Refine
Year of publication
- 2022 (36) (remove)
Document Type
- Article (30)
- Doctoral Thesis (6)
Language
- English (36) (remove)
Has Fulltext
- yes (36)
Is part of the Bibliography
- no (36)
Keywords
- - (12)
- ionosphere (2)
- low temperature plasma (2)
- plasma (2)
- solar EUV (2)
- ARPES (1)
- Argon metastables (1)
- Biomechanics (1)
- Boltzmann equation (1)
- Cell biophysics (1)
Institute
- Institut für Physik (36) (remove)
Publisher
- IOP Publishing (6)
- AIP Publishing (5)
- MDPI (5)
- Copernicus (4)
- Wiley (3)
- American Physical Society (APS) (2)
- Frontiers Media S.A. (2)
- Springer Nature (2)
- Cambridge University Press (1)
This work investigates turbulence in the core plasma of the optimised stellarator
Wendelstein 7-X. It focuses on experimental characterisation and
evaluation of the electrostatic micro-instabilities, which drive turbulent fluctuations,
and the saturation of turbulence by zonal flows. Expectations for
Wendelstein 7-X are formulated by reviewing theoretical work and with
the help of gyrokinetic simulations. The experimental analysis centres on
line-integrated density fluctuation measurements with the phase contrast
imagining diagnostic in electron cyclotron heated hydrogen discharges. An
absolute amplitude calibration was implemented, and a method for reliable
determination of dominant phase velocities in wavenumber-frequency
spectra of density fluctuations has been developed. Line-averaged density
fluctuation levels are observed to vary between magnetic configurations.
The wavenumber spectra exhibit a dual cascade structure, indicating fully
developed turbulence. The dominant instability driving turbulent density
fluctuations on transport relevant scales is identified as ion-temperaturegradient-
driven modes, which are mainly localised in the edge region of the
confined plasma. Despite the line-integrated nature of the measurement, the
localisation of density fluctuations is shown by comparing their dominant
phase velocity with the radial profile of the E × B rotation velocity due to
the ambipolar neoclassical electric field. Nonlinear gyrokinetic simulations
and a simplified plasma rotation model within a synthetic diagnostic confirm
the localisation. Oscillations of the dominant phase velocity indicate
the existence of zonal flows as a saturation mechanism of ion-temperaturegradient-
driven turbulence. A direct effect on turbulent density fluctuation
amplitudes and radial transport is observed.
The layer-by-layer method is a robust way of surface functionalization using a wide range of materials, e.g. synthetic and natural polyelectrolytes (PEs), proteins and nanoparticles. Thus, this method yields films with applications in diverse areas including biology and medicine. Sequential adsorption of different oppositely charged macromolecules can be used to prepare tailored films with controlled molecular organization. In biomedical research, electrically conductive coatings are of interest. In manuscript 1, we investigated films sequentially assembled from the polycation poly (diallyldimethyl-ammonium) (PDADMA) and modified carbon nanotubes (CNTs), with CNTs serving as the electrically conductive material. We assume that charge transport occurs through CNT contacts. We showed that with more than four CNT/PDADMA bilayers, the electrical conductivity is constant and independent of the number of CNT/PDADMA bilayers. A conductivity up to 4∙10^3 S/m was found. It is possible to control the conductivity with the CNT concentration of the CNT deposition suspension. A higher CNT concentration resulted in thicker CNT/PDADMA bilayers, but in a lower conductivity per bilayer. We suspect that an increased CNT concentration leads to a rapid CNT adsorption without the possibility to rearrange themselves. If PDADMA then adsorbs on the disordered CNTs in the next deposition step, the average thickness of the polymer layer is thicker than on the more ordered CNT layer from the dilute solution. This leads to an increased PE monomer/CNT ratio and lower conductivity. More polycations between the CNT layers leads to less CNT contacts. Thus, the controlled composition of films can be used to fulfill specific requirements.
For many applications of polyelectrolyte multilayers (PEMs), cheap PEs with a broad distribution of molecular weights are used. It was unknown whether the distribution of molecular weights of the PE in the adsorption solution is maintained during the adsorption process and hence in the film. To investigate this, the PSS adsorption solution in article 2 consisted of a binary mixture of short and long poly (styrene sulfonate) (PSS). A good model system to study layered films in terms of composition are PDADMA/PSS multilayers. Neutron reflectivity and in-situ ellipsometry measurements were carried out to determine the PSS composition in the film and the growth regimes. At a mole fraction of long PSS of 5 % or more in solution, the exponential growth (which is characteristic of short PSS) is totally suppressed, and only long PSS is deposited in the resulting multilayer. Variation of adsorption time of PSS showed that short PSS first adsorbs to the surface but is displaced by long PSS. Between 0 and 5 % of long PSS in the adsorption solution exponential growth occurs. The fraction of short PSS in the film continuously decreases with the increase of long PSS in the adsorption solution. In the assembly of films prepared from binary PSS mixtures, the short PSS leaves the film through adsorption/desorption steps both during PSS adsorption and during PDADMA adsorption (as PDADMA/PSS complexes). Both techniques show that the composition of the film does not correspond to that of the deposition solution. The composition and thus the properties of the resulting multilayer are influenced by the choice of adsorption time. Moreover, we conclude that a multilayer grown from a polydisperse polyelectrolyte contains fewer mobile low molecular weight polymers than the deposition solution.
In manuscript 1 and article 2, the composition of multilayers was studied. In manuscript 1 adsorption kinetics were important for the arrangement of CNTs on the surface. In article 2, the adsorption kinetics, i.e. the diffusion of the polyelectrolytes to the surface, was also investigated. In article 3, we investigated the influence of the composition of the film as well as the preparation condition on the mobility of PEs in the film. The molecular weight of the polycation PDADMA and the NaCl concentration of the deposition solution were varied. The vertical PSS diffusion constant D_PSS within the PDADMA/PSS multilayers was measured using neutron reflectivity. The salt concentration of the preparation solution defines the polymer conformation during deposition. The molecular weight of the polycation determines the degree of intertwining. Together, both parameters determine the polyanion-polycation coupling and thus the PSS mobility within the network. Log−log display of D_PSS vs the molecular weight of PDADMA and fits to two power laws (D_PSS ∝ X_n(PDADMA)^(-m) ∝ M_w(PDADMA)^(-m)) reveals for films built from 10 or 200 mM NaCl a kink. Below and above the kink, the dependence of D_PSS on M_w(PDADMA) can be described by different power laws. For Χ_n(PDADMA) < X_n,kink(PDADMA) ≈ 288, the exponents are consistent with the predictions of the sticky reptation model. X_n(PDADMA) ≈ 288 is the entanglement limit. For Χ_n(PDADMA) > X_n,kink(PDADMA) ≈ 288, the decrease of D_PSS with M_w(PDADMA) is larger than below the entanglement limit, which is indicative of sticky reptation and entanglement. The PSS diffusion constant of films built from 100 mM NaCl drops three orders of magnitude when increasing the molecular weight of PDADMA from 45 kDa to 72 kDa. To figure out if an immobile PSS fraction exists in the film built from 72 kDa PDADMA (beyond the entanglement limit), the film was annealed at different conditions in article 4: both temperature and salt concentration were varied. For data analysis, the simplest model with two PSS fractions with different diffusion constants was used. These diffusion constants increase as the temperature of the surrounding solution is increased. As assumed in article 3, an immobile PSS fraction exists when annealing at room temperature. At higher annealing temperatures, at least two diffusion processes must be distinguished: the diffusion of the highly mobile PSS fraction through the entire film and a slow PSS fraction, mowing in a limited way. The choice of preparation conditions determines whether a polyelectrolyte multilayer can intermix completely. It is not clear if complete intermixing will ever occur for films built with PDADMA beyond the entanglement limit. It is possible that the diffusion is more complex. Long-term measurements will clarify this question. Calculating scattering length density profiles with subdiffusive behavior would be interesting and is a challenge for the future. Furthermore, immobile fractions are only visible with long annealing times. We hypothesize that an immobile or nearly immobile fraction is present whenever the dependence of D_PSS on the molecular weight of PDADMA cannot be described by the sticky reptation. To verify this hypothesis, further studies are necessary.
All results presented and discussed in the manuscript and articles show that by varying the preparation conditions, tailored films can be built. The composition of the film is also determined by the adsorption kinetics. In addition, the mobility of the PEs within the multilayers can be controlled by varying the conformation, mingling and entanglement of the chains within the film. The influence of the salt concentration in the preparation solution on the growth regimes during film formation is part of our future research. It is planned to investigate films built of different PDADMA molecular weights under varied annealing conditions to better understand the mobile and immobile fractions.
Kinetic modeling and infrared spectroscopy of charge carriers across the plasma-wall interface
(2022)
In this thesis, charge transport at the plasma-wall interface is investigated theoretically, on a semiclassical, microscopic level. Based on the Boltzmann and Poisson equations a set of equations is derived and numerically solved to model charge carriers both within a semiconducting wall and a gaseous plasma in front of it. While the plasma is considered collision-free, within the solid, phonon collisions, as well as recombination processes between conduction band electrons and valence band holes are considered. This results, for the first time, in a self-consistent modeling of both the gaseous electron-ion plasma and the electron-hole plasma in the solid on the same footing. Utilizing specific approximations for different physical scenarios, numerical solutions are presented both for the floating and the electronically contacted (biased) interface. In the latter case, the current voltage characteristic is calculated and shown to heavily depend on the charge kinetics within the wall.
Furthermore, we present optical methods to measure the wall charge noninvasively. These utilize the influence of the deposited surplus charges on the optical reflection coefficient of the surface. By calculating the optical response of these charges, we show that the magnitude of the surface charge can be inferred from the change in the reflectivity of the surface caused by the presence of the plasma. While nonlocal effects are considered, it is shown analytically and numerically that these can be neglected at the scales of the considered physical systems.
Cell mechanical properties reveal substantial information on cell state and function. Utilizing mechanics as a label-free biomarker allows for investigation of fundamental cellular processes as well as biomedical applications, e.g., disease diagnosis. High-throughput methods for accessing the elastic properties of cells in suspension from hydrodynamic deformation in a microfluidic constriction are available with real-time analysis rates of up to 1000 cells per second. However, accessing elastic as well as viscous properties of cells and multicellular systems in suspension as well as adhered to surfaces at high throughput has not been possible so far. In this thesis, I approached this question and developed as well as applied microfluidic and holographic technologies to analyze the viscoelastic properties of single cells and multicellular aggregates, respectively.
First, I demonstrated that real-time deformability cytometry (RT-DC) can be applied in transfusion medicine, where the highest quality standards have to be maintained while blood product release is time-critical. We showed for platelet and red blood cell concentrates as well as for hematopoietic stem cells that their mechanical properties can be used for label-free quality assessment. The results have been published in Lab on a Chip (Aurich et al. 2020).
For RT-DC and many other methods based on hydrodynamic deformation, the constriction size has to be adapted to the objects of interest to allow for a shear-induced deformation. We introduced virtual fluidic channels, which are established by two co-flowing aqueous polymer solutions. Virtual fluidic channels can be precisely adjusted in their cross section, allowing for mechanical phenotyping of single cells as well as cell clusters or tissue spheroids in one microfluidic system. Importantly, measurements can also be performed in standard microfluidic geometries beyond soft lithography, e.g., in the cuvette of a flow cytometer. For cell spheroids as a model system for multicellular aggregates, we show a 10-fold lower Young's modulus of the tissue compared to single-cell mechanics, suggesting cell-cell and cell-matrix interactions being potential contributors to the mechanics of multicellular aggregates. Our work on virtual fluidic channels has been published in Nature Communications (Panhwar et al. 2020).
Within this thesis, I expanded the high-throughput elastic phenotyping performed by RT-DC towards viscoelastic cell properties by developing dynamic real-time deformability cytometry (dRT-DC). Dynamic tracking of cells while passing the microfluidic constriction allows to access steady-state (elasticity) and time-dependent (viscosity) material properties for a complete viscoelastic characterization of cells in suspension at high throughput. I introduced a shape mode decomposition based on a Fourier transformation, which allows to disentangle the superimposed stress responses to an extensional stress at the channel inlet and a constant shear stress in the channel. These hydrodynamic stress distributions are present in almost every microfluidic channel geometry. From the separated stress responses, viscoelastic material properties can be determined independent of cell shape.
We demonstrated experimentally the sensitivity of dRT-DC to cytoskeletal alterations and confirmed the validity of the method by reference measurements on calibrated hydrogel beads. In our work, we also presented a viscoelastic fingerprint of the major subpopulations of peripheral blood: erythrocytes, granulocytes, and peripheral blood mononuclear cells (PBMCs) (e.g., lymphocytes and monocytes), all characterized by the same method. The technique and the results have been published in Nature Communications (Fregin et al. 2019).
In cell mechanical methods based on hydrodynamic deformation, cell shape is usually monitored while a stress is applied. For extraction of material properties as well as for studying shape dynamics, it is essential to describe cell shape yielding highest strain differences for a given microfluidic system and experimental setting. Using dRT-DC, I compared nine different shape descriptors to analyze cell deformation in an extensional as well as shear flow. A relaxation time analysis was performed on different levels of data aggregation from single cells to an ensemble scale. I demonstrated that the steady-state deformation can be predicted from stress response curves without them reaching the steady-state. This is important for cell mechanical measurements in microfluidic systems as the characteristic times are unknown in general and as the channel length is fixed. In addition, by introducing a cut-off criterion for how much of the response trace needs to be captured within the channel, the analysis time per cell can be reduced while material properties can still be extracted. Performing simulations, I compared the accuracy of relaxation times extracted from ensemble and single-cell studies under experimental conditions. Introducing a scoring system to evaluate which combinations of shape descriptors and analysis strategies provide biggest effect size, we concluded that single-cell analyses in an extensional flow are most sensitive to cytoskeletal modifications independent of shape parametrization. The manuscript was submitted to the Biophysical Journal.
Finally, I translated the fast non-contact cell mechanical probing from suspension to adherent cells. No such technology has been available and with the majority of cells being adherent, a robust label-free method for mechanophenotyping at high-throughput is required. Within this thesis, I have introduced and realized a new concept: holographic vibration spectroscopy (HVS), where adherent cells are mechanically excited on a vibrating surface while their height oscillations are measured optically. Analysis is done in an interferometric heterodyne setup by using frequency multiplexing and time-averaged holography in off-axis configuration. Based on interference images captured by a high-speed complementary metal-oxide-semiconductor (CMOS) camera, I established a mathematical model to reconstruct the vibration amplitude of adherent cells as well as their retardation phase compared to the exciting vibration. From the amplitude and phase response, viscoelastic parameters can be derived, which have to be investigated in subsequent studies.
In summary, I introduced in my work two high-throughput methods for the viscoelastic characterization of suspended as well as adherent cells while highlighting applications in tissue mechanics and transfusion medicine that are relevant not only in basic but also in translational research.
In this work, spatial distributions for reactive stable and transient species that are involved
in the reaction cycle of H2O2, a key species for biomedical applications, were
determined directly in the effluent of a kINPen-sci plasma jet. The small diameter
of cold atmospheric pressure plasma jets and their operation at atmospheric pressure
that causes strong quenching reactions make diagnostics challenging. Here, various diagnostic
techniques have been employed and adapted for the use in the effluent of a
cold atmospheric pressure plasma jet, which were laser atomic absorption spectroscopy
(LAAS) at 811.5 nm for the detection of Ar(3P2), picosecond two-photon absorption
laser-induced fluorescence spectroscopy (ps-TALIF) at 225 nm and 205 nm for the
detection of O and H atoms, respectively, and continuous wave cavity ring-down spectroscopy
(cw-CRDS) at 1.506 µm for the detection of HO2, and cw-CRDS at 8000 µm
for the detection of H2O2. All these methods provide absolute number densities. In
this work, spatial distributions within the small diameter of the effluent of a CAPJ
were obtained, which have not been reported so far literature. In order to overcome the
line-of-sight limitations of CRDS, radial scans were performed and transformed into a
spatial distribution by using Abel inversion.
Based on the determined spatial density distributions for H atoms, O atoms, HO2
radicals, and H2O2 molecules, together with the investigated impact of humidity in the
feed gas on the excitation dynamics and the production of Ar(3P2), and finally on a
comparison of the experimental results to a plasma chemical and reacting flow model,
three different zones with varying reaction kinetics were identified. The densities close
to the nozzle of the kINPen-sci plasma jet were dominated by reactions within the
plasma zone including the dissociation of H2O added to the Ar feed gas and O2 that
was presumably transferred into the plasma zone by counter-propagating ionisation
waves. Notably, also the larger molecules, such as HO2 and H2O2 were mainly formed
within the plasma zone of the plasma jet. Between 1.5 mm and 5 mm below the nozzle,
the atomic species and molecular radicals generated in the plasma zone were consumed
by chemical reactions with the surrounding gas, whose composition was controlled by
applying a gas curtain. At further distances from the nozzle, where typically biological
samples are positioned, only H2O2 and HO2 were observed.
With this work, it is successfully demonstrated that even for the small diameters of
cold atmospheric pressure plasma jets the determination of spatial profiles for reactive
transient and stable species is possible within the effluent. By combining the experimental
results, important insights into the formation and consumption of H2O2 and its
precursors were gained, which are essential for the understanding of use of plasmas in
biomedical applications.
Detecting changes in plasmas is compulsory for control and the detection of novelties.
Moreover, automated novelty detection allows one to investigate large data sets to substantially
enhance the efficiency of data mining approaches. To this end we introduce permutation entropy
(PE) for the detection of changes in plasmas. PE is an information-theoretic complexity measure
based in fluctuation analysis that quantifies the degree of randomness (resp. disorder,
unpredictability) of the ordering of time series data. This method is computationally fast and
robust against noise, which allows the evaluation of large data sets in an automated procedure.
PE is applied on electron cyclotron emission and soft x-ray measurements in different
Wendelstein 7-X low-iota configuration plasmas. A spontaneous transition to high core-electron
temperature (Te) was detected, as well as a localized low-coherent intermittent oscillation which
ceased when Te increased in the transition. The results are validated with spectrogram analysis
and provide evidence that a complexity measure such as PE is a method to support in-situ
monitoring of plasma parameters and for novelty detection in plasma data. Moreover, the
acceleration in processing time offers implementations of plasma-state-detection that provides
results fast enough to induce control actions even during the experiment.
Insight into the Impact of Oxidative Stress on the Barrier Properties of Lipid Bilayer Models
(2022)
As a new field of oxidative stress-based therapy, cold physical plasma is a promising tool for several biomedical applications due to its potential to create a broad diversity of reactive oxygen and nitrogen species (RONS). Although proposed, the impact of plasma-derived RONS on the cell membrane lipids and properties is not fully understood. For this purpose, the changes in the lipid bilayer functionality under oxidative stress generated by an argon plasma jet (kINPen) were investigated by electrochemical techniques. In addition, liquid chromatography-tandem mass spectrometry was employed to analyze the plasma-induced modifications on the model lipids. Various asymmetric bilayers mimicking the structure and properties of the erythrocyte cell membrane were transferred onto a gold electrode surface by Langmuir-Blodgett/Langmuir-Schaefer deposition techniques. A strong impact of cholesterol on membrane permeabilization by plasma-derived species was revealed. Moreover, the maintenance of the barrier properties is influenced by the chemical composition of the head group. Mainly the head group size and its hydrogen bonding capacities are relevant, and phosphatidylcholines are significantly more susceptible than phosphatidylserines and other lipid classes, underlining the high relevance of this lipid class in membrane dynamics and cell physiology.
Particle-in-Cell (PIC) simulations are used to model the MS4 test thruster of Thales Deutschland. Given as input the geometric shape, material components, magnetic field and the operating parameters of the experiment, the model is able to reproduce the experimentally observed emission pattern in the plume. This is determined by the magnetic field line structure and the resulting plasma dynamics in the near-field region close to the exit.
Response of Osteoblasts to Electric Field Line Patterns Emerging from Molecule Stripe Landscapes
(2022)
Molecular surface gradients can constitute electric field landscapes and serve to control local cell adhesion and migration. Cellular responses to electric field landscapes may allow the discovery of routes to improve osseointegration of implants. Flat molecule aggregate landscapes of amine- or carboxyl-teminated dendrimers, amine-containing protein and polyelectrolytes were prepared on glass to provide lateral electric field gradients through their differing zeta potentials compared to the glass substrate. The local as well as the mesoscopic morphological responses of adhered osteoblasts (MG-63) with respect to the stripes were studied by means of Scanning Ion Conductance Microscopy (SICM) and Fluorescence Microscopy, in situ. A distinct spindle shape oriented parallel to the surface pattern as well as a preferential adhesion of the cells on the glass site have been observed at a stripe and spacing width of 20 μm. Excessive ruffling is observed at the spindle poles, where the cells extend. To explain this effect of material preference and electro-deformation, we put forward a retraction mechanism, a localized form of double-sided cathodic taxis.
Advancing Radiation-Detected Resonance Ionization towards Heavier Elements and More Exotic Nuclides
(2022)
RAdiation-Detected Resonance Ionization Spectroscopy (RADRIS) is a versatile method for highly sensitive laser spectroscopy studies of the heaviest actinides. Most of these nuclides need to be produced at accelerator facilities in fusion-evaporation reactions and are studied immediately after their production and separation from the primary beam due to their short half-lives and low production rates of only a few atoms per second or less. Only recently, the first laser spectroscopic investigation of nobelium (Z=102) was performed by applying the RADRIS technique in a buffer-gas-filled stopping cell at the GSI in Darmstadt, Germany. To expand this technique to other nobelium isotopes and for the search for atomic levels in the heaviest actinide element, lawrencium (Z=103), the sensitivity of the RADRIS setup needed to be further improved. Therefore, a new movable double-detector setup was developed, which enhances the overall efficiency by approximately 65% compared to the previously used single-detector setup. Further development work was performed to enable the study of longer-lived (t1/2>1 h) and shorter-lived nuclides (t1/2<1 s) with the RADRIS method. With a new rotatable multi-detector design, the long-lived isotope 254Fm (t1/2=3.2 h) becomes within reach for laser spectroscopy. Upcoming experiments will also tackle the short-lived isotope 251No (t1/2=0.8 s) by applying a newly implemented short RADRIS measurement cycle.
AbstractPulsed streamer discharges submerged in water have demonstrated potential in a number of applications. Especially the generation of discharges by short high-voltage pulses in the nanosecond range has been found to offer advantages with respect to efficacies and efficiencies. The exploited plasma chemistry generally relies on the initial production of short-lived species, e.g. hydroxyl radicals. Since the diagnostic of these transient species is not readily possible, a quantification of hydrogen peroxide provides an adequate assessment of underlying reactions. These conceivably depend on the characteristics of the high-voltage pulses, such as pulse duration, pulse amplitude, as well as pulse steepness.A novel electrochemical flow-injection system was used to relate these parameters to hydrogen peroxide concentrations. Accordingly, the accumulated hydrogen peroxide production for streamer discharges ignited in deionized water was investigated for pulse durations of 100 ns and 300 ns, pulse amplitudes between 54 kV and 64 kV, and pulse rise times from 16 ns to 31 ns. An independent control of the individual pulse parameters was enabled by providing the high-voltage pulses with a Blumlein line. Applied voltage, discharge current, optical light emission and time-integrated images were recorded for each individual discharge to determine dissipated energy, inception statistic, discharge expansion and the lifetime of a discharge.Pulse steepness did not affect the hydrogen peroxide production rate, but an increase in amplitude of 10 kV for 100 ns pulses nearly doubled the rate to (0.19 ± 0.01) mol l−1 s−1, which was overall the highest determined rate. The energy efficiency did not change with pulse amplitude, but was sensitive to pulse duration. Notably, production rate and efficiency doubled when the pulse duration decreased from 300 ns to 100 ns, resulting in the best peroxide production efficiency of (9.2 ± 0.9) g kWh−1. The detailed analysis revealed that the hydrogen peroxide production rate could be described by the energy dissipation in a representative single streamer. The production efficiency was affected by the corresponding discharge volume, which was comprised by the collective volume of all filaments. Hence, dissipating more energy in a filament resulted in an increased production rate, while increasing the relative volume of the discharge compared to its propagation time increased the energy efficiency.
The lateral movement in lipid membranes depends on their diffusion constant within the membrane. However, when the flux of the subphase is high, the convective flow beneath the membrane also influences lipid movement. Lipid monolayers of an unsaturated fatty acid at the water–air interface serve as model membranes. The formation of domains in the liquid/condensed coexistence region is investigated. The dimension of the domains is fractal, and they grow with a constant growth velocity. Increasing the compression speed of the monolayer induces a transition from seaweed growth to dendritic growth. Seaweed domains have broad tips and wide and variable side branch spacing. In contrast, dendritic domains have a higher fractal dimension, narrower tips, and small, well-defined side branch spacing. Additionally, the growth velocity is markedly larger for dendritic than seaweed growth. The domains’ growth velocity increases and the tip radius decreases with increasing supersaturation in the liquid/condensed coexistence region. Implications for membranes are discussed.
AbstractMagneto-optical (MO) effects, viz. magnetically induced changes in light intensity or polarization upon reflection from or transmission through a magnetic sample, were discovered over a century and a half ago. Initially they played a crucially relevant role in unveiling the fundamentals of electromagnetism and quantum mechanics. A more broad-based relevance and wide-spread use of MO methods, however, remained quite limited until the 1960s due to a lack of suitable, reliable and easy-to-operate light sources. The advent of Laser technology and the availability of other novel light sources led to an enormous expansion of MO measurement techniques and applications that continues to this day (see section 1). The here-assembled roadmap article is intended to provide a meaningful survey over many of the most relevant recent developments, advances, and emerging research directions in a rather condensed form, so that readers can easily access a significant overview about this very dynamic research field. While light source technology and other experimental developments were crucial in the establishment of today’s magneto-optics, progress also relies on an ever-increasing theoretical understanding of MO effects from a quantum mechanical perspective (see section 2), as well as using electromagnetic theory and modelling approaches (see section 3) to enable quantitatively reliable predictions for ever more complex materials, metamaterials, and device geometries. The latest advances in established MO methodologies and especially the utilization of the MO Kerr effect (MOKE) are presented in sections 4 (MOKE spectroscopy), 5 (higher order MOKE effects), 6 (MOKE microscopy), 8 (high sensitivity MOKE), 9 (generalized MO ellipsometry), and 20 (Cotton–Mouton effect in two-dimensional materials). In addition, MO effects are now being investigated and utilized in spectral ranges, to which they originally seemed completely foreign, as those of synchrotron radiation x-rays (see section 14 on three-dimensional magnetic characterization and section 16 on light beams carrying orbital angular momentum) and, very recently, the terahertz (THz) regime (see section 18 on THz MOKE and section 19 on THz ellipsometry for electron paramagnetic resonance detection). Magneto-optics also demonstrates its strength in a unique way when combined with femtosecond laser pulses (see section 10 on ultrafast MOKE and section 15 on magneto-optics using x-ray free electron lasers), facilitating the very active field of time-resolved MO spectroscopy that enables investigations of phenomena like spin relaxation of non-equilibrium photoexcited carriers, transient modifications of ferromagnetic order, and photo-induced dynamic phase transitions, to name a few. Recent progress in nanoscience and nanotechnology, which is intimately linked to the achieved impressive ability to reliably fabricate materials and functional structures at the nanoscale, now enables the exploitation of strongly enhanced MO effects induced by light–matter interaction at the nanoscale (see section 12 on magnetoplasmonics and section 13 on MO metasurfaces). MO effects are also at the very heart of powerful magnetic characterization techniques like Brillouin light scattering and time-resolved pump-probe measurements for the study of spin waves (see section 7), their interactions with acoustic waves (see section 11), and ultra-sensitive magnetic field sensing applications based on nitrogen-vacancy centres in diamond (see section 17). Despite our best attempt to represent the field of magneto-optics accurately and do justice to all its novel developments and its diversity, the research area is so extensive and active that there remains great latitude in deciding what to include in an article of this sort, which in turn means that some areas might not be adequately represented here. However, we feel that the 20 sections that form this 2022 magneto-optics roadmap article, each written by experts in the field and addressing a specific subject on only two pages, provide an accurate snapshot of where this research field stands today. Correspondingly, it should act as a valuable reference point and guideline for emerging research directions in modern magneto-optics, as well as illustrate the directions this research field might take in the foreseeable future.
AbstractThe 2022 Roadmap is the next update in the series of Plasma Roadmaps published by Journal of Physics D with the intent to identify important outstanding challenges in the field of low-temperature plasma (LTP) physics and technology. The format of the Roadmap is the same as the previous Roadmaps representing the visions of 41 leading experts representing 21 countries and five continents in the various sub-fields of LTP science and technology. In recognition of the evolution in the field, several new topics have been introduced or given more prominence. These new topics and emphasis highlight increased interests in plasma-enabled additive manufacturing, soft materials, electrification of chemical conversions, plasma propulsion, extreme plasma regimes, plasmas in hypersonics, data-driven plasma science and technology and the contribution of LTP to combat COVID-19. In the last few decades, LTP science and technology has made a tremendously positive impact on our society. It is our hope that this roadmap will help continue this excellent track record over the next 5–10 years.
AbstractGas puff modulation experiments are performed at ASDEX Upgrade in L-mode plasmas. We model the discharge with the ASTRA transport code in order to determine transport coefficients outside of a normalized radius of ρ
pol = 0.95. The experimental data is consistent with a range of particle diffusivities and pinch velocities of the order of D = (0.20 ± 0.13) m2 s−1 and v = (−1 ± 2) m s−1, respectively. The electron temperature response caused by the gas modulation permits to estimate also that heat diffusivity χ
e increases almost linearly when collisionality rises due to fuelling. The fuelling particle flux is amplified by recycling, overcompensating losses.
The nature and origin of electronic nematicity remains a significant challenge in our
understanding of the iron-based superconductors. This is particularly evident in the
iron chalcogenide, FeSe, where it is currently unclear how the experimentally
determined Fermi surface near the M point evolves from having two electron pockets
in the tetragonal state, to exhibiting just a single electron pocket in the nematic state. This
has posed a major theoretical challenge, which has become known as the missing electron
pocket problem of FeSe, and is of central importance if we wish to uncover the secrets
behind nematicity and superconductivity in the wider iron-based superconductors. Here,
we review the recent experimental work uncovering this nematic Fermi surface of FeSe
from both ARPES and STM measurements, as well as current theoretical attempts to
explain this missing electron pocket of FeSe, with a particular focus on the emerging
importance of incorporating the dxy orbital into theoretical descriptions of the nematic
state. Furthermore, we will discuss the consequence this missing electron pocket has on
the theoretical understanding of superconductivity in this system and present several
remaining open questions and avenues for future research.
The capability to parameterize shapes is of essential importance in biomechanics to identify cells, to track their motion, and to quantify deformation. While various shape descriptors have already been investigated to study the morphology and migration of adherent cells, little is known of how the mathematical definition of a contour impacts the outcome of rheological experiments on cells in suspension. In microfluidic systems, hydrodynamic stress distributions induce time-dependent cell deformation that needs to be quantified to determine viscoelastic properties. Here, we compared nine different shape descriptors to characterize the deformation of suspended cells in an extensional as well as shear flow using dynamic real-time deformability cytometry. While stress relaxation depends on the amplitude and duration of stress, our results demonstrate that steady-state deformation can be predicted from single cell traces even for translocation times shorter than their characteristic time. Implementing an analytical simulation, performing experiments, and testing various data analysis strategies, we compared single cell and ensemble studies to address the question of computational costs vs experimental accuracy. Results indicate that high-throughput viscoelastic measurements of cells in suspension can be performed on an ensemble scale as long as the characteristic time matches the dimensions of the microfluidic system. Finally, we introduced a score to evaluate the shape descriptor-dependent effect size for cell deformation after cytoskeletal modifications. We provide evidence that single cell analysis in an extensional flow provides the highest sensitivity independent of shape parametrization, while inverse Haralick's circularity is mostly applicable to study cells in shear flow.
We investigate local THz field generation using spintronic THz emitters to enhance the resolution for micrometer-sized imaging. Far-field imaging with wavelengths above 100 µm limits the resolution to this order of magnitude. By using optical laser pulses as a pump, THz field generation can be confined to the area of laser beam focusing. The divergence of the generated THz beam due to laser beam focusing requires the imaged object to be close to the generation spot at a distance below the THz field wavelength. We generate THz-radiation by fs-laser pulses in CoFeB/Pt heterostructures, based on spin currents, and detect them by commercial low-temperature grown-GaAs (LT-GaAs) Auston switches. The spatial resolution of THz radiation is determined by applying a 2D scanning technique with motorized stages allowing step sizes in the sub-micrometer range. Within the near-field limit, we achieve spatial resolution in the dimensions of the laser spot size on the micrometer scale. For this purpose, a gold test pattern is evaporated on the spintronic emitter separated by a 300 nm SiO2 spacer layer. Moving these structures with respect to the femtosecond laser spot, which generates THz radiation, allows for resolution determination. The knife-edge method yields a full-width half-maximum beam diameter of 4.9 +- 0.4 µm at 1 THz. The possibility to deposit spintronic emitter heterostructures on simple glass substrates makes them attractive candidates for near-field imaging in many imaging applications.
Copper tungsten oxide films are deposited with the help of reactive high power impulse magnetron sputtering (HiPIMS) in an argon/oxygen gas mixture. Two magnetrons, one equipped with a tungsten target and the other with a copper target, are employed. The HiPIMS discharge is operated with a repetition frequency of f=100 Hz. Pulse widths of 100 and 20 µs separated by 25 µs are chosen for the tungsten and copper target, respectively. Films deposited on two different glass substrates [soda lime glass and fluorine doped tin oxide (FTO) coated glass] are characterized by energy dispersive x-ray spectroscopy, x-ray photoelectron spectroscopy, x-ray diffraction, Raman spectroscopy, and ellipsometry. Photoelectrochemical activity was investigated by linear voltammetry. The composition and crystal structure of as-deposited and annealed films are found to depend on the deposition conditions. Annealed films deposited on FTO glass are composed of WO3 and CuWO4 or Cu2WO4 crystal phases. Films deposited on soda lime glass are subject to sodium diffusion into the films during annealing and the formation of Na2W2O7 and Na2W4O13 phases.
We examine the turbulence driven by the ion and electron temperature gradients in selected magnetic configurations of the Wendelstein 7-X (W7-X) stellarator. The inherent flexibility in the configuration space of W7-X enables us to find candidate configurations manifesting low turbulent transport. We follow insights gained by stellarator optimization techniques, in order to identify key geometric features, which are directly related to the ion and electron heat fluxes produced by plasma turbulence. One such a feature is the flux expansion at locations where the curvature is particularly unfavourable. Starting from a configuration routinely used in the W7-X experiment, we end up with an optimized configuration. Based on this equilibrium, we select a configuration from W7-X configuration database with a similar feature as the optimized one. With the help of nonlinear gyrokinetic simulations, we show that the heat flux in this configuration is less stiff than in the initial configuration, both for ion temperature gradient and electron temperature gradient turbulence.
Mechanical properties have been proven to be a pivotal parameter to enhance our understanding of living systems. While research during the last decades focused on cells and tissues, little is known about the role of organelle mechanics in cell function. Here, mitochondria are of specific interest due to their involvement in numerous physiological and pathological processes, e.g., in the production and homeostasis of reactive oxygen species (ROS). Using real-time fluorescence and deformability cytometry, we present a microfluidic technology that is capable to determine the mechanical properties of individual mitochondria at a throughput exceeding 100 organelles per second. Our data on several thousands of viable mitochondria isolated from rat C6 glial cells yield a homogenous population with a median deformation that scales with the applied hydrodynamic stress. In two proof-of-principle studies, we investigated the impact of exogenously and endogenously produced ROS on mitochondria mechanics. Exposing C6 cells to hydrogen peroxide (H2O2) triggers superoxide production and leads to a reduction in mitochondria size while deformation is increased. In a second study, we focused on the knockout of tafazzin, which has been associated with impaired remodeling of the mitochondrial membrane and elevated levels of ROS. Interestingly, our results reveal the same mechanical alterations as observed after the exposure to H2O2, which points to a unified biophysical mechanism of how mitochondria respond to the presence of oxidative stress. In summary, we introduce high-throughput mechanical phenotyping into the field of organelle biology with potential applications for understanding sub-cellular dynamics that have not been accessible before.
In our study, we determine the alignment of magnetic domains in a CoFeB layer using THz radiation. We generate THz pulses by fs laser pulses in magnetized CoFeB/Pt heterostructures based on spin currents. An LT-GaAs Auston switch detects the radiation phase sensitively and allows us to determine the magnetization alignment. Our scanning technique with motorized stages, with step sizes in the sub-micrometer range, allows us to image two dimensional magnetic structures. Theoretically, the resolution is restricted to half of the wavelength if focusing optics in the far-field limit are used. By applying near-field imaging, the spatial resolution is enhanced to the single digit micrometer range. For this purpose, spintronic emitters in diverse geometric shapes, e.g., circles, triangles, squares, and sizes are prepared to observe the formation of magnetization patterns. The alignment of the emitted THz radiation can be influenced by applying unidirectional external magnetic fields. We demonstrate how magnetic domains with opposite alignment and different shapes divided by domain walls are created by demagnetizing the patterns using minor loops and imaged using phase sensitive THz radiation detection. For analysis, the data are compared to Kerr microscope images. The possibility of combining this method with THz range spectroscopic information of magnetic texture or antiferromagnets in direct vicinity to the spintronic emitter makes this detection method interesting for a much wider range of applications probing THz excitation in spin systems with high resolution beyond the Abbe diffraction limit, limited solely by the laser excitation area.
Complex plasma is a state of soft matter where micrometer-sized particles are immersed in a weakly ionized gas. The particles acquire negative charges of the order of several thousand elementary charges in the plasma, and they can form gaseous, liquid and crystalline states. Direct optical observation of individual particles allows to study their dynamics on the kinetic level even in large many-particle systems. Gravity is the dominant force in ground-based experiments, restricting the research to vertically compressed, inhomogeneous clouds, or two-dimensional systems, and masking dynamical processes mediated by weaker forces. An environment with reduced gravity, such as provided on the International Space Station (ISS), is therefore essential to overcome this limitations. We will present the research goals for the next generation complex plasma facility COMPACT to be operated onboard the ISS. COMPACT is envisaged as an international multi-purpose and multi-user facility that gives access to the full three-dimensional kinetic properties of the particles.
Magnetooptical properties of one-dimensional aperiodic structures formed by stacking together magnetic and nonmagnetic layers according to the Kolakoski self-generation scheme are studied theoretically using the 4x4 transfer matrix method. The effect of the generation stage of the sequence, and the helicity and direction of light propagation through the magneto-photonic crystals on the transmission/reflection spectra as well as Faraday and ellipticity rotations, have been investigated. Our results reveal that this kind of aperiodic magneto-photonic crystals can be used for the fabrication of multifrequency laser cavities, and optical filters/sensors.
We use time-evolution techniques for (infinite) matrix product states to calculate, directly in the thermodynamic limit, the time-dependent photoemission spectra and dynamic structure factors of the half-filled Hubbard chain after pulse irradiation. These quantities exhibit clear signatures of the photoinduced phase transition from insulator to metal that occurs because of the formation of so-called η pairs. In addition, the spin dynamic structure factor loses spectral weight in the whole momentum space, reflecting the suppression of antiferromagnetic correlations due to the buildup of η-pairing states. The numerical method demonstrated in this work can be readily applied to other one-dimensional models driven out of equilibrium by optical pumping.
Alterations in the organization of the cytoskeleton precede the escape of adherent cells from the framework of cell–cell and cell‐matrix interactions into suspension. With cytoskeletal dynamics being linked to cell mechanical properties, many studies elucidated this relationship under either native adherent or suspended conditions. In contrast, tethered cells that mimic the transition between both states have not been the focus of recent research. Using human embryonic kidney 293 T cells we investigated all three conditions in the light of alterations in cellular shape, volume, as well as mechanical properties and relate these findings to the level, structure, and intracellular localization of filamentous actin (F‐actin). For cells adhered to a substrate, our data shows that seeding density affects cell size but does not alter their elastic properties. Removing surface contacts leads to cell stiffening that is accompanied by changes in cell shape, and a reduction in cellular volume but no alterations in F‐actin density. Instead, we observe changes in the organization of F‐actin indicated by the appearance of blebs in the semi‐adherent state. In summary, our work reveals an interplay between molecular and mechanical alterations when cells detach from a surface that is mainly dominated by cell morphology.
The biomechanical (Young's modulus, adhesion force, deformability) properties of platelets depend on the cytoskeleton and have an undisputed influence on physiological and pathological processes such as hemostasis and thrombosis. The alterations of these biomechanical properties can be used as label-free diagnostic markers in initiation or progressive diseases such as MYH9-inherited disease. Therefore, the focus of my thesis was to investigate the relationship between the changes in platelet cytoskeleton proteins and the resulting biomechanical properties using biophysical methods.
In the first chapter of my thesis I focused on my review of the biophysical methods that are most commonly used to assess and quantify the biomechanical properties of platelets. In this review, I provide an in-depth insight into the governing principles and instrumentation setup and discuss relevant examples applied to platelet mechanics. In addition, my review also summarizes the limitations of these biophysical methods and highlight latest improvements. The review covers the following techniques: micropipette aspiration, atomic force microscopy (AFM), scanning ion conductance microscopy (SICM), tensile force microscopy on hydrogel substrates, microcolumns, and deformable 3D substrates, and real-time deformability cytometry (RT-DC). This review is directed toward clinician scientists who are interested in exploring applications of single-cell based biophysical approaches in unraveling the role of platelet biomechanics in hemostasis and thrombosis research.
In the second chapter of my thesis, I present my research paper on the influence of commonly used ex vivo anticoagulants on the intrinsic biomechanical properties and functional parameters (e.g. activation profils) of human platelets. To comprehensively assess this, platelets obtained in different ex vivo anticoagulants such as ACD-A, Na-Citrate, K2-EDTA, Li-Heparin, and r-Hirudin were used, and their biomechanical properties were determined by real-time fluorescence and deformability cytometry (RT-FDC). Flow cytometry, and confocal laser scanning fluorescence microscopy were used to determine platelet function properties. K2-EDTA and Li-Heparin were found to affect platelet biomechanics by increasing actin polymerization of non-stimulated human platelets. This increased actin polymerization results in decreased platelet deformation. It is recommended that an ex vivo anticoagulant such as ACD-A, Na-Citrate, or r-Hirudin be chosen for the study of the cytoskeleton of human platelets and, if possible, that it not be exchanged, because comparability of results is not assured. Furthermore, I demonstrate the significance of choosing correct ex vivo anticoagulants in RT-FDC by showing that platelets from a healthy donor and a MYH9 patient with the E1841K point mutation differ in their deformation. This paper is the first comprehensive investigation at the single platelet level to establish the relevance of preanalytical standardization in platelet sample preparation for biomechanical studies.
The third chapter of my thesis is focused on the biomechanical analyses of platelets and thrombi from MYH9-related disease. Here I studied three Myh9 mouse lines with a point mutation in the Myh9 gene at positions 702, 1424, or 1841. Furthermore, two MYH9 patients (MYH9 p.D1424N, MYH9 p.E1841K) were examined. MYH9-related disease (MYH9-RD) presents with macrothrombocytopenia with a moderate bleeding tendency. It is caused by mutations in the MYH9 gene that lead to alteration of non-muscle myosin heavy chains type IIA (NMMHC IIA), resulting in disruption of the platelet cytoskeleton. Western blot analysis, flow cytometry, in vitro aggregometry, and transmission electron microscopy demonstrated that Myh9 point mutant mice have comparable primary function compared to the control group. The heterozygous point mutations in the Myh9 gene resulted in decreased platelet deformation (RT-FDC), decreased platelet adhesion to collagen (single platelet force spectroscopy-SPFS), and decreased platelet-platelet interaction forces (SPFS). Decreased platelet force (Micropost Arrays) results in softer thrombi (colloidal probe Spectroscopy), impaired clot retraction, and thus prolonged bleeding time. The R702C, D1424N, and E1841K mutations have a similar effect on platelet biomechanical functions, although the E1841K mutation had less impact on thrombus formation and stiffness. MYH9-RD patients have an increased risk of bleeding, and the antifibrinolytic drug tranexamic acid (TXA) is one way to control bleeding complications in these patients. It was shown that TXA treatment significantly reduced bleeding time in the three Myh9 mouse models, confirming that the enhanced bleeding phenotype due to decreased platelet forces in Myh9 mutant mice can be compensated by the addition of TXA.
With the biophysical methods and research results presented in my thesis, it is clear that it is essential to study the altered response of the platelet cytoskeleton by cytoskeletal mutations, biochemical, physical stimuli, or by pharmacological aspects. This will provide us with an opportunity to better understand the underlying mechanisms and thus contribute to better clinical treatment.
Solar Activity Driven 27‐Day Signatures in Ionospheric Electron and Molecular Oxygen Densities
(2022)
Abstract
The complex interactions in the upper atmosphere, which control the height‐dependent ionospheric response to the 27‐day solar rotation period, are investigated with the superposed epoch analysis technique. 27‐day signatures describing solar activity are calculated from a solar proxy (F10.7) and wavelength‐dependent extreme ultraviolet (EUV) fluxes (Thermosphere Ionosphere Mesosphere Energetics and Dynamics/Solar EUV Experiment), and the corresponding 27‐day signatures describing ionospheric conditions are calculated from electron density profiles (Pruhonice ionosonde station) and O2 density profiles (Global‐scale Observations of the Limb and Disk). The lag analysis of these extracted signatures is applied to characterize the delayed ionospheric response at heights from 100 to 300 km and the impact of major absorption processes in the lower (dominated by O2) and upper ionosphere (dominated by O) is discussed. The observed variations of the delay in these regions are in good agreement with model simulations in preceding studies. Additionally, the estimated significance and the correlation of the delays based on both ionospheric parameters are good. Thus, variations such as the strong shift in 27‐day signatures for the O2 density at low heights are also reliably identified (up to half a cycle). The analysis confirms the importance of ionospheric and thermospheric coupling to understand the variability of the delayed ionospheric response and introduces a method that could be applied to additional ionosonde stations in future studies. This would allow to describe the variability of the delayed ionospheric response spatially, vertically and temporally and therefore may contribute further to the understanding of processes and improve ionospheric modeling.
Comparison of mesospheric sodium profile retrievals from OSIRIS and SCIAMACHY nightglow measurements
(2022)
Sodium airglow is generated when excited sodium atoms emit electromagnetic radiation while they are relaxing from an excited state into a lower energetic state. This electromagnetic radiation, the two sodium D lines at 589.0 and 589.6 nm, can usually be detected from space or from ground. Sodium nightglow occurs at times when the sun is not present and excitation of sodium atoms is a result of chemical reaction with ozone. The detection of sodium nightglow can be a means to determine the amount of sodium in the earth's mesosphere and lower thermosphere (MLT). In this study, we present time series of monthly mean sodium concentration profiles, by utilizing the large spatial and temporal coverage of satellite sodium D-line nightglow measurements. We use the OSIRIS/Odin mesospheric limb measurements to derive sodium concentration profiles and vertical column densities and compare those to measurements from SCIAMACHY/Envisat and GOMOS/Envisat. Here we show that the Na D-line limb emission rate (LER) and volume emission rate (VER) profiles calculated from the OSIRIS and SCIAMACHY measurements, although the OSIRIS LER and VER profiles are around 25 % lower, agree very well in shape and overall seasonal variation. The sodium concentration profiles also agree in shape and magnitude, although those do not show the clear semi-annual cycle which is present in the LER and VER profiles. The comparison to the GOMOS sodium vertical column densities (VCDs) shows that the OSIRIS VCDs are of the same order of magnitude although again the semi-annual cycle is not as clear. We attribute the differences in the LER, VER and sodium profiles to the differences in spatial coverage between the OSIRIS and SCIAMACHY measurements, the lower signal-to-noise ratio (SNR) of the SCIAMACHY measurements and differences in local time between the measurements of the two satellites.
The heaviest actinide elements are only accessible in accelerator-based experiments on a one-atom-at-a-time level. Usually, fusion–evaporation reactions are applied to reach these elements. However, access to the neutron-rich isotopes is limited. An alternative reaction mechanism to fusion–evaporation is multinucleon transfer, which features higher cross-sections. The main drawback of this technique is the wide angular distribution of the transfer products, which makes it challenging to catch and prepare them for precision measurements. To overcome this obstacle, we are building the NEXT experiment: a solenoid magnet is used to separate the different transfer products and to focus those of interest into a gas-catcher, where they are slowed down. From the gas-catcher, the ions are transferred and bunched by a stacked-ring ion guide into a multi-reflection time-of-flight mass spectrometer (MR-ToF MS). The MR-ToF MS provides isobaric separation and allows for precision mass measurements. In this article, we will give an overview of the NEXT experiment and its perspectives for future actinide research.
A hollow cathode discharge with a Ti cathode and a positively biased ring anode was operated in Ar + N2 or Ar + O2 gas mixtures. The energy distribution of plasma ions is investigated with the help of energy-resolved mass spectrometry. Singly and doubly charged Ar+ and Ar2+ ions and molecular N+2 or O+2 ions are the most abundant ionic species. The kinetic energy of all plasma ions is enhanced by a positive anode voltage.
The idea of estimating stratospheric aerosol optical thickness from the twilight colours in historic paintings – particularly under conditions of volcanically enhanced stratospheric aerosol loading – is very tantalizing because it would provide information on the stratospheric aerosol loading over a period of several centuries. This idea has in fact been applied in a few studies in order to provide quantitative estimates of the aerosol optical depth after some of the major volcanic eruptions that occurred during the past 500 years. In this study we critically review this approach and come to the conclusion that the uncertainties in the estimated aerosol optical depths are so large that the values have to be considered questionable. We show that several auxiliary parameters – which are typically poorly known for historic eruptions – can have a similar effect on the red–green colour ratio as a change in optical depth typically associated with eruptions such as, for example, Tambora in 1815 or Krakatoa in 1883. Among the effects considered here, uncertainties in the aerosol particle size distribution have the largest impact on the colour ratios and hence the aerosol optical depth estimate. For solar zenith angles exceeding 80∘, uncertainties in the stratospheric ozone amount can also have a significant impact on the colour ratios. In addition, for solar zenith angles exceeding 90∘ the colour ratios exhibit a dramatic dependence on solar zenith angle, rendering the estimation of aerosol optical depth highly challenging. A quantitative determination of the aerosol optical depth may be possible for individual paintings for which all relevant parameters are sufficiently well constrained in order to reduce the related errors.
The Mt. Pinatubo eruption in 1991 had a severe impact on the Earth system, with a well-documented warming of the tropical lower stratosphere and a general cooling of the surface. This study focuses on the impact of this event on the mesosphere by analyzing solar occultation temperature data from the Halogen Occultation Experiment (HALOE) instrument on the Upper Atmosphere Research Satellite (UARS). Previous analyses of lidar temperature data found positive temperature anomalies of up to 12.9 K in the upper mesosphere that peaked in 1993 and were attributed to the Pinatubo eruption. Fitting the HALOE data according to a previously published method indicates a maximum warming of the mesosphere region of 4.1 ± 1.4 K and does not confirm significantly higher values reported for that lidar time series. An alternative fit is proposed that assumes a more rapid response of the mesosphere to the volcanic event and approximates the signature of the Pinatubo with an exponential decay function having an e-folding time of 6 months. It suggests a maximum warming of 5.4 ± 3.0 K, if the mesospheric perturbation is assumed to reach its peak 4 months after the eruption. We conclude that the HALOE time series probably captures the decay of a Pinatubo-induced mesospheric warming at the beginning of its measurement period.
The high-latitude phenomenon of noctilucent clouds (NLCs) is characterised by a silvery-blue or pale blue colour. In this study, we employ the radiative transfer model SCIATRAN to simulate spectra of solar radiation scattered by NLCs for a ground-based observer and assuming spherical NLC particles. To determine the resulting colours of NLCs in an objective way, the CIE (International Commission on Illumination) colour-matching functions and chromaticity values are used. Different processes and parameters potentially affecting the colour of NLCs are investigated, i.e. the size of the NLC particles, the abundance of middle atmospheric O3 and the importance of multiply scattered solar radiation. We affirm previous research indicating that solar radiation absorption in the O3 Chappuis bands can have a significant effect on the colour of the NLCs. A new result of this study is that for sufficiently large NLC optical depths and for specific viewing geometries, O3 plays only a minor role for the blueish colour of NLCs. The simulations also show that the size of the NLC particles affects the colour of the clouds. Cloud particles of unrealistically large sizes can lead to a reddish colour. Furthermore, the simulations show that the contribution of multiple scattering to the total scattering is only of minor importance, providing additional justification for the earlier studies on this topic, which were all based on the single-scattering approximation.
Carbon-cluster ions are produced by laser irradiation of glassy carbon in high vacuum. In the case of positively charged species, a bimodal cluster distribution including fullerenes with cluster-size-to-charge ratios of up to a few hundred is observed. Resolving isotopologues by use of a multireflection time-of-flight mass spectrometer allows the detection and abundance determination of multiply charged clusters. It is found that mono-, di-, and tricationic fullerenes are produced, have similar size-over-charge-state ranges, and follow log-normal distributions known to be characteristic of an underlying coalescent growth. A statistical simulation is shown to reproduce the results.
Abstract
Based on the analysis of electron density Ne profiles (Grahamstown ionosonde), a case study of the height‐dependent ionospheric response to two 27‐day solar rotation periods in 2019 is performed. A well‐defined sinusoidal response is observed for the period from 27 April 2019 to 24 May 2019 and reproduced with a Thermosphere‐Ionosphere‐Electrodynamics General Circulation Model simulation. The occurring differences between model and observations as well as the driving physical and chemical processes are discussed based on the height‐dependent variations of Ne and major species. Further simulations with an artificial noise free sinusoidal solar flux input show that the Ne delay is defined by contributions due to accumulation of O+ at the Ne peak (positive delay) and continuous loss of O2+ ${\mathrm{O}}_{2}^{+}$ in the lower ionosphere (negative delay). The neutral parts' 27‐day signatures show stronger phase shifts. The time‐dependent and height‐dependent impact of the processes responsible for the delayed ionospheric response can therefore be described by a joint analysis of the neutral and ionized parts. The return to the initial ionospheric state (and thus the loss of the accumulated O+) is driven by an increase of downward transport in the second half of the 27‐day solar rotation period. For this reason, the neutral vertical winds (upwards and downwards) and their different height‐dependent 27‐day signatures are discussed. Finally, the importance of a wavelength‐dependent analysis, statistical methods (superposed epoch analysis), and coupling with the middle atmosphere is discussed to outline steps for future analysis.