Refine
Year of publication
- 2015 (14) (remove)
Document Type
- Doctoral Thesis (9)
- Article (4)
- Conference Proceeding (1)
Language
- English (14) (remove)
Has Fulltext
- yes (14)
Is part of the Bibliography
- no (14)
Keywords
- - (5)
- Laserspektroskopie (2)
- Plasmaphysik (2)
- Absorptionsspektroskopie (1)
- Anode (1)
- Atmospheric pressure plasma (1)
- Atmosphärendruckentladung (1)
- Atmosphärendruckplasma (1)
- Barium (1)
- Brennfleck (1)
Institute
- Institut für Physik (14) (remove)
Publisher
- IOP Publishing (5)
The main issue of this thesis was the investigation of dusty plasmas in magnetic fields. We made use of spherical paramagnetic as well as non-magnetic plastic particles in the micrometer range, so-called dust particles. The particles were then trapped in the sheath region of the driven lower electrode of an rf discharge. The plasma chamber was surrounded by coils to apply a horizontal magnetic field with field strengths of up to B=50mT at the particles’ position. In this configuration the sheath electric field and the external magnetic field were perpendicular to each other. Only the electrons could be magnetized but this leads to several forces acting on the dust particles. In some aspects the dust clusters with the magnetic particles show a behavior that is in complete contrast to those consisting of the standard non-magnetic plastic particles. Both types of particles have in common that the dust clusters were found to move either towards the positive or negative ExB-direction as a reaction to the magnetic field. Whether the positive or negative direction was preferred depended on the experimental conditions. The forces that lead to this transport are plasma-based forces induced by the magnetic field. These investigations were performed on two-dimensional horizontal particle systems. Vertically aligned dust particles due to the ion focus interaction have also been studied to determine the influence of horizontal magnetic fields on the stability of such dust pairs. Under certain conditions the vertical alignment can be broken up by the magnetic field. Some additional experiments on the interaction of non-magnetic dust particles in a plasma with UV irradiation were performed, but a significant decrease of dust charge due to a photoelectric effect was not detected. In summary, even relatively weak horizontal magnetic fields have a strong influence on dust particle systems.
In the last decade a new domain has developed in plasma physics: plasma medicine. Despite the successes that have already been achieved in this exciting new field, the interaction of plasmas with “biological materials” is not yet fully understood. Further investigations in particular with respect to the properties of the applied plasmas sources are therefore essential in order to decode this complex interaction process. Currently, a great variety of different discharge types are used in plasma medical investigation which are generally are operated in noble gases like helium and argon or with dry air. In the present work, the main focuses is on the diagnostics of reactive oxygen and nitrogen species (RONS) resulting from the plasma chemistry of an argon radio-frequency (RF) atmospheric pressure plasma jet (APPJ) and its interaction with the ambient atmosphere. To conduct this study, a commercially available plasma device, so-called kinpen is used due to its technical development maturity and its accessibility on the market. As a method of choice, diagnostic techniques are based on optical spectroscopy known to be a reliable tool to investigate plasmas. Consequently, three complementary optical laser diagnostics, namely quantum cascade laser absorption spectroscopy (QCLAS), laser induced fluorescence (LIF) and planar single shot LIF (PLIF), have been successfully applied to the plasma jet itself or its effluent. All of these diagnostics offer a high species selectivity and an excellent spatial and temporal resolution. They are used in this work for i) the characterization of the plasma chemical dynamics with respect to the generation of biological active RONS – in particular for the case of N2 and O2 admixtures. ii) the measurement of the NO density profile in the plasma effluent iii) the investigation of the flow characteristics of the neutral gas component (laminar vs. turbulent) and its influence on the plasma chemistry. Numerical analysis have been carried out in collaboration with PLASMANT (University of Antwerp) via kinetic simulations of the entire plasma chemistry. Expectingly, atomic oxygen (O) and nitric oxide (NO) turn out to be precursors of ozone (O3) and nitric dioxide (NO2). However, it was intriguing to unveil that atomic oxygen and nitrogen metastable (N2(A)) play together a key part --as intermediate species-- in the generation of more stable RONS, e.g. NO. The absolute density of NO space resolved was measured by LIF and absolutely calibrated molecular beam mass spectrometer. LIF was used to determine relative density of OH radical in the plasma plume. 2D-LIF was used to investigate the gas flow pattern with OH as a flow tracer. The results are discussed in details and show different operating mode of the jet, e.g. laminar or turbulent and that the plasma influences these regimes. The first detection and relative measurement by LIF of nitrogen metastable (N2(A)) produced by an argon APPJ is also shortly reported in this work. The outcome of this thesis will bring new insights in the field of argon APPJs chemistry and its interaction with the ambient atmosphere which can be valuable to support plasma modelling and to consider for the applications in plasma medicine.
With the growing importance of advanced lighting technologies, customers expect additional functionality and higher comfort from fluorescent lamps. However, the ability to regulate light intensity (dimmed operation), in particular, exerts enormous stress on fluorescent lamps’ electrodes, leading to increased electrode erosion and significantly reduced lifetimes. During the operation of a fluorescent lamp, free barium (the main compound of the electrode emitter) is produced at the electrode responsible for lowering the work function in order to enable energy-efficient and durable electrodes with lifetimes of up to 20,000 hours. Despite their relatively long lifetimes, electrodes remain the lifetime-limiting factor of a fluorescent lamp. Therefore, for practical applications (e.g., maintaining quality control, adjusting operational parameters, and evaluating new electrode designs), electrode erosion is of special interest. The actual erosion-measurement methods determine a time-averaged erosion level over several hundred operation hours. Thus, a quasi-instantaneous measuring method (short measurement) is still necessary to determine erosion during operation. Such a method would allow us to compare erosion under different discharge conditions (currents, frequencies, or heating currents) from the same electrode in the same lamp. This work focuses on the determination of absolute electrode erosion during the stationary operation of commonly used fluorescent lamps. Commercial T8 lamps (fluorescent lamps with a diameter of 8/8 inch) are investigated at the operating mode of commonly used electronic ballasts with frequencies of several kHz. Operations under standard and dimmed conditions with an additional heating current to reduce electrode erosion are investigated. Electrode erosion is characterized by the erosion of barium, the main compound of the electrode. Therefore, laser-induced fluorescence (LIF), which is the most sensitive method for this application, is applied to determine the absolute densities of the eroded barium in the electrode region. These densities are affected by the plasma in the electrode region and do not directly represent the absolute barium erosion. To overcome this limitation, a new method based on a special measurement technique in combination with a barium-diffusion-model is developed to determine the absolute barium erosion based on the measured densities. It has been found that the barium densities in the electrode region are lower than the equilibrium pressures produced by the reduction of the barium oxide. This could be caused either by a reduced reaction rate, the reduced diffusion of the reactant (primarily barium oxide) or by reduced barium transport through the porous emitter. However, these results suggest that barium erosion depends on temperature and emitter structure, which vary over an electrode’s lifetime. For currents significantly higher than the nominal lamp current, a drastic increase in emitter evaporation is found. Such, an increase in the lamp current from 300 mA to 500 mA leads to an increase in emitter evaporation by a factor of five. Using the lamp for a long period of time under these conditions therefore reduces the lifetime by a factor of five. Notably, at this dramatically increased erosion level, the hot spot temperature only increases from 1120 K to 1170 K. Investigation of various frequencies from 50 Hz to 5 kHz revealed no significant dependence of emitter evaporation on frequency.
The aim of this thesis is to concentrate on the investigation of these ROS&RNS composition distribution and their production pathways in the gas phase produced by a plasma jet. By understanding the physical mechanisms behind the generation of the ROS&RNS a precise tuning and design of the composition distribution in the gas phase can be achieved. One crucial physical parameter is the dissipated power inside the plasma. Only if this parameter is known a meaningful comparison of different feed gas settings is possible. Therefore, a concept for measuring the dissipated power inside the plasma for the modified micro-scaled atmospheric pressure plasma jet( µAPPJ) is designed. Additionally, due to achievements within this thesis it is now possible to ignite a homogeneous discharge in argon and helium within the geometry of the µAPPJ. The used feed gas is a determining factor concerning the electron energy distribution function and consequently influencing the production mechanism of the ROS&RNS. First of all, the electrical characterisation of the modified µAPPJ was performed including the alpha-to-gamma transition. It is shown that the alpha-to-gamma transition power is increasing with increasing frequency. For the first time it is now feasible to investigate the influence of the dissipated power on the neutral gas temperature, the metastable atom densities and the ROS&RNS production for the modified µAPPJ with argon and helium as feed gas. Due to the possibility of changing the feed gas and controlling the dissipated power a fundamental insight into the production mechanism of the ROS&RNS generated by the plasma jet is achieved. With rising dissipated power the temperature and the metastable densities as well as the ozone and nitrogen dioxide concentrations are increasing. By adding molecular oxygen and nitrogen to the feed gas of a plasma jet the ROS&RNS composition can be tuned. However, also the dissipated power is changed by the small amount of admixtures. Due to the developed dissipated power measurements within this thesis it was possible to disentangle the influence of the admixture on the power and on the ROS&RNS production. If the dissipated power is fixed for the µAPPJ with argon and helium feed gas, respectively, the highest amount of ozone was measured with oxygen admixture in an argon discharge, the highest amount of dinitrogen pentoxide with nitrogen admixture in an argon discharge and the highest amount of nitrogen dioxide with nitrogen admixture in a helium discharge. Beyond the influence of the dissipated power and the molecular admixture on the ROS&RNS production the feed gas temperature is a crucial parameter for the corresponding chemical reactions. By changing this parameter the distribution of ozone and nitrogen dioxide can be tuned precisely in such a way that with increasing temperature the ozone density goes down and the nitrogen dioxide density rises. Another determinant for the ROS&RNS composition produced by an atmospheric pressure plasma jet is the influence of ambient air. If the ambient air is changing from pure nitrogen to pure oxygen atmosphere the ozone density produced by the plasma jet is increasing. For the same conditions the nitrogen dioxide has a maximum at an oxygen-to-nitrogen ratio of 1:1. To avoid the influence of the ambient air on the reactive species production the afterglow of the µAPPJ was prolonged with a glass tube. By increasing the amount of molecular admixtures to the feed gas with each in equal quantities a totally different ROS&RNS composition can be obtained compared without the glass tube. It figures out that for small molecular admixtures the reactive species composition is nitrogen dominated and for higher admixtures it is oxygen dominated. Consequently, by shielding the ambient air from the active effluent and by admixing molecular oxygen and nitrogen the ROS&RNS composition can be designed.
The current work is focused on the study of two surface modification plasma processes, (i) the active screen plasma nitriding (ASPN) and nitrocarburizing (ASPNC) for the hardening of ferrous surfaces and (ii) the microwave plasma assisted chemical vapor deposition (MW-PACVD) for the synthesis of single crystal and doped diamond. Conventional and active screen plasma nitriding processes have been investigated in a cylindrical, industrial scale ASPN reactor with a volume of about 1 m3, using low-pressure pulsed dc H2-N2 plasmas with admixtures of CH4 or CO2. The experiments were carried out (i) with the plasma at an internal model probe, (ii) with the plasma at the active screen (floated model probe) and (iii) with the plasma at the active screen and an additional plasma at the biased model probe. For deeper insights in ASPN and ASPNC processes, a laboratory scale plasma nitriding monitoring reactor, PLANIMOR, has been constructed. The main feature of this reactor is the linear configuration of the electrode setup combined with a tubular glass vessel, overcoming the experimental disadvantages of cylindrical laboratory scale ASPN reactors. With the help of infrared laser absorption spectroscopy (IRLAS) the rotational temperature of the stable molecules in the gas phase and the concentrations of the precursor, CH4, and the reaction products (NH3, HCN, C2H2, C2H4, CO, CH3) could be determined in both reactors, depending on the plasma power, the gas mixture, the plasma at the model probe and the admixture of CH4. Furthermore, the admixture of CO2 as the carbon containing precursor has been studied in the ASPN reactor leading to an additional reaction product H2O. The concentration of the molecular species has been found being in a range of 1012 to 1016 molecules cm-3. Also optical emission spectroscopy (OES) has been applied during the studies for analyzing the emission of the plasmas in the nitriding and nitrocarburizing processes. A similar behavior of the plasma chemistry in PLANIMOR comparing to that in the ASPN reactor has been found. Beside the plasma chemical investigations, both reactors have been used for the treatment of C15 steel samples. These samples have been analyzed with the help of GDOES resulting in the elements profile of the treated surfaces. It has been found that samples treated in PLANIMOR reach comparable nitriding results as samples treated in the ASPN reactor. Another focus of interest during the investigations about plasma nitrocarburizing has been the application of a carbon containing screen electrode as carbon source. For this purpose the carbon containing precursor and the steel screen have been substituted by a meshed carbon electrode, acting as the active screen. This change of the setup leads to a decrease of the NH3 production by a factor of 2.5 and an increase of the concentrations of HCN by a factor of 30 and of C2H2 by a factor of 70. The investigations of MW-PACVD processes used for diamond layer deposition have been carried out in a jacketed stainless steel reactor (JR), dedicated to the deposition of single crystalline diamond under high pressure and plasma power conditions. Using H2-plasmas with admixtures of CH4 and B2H6, the experiments were carried out in order to analyze the dependence of the plasma chemistry on several parameters, such as plasma power, pressure and gas mixture, in a wide pressure (p = 25…270 mbar) and power range (P = 0.6…4 kW). Using IRLAS the concentrations of six molecular species (B2H6, CH4, C2H2, C2H4, C2H6, CH3) have been monitored. With the help of OES the concentration of atomic boron could be determined. The concentrations of the detected molecular and atomic species were found to be in a range of 1010 to 1017 cm-3. With the help of the line-ratio-method the rotational temperature of the stable molecules has been determined. The temperature increased with pressure and power from 340 to 425 K. Using the Doppler broadening of the absorption line of CH3 at ν = 612,413 cm-1, the gas temperature has found to be Tg = (2000 ± 200) K under lower pressure and power conditions. For the H2-CH4 gas mixture, the experimental obtained molecular densities have been compared to those of a 1D-radial thermochemical model. The calculated radial densities have been integrated axially. For the same range the chemical processes in JR have been compared with those in a bell-jar (BJ) reactor. The hydrocarbon chemistry in JR has found to be similar to that in a BJ reactor.
The collisionless tearing mode is investigated by means of the delta-f PIC code EUTERPE solving the gyrokinetic equation. In this thesis the first simulations of electromagnetic non-ideal MHD modes in a slab geometry with EUTERPE are presented. Linear simulations are carried out in the cases of vanishing and finite temperature gradients. Both cases are benchmarked using a shooting method showing that EUTERPE simulates the linearly unstable tearing mode to a very high accuracy. In the case of finite diamagnetic effects and values of the linear stability parameter Delta of order unity analytic predictions of the linear dispersion relation are compared with simulation results. The comparison validates the analytic results in this parameter range. Nonlinear single-mode simulations are performed in the small- to medium-Delta range measuring the dependency of the saturated island half width on the equilibrium current width. The results are compared with an analytic prediction obtained with a kinetic electromagnetic model. In this thesis the first simulation results in the regime of fast nonlinear reconnection~(medium- to high-Delta range) are presented using the standard gyrokinetic equation. In this regime a nonlinear critical threshold has been found dividing the saturated mode from the super-exponential phase for medium-Delta values. This critical threshold has been proven to occur in two slab equilibria frequently used for reconnection scenarios. Either changing the width of the equilibrium current or the wave number of the most unstable mode makes the threshold apparent. Extensive parameter studies including the variation of the domain extensions as well as the equilibrium current width are dedicated to a comprehensive overview of the critical threshold in a wide range of parameters. Additionally, a second critical threshold for high-Delta equilibria has been observed. A detailed comparison between a compressible gyrofluid code and EUTERPE is carried out. The two models are compared with each other in the linear regime by measuring growth rates over wave numbers of the most unstable mode for two setups of parameters. Analytical scaling predictions of the dispersion relation relevant to the low-Delta regime are discussed. Employing nonlinear simulations of both codes the saturated island half width and oscillation frequency of the magnetic islands are compared in the small-Delta range. Both models agree very well in the limit of marginal instability and differ slightly with decreasing wave vector. Recently, the full polarisation response in the quasi-neutrality equation was implemented in EUTERPE using the Padé approximation of the full gyrokinetic polarisation term. Linear simulation results including finite ratios of ion to electron temperature are benchmarked with the dispersion relation obtained from a hybrid model. Finite temperature effects influence the saturated island width slightly with increasing ion to electron temperature ratio which has been verified by both models.
The realistic description of the physical processes in quantum optical systems requires careful investigation of the interplay between quantum dissipation and entanglement generation. In this thesis, we have considered from a microscopical perspective the entanglement generation in semiconductor microcavities at short times, the dissipative evolution of the quantum harmonic oscillator towards a stationary state, and the nonclassical properties of the asymptotic states of different photonic systems. In our description of two-dimensional semiconductor microcavities we showed that two different pump configurations can be used to stimulate parametric scattering processes between polaritons that lead to the generation of internal polariton entanglement. A moving polariton induces an ultrafast electric polarisation as a source of light that serves as a probe of the internal entanglement properties. The identification of the nonclassical correlations of the emitted photons is based on entanglement witnesses that can also be used for the quantification of entanglement, e.g., in terms of the Schmidt number. The simultaneous creation of multiple branch entangled photon pairs renders it possible to generate an arbitrary number of entangled qubit states. By adjusting the number of pump beams and their spectral properties, one can optimize the Bell-type correlations within one ore more of those entangled qubits. Quantum dissipation can be studied in a microscopic setting with the well known model of a central oscillator coupled linearly to a bath of harmonic oscillators. We showed that equilibration of the central oscillator is the generic behaviour, which is prevented only in situations in which the classical oscillator equation of motion possesses undamped oscillatory solutions. Because of its localised spectral function, the infinite linear harmonic chain is an example for this behaviour. Thermalisation of the central oscillator depends on additional conditions. Equipartition of kinetic and potential energies requires the weak damping limit but is independent on the initial condition. The initial bath preparation enters the asymptotic temperature. Essential for the thermalisation of several oscillators is, that the asymptotic temperature is independent of the central oscillator frequency, which is fulfilled if the initial bath energy distribution matches that of a thermal state. Nevertheless, because this condition involves the sum of kinetic and potential energy, full thermalisation is possible in environments with nonthermal individual energy distributions, even in those far from thermal equilibrium. We showed, that even in the absence of full thermalisation the fluctuations of the central oscillator follow a generalised fluctuation dissipation theorem that reduces to the well known thermal result whenever the central oscillator thermalises in the strict sense. Photonic systems such as two-level emitters in a cavity or semiconductor microcavities are employed in quantum optics applications. The realistic theoretical description of the physical processes requires the use of methods from quantum optics as well as fromthe field of quantum dissipation. Our focus was on the correct theoretical description of the emission from systems with strong coupling. The analysis of the light generated by emitters in a cavity reveals a non-trivial dependence of the photon statistics on the light-matter coupling and temperature. Clearly identifiable parameters regimes with sub- and super-Poissonian photon statistics appear at strong and ultrastrong coupling, and lie immediately next to each other. We provided an approximate rule to relate the emission characteristics for a single emitter to those obtained for few emitters under an appropriate scaling of the emitter-cavity coupling. In accordance with this rule, the generation of noncassical light is easier with more emitters. The outright failure of the quantum optical master equation at predicting any of the features observed in the emission statistics shows that using the correct master equation is essential in all situations. Including internal dissipation channels we showed that a continuously driven semiconductor microcavity generates entangled light even at infinitely large times. The entanglement generation is thus robust against decoherence under realistic experimental conditions. Because the pair correlations between polaritons can sustain over long times and distances in these solid-state devices, a microcavity is a highly efficient source of entangled light and therefore well suited for quantum optics applications.
This thesis investigated dielectric barrier discharges (DBDs) in N2-O2 gas mixtures at atmospheric pressure, with a focus on the gas discharge physics. The main goal was to evaluate whether possible control mechanisms exist that can manipulate the breakdown and the development of DBDs, especially for pulsed operation. To examine the pre-breakdown phase, the actual breakdown and the main DBD development, DBDs in a double-sided, single filament arrangement with a 1 mm discharge gap were investigated by means of electrical and optical diagnostics with high resolutions. Spectrally- and temporally-resolved iCCD pictures (2D in space), spectrally- and spatio-temporally-resolved streak camera and CCS images (1D in space) were simultaneously recorded accompanied by a full electrical characterisation with fast voltage and current probes. Sinusoidal- and pulsed-driven DBDs were found to have a qualitatively similar spatio-temporal development, i.e. a cathode-directed ionisation front (v ~ 10^6 m/s, positive streamer mechanism), followed by a transient glow-like phase in the gap. For sinusoidal operation, the slope of the applied voltage is flat (dU/dt ~ 1 V/ns) compared to pulsed operation (dU/dt ~ 100 V/ns). Thus, during the longer pre-phase of the sine-driven DBD, many more charge carriers were generated, in contrast to the pulsed-driven DBDs, where the pre-phase is limited by the short voltage rise time. Consequently, just before the breakdown occurs, the charge carrier density is higher for sine-driven DBDs, i.e. the positive streamer starts in a highly pre-ionised environment, which leads to a lower propagation velocity. In addition to limiting the pre-phase (lower pre-ionisation), the steep voltage slope of the pulsed DBD amplifies the streamer breakdown because the applied voltage rises significantly during its propagation. Therefore, the transferred electrical charge and the electrical power of a single DBD can be controlled by the applied voltage amplitude, but only in pulsed operation. In addition to the effects of different voltage slope steepness, the pulse width is an excellent parameter in the pulsed operation to set the pre-ionisation, by shifting the DBDs into the after-glow of the previous discharge using asymmetrical HV pulse waveforms. The subsequent DBDs ignite in different pre-ionised conditions, defined by the residual charge carrier densities in the gap that originated from the previous DBD. The breakdown characteristics of these DBDs could be controlled down to the fundamental level. This thesis has described for the first time four different breakdown regimes in single filament DBDs for 0.1 vol% N2 in O2 and connected them to the processes during their pre-phases. The “classic” DBD development (a cathode-directed streamer followed by a transient glow discharge) could be controlled in a certain range, followed by a transition first to a breakdown regime featuring a simultaneous propagation of a cathode- and an anode-directed streamer, and finally to a reignition of the previous DBDs without any propagation, just by reducing the pulse width (time between two subsequent DBDs), i.e. increasing the pre-ionisation level. All differences between the DBDs at rising and falling slopes could be explained by the different pre-conditions in the gap. The O2 concentration in the N2-O2 gas mixtures offers another way of controlling the pre-ionisation. Due to the electron attachment as a consequence of the electronegativity of oxygen, the electron density decreases for higher O2 admixtures. Furthermore, the differences in the first Townsend ionisation coefficient and in the photo-ionisation between N2 and O2 influence the DBD behaviour as well. To some extent, some of the reported effects achieved by varying the pulse width at a fixed O2/N2 ratio were also observed for a fixed pulse width and changing O2 concentration. Hence, the response of the DBD properties to changing pre-ionisation levels seems to be a general principle of DBD control. Additional effects of the O2/N2 ratio, such as an increasing DBD inception jitter or higher streamer velocities, were also reported. Finally, a reverse of the effects induced by the O2 admixture such as DBD emission duration or DBD inception delay, was observed for O2 concentrations below 0.01 vol%, and were especially pronounced at a pressure of 0.5 bar. For 0.1 vol% O2 in N2, a minimal electron recombination rate was found, which can be explained by the different decay and recombination rates of positive nitrogen and oxygen ions. These different rates effect the charge carrier dynamics and consequently, the pre-ionisation in the gap. In conclusion, this investigation has highlighted the importance of volume memory processes on the breakdown and development of single filament DBDs at elevated pressures.
This thesis delves into some very important scientific challenges for the stellarator concept as a whole and W7-X in particular, namely, how one effectively interfaces the hot plasma with the material walls of the experiment, in special how the plasma heat and particle fluxes are controlled. The fundamental concept that will be used in W7-X for particle and heat exhaust is the island divertor. A number of theoretical and numerical studies have been performed to guide the design of the divertor components. The actual divertor components are in series production at this time, and are largely compatible with the expected heat loads. However, with the sophisticated codes now available, it has become clear that there are some, otherwise very attractive, operational scenarios that could lead to overloading of the W7-X divertors. At least one mitigation strategy was proposed but was until now not analyzed in sufficient detail. In this thesis, state-of-the-art codes are used to analyze this previously proposed mitigation strategy; they are also used to develop several alternative mitigation schemes, which may in the end be advantageous. The work performed here shows not only that it is conceivable to solve this already identified problem in new and arguably better ways but also that the W7-X coil set has enough degrees of freedom that many important long-pulse plasma effects can be effectively mimicked in short-pulse operation. This opens up a rich research program in the early phases of operation and may therefore lead to a significant acceleration of the scientific program to control and optimize the divertor operation in W7-X. The main scientific challenge for the island divertor operation in W7-X is that, since the divertor geometry is now fixed, the magnetic field structure must be adjusted to the divertor geometry, or additional plasma-facing components must be manufactured and installed. Well before this thesis work was done, such additional plasma-facing components were proposed. These are called scraper elements (SEs). As a part of this work, computer simu- lations were performed in order to obtain a better knowledge base regarding the SEs. To analyze the effect of the SE, edge plasma physics simulation code EMC3-Eirene, was used, in combination with state-of-the-art magneto hydrodynamic (MHD) equilibrium codes. This combination was computationally non-trivial and new, and it has led to important insights. One main result of this study is that the SEs significantly reduce the particle exhaust capabilities in steady state operation; this is a concern for W7-X. To test and further quantify this deleterious effect, physics experiments with a prototype SE should be performed as soon as possible, ideally in the first operation campaigns before the approximately two-year break needed to complete W7-X for steady-state operation. In 3 this first operation phase, however, the necessary combination of plasma parameters, heating power, and achievable pulse length is not accessible. This means, on the one hand, that the problem described will not be present in the first operation phase; on the other hand, the physics implications of installing an SE would appear not to be experimentally testable in that phase. One major finding of this thesis is that the coil system of W7-X is flexible enough to allow such an early experimental test. Different stages of high performance long-pulse discharge can be effectively mimicked in the experiment by a targeted use of the available coil sets. Thus, even in the early phases of the W7-X program one can assess both the protection capabilities of the SEs and their effects on particle exhaust and plasma performance in general. These mimic scenarios also have the potential to test other possibilities for divertor pro- tection besides the SE. Such strategies are addressed in this thesis. The two most promising strategies identified here can be classified as plasma shift and iota control. Both adjust the edge magnetic field to better fit the divertor geometry. This is done slowly but dynamically — i.e. during a long plasma discharge.
Synopsis
C+60 has been proposed to be responsible for two of the diffuse interstellar bands (DIBs), the absorption features observed in the visible-to-near-infrared spectra of the interstellar medium. However, a confirmation requires laboratory gas-phase spectra, which are so far not available. We plan to develop a novel spectroscopy technique that will allow us to obtain the first gas-phase spectra of C+60, and that will be applicable to other complex organic molecules such as polycyclic aromatic hydrocarbons. The current status of the experimental setup, the ideas behind the measurement scheme and the preparatory work toward its implementation will be presented.
Synopsis
A network of ion sources is being developed on the 300-kV acceleration platform of the cryogenic storage ring (CSR) at the Max-Planck-Institut für Kernphysik. It consists of several types of sources like a metal ion sputtering source (MISS), a Penning source, a laser vaporization (LVAP) source, and an electrospray ionization (ESI) source to produce a large variety of ions which can be studied for photon and electron interaction in a ro-vibrationally cold environment. Furthermore a storage device such as a radiofrequency quadrupole (RFQ) is foreseen for internal state cooling and accumulation of rarely produced species.
Abstract
We have demonstrated efficient injection and trapping of a cold positron beam in a dipole magnetic field configuration. The intense 5 eV positron beam was provided by the NEutron induced POsitron source MUniCh facility at the Heinz Maier-Leibnitz Zentrum, and transported into the confinement region of the dipole field trap generated by a supported, permanent magnet with 0.6 T strength at the pole faces. We achieved transport into the region of field lines that do not intersect the outer wall using the
drift of the positron beam between a pair of tailored plates that created the electric field. We present evidence that up to 38% of the beam particles are able to reach the intended confinement region and make at least a 180° rotation around the magnet where they annihilate on an insertable target. When the target is removed and the
plate voltages are switched off, confinement of a small population persists for on the order of 1 ms. These results lend optimism to our larger aims to apply a magnetic dipole field configuration for trapping of both positrons and electrons in order to test predictions of the unique properties of a pair plasma.
Synopsis
By interaction with electrons in ion storage devices (ion-cyclotron-resonance and radio-frequency traps) negatively charged clusters of gold and aluminum have been produced up to the 6th and 10th charge state, respectively. The production of these poly-anions opens exciting new possibilities to measure their lifetimes, to monitor their relaxation schemes after laser radiation, as well as to probe their Coulomb barriers.