Refine
Document Type
- Doctoral Thesis (4)
Has Fulltext
- yes (4)
Is part of the Bibliography
- no (4)
Keywords
- Yeast (4) (remove)
Currently, plastic materials are an integral part of our lives, but their production mostly bases on fossil fuels or derivatives, which resources are decreasing. Extraction and processing of non-renewable resources have also negative impact on environment. One of the most promising and environmentally friendly approaches is use of microorganism. This PhD dissertation presents the non-conventional yeast Arxula adeninivorans as a host for production of bio-based and biodegradable poly(hydroxyalkanoates) plastics poly(hydroxybutyrate) and co-polymer poly(hydroxybutyrate-co-hydroxyvalerate). Additionally, the constructed yeast strain was able to secrete enantiomerically pure (R)-3-hydroxybutyric acid.
The production of PHAs requires three enzymes: β-ketothiolase, acetoacetyl-CoA reductase and PHA synthase. The strategy followed in this project was divided into two parts. While all three enzymes are responsible for intracellular production of PHA polymer, first two only lead to secretion of (R)-3-HB into culture media, which was used in a first stage of work to establish and optimize polymer production. Both, different bacterial strains and yeast A. adeninivorans were taken into account in screening of the genes encoding aforementioned enzymes. Bacterial genes were chemically synthesized using codon optimization pattern and endogenous genes were obtained using PCR and genomic DNA template from A. adeninivorans LS3 wild-type strain. Each gene was cloned into Xplor2 vector between TEF1 constitutive promoter and PHO5 terminator. Vector containing both thiolase and reductase genes was used for A. adeninivorans transformation.
The best combination of heterologous genes was overexpression of β-ketothiolase gene from Clostridium acetobutylicum and acetoacetyl-CoA reductase gene from Cupriavidus necator which led to secretion of 4.84 g L−1 (R)-3-HB, at a rate of 0.023 g L−1 h−1 over 214 h in shaking flask cultivation. Further optimization by fed-batch culturing with glucose as a carbon source did not improve (R)-3-HB secretion, but the rate of production was doubled to 0.043 g L−1 h−1 [3.78 g L−1 of (R)-3-HB at 89 h].
The product of acetoacetyl-CoA reductase is (R)-3-HB-CoA and further removing of CoA moiety is needed for acid secretion into culture media. A. adeninivorans is able to conduct this process without any additional modification but the conversion rate is unknown. Two thioesterases, cytosolic TesBp encoded by TesB gene from E. coli and mitochondrial ATes1p encoded by ATES1 gene from A. adeninivorans, were analysed to enhance secretion process. Additionally, a cytosolic version of ATES1 gene (ATES1cyt) was tested. All three genes were expressed in A. adeninivorans cells under TEF1 constitutive promoter together with thiolase and reductase genes. Despite detected enzymatic activity the yield of (R)-3-HB synthesis and secretion was not increased. Moreover, overexpressed thioesterases negatively influenced cell growth, indicating that they act on other metabolic components. The results provided two sets of information, first, the endogenous secretion system is sufficient for (R)-3-HB production; second, further screening of suitable genes needs to be performed.
Based on optimization of (R)-3-HB synthesis, thiolase gene (thl) from C. acetobutylicum and reductase gene (phaB) from C. necator were chosen to combine with PHA synthase gene (phaC) for creating the PHB-V producing strain. The PHA synthase expression module, containing TEF1 promoter and PHO5 terminator, was cloned into Xplor2 vector together with thiolase and reductase expression modules and used for A. adeninivorans transformation. The engineered strain accumulated up to 7.47% PHB of dcw. During the set of cells passaging A. adeninivorans lost the ability to accumulate polymer with maximal 23.1 % of primary accumulation level. Additionally, use of a vector including hygromycin B antibiotic resistance marker (instead of auxotrophic marker in Xplor2) did not improve polymer accumulation and stability.
To counteract the effect of loss of accumulation stability, phasin gene (phaP1), originated from C. necator, was introduce together with PHA pathway genes. First screening cultivations resulted in stabilizing of polymer production reaching 9.58 % PHB of dcw and only 12.0 % loss of production ability. Further experiments increased PHB content with 19.9% PHB of dcw (3.85 g L-1) after 180 h of cultivation using rich medium. Use of another thiolase gene, the second thiolase from C. necator (bktB), which theoretically should induce production of PHBV copolymer, led to accumulation only 11.4% PHB of dcw after 139 h and no PHV fraction was detected.
Variation of the ratio between flask volume and amount of media influences the level of aeration. Importantly, decrease of aeration level significantly increased polymer synthesis. Additionally, PHB-V copolymer accumulation has been induced by use of different carbon source co-substrates. Use of rich media supplemented with ethanol allow the strain with thl thiolase to accumulate up to 42.9 % PHB of dcw without PHV fraction and with bktB thiolase to 30.5 % PHB of dcw. Nevertheless, despite of lower total amount of polymer, supplementation with 1-propanol allow both strains to accumulate PHB-V copolymer with 7.30 %mol and 22.5 %mol of PHV for thl and bktB strains, respectively.
Optimization based on genetic engineering further enhanced polymer production yield led to exceeding of 50 % PHB-V of dcw. For doubling the gene dosage, PHA synthesizing strains of A. adeninivorans were again transformed with Xplor2 vector containing PHA pathway genes. Resulting strains exhibited twice the level of enzymatic activities of thiolase and reductase compared with strains transformed once with expression vector. In a shaking flask experiment the strain transformed twice with vector containing bktB thiolase reached after 240 h 52.1% PHB-V of dcw (10.8 g L-1) with 12.3 %mol of PHV fraction which is the highest level found in yeast. As another genetic approach, a fusion strain has been created. Two different strains have been established and merged using protoplast fusion technique. Doubling of genetic material resulted in similar level of copolymer produced by Arxula as in former experiments (50.2% of dcw, 10.7 g L-1).
Culture conditions were optimized in controllable cultivation using fed-batch mode. Although optimal oxygen and pH level and continuous carbon source and nitrogen feeding were maintained, final polymer level in % of dry mass was around three times lower than for shaking flask experiment. Nevertheless, efficient growth of Arxula in fed-batch mode led to increase of total copolymer level in g L-1 (16.5 g L-1 compare to 10.8 g L-1 for shaking flasks) showing the feasibility of using Arxula strain for up-scaling production of copolymer.
Acetyl-CoA is a main precursor in synthesis of PHB-V copolymer and change of its pool was investigated. ATP citrate lyase is a cytosolic enzyme converting citrate into oxaloacetate and acetyl-CoA, supporting the biosynthesis of fatty acids. Two genes encoding Acl subunits from Aspergillus nidulans (AnAcl1 and AnAcl2) were again cloned into Xplor2 vector and transformed into A. adeninivorans PHA producing strain. Despite of higher enzymatic activity of AnAclp, accumulation of polymer was around three times higher for control without expression of lyase genes. Expectedly, the strain expressing AnAcl1/2 genes accumulated larger amount of each stearic, palmitic and oleic acid in both standard and fatty acid inducing conditions (lower nitrogen level). Thus, overexpression of AnAcl1/2 genes in A. adeninevorans cells may improve biosynthesis of fatty acids but is ineffective for PHB polymer accumulation.
The aim of the project was use of starch-based media, manufactured as by-products, for polymer production. Genetically engineered Arxula strains were cultivated using these media instead of glucose-based media. Although yeast cells were both able to secrete (R)-3-HB and to accumulate PHB, the yield was lower than for previous media. Additionally, only trace of PHV was found at the end of cultivation time when 1-propanol was supplemented. Obtained results showed that use of cheaper media is a promising approach to decrease production costs but further optimization needs to be performed especially for extended scale of production.
Determination of produced copolymer has been done based on microscopic analysis and studies of physical and chemical properties. Results revealed that Arxula accumulated PHA polymer in cytosolic granules with a similar size range compared to the ones produced by bacteria. The physicochemical study showed that produced polymer exhibited slightly different properties in comparison to bacterial polymer with similar content of PHV, i.e. very-low molecular mass, higher melting and glass transition temperature.
All above results showed that A. adeninivorans is a promising host for PHB-V production. Expression of phasin greatly increased production and stability of polymer, which led to an accumulation level never found before in yeast. Further optimization in higher production scale using cheap starch-based media may establish Arxula strain as a valuable tool for industrial production of PHB-V copolymer.
Phospholipide wie Phosphatidylinositol und Phosphatidylcholin sind essenzielle Bestandteile aller biologischen Membranen und für deren Integrität und Funktion unerlässlich. Sind Inositol und Cholin (IC) im Medium vorhanden, ist die Hefe Saccharomyces cerevisiae in der Lage, diese aufzunehmen und zu verarbeiten. Unter Mangelbedingungen können diese Stoffe von der Zelle selbst synthetisiert werden. Daher ist es sinnvoll, die Phospholipid¬biosynthese-Gene differenziell zu exprimieren, was auf der Ebene der Transkriptions¬initiation geschieht. Bei IC-Mangel werden die Gene (z. B. das Inositol-3-Phosphat Synthase Gen INO1) durch Bindung des heterodimeren Aktivatorkomplexes Ino2/Ino4 an das Promotorelement ICRE („inositol/ choline responsive element“) aktiviert, um die Biosynthese zu gewährleisten. Sowohl Ino2 als auch Ino4 sind für die ICRE-Bindung nötig, während die transkriptionale Aktivierung nur durch Ino2 mit Hilfe zweier Transkriptionsaktivierungsdomänen TAD1 und TAD2 vermittelt wird. Ist dagegen ausreichend IC vorhanden, werden die Gene reprimiert, indem der Repressor Opi1 an den Aktivator Ino2 bindet, sodass es zu einer Konformationsänderung kommt und eine Dimerisierung mit Ino4 nicht mehr möglich ist.
Um eine erfolgreiche Transkriptionsinitiation zu gewährleisten, bilden neben der RNA-Polymerase II eine Reihe genereller Transkriptionsfaktoren (A, B, D, E, F und H) sowie der Mediatorkomplex im Promotorbereich der Zielgene den sog. Präinitiationskomplex (PIC). Die von diesen basalen Faktoren gewährleistete geringe Grundexpression kann von Aktivatorproteinen, die an positiv-regulatorische Elemente („upstream activation site“, UAS) binden, deutlich verstärkt werden. Hierzu nutzen Aktivatorproteine verschiedene Mechanismen, zu denen die Auflockerung der Chromatinstruktur durch Histonmodifikationskomplexe wie SAGA oder Chromatinremodellierungskomplexe wie SWI/SNF, die bessere Bindung der Transkriptionsfaktoren am Basalpromotorbereich oder die Beschleunigung des Übergangs vom geschlossenen zum offenen PIC gehören.
Im Verlauf dieser Arbeit konnten zahlreiche Interaktionen zwischen dem Aktivator Ino2 und Faktoren der Transkriptionsmaschinerie nachgewiesen werden, die vermutlich die Häufigkeit der Trans¬kriptions-initiation beeinflussen. Einige der Untereinheiten des Transkriptionsfaktors TFIID interagie¬ren mit Ino2. Ein Schwerpunkt dieser Arbeit lag auf der Charakterisierung der Interaktion der Ino2-TAD1 mit Taf1 und Taf12. Der Austausch der Aminosäuren Asparaginsäure-20 und Phenyl¬alanin-21 in Ino2 führte zu einem Interaktionsausfall mit beiden Tafs. In Taf1 konnten zwei basisch-hydro¬phobe Aminosäure-Bereiche (K206 Y207 und L208 L209 K210) innerhalb der minimalen Aktivator¬binde¬domäne 2 (ABD2) identifiziert werden, die kritisch für den Kontakt zum Aktivator sind. Es konnte ferner gezeigt werden, dass basische und hydrophobe Aminosäuren in Kombination für die Bindung an den Aktivator verantwortlich sind und dass der Austausch gegen Alanin (KY-AA) zu einem Abfall der Expression des INO1-Gens auf 44% führt. Darüber hinaus konnte der Bromo¬domänen¬faktor Bdf1 als Interaktionspartner von Ino2 identifiziert werden. Bdf1 vervollständigt Hefe-Taf1, während Säuger-Taf1 selbst Bromodomänen zur Erkennung von Histonacetylierungen beinhaltet. Innerhalb der Taf12-Minimaldomäne sind die Aminosäuren K150 L151 R175 und L176 wesentlich für die Bindung an Ino2. Eine Teildeletion von Taf12, die unter anderem den Verlust dieser Aminosäuren zur Folge hat, führt zu einer auf 76% reduzierten INO1-Expression.
Ein weiterer Transkriptions¬faktor, der von Ino2 kontaktiert wird, ist TFIIA mit seinen Untereinheiten Toa1 und Toa2. Die Proteine kontaktieren beide TADs des Aktivators, allerdings konnten innerhalb der minimalen Interaktionsdomänen der Toa-Proteine keine für diese Interaktion verantwortliche Aminosäuren identifiziert werden. Veränderungen der Toa1-Sequenz hatten keinen phänotypischen Einfluss auf die Phospholipidbiosynthese, allerdings führten einige Veränderungen (RKRK-Motiv im AS-Bereich 253-259) zu letalen Folgen für das Wachstum der Zellen, weil die Bildung des TFIIA-TBP-TATA-Komplexes beeinträchtigt ist. Wahrscheinlich hat die Interaktion zwischen Ino2 und TFIIA eine verstärkende Wirkung auf die Transkriptionsinitiation der Phospholipidbiosynthese-Gene, indem die Interaktion zwischen TFIIA und TFIID stabilisiert wird und TFIIA die interaktive Oberfläche am Promotor für Interaktionen mit anderen Proteinen vergrößert.
Die Verschiebung der Nucleosomen in Promotorbereichen durch Chromatinremodellierungs¬kompexe wie SWI/SNF ist ein weiterer Mechanismus der Transkriptionsaktivierung. In früheren Arbeiten wurde bereits die Interaktion zwischen Ino2, Aro80 bzw. Gal4 und der SWI/SNF ATPase-Untereinheit Swi2 beschrieben. Im Zuge dieser Arbeit konnte eine minimale Interaktionsdomäne im AS-Bereich 238-307 kartiert werden. Essenzielle Aminosäuren für die Bindung an Ino2 und andere Aktivatoren konnten nicht identifiziert werden.
Sug1 und Sug2 sind ATPasen der regulatorischen 19S-Untereinheit des 26S Proteasoms. Neben der Degradation fehlgefalteter polyubiquitinierter Proteine haben sie auch eine nicht-proteolytische Bedeutung für die Transkriptionsinitiation. Bekannt ist, dass proteasomale ATPasen an aktiven Promotoren zu finden sind und mit Aktivator¬proteinen (z. B. Gal4) interagieren können. Die vorlie¬gende Arbeit zeigt, dass auch Ino2 von Sug1 und Sug2 kontaktiert wird. Möglicherweise dienen sie am INO1-Promotor als Stabilisatoren und Vermittler zwischen Ino2 und der Transkriptionsmaschi¬nerie und erleichtern den Übergang des Präinitiationskomplexes in den Elongationskomplex.
Unter reprimierenden Bedingungen bindet Opi1 an Ino2 und rekrutiert die Corepressorkomplexe Sin3 und Cyc8/Tup1, die ihrerseits Histondeacetylasen in Promotornähe bringen und die Transkrip¬tion durch lokale Chromatinverfestigung reprimieren. Frühere Arbeiten hatten gezeigt, dass die Corepressoren auch mit Ino2 und weiteren Aktivatoren (Hac1 und Pho4) interagieren und dass sie in Abhängigkeit von Ino2, nicht aber von Opi1, am INO1-Promotor vorliegen. In dieser Arbeit wurde die Interaktion zwischen Ino2 und Sin3 bzw. Cyc8 charakterisiert. Sin3 und Cyc8 kontaktieren einen Bereich des Aktivators, der die TAD2 und die RID (Repressorinteraktionsdomäne) enthält. Es war bekannt, dass die Aminosäuren Phenylalanin-130, Leucin-131 und Asparaginsäure-132 essenziell für die Interaktion mit Opi1 sind. In dieser Arbeit wurde gezeigt, dass deren Austausch gegen Alanin auch einen Interaktionsverlust mit Cyc8 und Sin3 bewirkt. Darüber hinaus konnte gezeigt werden, dass diese FLD-AAA-Mutation zu einer praktisch konstitutiven Expression des INO1-Gens führt, allerdings auf niedrigerem Niveau als im Fall dereprimierter Zellen mit einem Wildtyp Ino2. In Hac1 und Pho4 konnten Aminosäuren mit vergleichbarer Bedeutung für die Corepressorbindung nicht identifiziert werden. Offenbar können die Corepressoren je nach physiologischer Situation in der Zelle positiv oder negativ auf die Transkriptionsinitiation wirken.
Alcohol dehydrogenases as biocatalysts for the production of enantiomerically pure chiral alcohols
(2016)
Summary Enantiomerically pure chiral alcohols are key compounds in the production of certain chemicals including pharmaceuticals. Chemical synthesis allows to obtain maximal yield of 50% for one enantiomer ( >50% yield is achievable with chiral catalysts used in chemical synthesis), whereas biosynthesis leads to nearly 100% yield. Hence, expensive and time consuming resolution of racemic mixture can be avoided. Alcohol dehydrogenases are the most popular enzymes used in the chiral alcohols synthesis due to high activity with appropriate aldehydes or ketones. ADHs require a cofactor which has to be regenerated after the conversion of aldehyde/ketone to the respective alcohol. Thereby, different regeneration methods were used in the practical work to compare and choose the better one. R. erythropolis and C. hydrogenoformans alcohol dehydrogenases were chosen based on the literature screening. Each gene was cloned into Xplor2 vector and pFPMT vector. Xplor2 vector was used for the transformation of A. adeninivorans and pFPMT vector was used for the transformation of H. polymorpha. Chemically synthesized alcohol dehydrogenase sequences from R. erythropolis (ReADH) and C. hydrogenoformans (ChADH) were cloned between TEF1 promoter and PHO5 terminator which are components of Xplor2 vector or between FMD promoter and MOX terminator which are genetic elements of pFPMT vector. Moreover, ChADH and ReADH sequences with His-tag encoding sequence at the 5’ or 3’ end were constructed and the most active form of the protein was selected for further studies. ReADH-6H was used for the synthesis of 1-(S)-phenylethanol and ethyl (R)-4-chloro-3-hydroxybutanoate whereas ChADH-6H was used for the production of ethyl (R)-mandelate. ReADH-6H synthesized in A. adeninivorans and H. polymorpha was fully biochemically characterized. The enzymes from the two yeast species showed some differences in their pH and temperature optima, thermostability and activity levels. A-ReADH (A. adeninivorans) and H-ReADH (H. polymorpha) were highly active with the same substrates which were: acetophenone, 4-hydroxy-3-butanone and ethyl 4-chloroacetoacetate for reduction reaction along with 1-phenylethanol and 1,6-hexanediol for oxidation reaction. Recombinant A-ReADH-6H and H-ReADH-6H were synthesized in A. adeninivorans and H. polymorpha, respectively. Both enzymes were used for the synthesis of 1-(S)-phenylethanol and ethyl (R)-4-chloro-3-hydroxybutanoate with the use of substrate-coupled cofactor regeneration system. The enantiopurity of the products was >99%. Moreover, A. adeninivorans whole cell catalyst was also used for the synthesis of both chiral alcohols. BmGDH (Bacillus megaterium glucose dehydrogenase) was co-expressed with ReADH-6H for NADH cofactor regeneration. Comparison between isolated enzymes and permeabilized whole cell catalysts indicate that cell biocatalysts are more suitable for the production of 1-(S)-phenylethanol with 92% of acetophenone being converted in 60 min. However, cells did not show any significant advantage over isolated enzymes in the synthesis of ethyl (R)-4-chloro-3-hydroxybutanoate although the velocity of the synthesis of ethyl (R)-4-chloro-3-hydroxybutanoate was slightly improved using whole-cell catalysts, giving an 80% substrate conversion in 120 min. Recombinant C. hydrogenoformans alcohol dehydrogenase was synthesized in A. adeninivorans and biochemically characterized. Enzyme showed high activity only with one substrate, ethyl benzoylformate. The A. adeninivorans and H. polymorpha cell catalysts synthesizing ChADH and BmGDH (Bacillus megaterium glucose dehydrogenase) were constructed and used in the synthesis of ethyl (R)-mandelate (reduction product of ethyl benzoylformate) with the enantiopurity of the reaction product being >98%. H. polymorpha catalysts were more effective in the synthesis than A. adeninivorans cells. The first were able to convert 93% of ethyl benzoylformate within 180 min and the latter were converting 94% of the substrate within 360 min. Re-use of non-immobilized cells and catalysts entrapped in Lentikat® was performed and the improvement of the stability of immobilized catalysts was reported. Space time yield of 3.07 mmol l-1 h-1 and 6.07 mmol l-1 h-1 was achieved with A. adeninivorans and H. polymorpha cell catalysts, respectively. Alcohol dehydrogenase 1 from A. adeninivorans was analyzed concerning the synthesis of enantiomerically pure chiral alcohols. The enzyme did not synthesize industrially attractive products. However, based on biochemical characterization enzyme plays a role in the synthesis of 1-butanol or ethanol and thereby it is of biotechnological interest.
Hantaviren gehören zu den „Emerging Viruses“ mit einer weltweiten Verbreitung. Sie sind Erreger von Zooanthroponosen und werden von Nagetieren auf den Menschen übertragen. Humane Hantavirusinfektionen können je nach Erreger schwerwiegende Erkrankungen mit einer Letalitätsrate von bis zu 50 % hervorrufen. In den Jahren 2004/2005, 2007 und auch in diesem Jahr wurde in einer Reihe europäischer Staaten, einschließlich Deutschland, ein deutlicher Anstieg der Zahl der humanen Hantavirusinfektionen beobachtet. In Deutschland waren hauptsächlich Baden-Württemberg, Bayern, Niedersachsen und Nordrhein-Westfalen betroffen. Zu den Risikogruppen zählen Personen, welche aufgrund ihres Berufes in engen Kontakt zu dem Reservoirwirt und dessen Ausscheidungs¬produkten kommen und somit auch gegenüber den Viren besonders exponiert sind. Die Hanta¬virus¬diagnostik basiert größtenteils auf serologischen Nachweismethoden wie Enzyme-linked immunosorbent assays (ELISA) und Western Blot-Tests. Um humane Hantavirusinfektionen in Deutschland mit hoher Sensitivität und Spezifität zu diagnostizieren, wurden in dieser Arbeit serologische Testverfahren für die in Europa vorkommenden Hantaviren Dobrava-Belgrad-Virus (DOBV), Puumalavirus (PUUV) und Tulavirus (TULV) etabliert und validiert. Weiterhin wurden Protokolle zur Durchführung seroepidemiologischer Studien und für den Einsatz der neuen Testsysteme in der Diagnostik entwickelt. Gemäß dieser Protokolle wurden die Tests bei seroepidemiologischen Untersuchungen eingesetzt und lieferten Auf¬schluss über die Hantavirusprävalenz in verschiedenen Bevölkerungsgruppen in unter¬schiedlichen Gebieten Deutschlands. Auf der Basis Hefe exprimierter Nukleokapsidproteine (N-Proteine) von PUUV, Stamm Vranica-Hällnäs (PUUV-Vra) und Stamm Niederbayern (PUUV-Bava), DOBV, Stamm Slovenia (DOBV-Slo), und TULV, Stamm Moravia wurden ELISA und Western Blot-Tests zum Nachweis von humanen IgM- und IgG-Antikörpern entwickelt. Die Validierung mit deutschen und internationalen Seren ergab für die neuen Tests eine Sensitivität zwischen 94 % und 100 % und eine Spezifität von 96-100 %. Bei der Validierung der Tests mit Seren aus Finnland erreichte die Sensitivität 89-100 % und die Spezifität 95-100 %. Der Anteil an Seren, bei denen keine eindeutige Einteilung in „reaktiv“ oder „nicht reaktiv“ erfolgen konnte, lag bei maximal 2,7 %. Die indirekten DOBV-Slo- und PUUV-Vra-IgG/IgM-ELISA und Western Blot-Tests wurden durch INSTAND e.V. im März, September 2009 und April, September 2010 zertifiziert. Die TULV spezifischen Tests konnten aus Mangel an Referenztests und damit fehlender Referenzseren nicht validiert werden. Für die epidemiologischen Studien wurde das indirekte ELISA-Format eingesetzt, da das capture ELISA-Format in seiner diagnostischen Sensitivität schlechter als das indirekte Format abgeschnitten hatte. Die jeweiligen Western Blot-Tests und Immunfluoreszenztests dienten als Bestätigungstest. Die seroepidemiologische Studie bei 484 humanen Serumproben aus einem PUUV-Endemiegebiet in Niedersachsen zeigte eine Hanta-virusprävalenz von 7 %. Dieser Wert entspricht etwa dem Vierfachen der durchschnitt¬lichen Prävalenz des gesamten Bundesgebietes (1-2 %). Die Untersuchung von 178 Personen aus einem PUUV-Ausbruchsgebiet in Bayern ergab eine Hantavirusseroprävalenz von etwa 11 %. Interessanterweise waren 40 % der positiv getesteten Seren aus¬schließlich mit dem TULV-Antigen reaktiv. Es wurden auch die Seren von 208 in Bayern statio¬nierten Soldaten untersucht. Obwohl diese zu einer der Risikogruppen gehören, lag die Hantavirusprävalenz lediglich bei 2 %. Dagegen ergab eine Studie bei Wald¬arbeitern aus Branden¬burg dass 9 % der 563 ge¬testeten Personen Hantavirus spezifische Antikörper besaßen. Von diesen waren 43 % aus¬schließlich in den TULV-Tests reaktiv und 33 % reagierten exklusiv mit dem DOBV-Slo-Antigen. Eine ¬epidemiologische Studie bei Primaten aus dem deutschen Primatenzentrum in Göttingen zeigte, dass 12 % von den 251 getesteten Tieren mit mindestens einem der verwen¬deten Antigene reagierten. Dies stellt den ersten Nachweis von natürlichen Hantavirusinfektionen bei Primaten dar. Die Ergebnisse der epidemiologischen Studien zeigen die Bedeutung der Verwendung „homologer“ Antigene für eine hochsensitive serologische Diagnostik. Aus diesem Grund sollte zukünftig das PUUV-Bava Antigen für den serologischen Nachweis von Hantavirusinfektionen in Deutschland eingesetzt werden. Die epidemiologische Bedeutung des TULV muss weiter erforscht werden. Daher sollten bei zukünftigen epidemiologischen Studien die jeweiligen Serumproben auch auf TULV reaktive Antikörper untersucht werden. Mit den hier entwickelten serologischen Testverfahren wird es zukünftig möglich sein, Hantavirusinfek¬tionen mit hoher Sensitivität und Spezifität zu diagnostizieren.