Actual phosphate fluxes across the sediment-water interface, though, are relatively small because phosphate is scavenged by adsorption on iron oxyhydroxides that are usually an integral part of coastal marine sediments if overlain by oxic bottom waters. Although muddy sediments often show only an oxic layer of only few millimeters thickness, adsorption capacities of iron oxyhydroxides are large enough to substantially retain P from being liberated into the water column. Falling under reducing conditions, iron oxyhydroxides are re-dissolved, liberating high amounts of PO4 into the surrounding waters. While permanently oxic sediments will preserve adsorbed P, permanently anoxic sediments steadily release mineralized P into the water column. However, sedimentary environments of oscillating redox conditions are predestined for high, burst-like benthic P fluxes. Especially in a quasi isolated environment like the Baltic Sea, with high nutrient inputs but only few sinks, these internal recycling processes promote eutrophication in the long-term. Further expanding hypoxia and anoxia in the Baltic Sea with a subsequent loss of benthic fauna and altered nutrient dynamics in the surface sediments may be the consequence.
ABSTRACT
In the present study, we performed gastropod analyses on loess–palaeosol sequences from northeast Armenia (Southern Caucasia) covering at least three glacial–interglacial cycles. The elaborated ecostratigraphy shows significant patterns of species composition related to the succession of pedocomplexes and loess, respectively. Pedocomplexes included species that can be associated with high‐grass to forest‐steppe biomes, indicating increased humidity for these sections compared to the loess layers. In contrast, loess layers that relate to glacial periods are associated with gastropod species of semidesert environments with shrub‐ and shortgrass‐steppes, indicating semiarid to arid conditions. Furthermore, the loess deposits do not show any evidence for cold‐adapted gastropod species. Therefore, we suggest that average July temperatures in the study area were above 10 °C, even during periods of loess deposition. Consequently, we propose that the limiting factor for tree growth during glacial periods was aridity, rather than temperature. In addition, we observe environmental differences between the various glacial times, with our results indicating a trend towards steadily increasing aridity in Southern Caucasia across the Middle to Late Pleistocene.
Terrestrial surface waters and submarine ground water discharge (SGD) act as a source of dissolved substances for coastal systems. Solute fluxes of SGD depend on the ground water composition and the water-solid-microbe interactions close to the sediment-water interface. Thus, this study aims to characterize and evaluate the hydrogeochemical gradients developing in the fresh-salt water mixing zone of the Wismar Bay (WB), southern Baltic Sea, Germany. Sampling campaigns covering the WB, the fresh-salt water mixing zone at the beach of the WB shoreline, terrestrial surface and ground waters near the WB as well sediments pore water were carried out. In these different waters, the distribution of dissolved inorganic carbon, nutrients, major ions, trace elements, stable isotopes (H, O, C, S), and radium isotopes have been investigated. Enhanced concentrations of radium isotopes together with dissolved manganese, barium in the surface waters of the eastern WB indicated benthic-pelagic coupling via the exchange between pore water and the water column. Salinity, stable isotopes, and major ions in sediment pore water profiles identified the presence of fresh ground water below about 40 cmbsf in the central part of the bay. Geophysical acoustic techniques revealed the local impact of anthropogenic sediment excavation, which reduced the thickness of a sediment layer between the coastal aquifer and the bottom water, causing, therefore, a ground water upward flow close to the top sediments. The fresh impacted pore water stable isotope composition (δ18O, δ2H) plot close to the regional meteoric water line indicating a relatively modern ground water source. The calculated organic matter mineralization rates and the dissolved inorganic carbon sediment-water fluxes were much higher at the fresh impacted site when compared to other unimpacted sediments. Therefore, this study reveals that different fresh water sources contribute to the water balance of WB including a SGD source.
Subterranean estuaries the, subsurface mixing zones of terrestrial groundwater and seawater, substantially influence solute fluxes to the oceans. Solutes brought by groundwater from land and solutes brought from the sea can undergo biogeochemical reactions. These are often mediated by microbes and controlled by reactions with coastal sediments, and determine the composition of fluids discharging from STEs (i.e., submarine groundwater discharge), which may have consequences showing in coastal ecosystems. While at the local scale (meters), processes have been intensively studied, the impact of subterranean estuary processes on solute fluxes to the coastal ocean remains poorly constrained at the regional scale (kilometers). In the present communication, we review the processes that occur in STEs, focusing mainly on fluid flow and biogeochemical transformations of nitrogen, phosphorus, carbon, sulfur and trace metals. We highlight the spatio-temporal dynamics and measurable manifestations of those processes. The objective of this contribution is to provide a perspective on how tracer studies, geophysical methods, remote sensing and hydrogeological modeling could exploit such manifestations to estimate the regional-scale impact of processes in STEs on solute fluxes to the coastal ocean.
With an increasing trend towards neoliberal immigration policies, the migration regime provides flexibility with regard to the workforce and the labour market as a whole. And there has been more engagement between research on the labour regime for migrant workers in global production networks (GPN) (Coe and Hess, 2013, Baglioni et al., 2022, Raj-Reichert, 2013). As functional and geographical fragmentation of production poses challenges for collective labour power at the nodes of GPNs (Mosley, 2010), for migrant workers in particular, new needs for research on how the connection between flexibilisation and migration shapes the local labour market arise conceptually and empirically (Baglioni et al., 2022).
This dissertation aims at developing a conceptual framework of migrant labour regime (MLR) with a particular focus on the interplay of the role of the state, the firm and labour market intermediaries (LMI) in global production networks (GPN) and illustrates this by the example of Filipino migrant workers in the Taiwanese semiconductor industry. Furthermore, the study examines working conditions of
migrant workers to expand the conceptualization of social upgrading.
The primary data for this dissertation are collected through semi-structured interviews with key persons in the semiconductor industry and survey of 457 Filipino migrant workers in two clusters of the Taiwanese semiconductor industry: Kaohsiung and Hsinchu. On the one hand, the study demonstrates the different roles of actors and connections within the GPN. For example, firstly, it emphasises the importance of the state and firms in shaping the MLR. Secondly, the coordination between contract manufacturers and lead firms in the GPN leads to a transformation of the workplace, e.g., intensification and increased flexibility. Thirdly, LMIs play a role in facilitating and mediating migrant labour in the transnational labour market. The coupling between the local labour market and the GPN is essential to understand the dynamics resulting from commercial pressure and inter-firm relationships. One the other hand, the study uses social upgrading as an analytical lens to examine the working conditions and further improve the understanding of the migration process in the cross-border labor market.
Anthropogenic greenhouse gases such as carbon dioxide (C02) must be mitigated and reduced to preserve
a stable climate for future generations. One promising technology is carbon capture and storage (CCS) in
geologic formations, which is currently being deployed in numerous pilot projects across the United
States. One of these is the Illinois Basin–Decatur Project that has successfully stored 1 million metric tons
of C02 in the Mt. Simon storage complex. The Mt. Simon Sandstone reservoir has been largely unexplored
due to a previous lack of economic interest. Oil-bearing formations in the Illinois Basin are in younger
successions and formation waters in the Mt. Simon are highly saline but with low levels of critical elements
(i.e. lithium, magnesium). In the Illinois Basin, a limited number of drill holes penetrate the Mt. Simon
formation with an even smaller number of core samples in these deep strata. This has left the earliest
Paleozoic rocks in the Illinois Basin poorly understood. The stratigraphic test well at the IBDP revealed
the lowest most section of the Mt. Simon to be a thick highly porous and permeable sandstone. With a
near to complete lack of other wells penetrating this lower Mt. Simon unit, major questions arose such as
1) what is the origin of this deep porous sandstone; 2) what controls the distribution of this sandstone
and where can more of it be found; 3) what controls porosity at this depth when overlying sandstones
have largely poor reservoir properties; and 4) is it suitable for geologic carbon storage (i.e. are there high
quality seals that provide secure storage and prevent vertical migration)?
This research examines the origin and diagenesis of the Mt. Simon storage complex by first resolving the
age of the underlying Precambrian basement and investigating basement structures associated with
sediment accommodation (chapter ii). Basement geochronology and a comprehensive investigation of
the Mt. Simon provenance (chapter iii) suggests a largely local sediment supply depositing into a rift basin.
Detrital zircon geochronology of the lower Mt. Simon yields a dominant Mesoproterozoic proximal source
as confirmed in regional basement samples yielding Eastern Granite-Rhyolite, Southern Granite-Rhyolite,
and Mazatzal Province rocks. A small peak of Early Cambrian zircons (527 to 541 Ma) in the lower Mt.
Simon is indicative of rift volcanics as confirmed by the geochronology of a basalt sample recovered in a
deep stratigraphic test hole along the rift axis in west-central Indiana. Failed rifting pre-dated the
formation of the Illinois Basin with the earliest Paleozoic sediments deposited in a northward trending
Cambrian aulacogen. Locally sourced arkose in the lower Mt. Simon is considered to present an
anomalously high porosity that was preserved throughout its diagenetic history. Petrographic
characterization shows the lower Mt. Simon contains abundant diagenetic grain coatings of illite that
prevented pervasive nucleation of authigenic quartz found in the other overlying Mt. Simon units (chapter
iv). These clay coating are considered the most significant feature that controlled porosity preservation
in the Mt. Simon storage complex. Geochronology of these illite coatings reveals two major events of
illitization both of which correspond with structural deformation and igneous activity in and around the
basin in response to regional orogenic events (chapter v). The early illitization event (mostly
Carboniferous) was associated with smectite illitization and potassium feldspar dissolution, which caused
significant secondary porosity. The later illitization event (Triassic) is identified in non-reservoir units of
the Mt. Simon where pore occluding kaolinite was partially illitized. Lastly, high-resolution pore space
characterization of thick pervasive shale formations overlying the Mt. Simon indicates the Eau Claire shale, directly overlying the Mt. Simon, provides the best seal to the Mt. Simon reservoir completing the Mt. Simon storage complex (chapter vi).