Refine
Year of publication
Document Type
- Doctoral Thesis (161)
- Article (98)
- Conference Proceeding (17)
Has Fulltext
- yes (276)
Is part of the Bibliography
- no (276)
Keywords
- - (78)
- Plasma (25)
- Plasmaphysik (25)
- Plasmadiagnostik (14)
- Stellarator (13)
- Komplexes Plasma (7)
- Polyelektrolyt (7)
- Wendelstein 7-X (7)
- Cluster (6)
- Kernfusion (6)
Institute
- Institut für Physik (276) (remove)
Publisher
- IOP Publishing (63)
- MDPI (13)
- Copernicus (7)
- AIP Publishing (6)
- Frontiers Media S.A. (4)
- Wiley (4)
- American Physical Society (APS) (3)
- Springer Nature (3)
- Cambridge University Press (2)
- European Geosciences Union (2)
An interesting aspect in the research of complex (dusty) plasmas is the experimental study of the interaction of micro-particles with the surrounding plasma for diagnostic purposes. Local electric fields can be determined from the behaviour of particles in the plasma, e.g. particles may serve as electrostatic probes. Since in many cases of applications in plasma technology it is of great interest to describe the electric field conditions in front of floating or biased surfaces, the confinement and behaviour of test particles is studied in front of floating walls inserted into a plasma as well as in front of additionally biased surfaces. For the latter case, the behaviour of particles in front of an adaptive electrode, which allows for an efficient confinement and manipulation of the grains, has been experimentally studied in terms of the dependence on the discharge parameters and on different bias conditions of the electrode. The effect of the partially biased surface (dc and rf) on the charged micro-particles has been investigated by particle falling experiments. In addition to the experiments, we also investigate the particle behaviour numerically by molecular dynamics, in combination with a fluid and particle-in-cell description of the plasma.
The rapid neutron-capture or the r-process is responsible for the origin of about half of the neutron-rich atomic nuclei in the universe heavier than iron. For the calculation of the abundances of those nuclei, atomic masses are required as one of the input parameters with very high precision. In the present work, the masses of the neutron-rich Zn isotopes (A=71 to 81) lying in the r-process path have been measured in the ISOLTRAP experiment at ISOLDE/CERN. The mass of 81Zn has been measured directly for the first time. The half-lives of the nuclides ranged from 46.5 h (72Zn) down to 290 ms (81Zn). In case of all the nuclides, the relative mass uncertainty (∆m/m) achieved was in the order of 1E-8 corresponding to a 100-fold improvement in precision over previous measurements.
This thesis presents the production of polyanionic clusters within two ion storage devices:
Considering a Penning trap, the accessible range of polyanionic aluminium clusters has been expanded up to the 10th charge state. In particular, abundance curves for clusters with 5 to 9 excess electrons have been measured for the first time and analysed with respect to their lifetime-dependent appearance sizes. These sizes reveal a nearly quadratic dependency on the charge state for experimentally accessible lifetimes.
Additionally, the production of polyanionic clusters has been enabled in a radiofrequency ion trap. Therefore, the transition from a harmonic to a digital 2- and 3-state guiding signal has been investigated with respect to the ion storage. The passing of electrons through the trap during field-free periods of the guiding signal led to the first production of polyanionic clusters within a radiofrequency ion trap.
Modern cavity QED and cavity optomechanical systems realize the interaction of light with mesoscopic devices, which exhibit discrete (atom-like) energy spectra or perform micromechanical motion. In this thesis we have studied the crossover from the quantum regime to the classical limit of two prototypical models, the Dicke model and the generic optomechanical model. The physical problems considered in this approach range from a ground state phase transition, its dynamical response to general nonequilibrium dynamics including Hamiltonian and driven dissipative chaotic motion. The classical limit of these models follows from the classical limit of at least one of its subsystems. The classical equations of motion result from the respective quantum equations through the application of the semiclassical approximation, i.e., the neglect of quantum correlations. The approach of the results from quantum mechanics to the prediction of the classical equations can be obtained by subsequently decreasing the respective scaling parameter. In order to obtain exact results we have utilized advanced numerical methods, e.g., the Lanczos diagonalization method for ground state calculations, the Kernel Polynomial Method for dynamical response functions, Chebyshev recursion for time propagation, and quantum state diffusion for open system dynamics. We have studied the quantum phase transition of the Dicke model in the classical oscillator limit. Our work shows that in this limit the transition occurs already for finite spin length but with the same critical behavior as in the classical spin limit. We have derived an effective model for the oscillator degrees of freedom and have discussed the differences of both classical limits with respect to quantum fluctuations around the mean-field ground state and spin-oscillator entanglement. In this thesis we have proposed a variational ansatz for the Dicke model which extends the mean-field description through the inclusion of spin-oscillator correlations. The ansatz becomes correct in the limit of large oscillator frequency and in the limit of a large spin. For the latter it captures the leading quantum corrections to the classical limit exactly including the spin-oscillator entanglement entropy. We have studied the dynamics of spin and oscillator coherent states in the nonresonant Dicke model at weak coupling. In this regime periodic collapses and revivals of Rabi oscillations occur, which are accompanied by the buildup and decay of atom-field entanglement. The spin-oscillator wave function evolves into a superposition of multiple field coherent states that are correlated with the spin configuration. In our work we provide a description of the underlying dynamical mechanism based on perturbation theory. Our analysis shows that collapse and revival at nonresonance is distinguished from the resonant case treated within the rotating wave approximation by the appearance of two time scales instead of one. We have extended our study of the Dicke dynamics to the case of increasing spin length, as the system approaches the classical spin limit. We described the emergence of collective excitations above the ground state that converge to the coupled spin-oscillator oscillations observed in the classical limit. With increased spin length the corresponding Green functions thus reveal quantum dynamical signatures of the quantum phase transition. For the dynamics at larger coupling and energy, classical phase space drift and quantum diffusion hinders the direct comparison of quantum and classical observables. As we show in our work, signatures of classical quasiperiodic orbits can be identified in the Husimi phase-space functions of the propagated wave function and individual eigenstates with energies close to that of the quasiperiodic orbits. The analysis of the generic optomechanical system complements our study of cavity QED systems by a quantum dissipative system. In this thesis we have shown for the first time, how the route to chaos in the classical optomechanical system takes place, given as a sequence of consecutive period doubling bifurcations of self-induced cantilever oscillations. In addition to the semiclassical dynamics we have analyzed the possibility of chaotic motion in the quantum regime. Our results showed that quantum mechanics protects the optomechanical system against irregular dynamics. In sufficient distance to the semiclassical limit simple periodic orbits reappear and replace the classically chaotic motion. In this way direct observation of the dynamical properties of an optomechanical system makes it possible to pin down the crossover from quantum to classical mechanics.
Polyelektrolyt-Multischichtfilme (PEMs) werden durch schichtweise (eng. Layer by Layer, LbL)
sequentielle Ablagerung von entgegengesetzt geladenen Polyelektrolyten auf einer
geladenen Oberfläche hergestellt. Die LbL Methode kann auf verschiedene Weise zur
Herstellung von PEM eingesetzt werden, z.B. durch Tauchen, Rotation, Sprühen oder
Beschichten mit elektromagnetischen und fluidischen Methoden. In allen Artikeln dieser
Dissertation wurde die Tauchmethode verwendet. Durch zyklische Wiederholung der
Abscheidungsschritte kann die Dicke der PEM leicht gesteuert werden. Die Oberflächen und
Grenzflächen des Films können mit der LbL Technik auch durch die elektrostatische
Wechselwirkung zwischen positiv und negativ geladenen Polyelektrolyten modifiziert werden.
Auf diese Weise lassen sich einige Eigenschaften des Films optimieren, beispielsweise
Oberflächenadhäsion und Biokompatibilität, z. B. in der Gewebezüchtung oder es kann
eine Monoschicht als Barriere an der Grenzfläche des Films adsorbiert werden, um die
Diffusion von Molekülen im Film zu begrenzen z.B. bei Aufnahme oder Freisetzen von
Medikamenten.
Daher wurde die Rolle einiger Faktoren, wie die molare Masse der Polyelektrolyte und das
Vorhandensein von Salzionen in der Präparationslösung auf die interne Struktur sowie die
Oberfläche der PEMs untersucht.
Für alle Untersuchungen dieser Dissertation wurde das häufig verwendete Modell-System aus
dem positiv geladenen Polyelektrolyten Polydimethyldiallylammonium (PDADMA), und dem
negativ geladenen Polyelektrolyten Polystyrolsulfonat (PSS), verwendet. Die Dicke der Filme
wurde mit Röntgenreflektometrie, Ellipsometrie, UV-Vis-NIR-Spektrometrie bestimmt die
interne Struktur mit Neutronenreflektometrie und die Oberflächentopografie mit Rasterkraftmikroskopie
(eng. AFM) und Rasterelektronenmikroskopie (eng. SEM).
In Artikel 1 wurde mit Hilfe der Neutronenreflektometrie die Struktur des Filmes und die
Diffusion des Polyanions PSS (DPSS) senkrecht zur PEM Oberfläche untersucht. Variiert wurde
die molare Masse des Polykations PDADMA und die Salzkonzentration der
Präparationslösung. PEMs wurden aus drei verschiedenen NaCl-Konzentrationen in der
Abscheidelösung hergestellt: 10 mmol/L, 100 mmol/L und 200 mmol/L. Die Salzkonzentration
in der Polyelektrolytlösung bestimmt die Konformation der Polyelektrolyte während der
Adsorption. Die Ketten werden weniger flach adsorbiert, wenn mehr Salzionen in der
Adsorptionslösung vorhanden sind und die Filme werden dicker.
Die Diffusion nahm mit zunehmender molarer Masse von PDADMA in Filmen, die aus 10
mmol/L, 100 mmol/L und 200 mmol/L hergestellt wurden, um mindestens drei Größenordnungen
ab, denn die Zunahme der Kettenlänge, erhöht den Vernetzungsgrad im Film. Dabei zeigten Filme aus 10 mmol/L (NaCl) mit einer niedrigen molaren Masse von PDADMA
die größte Diffusion (DPSS = 4.9 × 10−20 m2/s). Der Diffusionskoeffizient DPSS als Funktion des
Polymerisationsgrades folgt zwei Potenzgesetzen mit einem Übergang bei einem
Polymerisationsgrad von 288. Bei kürzeren Ketten stimmt der Exponent des Potenzgesetzes
gut mit dem Modell der Sticky Reptation überein. Bei längeren Ketten war der Exponent viel
größer, was vermuten lässt, dass die PSS-Ketten in einem zunehmend komplexen
Polymernetzwerk gefangen sind. Wir verstehen den Übergang als Verschränkungsgrenze für
das untersuchte System.
Bei PEMs, die aus 100 mmol/L hergestellt wurden, konnte kein Potenzgesetz festgestellt
werden. DPSS nahm sprunghaft um drei Größenordnungen ab, wenn die molare Masse von
PDADMA von 45 kDa auf 72 kDa erhöht wurde.
In Artikel 2 wurden die Oberfläche von PEMs aus Polyelektrolyten unterschiedlicher molarer
Massen untersucht. Die Oberflächenrauhigkeit und die Dicke des Films wurden mit
Röntgenreflektometrie und Ellipsometrie bestimmt. Die Oberflächentopografie wurde mit AFM
und SEM aufgenommen. Alle PEMs wurden aus PE-Lösungen mit 0,1 mol/L NaCl hergestellt.
Die Oberfläche der PEM, präpariert aus langem PSS und kurzem PDADMA oder langem PSS
und langem PDADMA, war immer flach. Bei einer Filmzusammensetzung aus langen
Polykationen (Mw (PDADMAlang) = 322 kDa) und kurzen PSS Molekülen (Mw (PSSkurz) = 10,7
kDa) wurden drei Wachstumsregime identifiziert: exponentiell, parabolisch und linear. Im
exponentiellen Wachstumsregime bildet sich nach etwa sieben Beschichtungsschritten von
PDADMA/PSS (eng. bilayers, bl) eine granulare Oberflächenstruktur aus mit einer
Oberflächenrauigkeit von 1,6 nm und einer lateralen Periodizität von 70 nm. Mit zunehmender
Schichtzahl nimmt die Oberflächenrauhigkeit sowie die laterale Periodizität zu. Im
parabolischen Wachstumsbereich aggregieren die Strukturen zu Säulen, mit einer
Oberflächenrauigkeit bis zu 23 nm und einer lateralen Periodizität bis zu 210 nm. Im linearen
Wachstumsregime sind die säulenförmigen Domänen vollständig ausgebildet und die
Oberflächenstruktur ändert sich nicht mehr. Diese Strukturen wurden schon während der
Präparation, bereits vor dem Trocknen beobachtet. Dies zeigt, dass sich die Strukturen
während der Abscheidung von PDADMA/PSS bilden.
Bei Beobachtungen im Vakuum (SEM) war im linearen Bereich die Säulenstruktur bei der
PDADMA terminierten PEM ausgeprägter als bei der PSS terminierten.
Diese Strukturen bilden sich nur im Film mit anfänglichem exponentiellem Wachstum, d.h.
wenn kurzen Ketten durch den ganzen Film diffundieren können. Das legt nahe, dass es für
die Strukturbildung nicht ausreicht, dass der Polyelektrolyt kurz ist, sondern dass es auch
beweglich sein muss. Um dies näher zu untersuchen wurde in Manuskript 1 die molare Masse des PSS variiert. Es
wurden PEMs aus langem 322 kDa PDADMA und kurzem 6,5 kDa und 3,9 kDa PSS
hergestellt und mit den Messungen von PEMs aus 10,7 kDa PSS verglichen.
Die Verkürzung von PSS hat subtile Auswirkungen auf den Filmaufbau und die
Selbststrukturierung. Für PEM aus PSS mit einer molaren Masse von 6,5 kDa konnten nur
zwei Wachstumsregime ermittelt werden: ein exponentielles und ein lineares Wachstumsregime.
Der Übergang vom exponentiellen zum linearen Wachstum erfolgte bei 28
Doppelschichten. Bei PEMs, die aus 3,9 kDa PSS hergestellt wurden, wurde bis zu 29 bl nur
ein exponentielles Wachstum beobachtet. Dies zeigt, dass eine Verringerung der molaren
Masse von PSS das exponentielle Wachstum auf eine größere Anzahl von abgeschiedenen
Doppelschichten ausdehnt. Dies ist auf die zunehmende PSS-Diffusion zurückzuführen.
In allen Filmen wurden Selbststrukturierungen beobachtet. Der Abstand und die Höhe der
säulenartigen Domänen nehmen mit jeder abgeschiedenen PDADMA/PSS-Doppelschicht
deutlich zu. Der durchschnittliche Domänenabstand ändert sich weniger und korreliert mit den
vertikalen Wachstumsregimen. Der Domänenabstand schwankt zwischen 70 nm und 750 nm.
Die größten lateralen Abstände und ein längeres exponentielles Wachstumsregime wurden
mit dem kürzesten PSS (3,9 kDa) erreicht, was auf die hohe Mobilität des PSS zurückgeführt
wird. Die Domänenhöhe ist immer kleiner als der Domänenabstand. Wenn die PEM mit
PDADMA terminiert ist, sind die Oberflächenrauhigkeit und der durchschnittliche Abstand
größer als bei PSS terminierten Filme in Wasser und nach dem Trocknen.
Darüber hinaus wurden zwischen den Domänen Filamente beobachtet. Die Filamente
bestehen aus PDADMA/PSS-Komplexen. Eine mögliche Vermutung ist, dass diese Komplexe
zwischen den Domänen diffundieren und ihren Abstand anpassen.
Die Oberflächenstruktur des Films aus PSS 10,7 kDa zeigt eine symmetrische gaußförmige
Höhenverteilung in allen drei Wachstumsregimen von 5 bis 40 bl. Für die kurze PSS war eine
solche Verteilung nur bis 15 bl (6,5 kDa) bzw. 20 bl (3,9 kDa) zu beobachten. Danach wurde
für 6,5 kDa schiefe Verteilung mit Ausläufern zu größeren Höhen beobachtet. 3,9 kDa PSS
zeigte dann sogar eine bimodale Höhenverteilung.
Die lineare Ladungsdichte von PDADMA ist etwa halb so groß wie die von PSS. Folglich
adsorbiert PDADMA in einer bürstenartigen Konformation. Wenn die oberste Schicht
PDADMA ist, dann ist das PDADMA-Molekül nicht fest an die Oberfläche gebunden. Daher ist
die durch die Oberflächenspannung erzeugte Kraft für PDADMA groß genug, um zu einer
Veränderung der Oberflächenmorphologie und folglich zu einer kleineren Gesamtoberfläche
zu führen.Außerdem sind die Domänen in 1 M NaCl-Lösung stabil, schrumpfen aber in 2 M NaCl enorm,
während ihr Abstand leicht zunimmt.
Diese Untersuchungen zeigten, dass die Mobilität des Polyelektrolyten PSS die
Voraussetzung für den Aufbau einer strukturierten Oberfläche in einem PEM-System aus
PDADMA/PSS ist. Diese Ergebnisse zeigten auch, dass die Verkürzung der Kette der PSS Moleküle
die Herstellung von Filmen erleichtert, deren Dicke und Selbststrukturierung je nach
dem gewünschten Zweck angepasst werden kann. Solche Filme können in der Medizin und
Biologie als geeignetes Substrat zur Optimierung der Adsorption von Zellen und anderen
Molekülen oder als Nanofilter effektiv eingesetzt werden.
In dieser Dissertation konnte ich zeigen, wie die Verkürzung der Kette der PSS-Moleküle zur
Bildung einer lateralen selbststrukturierten Oberfläche führt und wie die zunehmende Mobilität
der PSS-Moleküle die Oberflächenmorphologie signifikant beeinflusst.
Abstract
Alkali ion beams are among the most intense produced by the ISOLDE facility. These were the first to be studied by the ISOLTRAP mass spectrometer and ever since, new measurements have been regularly reported. Recently the masses of very neutron-rich and short-lived cesium isotopes were determined at ISOLTRAP. The isotope 148Cs was measured directly for the first time by Penning-trap mass spectrometry. Using the new results, the trend of two-neutron separation energies in the cesium isotopic chain is revealed to be smooth and gradually decreasing, similar to the ones of the barium and xenon isotopic chains. Predictions of selected microscopic models are employed for a discussion of the experimental data in the region.
Recent experimental campaigns in the Wendelstein 7-X stellarator, a
plasma-confining device designed to investigate the Magnetic Confinement Fusion
(MCF) approach to generating electrical power, have shown that the injection of
fuelling pellets had an unexpected and considerable impact on the performance of
the plasma. Rather than simply refuelling the device and `diluting' the plasma
energy, pellet injection is followed by a significant increase in the ratio of
the ion temperature to the electron temperature. It has been suggested that this
is not merely due to the improved confinement following the reduction of
turbulent transport after the pellet material has homogenised with the bulk
plasma, but also due to a direct transfer of energy from electrons to ions. The
proposed mechanism for this energy transfer is the ambipolar expansion of the
pellet plasmoid, the localised plasma structure produced by the
ionisation of ablated pellet material, along magnetic field lines.
Early work on pellet plasmoid expansion predicted that half the heating power
deposited in plasmoid electrons by collisions with hot ambient electrons is
transferred to plasmoid ions in the form of flow velocity as the plasmoid
expands. The complicated nature of the system of the pellet plasmoid embedded in
the ambient plasma, particularly the behaviour of electrons, which experience
many collisional and collisionless phenomena on multiple disparate timescales,
means that early models of the expansion were not wholly self-consistent, but
rather made use of strong approximations that apply in some regions of the
plasmoid but not in others. For example, only electrons and ions associated with
the plasmoid were rigorously treated, meaning that the framework was one of
`expansion into vacuum'. Combined with the assumption of Maxwellian electrons,
this led to an electric potential that was unbounded at infinity. Naturally, the
validity of the conclusions of such a model are called into question because the
approximations lose their validity far from the plasmoid and as time advances,
yet predictions about the final state of the plasma are desired. A deeper
investigation is required: careful consideration of the phenomena in question
and the timescales (and lengthscales) on which they act must be made in order to
rigorously construct a model that is valid throughout the entire expansion.
The first two papers presented in this thesis iterate on the model established
in the paper that first predicted the electron-to-ion energy transfer; their aim
was to find out how the character of the expansion changes with a more
sophisticated and accurate description of various phenomena, while remaining
within the existing framework of expansion into vacuum. Ultimately, we find that
the qualitative character is unchanged, and that approximately half the heating
power deposited in plasmoid electrons is transferred to ions.
Two other papers in this thesis address the limitations of the original model.
This is achieved by properly considering the electron kinetic problem in a
plasmoid. One paper considers the electron kinetic problem when electrons are
highly isotropised. In this case the kinetic equation can be integrated to
remove all but two independent variables, which is the maximum possible
reduction considering it is a time-dependent problem. The full nonlinear
integro-differential Landau self-collision operator is integrated exactly and
few approximations are made, leading to a rather general kinetic equation.
However, for fuelling pellets some anisotropy in the electron distribution is
expected. Another paper considers the electron kinetic problem (and the entire
plasmoid expansion) allowing for electron anisotropy. Careful consideration of
the ordering of timescales of electron phenomena in a pellet plasmoid leads to a
steady-state kinetic problem that we call collisional quasi-equilibrium (QE). QE
appears in many ways similar to the collisional steady-state characterising a
true thermal equilibrium. It was found that the time-dependent kinetic problem
of the earlier paper, with isotropic electrons, produces the QE distribution
function, corroborating the existence of the QE state. We then take moments of
the electron kinetic equation that is valid on the expansion timescale, assuming
that the electron distribution is that given as the solution to the QE kinetic
problem. This is completely analogous to what is done to obtain the Braginskii
equations or any Chapman-Enskog theory. The result is a set of equations for the
long-term evolution of the macroscopic quantities that describe the distribution
function existing in a quasi-steady-state at each point in time. It is from this
point that one may feasibly describe the plasmoid expansion with an accurate
picture of the electron kinetics and finally obtain the electron-to-ion energy
transfer so desired in a rigorous model of the expansion.
From a broader point of view, the two frameworks provided by these rigorous
investigations of the electron kinetic problem serve as a basis for the future
study of plasmoids. Such a `first-principles' approach to plasmoid dynamics is
novel and interesting in its own right, but it will be demonstrated that such an
approach is essential for pellet plasmoids owing to the fact that they are
poorly described by the `standard tools' of plasma physics.
Using the QE framework it was found that, once more, about half the heating
power experienced by plasmoid electrons is transferred to plasmoid ions. The
incredible robustness of the prediction of such an energy transfer is, in the
author's opinion, the result of the self-similar nature of the expansion found
as a solution to the original model. As a rule, the profiles of self-similar
solutions tend to be attractors for the `real', more complicated, system, and
the qualitative predictions involving no parameters, of which the
electron-to-ion energy transfer is one, tend to be very sturdy.
Aside from fuelling pellets, composed of hydrogen or deuterium, one paper in
this thesis investigates the physics of high-Z pellets that are designed to
terminate the plasma safely in the event of a `disruption', where much of the
magnetic field energy is channelled into a runaway electron beam with
potentially disastrous consequences if the beam encounters a plasma-facing
component. The paper draws on the work carried out in the paper concerning the
kinetic problem of isotropised electrons in a plasmoid.
This thesis is `cumulative'; the vast majority of the work carried out is
described within a set of Papers, labelled A-E, placed at the back of the text.
There is a preceding `wrapper text' (given in numbered Sections) tasked with
introducing the reader to the topic, guiding the reader through the papers, and
expounding some of their main results. Some amount of material not present in
the papers is also provided in the wrapper text. Naturally, the wrapper text
mainly focusses on the results of the papers which are under my first
authorship. In the course of publishing papers over an extended period of time
the nomenclature is bound to vary. Although it is mostly consistent between the
papers, a few difference do arise, and the section `Common symbols and
subscripts' is provided in the frontmatter to alleviate confusion. Particular
care should be taken with the symbols x and z; both can refer to the
coordinate parallel to the magnetic field line, but in papers where z is used
for this purpose x tends to have another definition. In the wrapper text the
choice of symbols is generally chosen to reflect those in the corresponding
paper.
In this thesis, it was the subject to build a setup to study the interaction of clusters with intense laser light. A magnetron sputter cluster ion source was built to create metal clusters for the planned investigations. Furthermore, a linear Paul trap setup was built in order to allow the investigation of the mentioned interaction at one specific cluster size. The whole apparatus was characterized and first experiments were performed.
AbstractFluctuations of electron cyclotron emission (ECE) signals are analyzed for differently heated Wendelstein 7-X plasmas. The fluctuations appear to travel predominantly on flux surfaces and are used as ‘tracers’ in multivariate time series. Different statistical techniques are assessed to reveal the coupling and information entropy-based coupling analysis are conducted. All these techniques provide evidence that the fluctuation analysis allows one to check the consistency of magneto-hydrodynamic (MHD) equilibrium calculations. Expanding the suite of techniques applied in fusion data analysis, partial mutual information (PMI) analysis is introduced. PMI generalizes traditional partial correlation (Frenzel and Pompe Phys. Rev. Lett.
99 204101) and also Schreiber’s transfer entropy (Schreiber 2000 Phys. Rev. Lett.
85 461). The main additional capability of PMI is to allow one to discount for specific spurious data. Since PMI analysis allows one to study the effect of common drivers, the influence of the electron cyclotron resonance heating on the mutual dependencies of simultaneous ECE measurements was assessed. Additionally, MHD mode activity was found to be coupled in a limited volume in the plasma core for different plasmas. The study reveals an experimental test for equilibrium calculations and ECE radiation transport.
Die Forschung an mikrowelleninduzierten Atmosphärendruckplasmen am INP führte zu verschiedenen potentiellen Applikationen. Dabei besitzt die mikrobiologische Dekontamination sowohl von thermolabilen Medizinprodukten als auch von Lebensmitteln schon zum jetzigen Zeitpunkt ein hohes industrielles Anwendungspotential. Den aufgeführten Anwendungen gemeinsam ist, dass für eine erfolgreiche Weiterentwicklung der Prozesse, sowie der Plasmaquelle, ein grundlegendes Verständnis der vorliegenden dynamischen Mikrowellenplasmawechselwirkung notwendig ist. Durch den begrenzten diagnostischen Zugang der zu untersuchenden Plasmaquelle wird ein kombinierter Ansatz aus diagnostischen Methoden und Modellierung gewählt. Die Entladung wird in Argon bei reduziertem Druck (ab 10 mbar) zur Vereinfachung des Modells betrieben. Daher musste die Plasmaquelle für diesen Einsatz weiterentwickelt werden. Dieses beinhaltet die Neuauslegung der Prozesswärmeabfuhr, auf Grund der nicht oder nur teilweisen Anwendbarkeit von etablierten Verfahren im Atmosphärendruck (hohe Gasflüsse, Wasserkühlung). Die Plasmamikrowellenwechselwirkung dieser Quelle ist anschließend mit Methoden zur Charakterisierung des Plasmas und des Mikrowellenfeldes für unterschiedliche Arbeitspunkte in Druck und Leistung untersucht worden. Zur Bestimmung der Elektronendichte des Plasmas wurde ein frequenzvariables Mikrowelleninterferometer auf Basis eines Vektornetzwerkanalysators erstmalig etabliert. Dieses neue Messsystem wurde im Vorfeld detailliert untersucht, um das korrekte Zusammenspiel aller Komponenten zu überprüfen. In diesem Zusammenhang wurde ein frequenzaufgelöstes Mikrowelleninterferometer zur Messung der Elektronendichte in einer Fluoreszenzlampe aufgebaut. Durch diesen neuartigen Ansatz konnte der Einfluss der dielektrischen Umhüllung (Glasrohr der Lampe) auf die Mikrowelleninterferometrie untersucht werden. In einer weiteren Untersuchung an einem Induktiv Gekoppelten Plasma wurden die Resultate dieses Messsystems mit denen von Langmuir-Sondenmessungen. Auf Grund der konstruktiven Gegebenheiten des Reaktors ist das Plasma nur über ein Fenster für das Mikrowelleninterferometer zugänglich. Der Vergleich der ermittelten Elektronendichten ergab einen Unterschied von Faktor zwei zwischen Interferometer und Langmuir-Sonde. Die Untersuchungen an der Fluoreszenzlampe und dem Induktiv Gekoppelten Plasma zeigten zum einen die korrekte Funktion des neu etablierten frequenzvariablen Mikrowelleninterferometers mit erreichbaren Phasenauflösungen unterhalb von 0,1 mrad. Zum anderen wurde festgestellt, dass die dielektrische Umhüllung des Plasmas zu einem systematischen Fehler von bis 53 % bei der Elektronendichtebestimmung führen kann. Diese gewonnenen Erkenntnisse hatten bei der Konzipierung des Mikrowelleninterferometers zur Untersuchung der Plasmamikrowellenwechselwirkung einen entscheidenden Einfluss. Neben der Untersuchung des Plasmas ist ebenfalls eine Diagnostik des Mikrowellenfeldes nötig, um die Plasmamikrowellenwechselwirkung dieser Entladung experimentell zu charakterisieren. Auf Grundlage dieser Daten können die Resultate des Modells bewertet werden, die einen Einblick in die Plasmaquelle und ihrer dynamischen Vorgänge erlaubt, was für die Weiterentwicklung der Applikationen essentiell ist. Aus diesem Grund ist ein heterodynes Reflektometer entwickelt worden. Dieses Messsystem wurde umfangreich getestet und kann mit einer maximalen Zeitauflösung von 100 ns den komplexen Reflektionsfaktor mit einer Phasengenauigkeit von 10 mrad bestimmen. Das Reflektometer erlaubt einen experimentellen Zugang zur aktiven Zone schon in der Frühphase der Entladung. Mit Hilfe der Diagnostiken zur Untersuchung des Plasmas und des Mikrowellenfeldes wurde die Entladung von der Zündung bis zur stationären Phase charakterisiert und mit den Ergebnissen des Modells verglichen. Es zeigte sich eine gute Übereinstimmung im Millisekundenzeitbereich, sowie eine starke Dynamik im Reflektionsfaktor in der ersten Millisekunde, hervorgerufen durch die Plasmamikrowellenwechselwirkung. Durch die hohe Zeitauflösung des Reflektometers konnten diese Vorgänge im Mikrosekundenzeitbereich erstmalig experimentell aufgelöst werden, was die Interpretation mittels des Modells möglich macht. Es konnten die Vorgänge während der Zündung des Plasmas detailliert untersucht werden und damit die Richtigkeit von Annahmen, die bei der Entwicklung der Zündtechnologie getroffen wurden, überprüft werden. Dieses erworbene grundlegende Verständnis ermöglicht eine Weiterentwicklung dieser Technologie. Mit Hilfe der erzielten Ergebnisse wurde eine neue Optimierungsstrategie für die Abstimmung der Mikrowellenplasmaquelle entwickelt. Dies führte zu einer wesentlichen Verbesserung der Reproduzierbarkeit der mikrobiologischen Ergebnisse. Darüber hinaus bilden die erzielten Ergebnisse eine solide Grundlage für weitere experimentelle und theoretische Untersuchungen dieser Entladung in beispielsweise anderen Arbeitsgasen.