Refine
Document Type
- Doctoral Thesis (4)
Language
- English (4) (remove)
Has Fulltext
- yes (4)
Is part of the Bibliography
- no (4)
Keywords
- Atmosphärendruckplasma (4) (remove)
Institute
- Institut für Physik (4) (remove)
In the framework of the current work has been the plasma initiated and surface catalysed species conversion studied in low pressure and atmospheric plasmas. The aim of the work is to improve the understanding of the internal processes in order to increase the energy efficiency as well as the selectivity of the reaction products of future plasma devices. Beside many technical applications of plasmas, air purification shows great potential. Over the last decades, plasma based pollution control has proofed its ability to remove harmful contaminants or annoying odours from an air stream. However, the energy efficiency and the selectivity of the products are a remaining challenge.
Motivated by these issues, a multi stage packed-bed reactor has been used to remove admixed ethylene and toluene from an air stream. It has been found that the maximum toluene destruction has been 60%, whereas ethylene has been nearly completely removed. The specific energy β has been between 120 and 1600 JL-1. Fourier Transform Infrared spectroscopy, FTIR spectroscopy, has been used to identify and quantify the species H2O, CO2, CO, O3, HNO3, HCN, CH2O, CH2O2, N2O and NO2. However, none of these experiments led to the detection of NO.
The embedment of packing material into a plasma volume leads to increased surface effects. In order to study them, the inner side of a tube reactor, made of Pyrex, served as the surface under study and has been exposed to a rf plasma for 1h. The surface effects of the plasma treatment have been investigated indirectly by studying the oxidation of NO into NO2. After the plasma exposure, the reactor has been evacuated and filled with a gas mixture of 1% NO in N2 / Ar. Both species have been measured using quantum cascade laser absorption spectroscopy, QCLAS. It has been found that, using oxygen containing plasmas, the NO concentration decreased whereas the NO2 concentration increased. Therefore, oxygen containing plasmas are able to deposit oxygen on the surface. The filling with NO leads to the oxidation via the Eley-Rideal mechanism. A simplified model calculation supports these assumptions.
For a more comfortable application of the QCLAS, a compact multi channel spectrometer has been developed, TRIPLE Q. It combines the high time resolution with the possibility to measure the concentration of at least three infrared active species simultaneously. Due to the high time resolution, a huge number of spectra have to be analysed. In order to calculate absolute number densities, an algorithm has been developed which automatically treats typical phenomena like pulse jitter, rapid passage effect or variations of the intensity of the laser pulses.
The gas temperature is an important parameter in plasma physics. Using the TRIPLE Q system, the gas temperature has been determined for pulsed dc plasmas. For this case, NO has been used as a probe gas. From the spectra, the temperature has been calculated using the line ratio method. The relative intensity of the absorption structures of NO at 1900.5cm-1 and 1900.08cm-1 depend on the temperature. Therefore, the ratio has been used to calculate the gas temperature with a time resolution in the μs range.
Vibrationally excited nitrogen can be an energy reservoir that plays an important role in plasma chemistry. In N2 / N2O plasmas, vibrationally excited N2 can undergo relaxation via a resonant vibration vibration coupling between vibrationally excited N2 and N2O. Due to such an efficient energy transfer, the method allows one to study the relaxation of vibrationally excited N2. Using this method, molecules, which are not infrared active, can be monitored. This approach has extended the field of scientific and commercial applications of the QCLAS.
Because of the vital role of the liquid as interface in plasma medicine, this work is focused on the elucidation of the interaction of plasmas with biologically relevant liquids. The results of this thesis are an important step in the direction of the applications to real biological liquids such as blood and wound secretion ex vivo as well as in vivo. In this thesis the following questions are investigated and answered with the special focus on the free radicals as highly reactive and, therefore, hard to detect relevant group of chemical species: What is the impact of the atmospheric-pressure argon plasma jet on biologically relevant solutions? Which species are generated due to the plasma treatment of liquids? What is an appropriate detection procedure for the qualification and quantification of the short-lived species? Does the surrounding conditions influence the formation of liquid-phase reactive species and can this influence be used to tailor a desired liquid composition? What is the influence of the plasma surroundings? What is the influence of feed gas manipulation regarding the reactive species generation? Can these impacts be used for a selected reactive species composition generation? Does the treated liquid medium affect the plasma-generated reactive species output and in what way? Which are the underlying mechanisms and origins of the plasma-caused chemical changes in the solutions? Do reactive species exist, which origin is located in the gaseous phase? What is the impact of the plasma jet radiation?
In this work the mechanisms leading to the generation of the various reactive oxygen and nitrogen species (RONS) in a cold atmospheric plasma (CAP) jet and means to control their composition were studied. The investigated CAP jet kinpen is typically operated with Ar feed gas (pure or with molecular admixtures), driven at a frequency of approximately 1 MHz and features fast ionization waves or guided streamers, traveling at velocities of several km/s. The complex reaction networks were investigated by numerical and experimental techniques. Detailed experimental, analytical and computational investigations on the mass and heat transport in the plasma plume were performed: A novel analytical approach to diffusion in jet flows, the non-dispersive path mapping approximation (NDPM) was developed. The method for the first time allows for an estimation of the ambient species density in the near-field of jets that feature a non-homogeneous flow-field. The NDPM approximation was employed for the evaluation of laser induced fluorescence measurements on OH. Through combining measurements and NDPM approximation, this approach yielded an estimation for the ambient species density at the position of the guided streamers, not only in the laminar, but also in the (standard) turbulent operating regime. Accurate measurements of the temporally averaged ambient species density and temperature in the plasma plume were obtained by quantitative Schlieren measurements. The method yields temperature values with sub-Kelvin accuracy and, through combination with computational fluid dynamics (CFD) simulations, allowed for an estimation of the calorimetric power of the jet. In order to obtain a defined environment for the jet to operate in, a shielding gas device was designed in this work, which creates a gas curtain of defined composition around the plasma plume. The plasma dynamics on the ns timescale was investigated by phase resolved optical measurements. The effect of different shielding compositions ranging from pure N2 to pure O2 on guided streamer propagation was investigated. An electrostatic focusing mechanisms was discovered, which promotes the propagation of guided streamers along the channels formed by a noble gas in the plume of plasma jets operating in electronegative gases (such as air or O2). Two zero-dimensional (volume averaged) models were developed: First, the local processes in the guided streamer were modeled using an electron impact reaction kinetic model, which is closely correlated to densities of metastable argon (Ar*) obtained by laser atom absorption measurements. This first model shows that Ar* is the species which dominantly drives the plasma chemistry in the plasma plume. This is exploited in the second plug-flow reaction kinetics model, which is employed to investigate the formation of long-living RONS and uses an Ar* source term as sole energy input. The model uses the previous experimental data on mass and heat transport and temporal dynamics as input and is in turn verified by quantitative FTIR absorption measurements on O3, NO2, N2O, HNO3 and N2O5 in the far-field of the jet, where large absorption lengths can be achieved using a multi pass cell. For the evaluation of the zero-dimensional model, the time-of-flight of RONS from their generation to reaching the multi pass cell was determined using CFD simulations. The insight gained through this combined experimental-modeling approach on the reaction networks revealed relevant control parameters and enabled adjusting the plasma chemistry towards a desired RONS output. Through choosing appropriate feed-gas admixtures and shielding gas compositions, it is possible to generate an NOx-dominated plasma chemistry, although the jet usually produces a strongly O/O3-dominated chemistry. Understanding and controlling the plasma chemistry of cold atmospheric plasma sources for medical applications is not only essential for research, but is also the key for designing future plasma sources for specific medical applications that yield an optimum efficacy and avoid potential side effects of plasma treatment.
In the last decade a new domain has developed in plasma physics: plasma medicine. Despite the successes that have already been achieved in this exciting new field, the interaction of plasmas with “biological materials” is not yet fully understood. Further investigations in particular with respect to the properties of the applied plasmas sources are therefore essential in order to decode this complex interaction process. Currently, a great variety of different discharge types are used in plasma medical investigation which are generally are operated in noble gases like helium and argon or with dry air. In the present work, the main focuses is on the diagnostics of reactive oxygen and nitrogen species (RONS) resulting from the plasma chemistry of an argon radio-frequency (RF) atmospheric pressure plasma jet (APPJ) and its interaction with the ambient atmosphere. To conduct this study, a commercially available plasma device, so-called kinpen is used due to its technical development maturity and its accessibility on the market. As a method of choice, diagnostic techniques are based on optical spectroscopy known to be a reliable tool to investigate plasmas. Consequently, three complementary optical laser diagnostics, namely quantum cascade laser absorption spectroscopy (QCLAS), laser induced fluorescence (LIF) and planar single shot LIF (PLIF), have been successfully applied to the plasma jet itself or its effluent. All of these diagnostics offer a high species selectivity and an excellent spatial and temporal resolution. They are used in this work for i) the characterization of the plasma chemical dynamics with respect to the generation of biological active RONS – in particular for the case of N2 and O2 admixtures. ii) the measurement of the NO density profile in the plasma effluent iii) the investigation of the flow characteristics of the neutral gas component (laminar vs. turbulent) and its influence on the plasma chemistry. Numerical analysis have been carried out in collaboration with PLASMANT (University of Antwerp) via kinetic simulations of the entire plasma chemistry. Expectingly, atomic oxygen (O) and nitric oxide (NO) turn out to be precursors of ozone (O3) and nitric dioxide (NO2). However, it was intriguing to unveil that atomic oxygen and nitrogen metastable (N2(A)) play together a key part --as intermediate species-- in the generation of more stable RONS, e.g. NO. The absolute density of NO space resolved was measured by LIF and absolutely calibrated molecular beam mass spectrometer. LIF was used to determine relative density of OH radical in the plasma plume. 2D-LIF was used to investigate the gas flow pattern with OH as a flow tracer. The results are discussed in details and show different operating mode of the jet, e.g. laminar or turbulent and that the plasma influences these regimes. The first detection and relative measurement by LIF of nitrogen metastable (N2(A)) produced by an argon APPJ is also shortly reported in this work. The outcome of this thesis will bring new insights in the field of argon APPJs chemistry and its interaction with the ambient atmosphere which can be valuable to support plasma modelling and to consider for the applications in plasma medicine.