Refine
Document Type
- Doctoral Thesis (3)
- Article (1)
Language
- English (4) (remove)
Has Fulltext
- yes (4)
Is part of the Bibliography
- no (4)
Keywords
- plasma diagnostics (4) (remove)
Institute
Publisher
- IOP Publishing (1)
AbstractThe 2022 Roadmap is the next update in the series of Plasma Roadmaps published by Journal of Physics D with the intent to identify important outstanding challenges in the field of low-temperature plasma (LTP) physics and technology. The format of the Roadmap is the same as the previous Roadmaps representing the visions of 41 leading experts representing 21 countries and five continents in the various sub-fields of LTP science and technology. In recognition of the evolution in the field, several new topics have been introduced or given more prominence. These new topics and emphasis highlight increased interests in plasma-enabled additive manufacturing, soft materials, electrification of chemical conversions, plasma propulsion, extreme plasma regimes, plasmas in hypersonics, data-driven plasma science and technology and the contribution of LTP to combat COVID-19. In the last few decades, LTP science and technology has made a tremendously positive impact on our society. It is our hope that this roadmap will help continue this excellent track record over the next 5–10 years.
The absolute density of the metastable N2(A,v=0) molecule was extensively studied in nitrogen barrier discharges at 500 mbar. For the detection of the metastables laser-induced fluorescence spectroscopy (LIF) was used, at which for the calibration of the absoute metastables density a comparison with Rayleigh scattering was performed. To get the ratio of the LIF signal to the Rayleigh signal it is shown that the LIF signal is the convolution of the Rayleigh signal with an exponential decay. Besides, the different cross sections are calculated and the ratio of the detection sensitivities at the laser and fluorescence wavelength is determined. As a first step on the way to atmospheric pressure barrier discharges, the laser-induced fluorescence spectroscopy was implemented in low pressure capacitively coupled radio-frequency discharges. The determined metastables density in the capacitively coupled radio-frequency discharge is somewhat below 10^12 cm^(-3) at 40 Pa and somewhat below 10^13 cm^(-3) at 1000 Pa. The axial density profiles show a nearly symmetric shape due to the long lifetime of the metastable state. At a pressure of 500 mbar the two discharge modes of the barrier discharge, the filamentary and the diffuse mode, were analysed. The filamentary mode was mainly investigated in an asymmetric discharge configuration. Typical densities in the detection volume are in the range of 10^13 cm^(-3), resulting in maximal densities of up to 10^15 cm^(-3) in the microdischarge channel. Such large densities are in agreement with the fast decay by the pooling reaction after the maximum of the metastables density in the afterglow of the discharge pulse. The time dependent measurements in the afterglow of single microdischarges offer a delay of the metastables production with respect to the discharge current. This delay indicates that the metastables production takes place mostly by cascades from higher triplet states, which are in turn excited by electron impact. The axial density profiles show a maximum in metastables density in front of the anode in agreement with optical emission spectroscopy, but which cannot be clearly identified because of the asymmetric discharge configuration. The measurements for the diffuse discharge mode were performed in a symmetric discharge configuration. The metastables density is in the range of 10^13 cm^(-3). It increases during the current pulse of the discharge and decays afterwards. The maximum of the metastables density is delayed with respect to the maximum of the discharge current. The depletion of metastables in the early discharge afterglow is dominated by the pooling reaction, afterwards quenching by nitrogen atoms becomes important assuming a nitrogen atom density in the order of 10^14 cm^(-3). As for the filamentary mode, the losses by diffusion are negligible for the measurement positions. The measured axial density profiles show an accumulation of metastables in front of the anode, whereas the density in front of the cathode is below the detection limit. To calculate the metastables current density to the dielectrics after the discharge pulse a simulation is developed including the dominant volume processes for the depletion of metastables and the axial diffusion. Starting point for the simulation is the axial metastables density distribution at the end of the discharge pulse. The calculated metastables current density at the dielectrics is in the range of 10^14 cm^(-2)s^(-1). With the use of recently calculated secondary electron emission coefficients a comparison of the secondary electron emission by metastables with the discharge current is done. It is figured out that the secondary electron emission current is large enough to be important during the discharge ignition. To expand the simulation to the whole voltage cycle, the excitation of metastables is assumed to be proportional to the discharge current and electron density. Using this model, the measured time dependences of the metastables density are well reproduced for the investigated parameter variations. This is not the case for the axial profiles, where a metastables loss process is missed to explain the formation of a density plateau in front of the anode during the discharge pulse. The intended calculation of the metastables current density shows that the delay of the metastables production with respect to the discharge current might be responsible for the ignition of microdischarges at the beginning of the discharge pulse.
In this work, various aspects of fundamental physics and chemistry of molecular gas discharges are presented with emphasis on the interaction between species, activated by low-pressure plasmas, and surfaces. As already known, synergistic effects of multiple plasma-generated species are responsible for surface modification. However, due to the large number of internal parameters of a discharge and the complex plasma processes the identification of correlations between plasma characteristics and their effects on surfaces are complicated. Therefore, the aim of this thesis is to improve the understanding of several phenomena associated with plasma–surface interactions by measuring or calculating fundamental kinetic, transport or spectroscopic data needed to interpret measurements and hereby, to support some future applications of plasmas.
The biological decontamination and sterilization is a crucial processing step in producing and reprocessing of medical devices. Since polymer-based materials are increasingly used for the production of medical devices, the application of conventional sterilization processes are restricted to a certain extent. Conventional sterilization techniques on the basis of high temperatures, toxic gases, or ionizing radiation can be detrimental to the functionality and performance of polymeric materials. For this reason, alternative, gentle, and efficient decontamination processes are required. One possible approach is the use of non-thermal physical plasmas. Especially atmospheric pressure plasma is receiving great interest due to the absence of vacuum systems which is highly attractive for the practical applicability. Its mechanisms of action enable the efficient killing and inactivation of micro-organisms which are attributed to the interaction of plasma-generated reactive oxygen and nitrogen species (ROS, RNS) as well as plasma-emitted (V)UV radiation. Owing to the moderate gas temperatures (near or at room temperature) so-called cold plasmas are well-suitable for the treatment of heat-sensitive materials, such as polymers, without affecting their bulk properties. The present work focuses on the investigation of atmospheric pressure plasma processes for the biological decontamination of polymers. The objective is to help elucidate on the one hand the impact of varied plasma process parameters on the inactivation of micro-organisms and on the other hand the influence of plasma on the surface properties of the substrate. The investigations were performed by means of a high-frequency driven plasma jet (from the product line kINPen) operated with argon and argon-oxygen mixtures. Three main aspects were analyzed: 1. The effect of plasma on the viability of micro-organisms dependent on working gas, treatment time, and the sample distance (distance between the jet nozzle and the substrate). 2. The plasma-based removal of microbial biofilms. 3. The effects of the plasma treatment on the surface properties of selected polymers. Additionally to the capability of the applied plasma jet in killing microbes the efficacy of this plasma jet for the removal of complex biological systems (e.g. biofilms) is shown. To model cell constituents of bacteria different synthetic polymers were chosen to gain insight into the decomposition process responsible for biofilm degradation. By investigating the impact of atmospheric pressure plasma on physico-chemical surface properties of various synthetic aliphatic and aromatic polymers the interaction mechanisms between plasma and plasma-exposed material are discussed. These studies are accompanied by applying different optical plasma diagnostic techniques (optical emission spectroscopy and two-photon absorption laser induced fluorescence spectroscopy) to obtain information on the plasma gas phase which contributes to the elucidation of the reaction mechanisms occurring during plasma exposure. Moreover, it is presented to which extent the plasma treatment influences the surface properties of polymers during the plasma-based bio-decontamination process and further, the benefits of surface-functionalized polymers for biomedical application is discussed.