Refine
Year of publication
- 2015 (3) (remove)
Document Type
- Doctoral Thesis (3)
Has Fulltext
- yes (3)
Is part of the Bibliography
- no (3)
Keywords
- Plasmaphysik (3) (remove)
Institute
In the last decade a new domain has developed in plasma physics: plasma medicine. Despite the successes that have already been achieved in this exciting new field, the interaction of plasmas with “biological materials” is not yet fully understood. Further investigations in particular with respect to the properties of the applied plasmas sources are therefore essential in order to decode this complex interaction process. Currently, a great variety of different discharge types are used in plasma medical investigation which are generally are operated in noble gases like helium and argon or with dry air. In the present work, the main focuses is on the diagnostics of reactive oxygen and nitrogen species (RONS) resulting from the plasma chemistry of an argon radio-frequency (RF) atmospheric pressure plasma jet (APPJ) and its interaction with the ambient atmosphere. To conduct this study, a commercially available plasma device, so-called kinpen is used due to its technical development maturity and its accessibility on the market. As a method of choice, diagnostic techniques are based on optical spectroscopy known to be a reliable tool to investigate plasmas. Consequently, three complementary optical laser diagnostics, namely quantum cascade laser absorption spectroscopy (QCLAS), laser induced fluorescence (LIF) and planar single shot LIF (PLIF), have been successfully applied to the plasma jet itself or its effluent. All of these diagnostics offer a high species selectivity and an excellent spatial and temporal resolution. They are used in this work for i) the characterization of the plasma chemical dynamics with respect to the generation of biological active RONS – in particular for the case of N2 and O2 admixtures. ii) the measurement of the NO density profile in the plasma effluent iii) the investigation of the flow characteristics of the neutral gas component (laminar vs. turbulent) and its influence on the plasma chemistry. Numerical analysis have been carried out in collaboration with PLASMANT (University of Antwerp) via kinetic simulations of the entire plasma chemistry. Expectingly, atomic oxygen (O) and nitric oxide (NO) turn out to be precursors of ozone (O3) and nitric dioxide (NO2). However, it was intriguing to unveil that atomic oxygen and nitrogen metastable (N2(A)) play together a key part --as intermediate species-- in the generation of more stable RONS, e.g. NO. The absolute density of NO space resolved was measured by LIF and absolutely calibrated molecular beam mass spectrometer. LIF was used to determine relative density of OH radical in the plasma plume. 2D-LIF was used to investigate the gas flow pattern with OH as a flow tracer. The results are discussed in details and show different operating mode of the jet, e.g. laminar or turbulent and that the plasma influences these regimes. The first detection and relative measurement by LIF of nitrogen metastable (N2(A)) produced by an argon APPJ is also shortly reported in this work. The outcome of this thesis will bring new insights in the field of argon APPJs chemistry and its interaction with the ambient atmosphere which can be valuable to support plasma modelling and to consider for the applications in plasma medicine.
The collisionless tearing mode is investigated by means of the delta-f PIC code EUTERPE solving the gyrokinetic equation. In this thesis the first simulations of electromagnetic non-ideal MHD modes in a slab geometry with EUTERPE are presented. Linear simulations are carried out in the cases of vanishing and finite temperature gradients. Both cases are benchmarked using a shooting method showing that EUTERPE simulates the linearly unstable tearing mode to a very high accuracy. In the case of finite diamagnetic effects and values of the linear stability parameter Delta of order unity analytic predictions of the linear dispersion relation are compared with simulation results. The comparison validates the analytic results in this parameter range. Nonlinear single-mode simulations are performed in the small- to medium-Delta range measuring the dependency of the saturated island half width on the equilibrium current width. The results are compared with an analytic prediction obtained with a kinetic electromagnetic model. In this thesis the first simulation results in the regime of fast nonlinear reconnection~(medium- to high-Delta range) are presented using the standard gyrokinetic equation. In this regime a nonlinear critical threshold has been found dividing the saturated mode from the super-exponential phase for medium-Delta values. This critical threshold has been proven to occur in two slab equilibria frequently used for reconnection scenarios. Either changing the width of the equilibrium current or the wave number of the most unstable mode makes the threshold apparent. Extensive parameter studies including the variation of the domain extensions as well as the equilibrium current width are dedicated to a comprehensive overview of the critical threshold in a wide range of parameters. Additionally, a second critical threshold for high-Delta equilibria has been observed. A detailed comparison between a compressible gyrofluid code and EUTERPE is carried out. The two models are compared with each other in the linear regime by measuring growth rates over wave numbers of the most unstable mode for two setups of parameters. Analytical scaling predictions of the dispersion relation relevant to the low-Delta regime are discussed. Employing nonlinear simulations of both codes the saturated island half width and oscillation frequency of the magnetic islands are compared in the small-Delta range. Both models agree very well in the limit of marginal instability and differ slightly with decreasing wave vector. Recently, the full polarisation response in the quasi-neutrality equation was implemented in EUTERPE using the Padé approximation of the full gyrokinetic polarisation term. Linear simulation results including finite ratios of ion to electron temperature are benchmarked with the dispersion relation obtained from a hybrid model. Finite temperature effects influence the saturated island width slightly with increasing ion to electron temperature ratio which has been verified by both models.
Im ersten Teil der Arbeit wird der erfolgreiche Aufbau einer Diagnostik zur quantitativen Bestimmung von Oberflächenladungsdichten beschrieben. Das Messprinzip bedient sich des elektro-optischen Pockelseffekts eines BSO-Kristalls, der in der Entladungszelle als Dielektrikum eingesetzt ist. Diese Methode arbeitet zeitlich und lateral aufgelöst, was die Untersuchung der Dynamik von Oberflächenladungen auf drei verschiedenen Zeitskalen ermöglicht. Die erste Zeitskala liegt in der Größenordnung von einigen 100 ns. Damit kann erstmals die Deposition von elektrischer Ladung auf einer dielektrischen Oberfläche während eines Entladungsdurchbruchs beobachtet werden. Die Deposition beginnt im Zentrum eines zuvor deponierten Ladungsspots. Die Polarität der neudeponierten Ladung ist der des ursprünglichen Ladungsspots entgegengesetzt. Die Folge ist, dass die absolute Ladungsdichte im Zentrum im Verlauf einiger hundert Nanosekunden kleiner wird als in den Randbereichen. Der Umladungsprozess wird so lange fortgesetzt, bis das elektrische Feld der neu deponierten Ladungen dem äußeren Feld so stark entgegenwirkt, dass die Spannung zur Aufrechterhaltung der Entladung unterschritten wird und die Entladung erlischt. Die zweite untersuchte Zeitskala liegt in der Größenordnung der Periodendauer der externen Spannung. Im Nulldurchgang der Spannung liegen zeitlich stationäre Ladungsdichteverteilungen auf dem Dielektrikum vor. Die Geometrie eines mittleren Ladungsspots wird in Abhängigkeit der anliegenden Spannungen und des Gasdrucks untersucht. Einerseits ist der Spotradius abhängig von den Ionisationsprozessen im Volumen, weil die Dichte der Raumladungen die Stärke des Elektronenfokus in das Innere der Entladung steuert. Andererseits wird die Spotbildung durch eine laterale Drift von Ladungsträgern kurz vor der Oberfläche aufgrund des elektrischen Feldes deponierter Ladungsträger beeinflusst. Die dritte untersuchte Zeitskala liegt in einer Größenordnung von Sekunden. Im Fall einer initial homogenen Oberflächenladungsverteilung nimmt die mittlere Ladungsdichte in einer Größenordnung von Sekunden monoton ab. Dieser Prozess stellt einen Ladungsabbau dar, dessen zeitliches Verhalten durch zwei überlagerte Exponentialfunktionen beschreiben ließ. Dadurch werden zwei Ladungsträgerpopulationen im BSO angenommen, die verschieden abgebaut werden. Im Fall einer initial inhomogenen Ladungsdichteverteilung wird ein Transport elektrischer Ladung auf der BSO-Oberfläche in einer Größenordnung von Sekunden beobachtet. Es wird weiterhin erstmals die durch einen Atmosphärendruck-Plasmajet deponierten Ladungen auf BSO zeitaufgelöst gemessen. Die zeitliche Entwicklung der Oberflächenladungen kann mit der Messung des elektrischen Stroms an einer der Ringelektroden des Jets korreliert werden. Dadurch wird geschlossen, dass der Ladungsaustauch nicht direkt durch einen Bullet verursacht wird. Er erzeugt stattdessen einen elektrisch leitfähigen Kanal zwischen der Düse des Jets zur BSO-Oberfläche. Infolgedessen kann Ladung, die sich auf der Innenseite der Jetkapillare befindet, auf den BSO-Kristall transportiert werden. Im zweiten Teil der Arbeit werden Kenngrößen entwickelt, die den Ordnungszustand einer aus Einzelobjekten zusammengesetzten Entladungsstruktur quantitativ beschreiben. Die Kenngrößen werten dabei die laterale Leuchtdichteverteilung der Entladungsemisssion, u.a. auf Basis der Tripel-Korrelationsfunktion. Dabei werden zwei separate Bifurkationsspannungen zwischen einer hexagonalen und einer ungeordneten Anordnung beobachtet: Bei der Verringerung der Spannung wird zunächst der Bifurkationspunkt der azimutalen Ordnung durchlaufen und anschließend der Bifurkationspunkt der radialen Ordnung. Die Systeme gehen jeweils in einen Zustand geringerer Ordnung über. Die Ursache des Ordnungsverlusts ist das zunehmende Fehlen von Entladungsspots, was im Mittel zu einer geringeren Wechselwirkung der Spots untereinander führt und das System an Freiheitsgraden gewinnt. Im dritten Teil dieser Arbeit wird erstmals ein Ansatz verfolgt, der die Steuerung lateral strukturierter Entladungen ermöglicht. Dafür wurde ein Aufbau konstruiert, bei dem ein gekühlter Halbleiter als Dielektrikum in der Entladungszelle dient. Dessen externe Beleuchtung führt bei einer anliegenden Spannung zu einer Änderung des Spannungsteilerverhältnisses der kapazitiven Elemente und schließlich zu einer lokalen Erhöhung der Spannung über dem Entladungsraum. Die Größe und Leuchtintensität der durch die Beleuchtung gezündeten Entladung ist stark abhängig von der beleuchteten Fläche, der Leistungsdichte der Beleuchtung und der anliegenden Spannung.